Tiejun Tao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Tiejun Tao has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
Caijin Xie
12 shared publicationsXingchao Tian
College of Civil Engineering, Transportation and Water Conservancy, Guizhou Institute of Technology, Guiyang, China
11 shared publications- Caijin Xie
College of Civil Engineering Guizhou University Guiyang 550025 China gzu.edu.cn
6 shared publications Jian Jia
Guizhou Power Transmission and Transformation Company, Guiyang, China
6 shared publicationsAntong Wan
College of Civil Engineering, Guizhou University, Guiyang, China
4 shared publications- Xingchao Tian
School of Civil Engineering, Transportation and Water Conservancy, Guizhou Institute of Technology, Guiyang 550025, China
4 shared publications
Latest Publications
- Open Access
- 19 May 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Research on improved nonlinear viscoelastic-plastic damage model of rock and parameter identification
How to accurately characterize the nonlinear characteristics of rock mass creep has long been a research hotspot. The traditional Kelvin model cannot accurately characterize the nonlinear variation process in the decay creep stage and the dual characteristics of power function and exponential function in the accelerated creep stage, so it needs to be modified. Based on nonlinear rheological theory and damage theory, this paper establishes a damage creep model that simultaneously considers instantaneous elastic strain, nonlinear viscoelastic strain, viscous strain, and nonlinear viscoplastic strain. The differential damage constitutive equations under one-dimensional and three-dimensional stress states are derived, the method for determining model parameters is presented, and the model is verified based on the triaxial compression creep test results of sandstone. Meanwhile, a sensitivity analysis is performed on the parameters of the modified model. The results show that the modified model can accurately reflect the entire creep process of sandstone under different confining pressures. In uniaxial compression creep tests, the peak strain is most sensitive to changes in the parameters η₂ and η₄. Under high confining pressure, the peak strain is most sensitive to changes in the parameters β, n, and η₄.
- 19 May 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Open AccessResearch on improved nonlinear viscoelastic-plastic damage model of rock and parameter identification
How to accurately characterize the nonlinear characteristics of rock mass creep has long been a research hotspot. The traditional Kelvin model cannot accurately characterize the nonlinear variation process in the decay creep stage and the dual characteristics of power function and exponential function in the accelerated creep stage, so it needs to be modified. Based on nonlinear rheological theory and damage theory, this paper establishes a damage creep model that simultaneously considers instantaneous elastic strain, nonlinear viscoelastic strain, viscous strain, and nonlinear viscoplastic strain. The differential damage constitutive equations under one-dimensional and three-dimensional stress states are derived, the method for determining model parameters is presented, and the model is verified based on the triaxial compression creep test results of sandstone. Meanwhile, a sensitivity analysis is performed on the parameters of the modified model. The results show that the modified model can accurately reflect the entire creep process of sandstone under different confining pressures. In uniaxial compression creep tests, the peak strain is most sensitive to changes in the parameters η₂ and η₄. Under high confining pressure, the peak strain is most sensitive to changes in the parameters β, n, and η₄.
- Open Access
- 5 March 2026
- Published by Springer Nature in Geomechanics and Geophysics for Geo-Energy and Geo-Resources
- Vol. 12 (1)
Study on mechanical properties and crack evolution law of thin layered slate considering soft and hard interbedded structure
- 5 March 2026
- Published by Springer Nature in Geomechanics and Geophysics for Geo-Energy and Geo-Resources
- Vol. 12 (1)
Open AccessStudy on mechanical properties and crack evolution law of thin layered slate considering soft and hard interbedded structure
- 9 February 2026
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 49 (5) , 1625-1643
Influence of Crustal Stress on Explosion Crack Propagation Behavior and Application in Shallow and Deep Buried Tunnel Engineering
Rational utilization of the guiding effect of crustal stress on explosive crack can significantly enhance blasting efficiency. This paper modified the calculation models for the crushed zone and fractured zone in tunnels at different burial depths and validated the models using numerical simulation methods. The influencing factors of blasting crack extension in deep and shallow buried roadways were analyzed, and the guiding significance of crack extension characteristics on the design of blasthole mesh parameters was discussed. The results show that the error in the theoretical calculations is controlled within 6%, indicating a high degree of accuracy. The longest radial main cracks appeared in the directions of 75°–90°, 70°–72°, and 74° in the blast holes for burial depths H ≤ h q , h q < H ≤ H P , and H > H P , respectively. Blasting yields optimal results when the blasthole alignment follows the direction of main fracture propagation.
- 9 February 2026
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 49 (5) , 1625-1643
Influence of Crustal Stress on Explosion Crack Propagation Behavior and Application in Shallow and Deep Buried Tunnel Engineering
Rational utilization of the guiding effect of crustal stress on explosive crack can significantly enhance blasting efficiency. This paper modified the calculation models for the crushed zone and fractured zone in tunnels at different burial depths and validated the models using numerical simulation methods. The influencing factors of blasting crack extension in deep and shallow buried roadways were analyzed, and the guiding significance of crack extension characteristics on the design of blasthole mesh parameters was discussed. The results show that the error in the theoretical calculations is controlled within 6%, indicating a high degree of accuracy. The longest radial main cracks appeared in the directions of 75°–90°, 70°–72°, and 74° in the blast holes for burial depths H ≤ h q , h q < H ≤ H P , and H > H P , respectively. Blasting yields optimal results when the blasthole alignment follows the direction of main fracture propagation.
- Open Access
- 29 January 2026
- Published by Elsevier in Journal of Rock Mechanics and Geotechnical Engineering
Impact responses of layered rocks in tunnel excavations: Hydro-mechanical analysis
- 29 January 2026
- Published by Elsevier in Journal of Rock Mechanics and Geotechnical Engineering
Open AccessImpact responses of layered rocks in tunnel excavations: Hydro-mechanical analysis
- Open Access
- 12 August 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-17
Modification and validation of cracked zone range under coupled in-situ stress and blasting load
Exploring the characteristics of blasting crack propagation under the action of in-situ stress is of great significance for guiding the layout of blast holes on site. This paper proposed a modified calculation method for the range of crushed zone and cracked zone under the action of in-situ stress based on the coupled stress distribution characteristics of in-situ stress and blasting load. A numerical simulation model for single hole blasting was established based on the Holmquist-Johnson–Cook (HJC) model, and the modified method was validated. Meanwhile, the influence of burial depth and lateral pressure coefficient on crack propagation characteristics was analyzed, and the effects of axial loading coefficient, lateral pressure coefficient, dynamic compressive strength, and dynamic tensile strength on the range of crushed zone and cracked zone were studied. It is concluded that the modified theoretical calculation method predicts the crack extension length and direction with high accuracy, and the errors with the numerical simulation results are controlled at 5.5% and 4°, respectively. Under the action of coupled stress field, the crack length in various directions of the blasthole show non-uniform distribution, and the tangent value of the angle between the longest radial main crack and the vertical direction and the lateral pressure coefficient are basically the same. The research results can provide reference for the design of deep rock blasting parameters and the improvement of explosive utilization efficiency.
- 12 August 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-17
Open AccessModification and validation of cracked zone range under coupled in-situ stress and blasting load
Exploring the characteristics of blasting crack propagation under the action of in-situ stress is of great significance for guiding the layout of blast holes on site. This paper proposed a modified calculation method for the range of crushed zone and cracked zone under the action of in-situ stress based on the coupled stress distribution characteristics of in-situ stress and blasting load. A numerical simulation model for single hole blasting was established based on the Holmquist-Johnson–Cook (HJC) model, and the modified method was validated. Meanwhile, the influence of burial depth and lateral pressure coefficient on crack propagation characteristics was analyzed, and the effects of axial loading coefficient, lateral pressure coefficient, dynamic compressive strength, and dynamic tensile strength on the range of crushed zone and cracked zone were studied. It is concluded that the modified theoretical calculation method predicts the crack extension length and direction with high accuracy, and the errors with the numerical simulation results are controlled at 5.5% and 4°, respectively. Under the action of coupled stress field, the crack length in various directions of the blasthole show non-uniform distribution, and the tangent value of the angle between the longest radial main crack and the vertical direction and the lateral pressure coefficient are basically the same. The research results can provide reference for the design of deep rock blasting parameters and the improvement of explosive utilization efficiency.
- Open Access
- 8 April 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-19
Numerical study on the fragmentation of rock under single free face explosion of variable diameter decoupled charge
In the conventional radial uncoupled charge single free surface blasting, the bottom rock mass is difficult to be fully broken, which affects the blasting effect and restricts the tunneling efficiency. This difficulty adversely impacts the blasting outcome and limits the efficiency of excavation. To address this issue, this paper proposes a solution that involves modifying the charge structure to implement a variable diameter decoupled charge, and it analyzes the theoretical feasibility of this approach. The variably diameter decoupled charge and radial decoupled charge single-hole blasting model was established and compared using LS-DYNA. Furthermore, the effects of various parameters on the rock-breaking efficiency of variable diameter decoupled charges were analyzed. The results show that, in comparison to radially decoupled charges, variable diameter decoupled charges exhibit a greater explosive mass at their base. This enhancement leads to an increase in the effective stress on the surrounding rock, thereby effectively addressing the issue of inadequate fragmentation of the rock mass at the base of radially decoupled charges. Simultaneously, the directional effect of stress wave superposition and the balancing effect of the cavity on internal pressure contribute to an increase in the effective stress and reflected tensile stress of the overlying rock mass. This phenomenon ensures that effective fragmentation of the overlying rock mass can still be achieved, even with a relatively small amount of explosive charge. Under the condition of maintaining the same charge weight and borehole diameter, increasing the length and radius of the expanding section of the explosive significantly impacts rock fragmentation, whereas reducing the radius of the contracting section has a minimal effect. In engineering applications with a common borehole diameter of 4.2 cm, when the length of the expanding section of the explosive charge is half of the total charge length and the radius of the expanding section ranges from 1.65 cm to 1.70 cm, more effective rock fragmentation at the bottom can be achieved, resulting in an overall favorable fragmentation outcome.
- 8 April 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-19
Open AccessNumerical study on the fragmentation of rock under single free face explosion of variable diameter decoupled charge
In the conventional radial uncoupled charge single free surface blasting, the bottom rock mass is difficult to be fully broken, which affects the blasting effect and restricts the tunneling efficiency. This difficulty adversely impacts the blasting outcome and limits the efficiency of excavation. To address this issue, this paper proposes a solution that involves modifying the charge structure to implement a variable diameter decoupled charge, and it analyzes the theoretical feasibility of this approach. The variably diameter decoupled charge and radial decoupled charge single-hole blasting model was established and compared using LS-DYNA. Furthermore, the effects of various parameters on the rock-breaking efficiency of variable diameter decoupled charges were analyzed. The results show that, in comparison to radially decoupled charges, variable diameter decoupled charges exhibit a greater explosive mass at their base. This enhancement leads to an increase in the effective stress on the surrounding rock, thereby effectively addressing the issue of inadequate fragmentation of the rock mass at the base of radially decoupled charges. Simultaneously, the directional effect of stress wave superposition and the balancing effect of the cavity on internal pressure contribute to an increase in the effective stress and reflected tensile stress of the overlying rock mass. This phenomenon ensures that effective fragmentation of the overlying rock mass can still be achieved, even with a relatively small amount of explosive charge. Under the condition of maintaining the same charge weight and borehole diameter, increasing the length and radius of the expanding section of the explosive significantly impacts rock fragmentation, whereas reducing the radius of the contracting section has a minimal effect. In engineering applications with a common borehole diameter of 4.2 cm, when the length of the expanding section of the explosive charge is half of the total charge length and the radius of the expanding section ranges from 1.65 cm to 1.70 cm, more effective rock fragmentation at the bottom can be achieved, resulting in an overall favorable fragmentation outcome.
- Open Access
- 27 March 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-15
A dynamic damage constitutive model considering the effect of joint inclination on the modulus of elasticity of slates
The dynamic damage constitutive model has limitations and needs to reflect the quantitative relationship between the elastic modulus and joint inclination angle of the slate. This paper constructs a dynamic damage constitutive model considering the influence of joint inclination on the elastic modulus of slate. First, the slate impact test reveals the changing law of the elastic modulus of slate under different joint inclination angles. The elastic modulus of slate with joint inclination angle shows a “U” type changing law, and the elastic modulus is the smallest when the joint inclination angle is 52.5°, and the elastic modulus is relatively larger when 0° and 90°. The mathematical model of slate joint inclination and elastic modulus was obtained by fitting the test data, and the fitting accuracy reached 94.86%. Then, the dynamic damage constitutive model of slate was established based on the statistical distribution theory, and the quantitative relationship between joint inclination and elastic modulus was introduced into the damage eigen structure equation to correct the elastic modulus. Finally, comparing the theoretical calculations with the experimental results, the stress–strain curves of the slate before damage are in good agreement, proving the model’s rationality in this paper.
- 27 March 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-15
Open AccessA dynamic damage constitutive model considering the effect of joint inclination on the modulus of elasticity of slates
The dynamic damage constitutive model has limitations and needs to reflect the quantitative relationship between the elastic modulus and joint inclination angle of the slate. This paper constructs a dynamic damage constitutive model considering the influence of joint inclination on the elastic modulus of slate. First, the slate impact test reveals the changing law of the elastic modulus of slate under different joint inclination angles. The elastic modulus of slate with joint inclination angle shows a “U” type changing law, and the elastic modulus is the smallest when the joint inclination angle is 52.5°, and the elastic modulus is relatively larger when 0° and 90°. The mathematical model of slate joint inclination and elastic modulus was obtained by fitting the test data, and the fitting accuracy reached 94.86%. Then, the dynamic damage constitutive model of slate was established based on the statistical distribution theory, and the quantitative relationship between joint inclination and elastic modulus was introduced into the damage eigen structure equation to correct the elastic modulus. Finally, comparing the theoretical calculations with the experimental results, the stress–strain curves of the slate before damage are in good agreement, proving the model’s rationality in this paper.
- 28 June 2024
- Published by Springer Nature in Archive of Applied Mechanics
- Vol. 94 (8) , 2355-2368
Transverse isotropic slate damage modeling under triaxial compression conditions
- 28 June 2024
- Published by Springer Nature in Archive of Applied Mechanics
- Vol. 94 (8) , 2355-2368
Transverse isotropic slate damage modeling under triaxial compression conditions
- Open Access
Analysis of blasting vibration duration considering frequency and energy and its application
- 10 June 2024
- Published by Springer Nature in International Journal of Civil Engineering
- Vol. 22 (11) , 2109-2127
Experimental Study on the Dynamic Mechanical Properties and Critical Crushing Energy Dissipation Characteristics of Rocks Under Three-Dimensional Dynamic–Static Combinations of Loading Scenarios
- 10 June 2024
- Published by Springer Nature in International Journal of Civil Engineering
- Vol. 22 (11) , 2109-2127
Experimental Study on the Dynamic Mechanical Properties and Critical Crushing Energy Dissipation Characteristics of Rocks Under Three-Dimensional Dynamic–Static Combinations of Loading Scenarios