Shervin Adabi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Shervin Adabi has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Abbas Shahsavani
Air Quality and Climate Change Research Center, Shahid Beheshti University of Medical Sciences, Tehran, Iran
1 shared publication - Ahmadreza Yazdanbakhsh
Department of Environmental Health Engineering, School of Public Health and Safety, Shahid Beheshti University of Medical Sciences, Tehran, Iran
1 shared publication Akbar Eslami
Environmental and Occupational Hazards Control Research Center Shahid Beheshti University of Medical Sciences Tehran Iran
1 shared publication- Akbar Eslami
Environmental and Occupational Hazards Control Research Center, Shahid Beheshti University of Medical Sciences, Tehran, Iran
1 shared publication - Amir Sheikhmohammadi
Department of Environmental Health Engineering, School of Health, Khoy University of Medical Sciences, Khoy, Iran
1 shared publication - Mahdi Hadi
Center for Water Quality Research (CWQR), Institute for Environmental Research (IER), Tehran University of Medical Sciences, Tehran, Iran
1 shared publication
Latest Publications
- 7 June 2023
- Published by Springer Nature in Journal of Environmental Health Science and Engineering
- Vol. 21 (2) , 305-318
Removal of heavy metals from the aqueous solution by nanomaterials: a review with analysing and categorizing the studies
With the development of nanotechnology and its application in various sciences, scientists have investigated the use of nanoparticles as adsorbents to remove heavy metals from aqueous solutions all over the world. So far, the results of many of these studies have been published in reputable journals. Obviously, reviewing these articles and summarizing the results of these studies from different aspects will provide new perspectives for the development of this technology for heavy metals removal from water. So the current study was performed to review the results of the published studies between 1/January/1980 to 1/January/2022. The focus of the study is on the analysis of these studies and their classification. In addition, a more detailed investigation was carried out. Among the 5155 articles, 576 articles were included based on Cochrane protocols. Results show that most of the studies (90.8%) were conducted on a laboratory scale and used synthetic solutions. Most studies were performed for Pb, Cd and Cu, removal respectively. Compared to other countries, authors with affiliation from China and Iran have published more articles. The ranking of the use of various nanomaterials were: nanocomposites > metal oxide nanomaterials > metal-based nanomaterials > carbon-based nanomaterials > dendrimers, with the wide range of sizes from less than 10 nm to several hundreds of nanometers. The required amount of carbon-based nanoparticles to remove many heavy metals were lower than other nanoparticles. In most studies, pH ≤ 7 has been reported as optimal. Most studies have been followed pseudo second-order and pseudo first-order reactions and have been more agreement with Langmuir and Freundlich adsorption isotherms respectively. The results of studies show that the synthesis and optimization of new nanomaterials can be considered as a new and competitive technology. However, more studies are needed to investigate the removal of heavy metals in real samples and to overcome some challenges in the full-scale application.
- 7 June 2023
- Published by Springer Nature in Journal of Environmental Health Science and Engineering
- Vol. 21 (2) , 305-318
Removal of heavy metals from the aqueous solution by nanomaterials: a review with analysing and categorizing the studies
With the development of nanotechnology and its application in various sciences, scientists have investigated the use of nanoparticles as adsorbents to remove heavy metals from aqueous solutions all over the world. So far, the results of many of these studies have been published in reputable journals. Obviously, reviewing these articles and summarizing the results of these studies from different aspects will provide new perspectives for the development of this technology for heavy metals removal from water. So the current study was performed to review the results of the published studies between 1/January/1980 to 1/January/2022. The focus of the study is on the analysis of these studies and their classification. In addition, a more detailed investigation was carried out. Among the 5155 articles, 576 articles were included based on Cochrane protocols. Results show that most of the studies (90.8%) were conducted on a laboratory scale and used synthetic solutions. Most studies were performed for Pb, Cd and Cu, removal respectively. Compared to other countries, authors with affiliation from China and Iran have published more articles. The ranking of the use of various nanomaterials were: nanocomposites > metal oxide nanomaterials > metal-based nanomaterials > carbon-based nanomaterials > dendrimers, with the wide range of sizes from less than 10 nm to several hundreds of nanometers. The required amount of carbon-based nanoparticles to remove many heavy metals were lower than other nanoparticles. In most studies, pH ≤ 7 has been reported as optimal. Most studies have been followed pseudo second-order and pseudo first-order reactions and have been more agreement with Langmuir and Freundlich adsorption isotherms respectively. The results of studies show that the synthesis and optimization of new nanomaterials can be considered as a new and competitive technology. However, more studies are needed to investigate the removal of heavy metals in real samples and to overcome some challenges in the full-scale application.
- 21 March 2022
- Published by Wiley in Environmental Progress & Sustainable Energy
- Vol. 41 (4)
Mechanochemical dechlorination of petrochemical sludge through a planetary ball mill and using industrial wastes as additives
Mechanochemical treatment causes the formation of mineral Cl compounds during the degradation of polychlorinated compounds by planetary ball mill. In the present study, the three types of industrial waste comprising of sludge from petrochemical wastewater treatment plants as source of pollutants, scrap iron and petrochemical water treatment plant sludge as co‐milling reagents were used. The raw samples and the milled products were analyzed by gas chromatography–mass spectrometry, Fourier transform infrared spectroscopy, Raman Spectroscopy, and X‐ray diffraction. Further analyses such as ion chromatography and X‐ray fluorescence were performed. The analysis results confirmed that the milling process degraded persistent organic pollutants and showed that major changes occurred in the organic phases, carbon and chlorine bonds. The yield of chloride ions was investigated using Ion Chromatography. The highest percentage of de‐Cl products (95.6%) was achieved after 6 h in equal proportions of reagents. Furthermore, CaCl2 and FeCl2 were present in the final milling product.
- 21 March 2022
- Published by Wiley in Environmental Progress & Sustainable Energy
- Vol. 41 (4)
Mechanochemical dechlorination of petrochemical sludge through a planetary ball mill and using industrial wastes as additives
Mechanochemical treatment causes the formation of mineral Cl compounds during the degradation of polychlorinated compounds by planetary ball mill. In the present study, the three types of industrial waste comprising of sludge from petrochemical wastewater treatment plants as source of pollutants, scrap iron and petrochemical water treatment plant sludge as co‐milling reagents were used. The raw samples and the milled products were analyzed by gas chromatography–mass spectrometry, Fourier transform infrared spectroscopy, Raman Spectroscopy, and X‐ray diffraction. Further analyses such as ion chromatography and X‐ray fluorescence were performed. The analysis results confirmed that the milling process degraded persistent organic pollutants and showed that major changes occurred in the organic phases, carbon and chlorine bonds. The yield of chloride ions was investigated using Ion Chromatography. The highest percentage of de‐Cl products (95.6%) was achieved after 6 h in equal proportions of reagents. Furthermore, CaCl2 and FeCl2 were present in the final milling product.
- Open Access
- 21 February 2022
- Published by Taylor & Francis in International Journal of Environmental Analytical Chemistry
- Vol. 104 (7) , 1580-1594
Dechlorination of persistent organic pollutants in petrochemical wastewater sludge through a planetary ball mill using synthesized nanocomposite
Numerous tons of hazardous wastes containing persistent organic pollutants (POPs) are stored in an unsafe manner in the petrochemical industries. The planetary ball mill causes the formation of mineral Cl compounds during the degradation of polychlorinated compounds in the presence of various reagents. In addition, the planetary ball mill has been applied for the synthesis of diverse organic-inorganic hybrid nanomaterials. In the present study, Fe-metal organic framework was prepared using a planetary ball mill, and then Fe@C nanocomposite with core/shell structure was synthesised by carbonisation. X-ray diffraction (XRD) and field emission scanning electron microscope (FESEM) and transmission electron microscope (TEM) were utilised to study the synthesised materials. The nanocomposite was used as a reagent to degrade persistent organic pollutants in the sludge of a petrochemical wastewater treatment plant by a planetary ball mill. CaO was also used to compare the effect of nanocomposites on system performance. Ion chromatography (IC) analysis was carried out to determine chlorine mineralisation. Furthermore, Fourier transform infrared spectroscopy (FTIR) and Raman spectroscopy were applied to determine chemical bonds. The results illustrated a zero-valent iron nanoparticle in the core protected by carbon shell in a synthesised nanocomposite with a core/shell structure. Hence, nanocomposite was the most efficient additive, with 97% dechlorination efficiency in the first hour while the efficiency of the planetary ball mill in the presence of CaO was only 76% after 12 hours of milling. Furthermore, major changes occurred in the organic phases, carbon and chlorine bonds. Simultaneously, graphite and amorphous carbon were produced in the final products after milling. This indicates that aromatic structures and C-Cl bonds were broken down into inorganic compounds. Thus, this study presented a practical method of producing materials while degrading hazardous pollutants in petrochemical wastewater sludge through a planetary ball mill. Graphical abstract
- 21 February 2022
- Published by Taylor & Francis in International Journal of Environmental Analytical Chemistry
- Vol. 104 (7) , 1580-1594
Open AccessDechlorination of persistent organic pollutants in petrochemical wastewater sludge through a planetary ball mill using synthesized nanocomposite
Numerous tons of hazardous wastes containing persistent organic pollutants (POPs) are stored in an unsafe manner in the petrochemical industries. The planetary ball mill causes the formation of mineral Cl compounds during the degradation of polychlorinated compounds in the presence of various reagents. In addition, the planetary ball mill has been applied for the synthesis of diverse organic-inorganic hybrid nanomaterials. In the present study, Fe-metal organic framework was prepared using a planetary ball mill, and then Fe@C nanocomposite with core/shell structure was synthesised by carbonisation. X-ray diffraction (XRD) and field emission scanning electron microscope (FESEM) and transmission electron microscope (TEM) were utilised to study the synthesised materials. The nanocomposite was used as a reagent to degrade persistent organic pollutants in the sludge of a petrochemical wastewater treatment plant by a planetary ball mill. CaO was also used to compare the effect of nanocomposites on system performance. Ion chromatography (IC) analysis was carried out to determine chlorine mineralisation. Furthermore, Fourier transform infrared spectroscopy (FTIR) and Raman spectroscopy were applied to determine chemical bonds. The results illustrated a zero-valent iron nanoparticle in the core protected by carbon shell in a synthesised nanocomposite with a core/shell structure. Hence, nanocomposite was the most efficient additive, with 97% dechlorination efficiency in the first hour while the efficiency of the planetary ball mill in the presence of CaO was only 76% after 12 hours of milling. Furthermore, major changes occurred in the organic phases, carbon and chlorine bonds. Simultaneously, graphite and amorphous carbon were produced in the final products after milling. This indicates that aromatic structures and C-Cl bonds were broken down into inorganic compounds. Thus, this study presented a practical method of producing materials while degrading hazardous pollutants in petrochemical wastewater sludge through a planetary ball mill. Graphical abstract