Igor Leonidovich Kanev
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Igor Leonidovich Kanev has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Olga Yurievna Antonova
Institute of Theoretical and Experimental Biophysics of the Russian Academy of Sciences, 3 Institutskaya Str., Pushchino 142290, Russia
3 shared publications - Olga Yu. Kochetkova
Institute of Theoretical and Experimental Biophysics of the Russian Academy of Sciences, 3 Institutskaya Str., Pushchino 142290, Russia
2 shared publications - Yuri M. Shlyapnikov
Institute of Theoretical and Experimental Biophysics, Russian Academy of Sciences, Pushchino, Russia
2 shared publications - Aleksey S. Kononikhin
V.I. Kulakov National Medical Research Center for Obstetrics Gynecology and Perinatology, Ministry of Healthcare of Russian Federation, 117997 Moscow, Russia
1 shared publication - Alexander Vladimirovich Rogachev
National Research Center Kurchatov Institute 2 , Moscow
1 shared publication - Anna E. Bugrova
V.I. Kulakov National Medical Research Center for Obstetrics Gynecology and Perinatology, Ministry of Healthcare of Russian Federation, 117997 Moscow, Russia
1 shared publication
Latest Publications
- 19 September 2025
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 8 (10) , 9480-9495
ECM-Mimetic Nanofibrous Scaffolds for Stimulation of Dorsal Root Ganglia Axon Guidance and Schwann Cell Maturation
The high prevalence of peripheral nerve injuries underscores the importance of finding materials capable of accelerating nerve tissue regeneration. Anisotropic fibrous nanomaterials produced by electrospinning are promising elements for the development of artificial nerve conduits (ANCs), as oriented nanofibers can mimic the nanoscale components (<100 nm) of the extracellular matrix (ECM) and thus enhance the regenerative process by directing the growth of nerve fibers. In this study, we investigated the effect of the nanostructure of scaffolds made of highly oriented nylon fibers with diameters of 60 and 200 nm on the growth of nerve tissue cells (Schwann cells (SCs) and neurons from dorsal root ganglia (DRG)). It was shown that such nanoscale fibers can regulate the morphology of SCs and DRG axons by orchestrating cytoskeletal reorganization and initiating cell process growth. Anisotropic fibrous scaffolds guiding SC growth facilitate the formation of structures mimicking Büngner's bands, which promote accelerated axon growth in an ex vivo co-culture model. For the first time, the influence of the topology of the artificial matrix on the aging of SC cultures in vitro was examined. The best regenerative potential was demonstrated by substrates made of a composite two-layer material, combining the advantages of nano- and sub-micron fibers. The composite material may be promising for use as a filler for ANCs and as a matrix for creating a preseeded tissue-engineered construct with donor SCs.
- 19 September 2025
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 8 (10) , 9480-9495
ECM-Mimetic Nanofibrous Scaffolds for Stimulation of Dorsal Root Ganglia Axon Guidance and Schwann Cell Maturation
The high prevalence of peripheral nerve injuries underscores the importance of finding materials capable of accelerating nerve tissue regeneration. Anisotropic fibrous nanomaterials produced by electrospinning are promising elements for the development of artificial nerve conduits (ANCs), as oriented nanofibers can mimic the nanoscale components (<100 nm) of the extracellular matrix (ECM) and thus enhance the regenerative process by directing the growth of nerve fibers. In this study, we investigated the effect of the nanostructure of scaffolds made of highly oriented nylon fibers with diameters of 60 and 200 nm on the growth of nerve tissue cells (Schwann cells (SCs) and neurons from dorsal root ganglia (DRG)). It was shown that such nanoscale fibers can regulate the morphology of SCs and DRG axons by orchestrating cytoskeletal reorganization and initiating cell process growth. Anisotropic fibrous scaffolds guiding SC growth facilitate the formation of structures mimicking Büngner's bands, which promote accelerated axon growth in an ex vivo co-culture model. For the first time, the influence of the topology of the artificial matrix on the aging of SC cultures in vitro was examined. The best regenerative potential was demonstrated by substrates made of a composite two-layer material, combining the advantages of nano- and sub-micron fibers. The composite material may be promising for use as a filler for ANCs and as a matrix for creating a preseeded tissue-engineered construct with donor SCs.
- Open Access
- 18 June 2025
- Published by ECO-Vector LLC (Publications) in Genes & Cells
- Vol. 20 (2) , 106-119
Modeling the interaction of aerosol particles with lung epithelial cells using the lung-on-a-chip platform
BACKGROUND: The assessment of inhalation toxicity of natural and artificial aerosols and the efficacy of aerosolized drugs is an important practical task. However, in numerous in vitro studies, the test substance is dissolved in a liquid that completely covers the lung tissue cells. For inhalation therapy, this method substantially differs from the physiological scenario of aerosol interaction with the pulmonary epithelium. AIM: The aim is to develop a platform to study the interaction of inhaled aerosol particles with the pulmonary epithelium on the internal surface of the lung alveoli at the liquid–air interface capable of simulating scenarios of periodic variation of liquid levels during breathing. METHODS: The A549 human adenocarcinoma cell line was used as a model culture of pulmonary epithelial cells. Cell viability was analyzed using fluorescent microscopy under various exposure conditions at the liquid–air interface and during the deposition of different aerosol particles. RESULTS: A device has been designed, built, and tested to simulate the internal surface of pulmonary alveoli. It consists of a cell layer located at the air–liquid interface. The cells are cultured on a porous polymer membrane on the surface of a reservoir with culture medium. The hydration level of the cells is controlled by altering the liquid pressure beneath the membrane and recorded by an optical sensor that measures the scattering of laser beam reflected from the surface of the cell layer. The membrane with the cell layer is placed in a chamber allowing to create a directed electric field normal to the aerosol flow passing over the cell layer, which is connected to one electrode. The electric field significantly accelerates the delivery of aerosol particles with an electric charge onto the cell surface. We determined the parameters of static exposure of the model cell monolayer at the air–liquid interface, allowing to maintain high cell viability. The study showed that cyclic variation of cell hydration simulating the respiratory cycle is effective to maintain cell viability for an extended period (60 min). The study showed that doxorubicin nanoaerosol is effective when deposited on the surface of human adenocarcinoma tumor cells located at the liquid–air phase boundary. A model aerosol of a non-toxic substance (glucose) does not have toxic effects under similar conditions. CONCLUSION: The proposed lung-on-a-chip model is a comprehensive platform to study the inhalation toxicity of natural and artificial aerosols and test the safety and efficacy of aerosolized drugs in situ.
- 18 June 2025
- Published by ECO-Vector LLC (Publications) in Genes & Cells
- Vol. 20 (2) , 106-119
Open AccessModeling the interaction of aerosol particles with lung epithelial cells using the lung-on-a-chip platform
BACKGROUND: The assessment of inhalation toxicity of natural and artificial aerosols and the efficacy of aerosolized drugs is an important practical task. However, in numerous in vitro studies, the test substance is dissolved in a liquid that completely covers the lung tissue cells. For inhalation therapy, this method substantially differs from the physiological scenario of aerosol interaction with the pulmonary epithelium. AIM: The aim is to develop a platform to study the interaction of inhaled aerosol particles with the pulmonary epithelium on the internal surface of the lung alveoli at the liquid–air interface capable of simulating scenarios of periodic variation of liquid levels during breathing. METHODS: The A549 human adenocarcinoma cell line was used as a model culture of pulmonary epithelial cells. Cell viability was analyzed using fluorescent microscopy under various exposure conditions at the liquid–air interface and during the deposition of different aerosol particles. RESULTS: A device has been designed, built, and tested to simulate the internal surface of pulmonary alveoli. It consists of a cell layer located at the air–liquid interface. The cells are cultured on a porous polymer membrane on the surface of a reservoir with culture medium. The hydration level of the cells is controlled by altering the liquid pressure beneath the membrane and recorded by an optical sensor that measures the scattering of laser beam reflected from the surface of the cell layer. The membrane with the cell layer is placed in a chamber allowing to create a directed electric field normal to the aerosol flow passing over the cell layer, which is connected to one electrode. The electric field significantly accelerates the delivery of aerosol particles with an electric charge onto the cell surface. We determined the parameters of static exposure of the model cell monolayer at the air–liquid interface, allowing to maintain high cell viability. The study showed that cyclic variation of cell hydration simulating the respiratory cycle is effective to maintain cell viability for an extended period (60 min). The study showed that doxorubicin nanoaerosol is effective when deposited on the surface of human adenocarcinoma tumor cells located at the liquid–air phase boundary. A model aerosol of a non-toxic substance (glucose) does not have toxic effects under similar conditions. CONCLUSION: The proposed lung-on-a-chip model is a comprehensive platform to study the inhalation toxicity of natural and artificial aerosols and test the safety and efficacy of aerosolized drugs in situ.
- Open Access
Antitumor Effect of Bleomycin Nanoaerosol in Murine Carcinoma Model
Bleomycin, which is widely used as an antitumor agent, possesses serious adverse effects such as pulmonary toxicity. Local nanoaerosol deposition for lung cancer treatment is a promising alternative to drug delivery to lung lesions. The aim of this work is to test the hypothesis that bleomycin nanoaerosol can be effectively used to treat multiple lung metastases. To obtain bleomycin nanoaerosol, an aerosol generator based on electrospray of a solution of a nonvolatile substance with gas-phase neutralization of charged aerosol particles was used. Lung metastases in murine Lewis lung carcinoma and B16 melanoma animal models were counted. The effect of inhaled bleomycin nanoparticles on the number and volume of metastases, as well as pulmonary side effects, was investigated. Using a mouse exposure chamber, the dose-dependent effect of inhaled bleomycin on tumor volume was evaluated in comparison with intraperitoneal administration. Bleomycin nanoaerosol reduced the volume of metastases and produced a higher antitumor effect at much lower doses. It has been established that long-term exposure to nanoaerosol with a low dose of bleomycin is capable of suppressing cancer cell growth. The treatment was well tolerated. In the lungs, minor changes were found in the form of focal-diffuse infiltration of the lung parenchyma.
Open AccessAntitumor Effect of Bleomycin Nanoaerosol in Murine Carcinoma Model
Bleomycin, which is widely used as an antitumor agent, possesses serious adverse effects such as pulmonary toxicity. Local nanoaerosol deposition for lung cancer treatment is a promising alternative to drug delivery to lung lesions. The aim of this work is to test the hypothesis that bleomycin nanoaerosol can be effectively used to treat multiple lung metastases. To obtain bleomycin nanoaerosol, an aerosol generator based on electrospray of a solution of a nonvolatile substance with gas-phase neutralization of charged aerosol particles was used. Lung metastases in murine Lewis lung carcinoma and B16 melanoma animal models were counted. The effect of inhaled bleomycin nanoparticles on the number and volume of metastases, as well as pulmonary side effects, was investigated. Using a mouse exposure chamber, the dose-dependent effect of inhaled bleomycin on tumor volume was evaluated in comparison with intraperitoneal administration. Bleomycin nanoaerosol reduced the volume of metastases and produced a higher antitumor effect at much lower doses. It has been established that long-term exposure to nanoaerosol with a low dose of bleomycin is capable of suppressing cancer cell growth. The treatment was well tolerated. In the lungs, minor changes were found in the form of focal-diffuse infiltration of the lung parenchyma.
- Open Access
- 23 June 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (13) , 2166
Light-to-Heat Converting ECM-Mimetic Nanofiber Scaffolds for Neuronal Differentiation and Neurite Outgrowth Guidance
The topological cues of fibrous scaffolds (in particular extracellular matrix (ECM)-mimetic nanofibers) have already proven to be a powerful tool for influencing neuronal morphology and behavior. Remote photothermal optical treatment provides additional opportunities for neuronal activity regulation. A combination of these approaches can provide “smart” 3D scaffolds for efficient axon guidance and neurite growth. In this study we propose two alternative approaches for obtaining biocompatible photothermal scaffolds: surface coating of nylon nanofibers with light-to-heat converting nanoparticles and nanoparticle incorporation inside the fibers. We have determined photoconversion efficiency of fibrous nanomaterials under near infrared (NIR) irradiation, as well as biocompatible photothermal treatment parameters. We also measured photo-induced intracellular heating upon contact of cells with a plasmonic surface. In the absence of NIR stimulation, our fibrous scaffolds with a fiber diameter of 100 nm induced an increase in the proportion of β3-tubulin positive cells, while thermal stimulation of neuroblastoma cells on nanoparticles-decorated scaffolds enhanced neurite outgrowth and promoted neuronal maturation. We demonstrate that contact guidance decorated fibers can stimulate directional growth of processes of differentiated neural cells. We studied the impact of nanoparticles on the surface of ECM-mimetic scaffolds on neurite elongation and axonal branching of rat hippocampal neurons, both as topographic cues and as local heat sources. We show that decorating the surface of nanofibers with nanoparticles does not affect the orientation of neurites, but leads to strong branching, an increase in the number of neurites per cell, and neurite elongation, which is independent of NIR stimulation. The effect of photothermal stimulation is most pronounced when cultivating neurons on nanofibers with incorporated nanoparticles, as compared to nanoparticle-coated fibers. The resulting light-to-heat converting 3D materials can be used as tools for controlled photothermal neuromodulation and as “smart” materials for reconstructive neurosurgery.
- 23 June 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (13) , 2166
Open AccessLight-to-Heat Converting ECM-Mimetic Nanofiber Scaffolds for Neuronal Differentiation and Neurite Outgrowth Guidance
The topological cues of fibrous scaffolds (in particular extracellular matrix (ECM)-mimetic nanofibers) have already proven to be a powerful tool for influencing neuronal morphology and behavior. Remote photothermal optical treatment provides additional opportunities for neuronal activity regulation. A combination of these approaches can provide “smart” 3D scaffolds for efficient axon guidance and neurite growth. In this study we propose two alternative approaches for obtaining biocompatible photothermal scaffolds: surface coating of nylon nanofibers with light-to-heat converting nanoparticles and nanoparticle incorporation inside the fibers. We have determined photoconversion efficiency of fibrous nanomaterials under near infrared (NIR) irradiation, as well as biocompatible photothermal treatment parameters. We also measured photo-induced intracellular heating upon contact of cells with a plasmonic surface. In the absence of NIR stimulation, our fibrous scaffolds with a fiber diameter of 100 nm induced an increase in the proportion of β3-tubulin positive cells, while thermal stimulation of neuroblastoma cells on nanoparticles-decorated scaffolds enhanced neurite outgrowth and promoted neuronal maturation. We demonstrate that contact guidance decorated fibers can stimulate directional growth of processes of differentiated neural cells. We studied the impact of nanoparticles on the surface of ECM-mimetic scaffolds on neurite elongation and axonal branching of rat hippocampal neurons, both as topographic cues and as local heat sources. We show that decorating the surface of nanofibers with nanoparticles does not affect the orientation of neurites, but leads to strong branching, an increase in the number of neurites per cell, and neurite elongation, which is independent of NIR stimulation. The effect of photothermal stimulation is most pronounced when cultivating neurons on nanofibers with incorporated nanoparticles, as compared to nanoparticle-coated fibers. The resulting light-to-heat converting 3D materials can be used as tools for controlled photothermal neuromodulation and as “smart” materials for reconstructive neurosurgery.
- 18 March 2022
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 38 (12) , 3630-3640
Permeation of Nanoparticles into Pulmonary Surfactant Monolayer: In Situ X-ray Standing Wave Studies
High-resolution X-ray techniques were applied to examine the effects of gold nanoparticles (size <5 nm) on natural pulmonary surfactant and pure DPPC monolayers preliminarily formed on water subphase in a Langmuir trough. Hydrophobic and hydrophilic nanoparticles were delivered from nanoaerosol using electrodeposition method. Grazing incidence diffraction, X-ray reflectivity, and X-ray standing wave measurements allow to monitor the changes in molecular organization of lipid monolayer and to locate the position of gold nanoparticles. X-ray experiments were performed over a period of 9–14 h. The obtained results evidenced that, on a long time scale, the deposition of nanoparticles, even at low doses, can induce pronounced alterations in lipid monolayer. The presented data can help to elucidate the mechanism of pulmonary translocation of inhaled nanoparticles that is of special interest for biomedical investigations of potential risk of nanoaerosols for human health.
- 18 March 2022
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 38 (12) , 3630-3640
Permeation of Nanoparticles into Pulmonary Surfactant Monolayer: In Situ X-ray Standing Wave Studies
High-resolution X-ray techniques were applied to examine the effects of gold nanoparticles (size <5 nm) on natural pulmonary surfactant and pure DPPC monolayers preliminarily formed on water subphase in a Langmuir trough. Hydrophobic and hydrophilic nanoparticles were delivered from nanoaerosol using electrodeposition method. Grazing incidence diffraction, X-ray reflectivity, and X-ray standing wave measurements allow to monitor the changes in molecular organization of lipid monolayer and to locate the position of gold nanoparticles. X-ray experiments were performed over a period of 9–14 h. The obtained results evidenced that, on a long time scale, the deposition of nanoparticles, even at low doses, can induce pronounced alterations in lipid monolayer. The presented data can help to elucidate the mechanism of pulmonary translocation of inhaled nanoparticles that is of special interest for biomedical investigations of potential risk of nanoaerosols for human health.