Mario Adani
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Mario Adani has a total of 202 co-authors. Here are the top co-authors by number of shared publications:
- Mihaela Mircea
ENEA: Italian National Agency for New Technologies, Energy and Sustainable Economic Development, Bologna, 40129, Italy
25 shared publications - Augustin Colette
French National Institute for Industrial Environment and Risk (Ineris), Verneuil-en-Halatte, 60550, France
24 shared publications Andrea Cappelletti
23 shared publicationsMassimo D'ISidoro
19 shared publications- Svetlana Tsyro
Norwegian Meteorological Institute (Met Norway), Oslo, Norway
19 shared publications - Camilla Andersson
Swedish Meteorological and Hydrological Institute, SE-60176 Norrköping, Sweden
17 shared publications
Latest Publications
- Open Access
- 21 October 2025
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 25 (20) , 13245-13278
Technical note: sensitivity of the CAMS regional air quality modelling system to anthropogenic emission temporal variability
An accurate characterization of the temporal distribution in primary emissions is essential for air quality modeling. This study evaluates the impact of replacing the default temporal profiles in the Copernicus Atmosphere Monitoring Service (CAMS) European air quality multi-model ensemble with an updated dataset (CAMS-REG-TEMPO). The sensitivity of 11 regional models and the ensemble to these changes is assessed by comparing modeled and observed monthly, weekly, and diurnal cycles of nitrogen dioxide (NO 2 ), ozone (O 3 ), coarse particulate matter (PM 10 ), and fine particulate matter (PM 2.5 ) across Europe. NO 2 shows the greatest improvement, with weekly cycle correlations increasing up to +0.17 due to better road transport emissions representation. PM 10 correlations improve in winter (up to +0.13 weekly and +0.07 diurnal) due to refined residential wood combustion emissions. PM 2.5 correlations remain largely unchanged, except for diurnal cycles, which improve in winter (+0.18) but slightly degrade in spring and summer (−0.02). O 3 is the least affected, as correlations were already high with default profiles (0.9–0.95). For some species and timescales (e.g., NO 2 diurnal cycles), results vary across models, highlighting the complex interactions between emission timing and atmospheric processes. CAMS-REG-TEMPO has little effect on annual RMSE and bias, aside from slight improvements in high PM 10 concentrations. Overall, the findings support implementing CAMS-REG-TEMPO in the operational CAMS multi-model ensemble.
- 21 October 2025
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 25 (20) , 13245-13278
Open AccessTechnical note: sensitivity of the CAMS regional air quality modelling system to anthropogenic emission temporal variability
An accurate characterization of the temporal distribution in primary emissions is essential for air quality modeling. This study evaluates the impact of replacing the default temporal profiles in the Copernicus Atmosphere Monitoring Service (CAMS) European air quality multi-model ensemble with an updated dataset (CAMS-REG-TEMPO). The sensitivity of 11 regional models and the ensemble to these changes is assessed by comparing modeled and observed monthly, weekly, and diurnal cycles of nitrogen dioxide (NO 2 ), ozone (O 3 ), coarse particulate matter (PM 10 ), and fine particulate matter (PM 2.5 ) across Europe. NO 2 shows the greatest improvement, with weekly cycle correlations increasing up to +0.17 due to better road transport emissions representation. PM 10 correlations improve in winter (up to +0.13 weekly and +0.07 diurnal) due to refined residential wood combustion emissions. PM 2.5 correlations remain largely unchanged, except for diurnal cycles, which improve in winter (+0.18) but slightly degrade in spring and summer (−0.02). O 3 is the least affected, as correlations were already high with default profiles (0.9–0.95). For some species and timescales (e.g., NO 2 diurnal cycles), results vary across models, highlighting the complex interactions between emission timing and atmospheric processes. CAMS-REG-TEMPO has little effect on annual RMSE and bias, aside from slight improvements in high PM 10 concentrations. Overall, the findings support implementing CAMS-REG-TEMPO in the operational CAMS multi-model ensemble.
- Open Access
- 20 May 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-47
Comment on egusphere-2025-1287
An accurate characterization of the temporal distribution in primary emissions is essential for air quality modeling. This study evaluates the impact of replacing the default temporal profiles in the Copernicus Atmosphere Monitoring Service (CAMS) European air quality multi-model ensemble with an updated dataset (CAMS-REG-TEMPO). The sensitivity of 11 regional models and the ensemble to these changes is assessed by comparing modeled and observed monthly, weekly, and diurnal cycles of nitrogen dioxide (NO2), ozone (O3), coarse particulate matter (PM10), and fine particulate matter (PM2.5) across Europe. NO2 shows the greatest improvement, with weekly cycle correlations increasing up to +0.17 due to better road transport emissions representation. PM10 correlations improve in winter (up to +0.13 weekly and +0.07 diurnal) due to refined residential wood combustion emissions. PM2.5 correlations remain largely unchanged, except for diurnal cycles, which improve in winter (+0.18) but slightly degrade in spring and summer (-0.02). O3 is the least affected, as correlations were already high with default profiles (0.9–0.95). For some species and timescales (e.g., NO2 diurnal cycles), results vary across models, highlighting the complex interactions between emission timing and atmospheric processes. CAMS-REG-TEMPO has little effect on annual RMSE and bias, aside from slight improvements in high PM10 concentrations. Overall, the findings support implementing CAMS-REG-TEMPO in the operational CAMS multi-model ensemble.
- 20 May 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-47
Open AccessComment on egusphere-2025-1287
An accurate characterization of the temporal distribution in primary emissions is essential for air quality modeling. This study evaluates the impact of replacing the default temporal profiles in the Copernicus Atmosphere Monitoring Service (CAMS) European air quality multi-model ensemble with an updated dataset (CAMS-REG-TEMPO). The sensitivity of 11 regional models and the ensemble to these changes is assessed by comparing modeled and observed monthly, weekly, and diurnal cycles of nitrogen dioxide (NO2), ozone (O3), coarse particulate matter (PM10), and fine particulate matter (PM2.5) across Europe. NO2 shows the greatest improvement, with weekly cycle correlations increasing up to +0.17 due to better road transport emissions representation. PM10 correlations improve in winter (up to +0.13 weekly and +0.07 diurnal) due to refined residential wood combustion emissions. PM2.5 correlations remain largely unchanged, except for diurnal cycles, which improve in winter (+0.18) but slightly degrade in spring and summer (-0.02). O3 is the least affected, as correlations were already high with default profiles (0.9–0.95). For some species and timescales (e.g., NO2 diurnal cycles), results vary across models, highlighting the complex interactions between emission timing and atmospheric processes. CAMS-REG-TEMPO has little effect on annual RMSE and bias, aside from slight improvements in high PM10 concentrations. Overall, the findings support implementing CAMS-REG-TEMPO in the operational CAMS multi-model ensemble.
- Open Access
- 30 April 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-47
Comment on egusphere-2025-1287
An accurate characterization of the temporal distribution in primary emissions is essential for air quality modeling. This study evaluates the impact of replacing the default temporal profiles in the Copernicus Atmosphere Monitoring Service (CAMS) European air quality multi-model ensemble with an updated dataset (CAMS-REG-TEMPO). The sensitivity of 11 regional models and the ensemble to these changes is assessed by comparing modeled and observed monthly, weekly, and diurnal cycles of nitrogen dioxide (NO2), ozone (O3), coarse particulate matter (PM10), and fine particulate matter (PM2.5) across Europe. NO2 shows the greatest improvement, with weekly cycle correlations increasing up to +0.17 due to better road transport emissions representation. PM10 correlations improve in winter (up to +0.13 weekly and +0.07 diurnal) due to refined residential wood combustion emissions. PM2.5 correlations remain largely unchanged, except for diurnal cycles, which improve in winter (+0.18) but slightly degrade in spring and summer (-0.02). O3 is the least affected, as correlations were already high with default profiles (0.9–0.95). For some species and timescales (e.g., NO2 diurnal cycles), results vary across models, highlighting the complex interactions between emission timing and atmospheric processes. CAMS-REG-TEMPO has little effect on annual RMSE and bias, aside from slight improvements in high PM10 concentrations. Overall, the findings support implementing CAMS-REG-TEMPO in the operational CAMS multi-model ensemble.
- 30 April 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-47
Open AccessComment on egusphere-2025-1287
An accurate characterization of the temporal distribution in primary emissions is essential for air quality modeling. This study evaluates the impact of replacing the default temporal profiles in the Copernicus Atmosphere Monitoring Service (CAMS) European air quality multi-model ensemble with an updated dataset (CAMS-REG-TEMPO). The sensitivity of 11 regional models and the ensemble to these changes is assessed by comparing modeled and observed monthly, weekly, and diurnal cycles of nitrogen dioxide (NO2), ozone (O3), coarse particulate matter (PM10), and fine particulate matter (PM2.5) across Europe. NO2 shows the greatest improvement, with weekly cycle correlations increasing up to +0.17 due to better road transport emissions representation. PM10 correlations improve in winter (up to +0.13 weekly and +0.07 diurnal) due to refined residential wood combustion emissions. PM2.5 correlations remain largely unchanged, except for diurnal cycles, which improve in winter (+0.18) but slightly degrade in spring and summer (-0.02). O3 is the least affected, as correlations were already high with default profiles (0.9–0.95). For some species and timescales (e.g., NO2 diurnal cycles), results vary across models, highlighting the complex interactions between emission timing and atmospheric processes. CAMS-REG-TEMPO has little effect on annual RMSE and bias, aside from slight improvements in high PM10 concentrations. Overall, the findings support implementing CAMS-REG-TEMPO in the operational CAMS multi-model ensemble.
- Open Access
- 11 April 2025
- Published by Copernicus GmbH in EGUsphere
- Vol. 2025, 1-47
Technical note: Sensitivity of the CAMS regional air quality modelling system to anthropogenic emission temporal variability
An accurate characterization of the temporal distribution in primary emissions is essential for air quality modeling. This study evaluates the impact of replacing the default temporal profiles in the Copernicus Atmosphere Monitoring Service (CAMS) European air quality multi-model ensemble with an updated dataset (CAMS-REG-TEMPO). The sensitivity of 11 regional models and the ensemble to these changes is assessed by comparing modeled and observed monthly, weekly, and diurnal cycles of nitrogen dioxide (NO2), ozone (O3), coarse particulate matter (PM10), and fine particulate matter (PM2.5) across Europe. NO2 shows the greatest improvement, with weekly cycle correlations increasing up to +0.17 due to better road transport emissions representation. PM10 correlations improve in winter (up to +0.13 weekly and +0.07 diurnal) due to refined residential wood combustion emissions. PM2.5 correlations remain largely unchanged, except for diurnal cycles, which improve in winter (+0.18) but slightly degrade in spring and summer (-0.02). O3 is the least affected, as correlations were already high with default profiles (0.9–0.95). For some species and timescales (e.g., NO2 diurnal cycles), results vary across models, highlighting the complex interactions between emission timing and atmospheric processes. CAMS-REG-TEMPO has little effect on annual RMSE and bias, aside from slight improvements in high PM10 concentrations. Overall, the findings support implementing CAMS-REG-TEMPO in the operational CAMS multi-model ensemble.
- 11 April 2025
- Published by Copernicus GmbH in EGUsphere
- Vol. 2025, 1-47
Open AccessTechnical note: Sensitivity of the CAMS regional air quality modelling system to anthropogenic emission temporal variability
An accurate characterization of the temporal distribution in primary emissions is essential for air quality modeling. This study evaluates the impact of replacing the default temporal profiles in the Copernicus Atmosphere Monitoring Service (CAMS) European air quality multi-model ensemble with an updated dataset (CAMS-REG-TEMPO). The sensitivity of 11 regional models and the ensemble to these changes is assessed by comparing modeled and observed monthly, weekly, and diurnal cycles of nitrogen dioxide (NO2), ozone (O3), coarse particulate matter (PM10), and fine particulate matter (PM2.5) across Europe. NO2 shows the greatest improvement, with weekly cycle correlations increasing up to +0.17 due to better road transport emissions representation. PM10 correlations improve in winter (up to +0.13 weekly and +0.07 diurnal) due to refined residential wood combustion emissions. PM2.5 correlations remain largely unchanged, except for diurnal cycles, which improve in winter (+0.18) but slightly degrade in spring and summer (-0.02). O3 is the least affected, as correlations were already high with default profiles (0.9–0.95). For some species and timescales (e.g., NO2 diurnal cycles), results vary across models, highlighting the complex interactions between emission timing and atmospheric processes. CAMS-REG-TEMPO has little effect on annual RMSE and bias, aside from slight improvements in high PM10 concentrations. Overall, the findings support implementing CAMS-REG-TEMPO in the operational CAMS multi-model ensemble.
- Open Access
- 15 March 2025
- Published by Copernicus GmbH
Assimilation of SO2, CO, HCHO and O3 satellite data with Optimal Interpolation implemented in Atmospheric Modelling System MINNI
SO2, CO, HCHO, NO2 and O3 satellite data measured by the TROPOspheric Monitoring Instrument (TROPOMI) instrument on board the Copernicus Sentinel-5 Precursor satellite launched in October 2017 provides a comprehensive atmospheric composition dataset at high horizontal resolution (5.5 km -7 km). Here, we used total column SO2, CO, HCHO and tropospheric O3 L2 products for testing Optimal Interpolation (OI) algorithm implemented in the atmospheric modelling system MINNI. The three-dimensional hourly concentrations fields produced with the chemical transport model FARM at European scale were adjusted with satellite retrievals of pollutants simultaneous and, separately, for O3. The three-dimensional optimal interpolation (OI) scheme developed for satellite data assimilation consider the spatial and temporal error structures of the background field through the background error covariance matrix (B). This matrix was estimated in the same way for all five pollutants and, for simplicity, was assumed diagonal considering thus that the retrievals at different points do not influence each other. Besides, model data were corrected only where the observations were available.This simple OI scheme is computationally feasible but not effective in the same way for all pollutants. There are also differences in assimilating a single species or all together for those formed in the atmosphere such as O3. The differences in the three-dimensional modelled concentrations without and with assimilation for all pollutants and single species are discussed as well as their performances in comparison with ground observations for evaluating the impact of assimilation.To understand the limitations of the implemented OI algorithm, several experiments were run to investigate the effects of using different definitions of B in different states of atmospheric composition. The comparisons and quantitative evaluations were performed both horizontally and vertically, analysing 2D fields and point time series.The preliminary results show that the assimilation can improve modelled NO2 and capture SO2 volcano eruptions which are not present in anthropogenic emission inventories. However, the assimilation of the short-lived species like NO2, HCHO and O3 poses many problems, in particular due to their interdependencies, therefore more research is needed.
- 15 March 2025
- Published by Copernicus GmbH
Open AccessAssimilation of SO2, CO, HCHO and O3 satellite data with Optimal Interpolation implemented in Atmospheric Modelling System MINNI
SO2, CO, HCHO, NO2 and O3 satellite data measured by the TROPOspheric Monitoring Instrument (TROPOMI) instrument on board the Copernicus Sentinel-5 Precursor satellite launched in October 2017 provides a comprehensive atmospheric composition dataset at high horizontal resolution (5.5 km -7 km). Here, we used total column SO2, CO, HCHO and tropospheric O3 L2 products for testing Optimal Interpolation (OI) algorithm implemented in the atmospheric modelling system MINNI. The three-dimensional hourly concentrations fields produced with the chemical transport model FARM at European scale were adjusted with satellite retrievals of pollutants simultaneous and, separately, for O3. The three-dimensional optimal interpolation (OI) scheme developed for satellite data assimilation consider the spatial and temporal error structures of the background field through the background error covariance matrix (B). This matrix was estimated in the same way for all five pollutants and, for simplicity, was assumed diagonal considering thus that the retrievals at different points do not influence each other. Besides, model data were corrected only where the observations were available.This simple OI scheme is computationally feasible but not effective in the same way for all pollutants. There are also differences in assimilating a single species or all together for those formed in the atmosphere such as O3. The differences in the three-dimensional modelled concentrations without and with assimilation for all pollutants and single species are discussed as well as their performances in comparison with ground observations for evaluating the impact of assimilation.To understand the limitations of the implemented OI algorithm, several experiments were run to investigate the effects of using different definitions of B in different states of atmospheric composition. The comparisons and quantitative evaluations were performed both horizontally and vertically, analysing 2D fields and point time series.The preliminary results show that the assimilation can improve modelled NO2 and capture SO2 volcano eruptions which are not present in anthropogenic emission inventories. However, the assimilation of the short-lived species like NO2, HCHO and O3 poses many problems, in particular due to their interdependencies, therefore more research is needed.
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
Vegetation role in urban atmospheric dynamics and chemistry: comprehensive assessment in two Italian cities
Cities and towns have become the primary human living space as they offer many opportunities for people, such as employment, educational opportunities, medical assistance, cultural and recreational activities. According to the United Nations studies, the level of urbanization is expected to increase all over the world. Planning a sustainable rapid urbanisation becomes therefore crucial, and it requires scientific based evidence also regarding the effects of vegetation on urban atmosphere considering the urban built structure and all emission sources. This information is also important for urban regeneration making use of nature-based solutions (NBS) and aiming at improving air quality and reducing the impact of climate changes.It is largely recognised that vegetation contributes to reduce the air temperature and to remove air pollutants in cities, but the impact of its emissions on air quality, together with its effects on the dispersion capacity of the atmosphere, are less known. Biogenic volatile organic compounds (BVOC) that vary with specie and with meteorological conditions, are continuously emitted by vegetation in the atmosphere contributing to the generation, destruction, and transformation of atmospheric pollutants such as gases (O3 and its precursors) and aerosol particles (PM10).Here, a comprehensive assessment of vegetation effects on urban atmosphere will be shown for two Italian cities, Bologna and Milan, using the approach proposed in the European project Life VEG-GAP (https://www.lifeveggap.eu/). Specifically, the role of vegetation on urban meteorology is investigated, followed by an evaluation of its impact on air quality. Thus, the direct effects of vegetation on pollution through removal and emission processes are distinctly evaluated from its “indirect” effect acting through meteorology.The assessments are based on numerical simulations carried out with a state-of-the-art air quality modelling system that uses the chemical transport model FARM and the meteorological model WRF. The BVOC emissions were produced with the species-specific model PSEM and the urban trees inventories provided by the Municipalities.The outcomes show: 1) the contribution of vegetation ecosystems both as a source and a sink of air pollution in urban areas; 2) the urban vegetation ecosystems' effects on air temperature (urban heating and cooling patterns) and 3) its impact on air quality for the most relevant pollutants (O3, NO2, PM10). They also show the relationship between the presence of vegetation and temperature, pollutants’ concentrations, and depositions, according to land-use classes and vegetation fraction.The intercomparison of vegetation effects on urban atmosphere for Bologna and Milan shows that their magnitude, pattern, and space/time variability are city dependent for both meteorological and chemical quantities. In addition, the continuous changes of large-scale meteorological conditions lead to a high variability in the ecosystem services of vegetation that can be realistically assessed only using a VEG-GAP-like approach and cannot be resumed in a simple quantification at city-scale.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessVegetation role in urban atmospheric dynamics and chemistry: comprehensive assessment in two Italian cities
Cities and towns have become the primary human living space as they offer many opportunities for people, such as employment, educational opportunities, medical assistance, cultural and recreational activities. According to the United Nations studies, the level of urbanization is expected to increase all over the world. Planning a sustainable rapid urbanisation becomes therefore crucial, and it requires scientific based evidence also regarding the effects of vegetation on urban atmosphere considering the urban built structure and all emission sources. This information is also important for urban regeneration making use of nature-based solutions (NBS) and aiming at improving air quality and reducing the impact of climate changes.It is largely recognised that vegetation contributes to reduce the air temperature and to remove air pollutants in cities, but the impact of its emissions on air quality, together with its effects on the dispersion capacity of the atmosphere, are less known. Biogenic volatile organic compounds (BVOC) that vary with specie and with meteorological conditions, are continuously emitted by vegetation in the atmosphere contributing to the generation, destruction, and transformation of atmospheric pollutants such as gases (O3 and its precursors) and aerosol particles (PM10).Here, a comprehensive assessment of vegetation effects on urban atmosphere will be shown for two Italian cities, Bologna and Milan, using the approach proposed in the European project Life VEG-GAP (https://www.lifeveggap.eu/). Specifically, the role of vegetation on urban meteorology is investigated, followed by an evaluation of its impact on air quality. Thus, the direct effects of vegetation on pollution through removal and emission processes are distinctly evaluated from its “indirect” effect acting through meteorology.The assessments are based on numerical simulations carried out with a state-of-the-art air quality modelling system that uses the chemical transport model FARM and the meteorological model WRF. The BVOC emissions were produced with the species-specific model PSEM and the urban trees inventories provided by the Municipalities.The outcomes show: 1) the contribution of vegetation ecosystems both as a source and a sink of air pollution in urban areas; 2) the urban vegetation ecosystems' effects on air temperature (urban heating and cooling patterns) and 3) its impact on air quality for the most relevant pollutants (O3, NO2, PM10). They also show the relationship between the presence of vegetation and temperature, pollutants’ concentrations, and depositions, according to land-use classes and vegetation fraction.The intercomparison of vegetation effects on urban atmosphere for Bologna and Milan shows that their magnitude, pattern, and space/time variability are city dependent for both meteorological and chemical quantities. In addition, the continuous changes of large-scale meteorological conditions lead to a high variability in the ecosystem services of vegetation that can be realistically assessed only using a VEG-GAP-like approach and cannot be resumed in a simple quantification at city-scale.
- Open Access
- 27 October 2023
- Published by Copernicus GmbH in Geoscientific Model Development
- Vol. 16 (20) , 6029-6047
A standardized methodology for the validation of air quality forecast applications (F-MQO): lessons learnt from its application across Europe
A standardized methodology for the validation of short-term air quality forecast applications was developed in the framework of the Forum for Air quality Modeling (FAIRMODE) activities. The proposed approach, focusing on specific features to be checked when evaluating a forecasting application, investigates the model's capability to detect sudden changes in pollutant concentration levels, predict threshold exceedances and reproduce air quality indices. The proposed formulation relies on the definition of specific forecast modelling quality objectives and performance criteria, defining the minimum level of quality to be achieved by a forecasting application when it is used for policy purposes. The persistence model, which uses the most recent observed value as the predicted value, is used as a benchmark for the forecast evaluation. The validation protocol has been applied to several forecasting applications across Europe, using different modelling paradigms and covering a range of geographical contexts and spatial scales. The method is successful, with room for improvement, in highlighting shortcomings and strengths of forecasting applications. This provides a useful basis for using short-term air quality forecasts as a supporting tool for providing correct information to citizens and regulators.
- 27 October 2023
- Published by Copernicus GmbH in Geoscientific Model Development
- Vol. 16 (20) , 6029-6047
Open AccessA standardized methodology for the validation of air quality forecast applications (F-MQO): lessons learnt from its application across Europe
A standardized methodology for the validation of short-term air quality forecast applications was developed in the framework of the Forum for Air quality Modeling (FAIRMODE) activities. The proposed approach, focusing on specific features to be checked when evaluating a forecasting application, investigates the model's capability to detect sudden changes in pollutant concentration levels, predict threshold exceedances and reproduce air quality indices. The proposed formulation relies on the definition of specific forecast modelling quality objectives and performance criteria, defining the minimum level of quality to be achieved by a forecasting application when it is used for policy purposes. The persistence model, which uses the most recent observed value as the predicted value, is used as a benchmark for the forecast evaluation. The validation protocol has been applied to several forecasting applications across Europe, using different modelling paradigms and covering a range of geographical contexts and spatial scales. The method is successful, with room for improvement, in highlighting shortcomings and strengths of forecasting applications. This provides a useful basis for using short-term air quality forecasts as a supporting tool for providing correct information to citizens and regulators.
- Open Access
The Role of Vegetation on Urban Atmosphere of Three European Cities. Part 2: Evaluation of Vegetation Impact on Air Pollutant Concentrations and Depositions
This is the first study that quantifies explicitly the impact of present vegetation on concentrations and depositions, considering simultaneously its effects on meteorology, biogenic emissions, dispersion, and dry deposition in three European cities: Bologna, Milan, and Madrid. The behaviour of three pollutants (O3, NO2, and PM10) was investigated considering two different scenarios, with the actual vegetation (VEG) and without it (NOVEG) for two months, representative of summer and winter seasons: July and January. The evaluation is based on simulations performed with two state-of-the-art atmospheric modelling systems (AMS) that use similar but not identical descriptions of physical and chemical atmospheric processes: AMS-MINNI for the two Italian cities and WRF-CMAQ for the Spanish city. The choice of using two AMS and applying one of them in two cities has been made to ensure the robustness of the results needed for their further generalization. The analysis of the spatial distribution of the vegetation effects on air concentrations and depositions shows that they are highly variable from one grid cell to another in the city area, with positive/negative effects or high/low effects in adjacent cells being observed for the three pollutants investigated in all cities. According to the pollutant, on a monthly basis, the highest differences in concentrations (VEG-NOVEG) produced by vegetation were estimated in July for O3 (−7.40 μg/m3 in Madrid and +2.67 μg/m3 in Milan) and NO2 (−3.01 μg/m3 in Milan and +7.17 μg/m3 in Madrid) and in January for PM10 (−3.14 μg/m3 in Milan +2.01 μg/m3 in Madrid). Thus, in some parts of the cities, the presence of vegetation had produced an increase in pollutant concentrations despite its efficient removal action that ranges from ca. 17% for O3 in Bologna (January) to ca. 77% for NO2 in Madrid (July).
Open AccessThe Role of Vegetation on Urban Atmosphere of Three European Cities. Part 2: Evaluation of Vegetation Impact on Air Pollutant Concentrations and Depositions
This is the first study that quantifies explicitly the impact of present vegetation on concentrations and depositions, considering simultaneously its effects on meteorology, biogenic emissions, dispersion, and dry deposition in three European cities: Bologna, Milan, and Madrid. The behaviour of three pollutants (O3, NO2, and PM10) was investigated considering two different scenarios, with the actual vegetation (VEG) and without it (NOVEG) for two months, representative of summer and winter seasons: July and January. The evaluation is based on simulations performed with two state-of-the-art atmospheric modelling systems (AMS) that use similar but not identical descriptions of physical and chemical atmospheric processes: AMS-MINNI for the two Italian cities and WRF-CMAQ for the Spanish city. The choice of using two AMS and applying one of them in two cities has been made to ensure the robustness of the results needed for their further generalization. The analysis of the spatial distribution of the vegetation effects on air concentrations and depositions shows that they are highly variable from one grid cell to another in the city area, with positive/negative effects or high/low effects in adjacent cells being observed for the three pollutants investigated in all cities. According to the pollutant, on a monthly basis, the highest differences in concentrations (VEG-NOVEG) produced by vegetation were estimated in July for O3 (−7.40 μg/m3 in Madrid and +2.67 μg/m3 in Milan) and NO2 (−3.01 μg/m3 in Milan and +7.17 μg/m3 in Madrid) and in January for PM10 (−3.14 μg/m3 in Milan +2.01 μg/m3 in Madrid). Thus, in some parts of the cities, the presence of vegetation had produced an increase in pollutant concentrations despite its efficient removal action that ranges from ca. 17% for O3 in Bologna (January) to ca. 77% for NO2 in Madrid (July).
- Open Access
The Role of Vegetation on Urban Atmosphere of Three European Cities—Part 1: Evaluation of Vegetation Impact on Meteorological Conditions
This study quantifies the vegetation impact on urban meteorology by means of the numerical model WRF (Weather Research and Forecasting model). The assessment was made for two months: July and January. These were considered as representative for the summer and winter seasons, for the reference year 2015 in three European cities: Bologna, Milano, and Madrid. Two simulations at 1 km resolution were conducted over the cities with and without the actual urban vegetation, called VEG and NOVEG, respectively, in the model input. Then, the impact of vegetation was evaluated as the difference between the two simulations (VEG-NOVEG) for temperature, relative humidity, and wind speed fields. In general, we found that, as can be expected, urban vegetation tends to cool the atmosphere, enhance the humidity, and reduce the wind speed. However, in some cases, areas with the opposite behaviour exist, so that no a priori results can be attributed to the presence of urban vegetation. Moreover, even when major impact is confined around grid cells where urban vegetation is present, changes in meteorological quantities can be observed elsewhere in the city’s area. The magnitude of urban vegetation impact is higher in summer than in winter and it depends on the city’s morphological peculiarities, such as urban texture and vegetation types and distribution: average July temperature variations due to the presence of urban vegetation reach peaks of −0.8 °C in Milano, −0.6 °C Madrid, and −0.4 °C in Bologna, while in January, the values range between −0.3 and −0.1 °C. An average heating effect of ca. +0.2 °C is found in some parts of Madrid in January. For relative humidity, we found increments of 2%–3% in July and 0.5%–0.8% in January, while a decrease in wind speed was found between 0.1 and 0.5 m/s, with the highest occurring in Madrid during July.
Open AccessThe Role of Vegetation on Urban Atmosphere of Three European Cities—Part 1: Evaluation of Vegetation Impact on Meteorological Conditions
This study quantifies the vegetation impact on urban meteorology by means of the numerical model WRF (Weather Research and Forecasting model). The assessment was made for two months: July and January. These were considered as representative for the summer and winter seasons, for the reference year 2015 in three European cities: Bologna, Milano, and Madrid. Two simulations at 1 km resolution were conducted over the cities with and without the actual urban vegetation, called VEG and NOVEG, respectively, in the model input. Then, the impact of vegetation was evaluated as the difference between the two simulations (VEG-NOVEG) for temperature, relative humidity, and wind speed fields. In general, we found that, as can be expected, urban vegetation tends to cool the atmosphere, enhance the humidity, and reduce the wind speed. However, in some cases, areas with the opposite behaviour exist, so that no a priori results can be attributed to the presence of urban vegetation. Moreover, even when major impact is confined around grid cells where urban vegetation is present, changes in meteorological quantities can be observed elsewhere in the city’s area. The magnitude of urban vegetation impact is higher in summer than in winter and it depends on the city’s morphological peculiarities, such as urban texture and vegetation types and distribution: average July temperature variations due to the presence of urban vegetation reach peaks of −0.8 °C in Milano, −0.6 °C Madrid, and −0.4 °C in Bologna, while in January, the values range between −0.3 and −0.1 °C. An average heating effect of ca. +0.2 °C is found in some parts of Madrid in January. For relative humidity, we found increments of 2%–3% in July and 0.5%–0.8% in January, while a decrease in wind speed was found between 0.1 and 0.5 m/s, with the highest occurring in Madrid during July.