Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Anica Hursa Šajatović has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Using the Methods-Time Measurement Calculator to Determine the Time Norms for Technological Sewing Operations in the Clothing Industry

    by Snježana Kirin, Damir Kralj, Anica Hursa Šajatović

    The work in the technological sewing process is carried out on machine systems characterised by machine–hand work, where the worker and the machine work simultaneously. Such a work system requires a high level of responsibility in terms of quality, quantity, and the correct and timely execution of work, which requires workers to have fast and accurate reflexes, as well as exceptionally good psychomotor and visual skills. By applying the basic movements of the Methods-Time Measurement (MTM) system, the elaborated standard sets of hand sub-operations included in technological sewing operations, and the method of determining normal times for straight seams (RAV) and curved seams (ZAK), it is possible to determine the working method and time norm of individual technological sewing operations. The MTM Calculator software was developed to facilitate the determination of working methods and time norms on the basis of the MTM system. It can be used to quickly calculate the production time for a technological sewing operation.


  • Open Access

    Use of MTM, RAV and ZAK Methods in Determining Working Methods and Time Norms in Technological Operations of Sewing Clothes

    by Snježana Kirin, Anica Hursa Šajatović, Snježana Firšt Rogale

    The paper presents the application of MTM, RAV and ZAK methods in the determination of working methods and time norms for the technological process of sewing. The technological operation of sewing the back sleeve seam on a men’s jacket is used for the study. The paper presents the designed workplace in a real production process. In addition, the appropriate working method and the time norm are determined using the MTM (Method Time Measurement), RAV (determination of sewing time for straight seams) and ZAK (determination of sewing time for curved seams) methods. The aim of the study was to combine the methods for determining different types of time (manual, machine-hand and machine) for performing technological operations and precisely calculate the time norms. For the described methods of determining the production time, computer programs were developed that speed up the calculation of the time norm. If the working method is defined in advance and the characteristics of the sewing machine are known, the time norm for each technological operation can be determined in advance. Based on these calculations, it is possible to determine the total time for the production of clothing in advance and thus to plan and schedule the production process and plan the delivery dates to customers. The results show that the technical equipment of the sewing machine and the working method have an influence on the structure of the technological sewing process. By choosing an appropriate working method, the workload and fatigue of the workers is reduced, as an appropriate number of auxiliary hand sub-operations are used. In this way, the appropriate time required to perform the technological operation is achieved.


  • Open Access

    Durability of Shield Effective Polyester Cotton Fabric with Integrated Stainless Steel Threads in Processes of Dry and Wet Cleaning

    by Tanja Pušić, Bosiljka Šaravanja, Anica Hursa Šajatović, Krešimir Malarić

    Protective properties against electromagnetic radiation represent the essential value of textiles for protective clothing worn in hazardous working conditions. To ensure that protective clothing lasts for as long as feasible, care processes must be optimized, especially since protective clothing is subjected to repeated cycles due to soiling. Improved formulations of special detergents and agents with high-performance finishing agents used in care processes can contribute to a longer life of protective clothing. In this paper, the shield effectiveness of a cotton polyester fabric with integrated metal threads in the warp and weft directions at frequencies of 0.9 GHz, 1.8 GHz, 2.1 GHz, and 2.4 GHz is compared to that of its environmentally friendly alternative, wet cleaning processes. The research is carried out by varying process parameters: mechanics, chemical action, and cycle number. The results proved the drop of shield properties of polyester/cotton fabric with integrated stainless steel threads depending on frequencies and the number of professional cleaning cycles. The worst shield effectiveness of the tested fabric was obtained after 10 cycles of dry cleaning, wherein the degree of protection at frequency 2.4 GHz is reduced by 6.89 dB. According to the obtained results, the level of functional properties was better preserved in the wet cleaning process, which additionally has better ecological premises compared to dry cleaning process.


  • Open Access

    Investigation of Flammability of Protective Clothing System for Firefighters

    by Anica Hursa Šajatović, Sandra Flinčec Grgac, Daniela Zavec

    The main characteristic of clothing for protection against heat and flame is the protection of users from external influences and danger in the conditions of elevated temperatures and exposure to flame, fire, smoke, and water. The paper presents research on the clothing system for protection against heat and flame using a fire manikin and systematically analyses the damage caused after testing. As part of the damage analysis, the existence of microdamage and impurities on the clothing system was determined using a USB Dino-Lite microscope. In addition, the intensities and composition of gaseous decomposition products during the thermogravimetric analysis of samples were investigated. The results of the research using a fire manikin showed that the user of the examined clothing system would not have sustained injuries dangerous to health and life, which confirmed the protective properties. The results of the TG-FTIR indicate that the decomposition of the fabric sample of the modacrylic–cotton fiber mixture takes place in three stages, and the identified gaseous degradation products were H2O, CO2, and CO.


  • Numerical simulation of textile flexibility testing

    by Željko Šomodi, Anica Hursa, Dubravko Rogale

    A non‐linear numerical simulation of a standard procedure for textile flexibility testing is performed using discretised beam bending model. Geometric non‐linearity due to large deflections is traced using incremental method. Linear moment‐curvature response is assumed, as well as constant curvature of a finite element of the beam. Numerical procedure is incorporated into a PC programme producing graphical results for the deformed shape of the specimen, non‐linear load‐deflection diagrams and internal force distributions in deformed state. Finally, the method is applied to compute the flexural stiffness of textile materials from the data produced by the standard procedure for flexibility testing.