Thuany Costa de Lima
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Thuany Costa de Lima has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Hrvoje Tkalčić
Research School of Earth Sciences The Australian National University Canberra ACT Australia
6 shared publications - Thanh-Son Pham
Research School of Earth Sciences The Australian National University Canberra ACT Australia
4 shared publications - Caroline M. Eakin
Research School of Earth Sciences, Australian National University, Canberra, Australia
2 shared publications - Millard Filmore Coffin
Institute for Marine and Antarctic Studies, University of Tasmania, Hobart, Australia
2 shared publications - Nicholas Rawlinson
Bullard Laboratories Department of Earth Sciences University of Cambridge Cambridge UK
2 shared publications - Sheng Wang
Research School of Earth Sciences The Australian National University Canberra ACT Australia
2 shared publications
Latest Publications
- 26 January 2026
- Published by Seismological Society of America (SSA) in Seismological Research Letters
- Vol. 97 (4) , 2599-2615
The Central Macquarie Ridge Complex in 3D from Adjoint Waveform Tomography Using Ambient Seismic Noise
The Macquarie Ridge Complex (MRC), located at the boundary between the Australian, Macquarie, and Pacific plates south of New Zealand, is currently recognized as a dominantly transform plate boundary that evolved from a mid-ocean spreading ridge. We deployed five land stations and 27 ocean-bottom seismometers (OBSs) on and around Macquarie Island from 2020 to 2021 along the MRC in the Southern Ocean. From the waveforms recorded on successfully recovered OBSs and island stations, including permanent station MCQ, we generated a 3D S-wave velocity model of the crust and uppermost mantle using an adjoint waveform tomography method after five iterations based on surface waves (5–20 s) extracted from ambient seismic noise. The initial 3D model is constructed using real bathymetry, a water layer, and an optimal 1D model. During the inversion, we use the spectral element method to perform forward and adjoint seismic wavefield simulations with Specfem3D_Cartesian. The shortest resolvable period is about 1.35 s. The new S-wave velocity model reveals a pronounced increase in velocity across expected crustal and uppermost mantle depths between 7 and 12 km. Relatively high S-wave velocities (>3.8 km/s) in the uppermost lithosphere are consistent with the presence of upper mantle rocks at relatively shallow depths distributed along the ridge. Widespread high-velocity material may indicate that the uppermost lithosphere is not substantially deformed during obduction.
- 26 January 2026
- Published by Seismological Society of America (SSA) in Seismological Research Letters
- Vol. 97 (4) , 2599-2615
The Central Macquarie Ridge Complex in 3D from Adjoint Waveform Tomography Using Ambient Seismic Noise
The Macquarie Ridge Complex (MRC), located at the boundary between the Australian, Macquarie, and Pacific plates south of New Zealand, is currently recognized as a dominantly transform plate boundary that evolved from a mid-ocean spreading ridge. We deployed five land stations and 27 ocean-bottom seismometers (OBSs) on and around Macquarie Island from 2020 to 2021 along the MRC in the Southern Ocean. From the waveforms recorded on successfully recovered OBSs and island stations, including permanent station MCQ, we generated a 3D S-wave velocity model of the crust and uppermost mantle using an adjoint waveform tomography method after five iterations based on surface waves (5–20 s) extracted from ambient seismic noise. The initial 3D model is constructed using real bathymetry, a water layer, and an optimal 1D model. During the inversion, we use the spectral element method to perform forward and adjoint seismic wavefield simulations with Specfem3D_Cartesian. The shortest resolvable period is about 1.35 s. The new S-wave velocity model reveals a pronounced increase in velocity across expected crustal and uppermost mantle depths between 7 and 12 km. Relatively high S-wave velocities (>3.8 km/s) in the uppermost lithosphere are consistent with the presence of upper mantle rocks at relatively shallow depths distributed along the ridge. Widespread high-velocity material may indicate that the uppermost lithosphere is not substantially deformed during obduction.
- Open Access
- 14 June 2024
- Published by Wiley
The Central Macquarie Ridge Complex in 3D From Full-waveform Ambient Noise Tomography
We deployed 27 ocean-bottom seismometers (OBSs) and five Macquarie Island stations between 2020 and 2021 along the Australian-Pacific plate boundary in the Macquarie Ridge Complex (MRC) of the Southern Ocean. From the waveforms recorded on successfully recovered OBSs and the island stations, including permanent station MCQ, we generated a 3-D S-wave velocity model for the crust and uppermost mantle using full-waveform ambient noise tomography. Distinct surface waves are identified via inter-station cross-correlation of the vertical components. The new S-wave velocity model reveals a pronounced increase in velocity across expected crustal and uppermost mantle depths. Relatively high S-wave velocities (>3.8 km/s at 7 km below sea level) are consistent with the presence of upper mantle rocks at relatively shallow depths spread out along the ridge. Overall, our findings provide initial insights on the sub-surface structure of the MRC, a complex tectonic setting of potential subduction initiation.
- 14 June 2024
- Published by Wiley
Open AccessThe Central Macquarie Ridge Complex in 3D From Full-waveform Ambient Noise Tomography
We deployed 27 ocean-bottom seismometers (OBSs) and five Macquarie Island stations between 2020 and 2021 along the Australian-Pacific plate boundary in the Macquarie Ridge Complex (MRC) of the Southern Ocean. From the waveforms recorded on successfully recovered OBSs and the island stations, including permanent station MCQ, we generated a 3-D S-wave velocity model for the crust and uppermost mantle using full-waveform ambient noise tomography. Distinct surface waves are identified via inter-station cross-correlation of the vertical components. The new S-wave velocity model reveals a pronounced increase in velocity across expected crustal and uppermost mantle depths. Relatively high S-wave velocities (>3.8 km/s at 7 km below sea level) are consistent with the presence of upper mantle rocks at relatively shallow depths spread out along the ridge. Overall, our findings provide initial insights on the sub-surface structure of the MRC, a complex tectonic setting of potential subduction initiation.
- Open Access
- 29 July 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-10
An estimate of absolute shear-wave speed in the Earth’s inner core
Observations of seismic body waves that traverse the Earth’s inner core (IC) as shear (J) waves are critical for understanding the IC shear properties, advancing our knowledge of the Earth’s internal structure and evolution. Here, we present several seismological observations of J phases detected in the earthquake late-coda correlation wavefield at periods of 15–50 s, notably via the correlation feature I-J, found to be independent of the Earth reference velocity model. Because I-J is unaffected by compressional wave speeds of the Earth’s inner core, outer core, and mantle, it represents an autonomous class of seismological measurements to benchmark the inner core properties. We estimate the absolute shear-wave speed in the IC to be 3.39 ± 0.02 km/s near the top and 3.54 ± 0.02 km/s in the center, lower than recently reported values. This is a 3.4 ± 0.5% reduction from the Preliminary Reference Earth Model (PREM), suggesting a less rigid IC than previously estimated from the normal mode data. Such a low shear-wave speed requires re-evaluating IC composition, including the abundance of light elements, the atomic properties and stable crystallographic phase of iron, and the IC solidification process.
- 29 July 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-10
Open AccessAn estimate of absolute shear-wave speed in the Earth’s inner core
Observations of seismic body waves that traverse the Earth’s inner core (IC) as shear (J) waves are critical for understanding the IC shear properties, advancing our knowledge of the Earth’s internal structure and evolution. Here, we present several seismological observations of J phases detected in the earthquake late-coda correlation wavefield at periods of 15–50 s, notably via the correlation feature I-J, found to be independent of the Earth reference velocity model. Because I-J is unaffected by compressional wave speeds of the Earth’s inner core, outer core, and mantle, it represents an autonomous class of seismological measurements to benchmark the inner core properties. We estimate the absolute shear-wave speed in the IC to be 3.39 ± 0.02 km/s near the top and 3.54 ± 0.02 km/s in the center, lower than recently reported values. This is a 3.4 ± 0.5% reduction from the Preliminary Reference Earth Model (PREM), suggesting a less rigid IC than previously estimated from the normal mode data. Such a low shear-wave speed requires re-evaluating IC composition, including the abundance of light elements, the atomic properties and stable crystallographic phase of iron, and the IC solidification process.
- Open Access
- 15 May 2023
- Published by Copernicus GmbH
New constraints on shear properties of the Earth’s inner core from the global correlation wavefield
Seismological observations of J-phases, the seismic waves traversing the Earth’s inner core (IC) as shear waves, are critical to understanding the inner core shear properties. That, in turn, will shed light on the solidification process and the evolution of the inner core and our planet. Most body-wave detections of the J waves have been controversial due to their small amplitudes, which involve energy conversion from P- to S- and vice versa at the inner core boundary. Recent advances in understanding the nature of the late coda correlation offer a new way to sample the deep Earth, including the shear properties of the Earth’s inner core. The correlation-based features provide the sensitivity of the periods between 15 and 50 s, placing it between the body waves and normal mode data. Therefore, the observations of late coda correlation are vital in refining the shear properties of the IC, such as velocity, anisotropy, and attenuation.This study employs several uninvestigated J-wave correlation features detected in the global coda-correlation wavefield building on the study of Tkalčić and Pham (2018) that determined the shear wave speed reduction of 2.5% relative to PREM. The correlation features observed in the coda-correlation wavefield arise from similar seismic phases in which one contains a shear-wave leg in the IC. Improved data selection process and knowledge acquired from recent theoretical and observational developments in understanding the anatomy of coda correlation wavefield enable significant improvements in the data quality. We benchmark the waveforms of observed correlation features using numerical modeling, confirm the observations of J waves and inner core solidity and update its shear properties’ values, including shear-wave speed and Poisson’s ratio.
- 15 May 2023
- Published by Copernicus GmbH
Open AccessNew constraints on shear properties of the Earth’s inner core from the global correlation wavefield
Seismological observations of J-phases, the seismic waves traversing the Earth’s inner core (IC) as shear waves, are critical to understanding the inner core shear properties. That, in turn, will shed light on the solidification process and the evolution of the inner core and our planet. Most body-wave detections of the J waves have been controversial due to their small amplitudes, which involve energy conversion from P- to S- and vice versa at the inner core boundary. Recent advances in understanding the nature of the late coda correlation offer a new way to sample the deep Earth, including the shear properties of the Earth’s inner core. The correlation-based features provide the sensitivity of the periods between 15 and 50 s, placing it between the body waves and normal mode data. Therefore, the observations of late coda correlation are vital in refining the shear properties of the IC, such as velocity, anisotropy, and attenuation.This study employs several uninvestigated J-wave correlation features detected in the global coda-correlation wavefield building on the study of Tkalčić and Pham (2018) that determined the shear wave speed reduction of 2.5% relative to PREM. The correlation features observed in the coda-correlation wavefield arise from similar seismic phases in which one contains a shear-wave leg in the IC. Improved data selection process and knowledge acquired from recent theoretical and observational developments in understanding the anatomy of coda correlation wavefield enable significant improvements in the data quality. We benchmark the waveforms of observed correlation features using numerical modeling, confirm the observations of J waves and inner core solidity and update its shear properties’ values, including shear-wave speed and Poisson’s ratio.
- Open Access
- 15 May 2023
- Published by Copernicus GmbH
Observations of Regional Seismic Discontinuities in the Earth’s Upper Mantle from SS- and PP- precursors
The physical properties of regional seismic discontinuities in the upper mantle yield insights into lateral and radial thermochemical variations, with implications for our understanding of magmatism and convection in the mantle.The global distribution of the 300-km discontinuity (termed the “X” discontinuity) is relatively poorly resolved, as it is detected infrequently, likely due to its small impedance contrast. Reflectors observed near this depth are usually local and primarily detected beneath continent and subduction zones. Several mechanisms suggest that the X is associated with mineral transformations that occur in basalt-enriched material. Thus, imaging the X-discontinuity holds the key to mapping subducted oceanic crust remnants.Another discontinuity, at around 520 km depth, is detected more frequently and sometimes observed to be split into two signals. Its existence is predicted by the wadsleyite to ringwoodite mineral phase transition. However, the variations in ambient thermochemistry, which influence its visibility, depth variation, reflectivity, and/or splitting, are not fully understood, necessitating further investigations. Improved constraints on the nature of the 520 will inform regarding thermal and compositional gradients within the mantle transition zone.In this study, we use large global datasets of SS and PP precursors to obtain new maps of these discontinuities. Our observations indicate regionally weak yet clear signals at both depths, linked to variations in basalt fraction and potential temperature. We perform mineral physics modeling and investigate the characteristic temperature and composition associated with the signatures of these signals. These results provide insight into our understanding of the chemical segregation and plume stagnation in the upper mantle.
- 15 May 2023
- Published by Copernicus GmbH
Open AccessObservations of Regional Seismic Discontinuities in the Earth’s Upper Mantle from SS- and PP- precursors
The physical properties of regional seismic discontinuities in the upper mantle yield insights into lateral and radial thermochemical variations, with implications for our understanding of magmatism and convection in the mantle.The global distribution of the 300-km discontinuity (termed the “X” discontinuity) is relatively poorly resolved, as it is detected infrequently, likely due to its small impedance contrast. Reflectors observed near this depth are usually local and primarily detected beneath continent and subduction zones. Several mechanisms suggest that the X is associated with mineral transformations that occur in basalt-enriched material. Thus, imaging the X-discontinuity holds the key to mapping subducted oceanic crust remnants.Another discontinuity, at around 520 km depth, is detected more frequently and sometimes observed to be split into two signals. Its existence is predicted by the wadsleyite to ringwoodite mineral phase transition. However, the variations in ambient thermochemistry, which influence its visibility, depth variation, reflectivity, and/or splitting, are not fully understood, necessitating further investigations. Improved constraints on the nature of the 520 will inform regarding thermal and compositional gradients within the mantle transition zone.In this study, we use large global datasets of SS and PP precursors to obtain new maps of these discontinuities. Our observations indicate regionally weak yet clear signals at both depths, linked to variations in basalt fraction and potential temperature. We perform mineral physics modeling and investigate the characteristic temperature and composition associated with the signatures of these signals. These results provide insight into our understanding of the chemical segregation and plume stagnation in the upper mantle.
- Open Access
- 1 April 2022
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 127 (4)
A New Probe Into the Innermost Inner Core Anisotropy via the Global Coda‐Correlation Wavefield
Investigations of the Earth's inner core (IC) using seismic body waves are limited by their volumetric sampling due to uneven global distribution of large earthquakes and receivers. The sparse coverage of the IC leads to uncertainties in its anisotropy, the directional dependence of seismic velocity. Yet, detailed constraints on anisotropy, such as its magnitude, and spatial distribution, are required to understand the crystallographic structure of IC's iron and its solidification and deformation processes. Here, we present a new method to investigate the IC's anisotropic properties based on Earth's coda‐correlation wavefield constructed from the late coda of large earthquakes. We perform a comprehensive travel time analysis of I2*, an IC‐sensitive correlation feature identified as a counterpart of the direct seismic wavefield's PKIKPPKIKP waves, yet fundamentally different. Namely, I2* is a mathematical manifestation of similarity among specific seismic phases with the same slowness detected in global correlograms in the short inter‐receiver distance range. Our new spatial sampling of the IC overcomes the shortage of direct seismic wavefield paths sensitive to the IC's central volume, also known as the innermost IC (IMIC). The observed I2*’s travel time variations relative to Earth's rotation axis (ERA) support a model of cylindrical anisotropy with 3.3% strength and a zonal pattern of slow axis oriented 55° from ERA. We thus find compelling evidence for a deep IC structure with distinct anisotropy, although we cannot resolve the depth at which the change occurs. This finding reinforces previous inference on the IMIC, with implications for Earth's evolution.
- 1 April 2022
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 127 (4)
Open AccessA New Probe Into the Innermost Inner Core Anisotropy via the Global Coda‐Correlation Wavefield
Investigations of the Earth's inner core (IC) using seismic body waves are limited by their volumetric sampling due to uneven global distribution of large earthquakes and receivers. The sparse coverage of the IC leads to uncertainties in its anisotropy, the directional dependence of seismic velocity. Yet, detailed constraints on anisotropy, such as its magnitude, and spatial distribution, are required to understand the crystallographic structure of IC's iron and its solidification and deformation processes. Here, we present a new method to investigate the IC's anisotropic properties based on Earth's coda‐correlation wavefield constructed from the late coda of large earthquakes. We perform a comprehensive travel time analysis of I2*, an IC‐sensitive correlation feature identified as a counterpart of the direct seismic wavefield's PKIKPPKIKP waves, yet fundamentally different. Namely, I2* is a mathematical manifestation of similarity among specific seismic phases with the same slowness detected in global correlograms in the short inter‐receiver distance range. Our new spatial sampling of the IC overcomes the shortage of direct seismic wavefield paths sensitive to the IC's central volume, also known as the innermost IC (IMIC). The observed I2*’s travel time variations relative to Earth's rotation axis (ERA) support a model of cylindrical anisotropy with 3.3% strength and a zonal pattern of slow axis oriented 55° from ERA. We thus find compelling evidence for a deep IC structure with distinct anisotropy, although we cannot resolve the depth at which the change occurs. This finding reinforces previous inference on the IMIC, with implications for Earth's evolution.
- Open Access
- 27 March 2022
- Published by Copernicus GmbH
Evidence for Anisotropy in the Innermost Inner Core from the Earthquake Coda-correlation Wavefield
Progress on seismic imaging of the Earth’s inner core (IC) is fairly limited by the uneven distribution of sources and receivers; large earthquakes are primarily confined to plate margins, and seismic stations are unevenly deployed on the Earth’s surface. Advances in data processing techniques and new methods are required to bridge new opportunities to probe the centre of our planet and provide us with valuable information on the IC seismic structure and its surrounding dynamics. In this study, we present a newly-developed method based on the global earthquake coda-correlation wavefield to investigate the anisotropic structure of the IC. Anisotropy in seismic velocity is the directional dependence of seismic waves. Under IC pressure and temperature conditions, different phases of iron – the core’s main mineral constituent can stabilize and form elastic anisotropy. Thus, improved constraints on its strength and distribution are required to understand the crystallographic structure of iron in the IC, which is linked to the evolution of its solidification and deformation processes. Here, we stack the cross-correlation functions of the late-coda seismic wavefield (the correlation wavefield) that reverberates within the Earth up to 10 hours after large earthquakes. We analyse the travel times of the I2* correlation feature, a mathematical manifestation of similarity among IC seismic phases with the same slowness detected in global correlograms at small interstation distances (<10°). The I2* spatial sampling offers an unprecedented data coverage of the IC’s central portion, also known as the innermost IC (IMIC), which overcomes the shortage of the traditional approach using PKIKP ray paths sampling. By comparing the time residuals of different paths of I2* propagating through the IC, we confirm the presence of a deep IC structure with anisotropy fundamentally different from the IC’s outer layers. Our observations support an IMIC cylindrical anisotropy model with a slow direction oriented 55° from the Earth’s spin axis. This new evidence reinforces previous inferences on the existence of the IMIC, with implications for our understanding of the core’s geodynamical evolution. In the future, a similar approach could be applied to advance our understanding of anisotropy in the Earth’s mantle.
- 27 March 2022
- Published by Copernicus GmbH
Open AccessEvidence for Anisotropy in the Innermost Inner Core from the Earthquake Coda-correlation Wavefield
Progress on seismic imaging of the Earth’s inner core (IC) is fairly limited by the uneven distribution of sources and receivers; large earthquakes are primarily confined to plate margins, and seismic stations are unevenly deployed on the Earth’s surface. Advances in data processing techniques and new methods are required to bridge new opportunities to probe the centre of our planet and provide us with valuable information on the IC seismic structure and its surrounding dynamics. In this study, we present a newly-developed method based on the global earthquake coda-correlation wavefield to investigate the anisotropic structure of the IC. Anisotropy in seismic velocity is the directional dependence of seismic waves. Under IC pressure and temperature conditions, different phases of iron – the core’s main mineral constituent can stabilize and form elastic anisotropy. Thus, improved constraints on its strength and distribution are required to understand the crystallographic structure of iron in the IC, which is linked to the evolution of its solidification and deformation processes. Here, we stack the cross-correlation functions of the late-coda seismic wavefield (the correlation wavefield) that reverberates within the Earth up to 10 hours after large earthquakes. We analyse the travel times of the I2* correlation feature, a mathematical manifestation of similarity among IC seismic phases with the same slowness detected in global correlograms at small interstation distances (<10°). The I2* spatial sampling offers an unprecedented data coverage of the IC’s central portion, also known as the innermost IC (IMIC), which overcomes the shortage of the traditional approach using PKIKP ray paths sampling. By comparing the time residuals of different paths of I2* propagating through the IC, we confirm the presence of a deep IC structure with anisotropy fundamentally different from the IC’s outer layers. Our observations support an IMIC cylindrical anisotropy model with a slow direction oriented 55° from the Earth’s spin axis. This new evidence reinforces previous inferences on the existence of the IMIC, with implications for our understanding of the core’s geodynamical evolution. In the future, a similar approach could be applied to advance our understanding of anisotropy in the Earth’s mantle.