Tao Yu

Underfloor air distribution (UFAD) systems are increasingly used for their advantages in improving energy savings, indoor air quality, and thermal comfort. In UFAD systems, an underfloor plenum delivers conditioned air to the air supply diffusers. The distribution of internal air velocity and static pressure in plenums determines the uniformity of the airflow to the occupied zones. As a result, the plenum has a detrimental effect on the characteristics of the supply air and, thus, the resulting indoor air quality and thermal comfort. Nevertheless, most existing studies on underfloor plenums focused on small-scale plenums with a single internal air duct. Large plenums and multiple air ducts in UFAD equipped in large premises are underexplored. In this study, a circular underfloor plenum with a large scale (radius of 15 m, height difference of 0.9−2.9 m) and 503 under-seat diffusers in a conference room was studied using computational fluid dynamics (CFD) simulation (ANSYS Fluent (16.0)). The distributions of airflow velocity and static pressure inside the plenum were analyzed and compared to one concentrated air supply mode and three uniform air supply modes. Based on the air velocity at the center of under-seat diffusers, the outgoing airflow uniformity from the diffusers under four cases was evaluated by the index of air velocity uniformity. The results showed that the multiple supply ducts with bottom air outlets yielded the best uniformity of supply air. The findings of this paper are expected to provide a technical basis for realizing the optimal design of the UFAD system in terms of uniformity of supply air.

Root temperature is an important ecological factor affecting plant growth. A solar greenhouse with an active solar heating system was built in Jinan, in the cold climate zone of northern China. Experiments encompassing the complete cycle of heat collection, heat storage, and heat release were carried out. Using the experimental data, the numerical simulation of soil heat storage with a variable heat flow was executed using the ANSYS (ANSYS Inc., Pittsburgh, PA, USA) Fluent software. Soil temperature fields were studied on typical sunny days and typical cloudy days in the transition season and winter. The solar collector efficiency and coefficient of performance of the system were investigated. The applicability of this active solar soil heating system with soil heat storage for cold areas was evaluated. The results showed that the system effectively maintained suitable ground temperatures to prevent plant growth inhibition caused by low ground temperatures in winter. During the experimental period, the solar collector efficiency was 47% and the system’s coefficient of performance was 67.70. The thermal performance of the system was much better than a traditional energy system. This study showed that this active solar heating system with soil heat storage is an economic and feasible way to increase soil temperatures in solar greenhouses in cold areas.