CTCharalampos Tsioustas

Charalampos Tsioustas

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Charalampos Tsioustas has a total of 35 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Development of Advanced Nanobiosensors and a Portable Monitoring System for Pesticide Detection at the Point of Need

    by Evangelos Skotadis, Menelaos Tsigkourakos, Emmanouil Anthoulakis, Myrto-Kyriaki Filippidou, Sotirios Ntouskas, Maria Kainourgiaki, Charalampos Tsioustas, Chrysi Panagopoulou, Stergios Dimou-Sakellariou, Nikos Kalatzis, et al.

    This work presents the development of an automated and portable monitoring system for the point-of-need detection of tebuconazole and lambda-cyhalothrin. The system features nanoparticle/aptamer-modified electrochemical sensors that are integrated into a microfluidic chip based on polydimethylsiloxane (PDMS). More specifically, rapid and selective detection of both pesticides is achieved using target-specific aptamers immobilized on two-dimensional platinum nanoparticle films that serve as expanded nano-gapped electrodes to enhance sensor sensitivity. The effect of the device substrate (i.e., silicon versus flexible substrates) and measurement setup on biosensing performance has also been investigated. The final monitoring system is characterized by high sensitivity and selectivity in the cases of both target analytes and substrates. Τhe system features a limit of detection of 9.85 pM for tebuconazole, which is one of the lowest reported values in the literature; for lambda-cyhalothrin, it is worth noting that the results reported herein represent one of the few studies on an electrochemical aptamer-based sensor for this analyte, featuring a limit of detection of 48.5 pM. The system is also capable of selectively detecting both targets for complex cross-reactive sample matrices consisting of commercially available pesticides. Moreover, its use could be expanded to detect additional pollutants by functionalizing the biosensor surface with appropriate aptamers.


  • Highly reliable perovskite-based memristors using Ag nanoparticles/FA2PbI4 junctions for enhanced memory and optoelectronic synaptic performance

    by P. Bousoulas, S. Orfanoudakis, V. Pagonis, C. Tsioustas, D. Spathi, T. Stergiopoulos, D. Tsoukalas

    The hybrid nature of metal halide perovskites endows them with unique optoelectronic properties, which can be leveraged for developing next-generation memory devices with a small energy footprint. However, various challenges related to the stability and performance of these devices impede their practical implementation. To deal with this issue, in this work, an interface optimization technique was applied using a layer of Ag nanoparticles (NPs) that were soft landed onto the active perovskite layer without causing any significant damage. In contrast with the memristive devices having sputtered bulk silver metal contacts, the forming-free ITO/Ag NPs/FA2PbI4/Pt NPs/ITO memristor exhibited robust endurance properties (1011 cycles) accompanied by a big memory window (104) and a relatively low VSET (∼1.8 V). A numerical model was also applied to examine the origins of the switching effect. The transparent nature of both the electrode materials and the film of metal NPs permitted the emulation of synaptic properties using exclusively light sources. The frequency of the optical pulses was used to tune the conductance change, and a low power consumption per synaptic weight of ∼10 pJ was extracted during red light irradiation at 740 nm. Multicolor perception capabilities were also demonstrated using two other light sources in the visible range (450 and 550 nm). Our work provides a simple and effective approach for developing low power memory elements with enhanced performance for future optoelectronic neuromorphic applications.


  • Low power tactile sensory neuron using nanoparticle-based strain sensor and memristor

    by P. Bousoulas, S. D. Mantas, C. Tsioustas, D. Tsoukalas

    Endowing strain sensors with neuromorphic computing capabilities could permit the efficient processing of tactile information on the edge. The realization of such functionalities from a simple circuit without software processing holds promise for attaining skin-based perception. Here, leveraging the intrinsic neuronal plasticity of memristive neurons, various firing patterns induced by the applied strain were demonstrated. More specifically, tonic, bursting, transition from tonic to bursting, adaptive, and nociceptive activities were captured. The implementation of these patterns permits the facile translation of the analog pressure signals into digital spikes, attaining accurate perception of various tactile characteristics. The tactile sensory neuron consisting of an RC circuit was composed of a SiO2-based conductive bridge memristor exhibiting leaky integrate-and-fire properties and a Pt nanoparticles (NPs)-based strain sensor with a gauge factor of ∼270. A dense layer of Pt NPs was also used as the bottom electrode for the memristive element, yielding the manifestation of a threshold switching mode with a switching voltage of only ∼350 mV and an exceptional switching ratio of 107. Our work provides valuable insights for developing low power neurons with tactile feedback for prosthetics and robotics applications.


  • Impact of inert electrode on the volatility and non-volatility switching behavior of SiO2-based conductive bridge random access memory devices

    by C. Tsioustas, P. Bousoulas, G. Kleitsiotis, S. D. Mantas, D. Tsoukalas

    The development of disruptive artificial neural networks (ANNs) endowed with brain-inspired neuromorphic capabilities is emerging as a promising solution to deal with the challenges of the artificial intelligence era. The fabrication of robust and accurate ANNs is strongly associated with the design of new electronic devices. The intriguing properties of memristors render them suitable as building blocks within ANNs. However, the impact of the operating electrodes on the dynamics of the switching process and the relaxation effect remains elusive. It is, thus, apparent that a deep understanding of the underlying electrochemical metallization mechanism that affects the formation of the conductive filament is of great importance. Along these lines, in this work, the impact of various materials as inert electrodes (Pt NPs, ITO, n++ Si, TiN, and W) on tuning the switching mode of low power SiO2-based conductive bridge random access memory devices was systematically investigated. A comprehensive model was applied to interpret the threshold and bipolar switching patterns and shed light on the respective physical mechanisms. The model incorporated the different coefficients of thermal conductivity of the various materials and attempted to associate them with the Soret coefficient and the activation energy of thermophoresis to interpret the experimental outcomes. Our work provides valuable insight for the realization of memristive devices with tunable properties, which can be directly leveraged for implementing a variety of neuromorphic functionalities, such as synaptic plasticity and spike generation.


  • Demonstration of Low Power and Highly Uniform 6-bit Operation in SiO 2 -Based Memristors Embedded With Pt Nanoparticles

    by G. Kleitsiotis, P. Bousoulas, S. D. Mantas, C. Tsioustas, I. A. Fyrigos, G. Sirakoulis, D. Tsoukalas

    In this work, an optimized method was implemented for attaining stable multibit operation with low energy consumption in a two-terminal memory element made from the following layers: Ag/Pt nanoparticles (NPs)/SiO2/TiN in a 1-transistor-1-memristor (1T1M) configuration. Compared to the reference sample where no NPs were embedded, an enlarged memory window of $\sim 10^{{5}}$ was recorded in conjunction with reduced variability for both switching states ( $\boldsymbol {\sigma } $ / $\boldsymbol {\mu } \lt 0.4$ ). A comprehensive numerical model was also applied to shed light on this enhanced performance, which was attributed to the spatial confinement effect induced by the presence of the Pt NPs and its impact on the properties of the percolating conducting filaments (CFs). Although 5-bit precision was demonstrated with the application of the incremental-step-pulse-programming (ISPP) algorithm, the reset process was unreliable and the output current increased abnormally when exceeded the value of $150~\boldsymbol {\mu } $ A. As a result, the multibit operation was limited. To address this issue, a modified scheme was developed to accurately control the distance between the various resistance levels and achieve highly reliable 6-bit precision. Our work provides valuable insights for the development of energy-efficient memories for applications, where a high density of conductance levels is required.


  • Open Access

    Non-Faradaic Impedimetric Detection of Heavy Metal Ions via a Hybrid Nanoparticle-DNAzyme Biosensor

    by Chrysi Panagopoulou, Evangelos Skotadis, Evangelos Aslanidis, Georgia Tzourmana, Annita Rapesi, Charalampos Tsioustas, Maria Kainourgiaki, Georgios Kleitsiotis, George Tsekenis, Dimitrios Tsoukalas

    Due to rapid industrialization, novel water-quality monitoring techniques for the detection of highly toxic and hazardous heavy metal ions are essential. Herein, a hybrid noble nanoparticle/DNAzyme electrochemical biosensor is proposed for the simultaneous and label-free detection of Pb2+ and Cr3+ in aqueous solutions. The sensor is based on the combination of a two-dimensional naked-platinum nanoparticle film and DNAzymes, whose double-helix configuration disassembles into smaller fragments in the presence of target-specific heavy metal ions. The electrochemical behavior of the fabricated sensor was investigated with non-faradaic electrochemical impedance spectroscopy (EIS), resulting in the successful detection of Pb2+ and Cr3+ well below their maximum permitted levels in tap water. So far, there has been no report on the successful detection of heavy metal ions utilizing the non-faradaic electrochemical impedance spectroscopy technique based on advanced nanomaterials paired with DNAzymes. This is also one of the few reports on the successful detection of chromium (III) via a sensor incorporating DNAzymes.


  • Open Access

    Pulse-stream impact on recognition accuracy of reservoir computing from SiO2-based low power memory devices

    by C. Tsioustas, P. Bousoulas, G. Kleitsiotis, D. Tsoukalas

    Reservoir computing (RC)-based neuromorphic applications exhibit extremely low power consumption, thus challenging the use of deep neural networks in terms of both consumption requirements and integration density. Under this perspective, this work focuses on the basic principles of RC systems. The ability of self-selective conductive-bridging random access memory devices to operate in two modes, namely, volatile and non-volatile, by regulating the applied voltage is first presented. We then investigate the relaxation time of these devices as a function of the applied amplitude and pulse duration, a critical step in determining the desired non-linearity by the reservoir. Moreover, we present an in-depth study of the impact of selecting the appropriate pulse-stream and its final effects on the total power consumption and recognition accuracy in a handwritten digit recognition application from the National Institute of Standards and Technology dataset. Finally, we conclude at the optimal pulse-stream of 3-bit, through the minimization of two cost criteria, with the total power remaining at 287 µW and simultaneously achieving 82.58% recognition accuracy upon the test set.


  • Simulation of Low Power Self-Selective Memristive Neural Networks for in situ Digital and Analogue Artificial Neural Network Applications

    by Charalampos Tsioustas, Panagiotis Bousoulas, Jack Hadfield, Theodoros Panagiotis Chatzinikolaou, Iosif-Angelos Fyrigos, Vasileios Ntinas, Michail-Antisthenis Tsompanas, Georgios Ch. Sirakoulis, Dimitris Tsoukalas

    Self-selective memory devices are considered promising candidates for suppressing the undesired sneak path currents that appear within crossbar memory structures and compromise their performance during the write and read operations. Along these lines, in this work we present forming free SiO $_{\mathbf{2}}$ -based resistive devices with inherent self-selection and self-compliance properties. The devices can operate in dual mode, since they can perform volatile threshold switching and non-volatile bipolar resistive behavior by regulating the external voltage amplitude. Interestingly, the devices exhibit low operating voltage ( $\sim$ 260 – 360 mV) and quick response time ( $\sim$ 100 ns). A comprehensive model is then developed in order to interpret this unique feature and provide valuable insights into the underlying physical mechanisms. Additionally, self-activated neural networks are theoretically investigated by performing in-situ digital and analog computations, whereas the calculated outcomes are compared with traditional neural networks with transistors as selecting elements. More specifically, a logic NAND gate and supervised learning upon the MNIST dataset is performed, while the proposed neural network architecture is tuned differently according to the application. Notably, the acquired results are comparable with the respective data where selectors have been employed, indicating the promising aspects of the proposed memristive devices. Moreover, a thorough analysis is carried out regarding the correlation between the device's linearity and the recognition's accuracy score, offering valuable insights. The proposed architecture paves the way for the development of energy-efficient artificial neural network computing architectures with tunable properties.


  • Emulating low power nociceptive functionalities with a forming-free SiO2/VOx conductive bridge memory with Pt nanoparticles

    by P. Bousoulas, Ch. Tsioustas, D. Tsoukalas

    The fabrication of low-power and scalable electronic devices that will have the ability to emulate the properties of the biological nociceptors is of great importance for the development of humanoid robots. Along these lines, in this work, an artificial nociceptive element composed of a SiO2/VOx-based bilayer configuration and a dense layer of Pt nanoparticles (NPs) as a bottom electrode is proposed. Interestingly, the device operates only under the threshold switching mode with the switching voltage as low as ∼220 mV and a huge switching ratio of 107. A systematic analysis of the impact of the bilayer configuration and the existence of the Pt NPs on the total memory performance is also provided, while a comprehensive numerical model is introduced to highlight the crucial role of the electrode material on the local temperature distribution and its influence on the memristive effect. On top of that, the proposed structure can imitate the normal, relaxation, and sensitization states of the nociceptors with about 0.3 pJ energy per spike. These enhanced properties are ascribed to the self-rupture of the Ag-based conducting filament, whereas valuable insights into the impact of the local temperature distribution on the switching dynamics are provided.


  • Low Power Stochastic Neurons From SiO2-Based Bilayer Conductive Bridge Memristors for Probabilistic Spiking Neural Network Applications—Part II: Modeling

    by P. Bousoulas, C. Tsioustas, J. Hadfield, V. Aslanidis, S. Limberopoulos, D. Tsoukalas

    A deep understanding of the underlying resistive switching mechanism for the implementation of volatile memristive properties is regarded as of great importance for enhancing their performance. Along these lines, a 2-D dynamical model is introduced to interpret the whole memristive pattern within the bilayer configuration, as well as the crucial of the dense layer of the Pt nanoparticles (NPs) on the local thermal distribution. Moreover, the probabilistic leaky-integrate-and-fire (LIF) neuron properties were simulated by considering a simple $\textit {RC}$ circuit in order to perform Bayesian extrapolation within a spiking neural network. A classification application is consequently demonstrated by using the liver tumor dataset. The advantageous capabilities of the stochastic-based spike neural networks (SNNs) are highlighted in striking contrast with the conventional artificial neural networks (ANNs), as well as the deterministic-based SNNs, in terms of prediction accuracy and power consumption.