Aixiang Tian
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Aixiang Tian has a total of 120 co-authors. Here are the top co-authors by number of shared publications:
- Jun Ying
Bohai University
48 shared publications - Xiuli Wang
Bohai University
46 shared publications Jun Ying
27 shared publications- Mengle Yang
Bohai University
20 shared publications Tao Liu
North China University of Science and Technology
16 shared publicationsXue Hou
Department of Chemistry, Bohai University, Jinzhou, 121013, P.R. China
13 shared publications
Latest Publications
- 11 November 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
Photochromic POM–Lanthanide Hybrids and Their Composite Hydrogels for Wearable Strain Sensing and Information Encryption
Organic–inorganic hybrid photochromic materials (OIHPMs) have attracted considerable attention owing to their rapid and reversible color changes upon light stimulation. In this paper, three Wells–Dawson-type P2W18-lanthanide–organic hybrid complexes (Ln = Eu, Ho, Nd) were hydrothermally synthesized: {[Eu(L)2(H2O)3][H3P2W18O62]} (1); {[Ho(L)2(H2O)3][H2P2W18O62]}·(L)·H2O (2); {[Nd2(L)4(H2O)6][P2W18O62]2}·(L)6·14H2O (3). They exhibit reversible photochromism upon UV irradiation, attributed to photoinduced electron transfer from POM oxygen donors to pyridine nitrogen acceptors. These complexes were incorporated into a sodium alginate/sulfobetaine methacrylate/polyacrylamide (SA/(AM-SBMA)) semi-interpenetrating hydrogel, yielding ASW composite hydrogels with enhanced mechanical properties and ionic conductivity. The hydrogels function as flexible strain sensors for real-time human motion monitoring. The Eu3+ complex shows characteristic red fluorescence dynamically quenched upon photochromism. The materials were further applied in inkless printing, QR code encryption, fingerprint anticounterfeiting, and photochromic PMMA films. This work provides a versatile strategy for multifunctional POM-based smart materials in wearable sensing and information security.
- 11 November 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
Photochromic POM–Lanthanide Hybrids and Their Composite Hydrogels for Wearable Strain Sensing and Information Encryption
Organic–inorganic hybrid photochromic materials (OIHPMs) have attracted considerable attention owing to their rapid and reversible color changes upon light stimulation. In this paper, three Wells–Dawson-type P2W18-lanthanide–organic hybrid complexes (Ln = Eu, Ho, Nd) were hydrothermally synthesized: {[Eu(L)2(H2O)3][H3P2W18O62]} (1); {[Ho(L)2(H2O)3][H2P2W18O62]}·(L)·H2O (2); {[Nd2(L)4(H2O)6][P2W18O62]2}·(L)6·14H2O (3). They exhibit reversible photochromism upon UV irradiation, attributed to photoinduced electron transfer from POM oxygen donors to pyridine nitrogen acceptors. These complexes were incorporated into a sodium alginate/sulfobetaine methacrylate/polyacrylamide (SA/(AM-SBMA)) semi-interpenetrating hydrogel, yielding ASW composite hydrogels with enhanced mechanical properties and ionic conductivity. The hydrogels function as flexible strain sensors for real-time human motion monitoring. The Eu3+ complex shows characteristic red fluorescence dynamically quenched upon photochromism. The materials were further applied in inkless printing, QR code encryption, fingerprint anticounterfeiting, and photochromic PMMA films. This work provides a versatile strategy for multifunctional POM-based smart materials in wearable sensing and information security.
- Open Access
- 22 September 2026
- Published by Elsevier in SSRN Electronic Journal
Syntheses, Chromic Performance, and Hydrogel Applications of Two Polyoxometalate/Viologen Compounds
Polyoxometalates (POMs) and viologen-based organic-inorganic hybrid materials exhibit sensitive chromic responses to various external stimuli (e.g. light, heat, electricity, and atmosphere) due to their reversible redox properties and abundant electron transfer pathways. In this study, two viologen compounds containing two different isopolymolybdate clusters were synthesized, namely (HBzpy)·[β-Mo8O26]0.5 (L1-Mo) and (Dbpy)·[Mo6O19] (L2-Mo) (Bzpy = 1-Benzyl-4,4'-bipyridinium chloride, Dbpy = 1,1'-Dibutyl-4,4'-bipyridinium chloride). L1-Mo and L2-Mo are based on β-type octamolybdate and Lindqvist anions, respectively. Both compounds possess zero-dimensional structures and can form supramolecular chains and network structures through hydrogen bonding interactions. Compound L1-Mo exhibits reversible photochromic properties under a Xenon lamp irradiation, while compound L2-Mo shows a color-changing response under ammonia atmosphere. Taking advantage of the photochromic performance of L1-Mo, it was incorporated into a polyacrylamide/sodium alginate (PAAm/SA) hydrogel to prepare a photochromic hydrogel (PAAm/SA/L1-Mo). Benefiting from the porous structure and double-network interpenetrating architecture of the gel, PAAm/SA/L1-Mo displays rapid and adjustable color-changing behavior. Additionally, PAAm/SA/L1-Mo demonstrates good stretchability (200%) and sensing performance, capable of responding to bending, stretching, and other motions. This research opens new possibilities for the design and application of multi-stimuli-responsive flexible electronic skin devices. Compound L1-Mo can also serve as a good ink-free printing material.
- 22 September 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessSyntheses, Chromic Performance, and Hydrogel Applications of Two Polyoxometalate/Viologen Compounds
Polyoxometalates (POMs) and viologen-based organic-inorganic hybrid materials exhibit sensitive chromic responses to various external stimuli (e.g. light, heat, electricity, and atmosphere) due to their reversible redox properties and abundant electron transfer pathways. In this study, two viologen compounds containing two different isopolymolybdate clusters were synthesized, namely (HBzpy)·[β-Mo8O26]0.5 (L1-Mo) and (Dbpy)·[Mo6O19] (L2-Mo) (Bzpy = 1-Benzyl-4,4'-bipyridinium chloride, Dbpy = 1,1'-Dibutyl-4,4'-bipyridinium chloride). L1-Mo and L2-Mo are based on β-type octamolybdate and Lindqvist anions, respectively. Both compounds possess zero-dimensional structures and can form supramolecular chains and network structures through hydrogen bonding interactions. Compound L1-Mo exhibits reversible photochromic properties under a Xenon lamp irradiation, while compound L2-Mo shows a color-changing response under ammonia atmosphere. Taking advantage of the photochromic performance of L1-Mo, it was incorporated into a polyacrylamide/sodium alginate (PAAm/SA) hydrogel to prepare a photochromic hydrogel (PAAm/SA/L1-Mo). Benefiting from the porous structure and double-network interpenetrating architecture of the gel, PAAm/SA/L1-Mo displays rapid and adjustable color-changing behavior. Additionally, PAAm/SA/L1-Mo demonstrates good stretchability (200%) and sensing performance, capable of responding to bending, stretching, and other motions. This research opens new possibilities for the design and application of multi-stimuli-responsive flexible electronic skin devices. Compound L1-Mo can also serve as a good ink-free printing material.
- 6 August 2026
- Published by American Chemical Society (ACS) in Crystal Growth & Design
Three Wells–Dawson/Lanthanide Hybrids: From Photochromic Crystals to Multifunctional Ionic Hydrogels for Wearable Sensors and Inkless Printing
Stimuli-responsive materials have attracted widespread interest due to their broad application prospects in fields such as optical anticounterfeiting, sensor technology, and information storage. In this paper, three Wells–Dawson-type polyoxometalate/lanthanide-based hybrids were hydrothermally synthesized: {[Sm2(L)4(H2O)6][H4P2W18O62]2}·(L)2 (1),{[Dy(L)2(H2O)3] [H2P2W18O62]}·(L)·2H2O (2), and {[La2(L)2(H2O)12][P2W18O62]2}·(L)6·2H2O (3). The three complexes all displayed reversible photochromism under xenon light irradiation. Mechanistic studies (EPR, XPS) reveal that the color change is due to electron transfer from the oxygen atoms of the POM framework to the pyridine nitrogen atoms of the viologen-based ligand. The complexes were incorporated into polyacrylamide/ionic liquid (PAM/PIL) hydrogels, displaying excellent mechanical performance with a distinct lanthanide-dependent trend (La > Sm > Dy), high stretchability (874% strain), conductivity, and reversible photochromism. The hydrogel demonstrates accurate sensing of human motion, such as finger bending, wrist movement, and facial expressions, pointing to potential use in electronic skin. In contrast, the La-based coating on filter paper has been used for inkless printing of patterns, QR codes, and fingerprint-based anticounterfeiting. This combined strategy holds promise for responsive materials in optical and flexible electronics.
- 6 August 2026
- Published by American Chemical Society (ACS) in Crystal Growth & Design
Three Wells–Dawson/Lanthanide Hybrids: From Photochromic Crystals to Multifunctional Ionic Hydrogels for Wearable Sensors and Inkless Printing
Stimuli-responsive materials have attracted widespread interest due to their broad application prospects in fields such as optical anticounterfeiting, sensor technology, and information storage. In this paper, three Wells–Dawson-type polyoxometalate/lanthanide-based hybrids were hydrothermally synthesized: {[Sm2(L)4(H2O)6][H4P2W18O62]2}·(L)2 (1),{[Dy(L)2(H2O)3] [H2P2W18O62]}·(L)·2H2O (2), and {[La2(L)2(H2O)12][P2W18O62]2}·(L)6·2H2O (3). The three complexes all displayed reversible photochromism under xenon light irradiation. Mechanistic studies (EPR, XPS) reveal that the color change is due to electron transfer from the oxygen atoms of the POM framework to the pyridine nitrogen atoms of the viologen-based ligand. The complexes were incorporated into polyacrylamide/ionic liquid (PAM/PIL) hydrogels, displaying excellent mechanical performance with a distinct lanthanide-dependent trend (La > Sm > Dy), high stretchability (874% strain), conductivity, and reversible photochromism. The hydrogel demonstrates accurate sensing of human motion, such as finger bending, wrist movement, and facial expressions, pointing to potential use in electronic skin. In contrast, the La-based coating on filter paper has been used for inkless printing of patterns, QR codes, and fingerprint-based anticounterfeiting. This combined strategy holds promise for responsive materials in optical and flexible electronics.
- 25 January 2026
- Published by Elsevier in Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy
- Vol. 352, 127523
Multi-stimuli-responsive lanthanide-based POM-viologen hybrids: Reversible photochromism, thermochromism, electrochromic hydrogels, and fluorescence for inkless printing and UV detection
- 25 January 2026
- Published by Elsevier in Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy
- Vol. 352, 127523
Multi-stimuli-responsive lanthanide-based POM-viologen hybrids: Reversible photochromism, thermochromism, electrochromic hydrogels, and fluorescence for inkless printing and UV detection
- 20 November 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (48) , 23546-23556
Boosting Visible Light Photocatalytic Performance of Polyoxometalate/Viologen-Based Crystalline Complexes for Cr(VI) Reduction
In order to continuously remove Cr(VI) from wastewater, it is very important to develop a photocatalyst with stable performance, especially the synergistic two-component system of photosensitive viologen and redox active polyoxometalate with excellent photocatalytic performance. In this study, three new POM/viologen-based crystalline complexes were successfully constructed by a one-pot hydrothermal method, namely, (Hmimb)2·[SiMo12O40] (1), [Ni(mimb)2(SiMo12O40)]·1.8H2O (2), and {[Ni(mimb)2(H2O)3]2·[Ni4(H2O)2(GeMo9O34)2(MoO2)2]}·9H2O (3) (mimb = 1-((3,5-dimethylisoxazol-4-yl)methyl)-[4,4'-bipyridin]-1-ium). Notably, complex 3 features a rarely reported Mo-capped Finke-type POM structure. These complexes were employed as photocatalysts for Cr(VI) reduction. Complex 3 was demonstrated superior charge separation and visible light absorption capabilities in photoelectrochemical tests, which can also be confirmed by the analysis of the minimum hydrogen bond distances and dihedral angles between adjacent unit cells in the crystal structure. Under the optimized conditions, complex 3 achieved 99.80% Cr(VI) reduction within 30 min under visible light. Moreover, complexes 1-3 exhibited strong resistance to ionic interference (anions/cations), making them highly practical for real water matrices applications. After six consecutive cycles, the Cr(VI) removal efficiency showed only 3% fluctuation. Superoxide radicals (•O2-) and photogenerated electrons (e-) dominate photocatalysis according to radical trapping experiments. This work provides critical insights for designing POM/viologen-based crystalline materials for efficient Cr(VI) reduction.
- 20 November 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (48) , 23546-23556
Boosting Visible Light Photocatalytic Performance of Polyoxometalate/Viologen-Based Crystalline Complexes for Cr(VI) Reduction
In order to continuously remove Cr(VI) from wastewater, it is very important to develop a photocatalyst with stable performance, especially the synergistic two-component system of photosensitive viologen and redox active polyoxometalate with excellent photocatalytic performance. In this study, three new POM/viologen-based crystalline complexes were successfully constructed by a one-pot hydrothermal method, namely, (Hmimb)2·[SiMo12O40] (1), [Ni(mimb)2(SiMo12O40)]·1.8H2O (2), and {[Ni(mimb)2(H2O)3]2·[Ni4(H2O)2(GeMo9O34)2(MoO2)2]}·9H2O (3) (mimb = 1-((3,5-dimethylisoxazol-4-yl)methyl)-[4,4'-bipyridin]-1-ium). Notably, complex 3 features a rarely reported Mo-capped Finke-type POM structure. These complexes were employed as photocatalysts for Cr(VI) reduction. Complex 3 was demonstrated superior charge separation and visible light absorption capabilities in photoelectrochemical tests, which can also be confirmed by the analysis of the minimum hydrogen bond distances and dihedral angles between adjacent unit cells in the crystal structure. Under the optimized conditions, complex 3 achieved 99.80% Cr(VI) reduction within 30 min under visible light. Moreover, complexes 1-3 exhibited strong resistance to ionic interference (anions/cations), making them highly practical for real water matrices applications. After six consecutive cycles, the Cr(VI) removal efficiency showed only 3% fluctuation. Superoxide radicals (•O2-) and photogenerated electrons (e-) dominate photocatalysis according to radical trapping experiments. This work provides critical insights for designing POM/viologen-based crystalline materials for efficient Cr(VI) reduction.
- 19 September 2025
- Published by Springer Nature in Microchimica Acta
- Vol. 192 (10) , 1-13
Cd/Zn-regulated POM-based complexes for the electrochemical detection and photocatalytic reduction of Cr(VI)
To address the challenge of Cr(VI) pollution in wastewater, based on the unique "electronic sponge" properties of polyoxometalates (POMs), we designed and synthesized two redox-active POM-based complexes: [CdⅡ2(dm4bt)4][GeW12O40] (1) and [ZnⅡ2(dm4bt)4][GeW12O40] (2) (dm4bt = 2,2’-dimethyl-4,4’-bithiazole). Complex 1 enables highly sensitive detection of trace Cr(VI) with a detection Limit of 0.21 μM and simultaneously serves as a photocatalyst to reduce Cr(VI) to harmless Cr(III) with 99.85% removal within 15 min. Under the same conditions, complex 2 exhibits a detection Limit of 0.30 μM and the reduction rate of Cr(VI) decreased to 93.90%. Transition metals modulate material performance by tuning both the crystal structure and band structure of the inorganic–organic hybrid materials. The high efficiency of 1 originates from the chemical bond network formed between Cd2+ and the terminal oxygens of [GeW12O40]4−, which constructs a rapid electron pathway and optimizes the energy band structure. Complex 2 exhibits attenuated performance due to restricted electron transport (dominated by hydrogen bond stacking), which is due to the core regulatory effect of the metal coordination modes in governing charge migration. This work overcomes the limitation of electron transport through a structure-performance regulation strategy, providing new ideas for the development of integrated environmental remediation materials. Graphical Abstract
- 19 September 2025
- Published by Springer Nature in Microchimica Acta
- Vol. 192 (10) , 1-13
Cd/Zn-regulated POM-based complexes for the electrochemical detection and photocatalytic reduction of Cr(VI)
To address the challenge of Cr(VI) pollution in wastewater, based on the unique "electronic sponge" properties of polyoxometalates (POMs), we designed and synthesized two redox-active POM-based complexes: [CdⅡ2(dm4bt)4][GeW12O40] (1) and [ZnⅡ2(dm4bt)4][GeW12O40] (2) (dm4bt = 2,2’-dimethyl-4,4’-bithiazole). Complex 1 enables highly sensitive detection of trace Cr(VI) with a detection Limit of 0.21 μM and simultaneously serves as a photocatalyst to reduce Cr(VI) to harmless Cr(III) with 99.85% removal within 15 min. Under the same conditions, complex 2 exhibits a detection Limit of 0.30 μM and the reduction rate of Cr(VI) decreased to 93.90%. Transition metals modulate material performance by tuning both the crystal structure and band structure of the inorganic–organic hybrid materials. The high efficiency of 1 originates from the chemical bond network formed between Cd2+ and the terminal oxygens of [GeW12O40]4−, which constructs a rapid electron pathway and optimizes the energy band structure. Complex 2 exhibits attenuated performance due to restricted electron transport (dominated by hydrogen bond stacking), which is due to the core regulatory effect of the metal coordination modes in governing charge migration. This work overcomes the limitation of electron transport through a structure-performance regulation strategy, providing new ideas for the development of integrated environmental remediation materials. Graphical Abstract
- 12 August 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (33) , 17018-17026
Two Multistimuli-Responsive POM/Viologen Hybrids: From Inkless Printing to Smart Hydrogels and Electronic Skin
In this paper, two Anderson-type polyoxometalate/viologen-based hybrids were hydrothermally synthesized, {Zn[H(1,4-pmbpy)]2(TeMo6O24)}[H2(1,4-pmbpy)](TeMo6O24)·3H2O (1) and {Co[H(1,4-pmbpy)]2(TeMo6O24)}[H2(1,4-pmbpy)](TeMo6O24)·4H2O (2). Both compounds exhibited rapid, multistimuli-responsive color changes. 1 and 2 showed rapid photochromism under a xenon lamp irradiation, changing from yellow to green within 3 and 5 min, respectively. Meanwhile, compound 2 showed reversible thermochromism. Mechanistic studies (EPR, XPS) reveal that the color change originates from electron transfer from POM oxygen donors to viologen bipyridine nitrogen acceptors, generating viologen radicals. Both compounds selectively detect NH3 and ethylenediamine by size effects. Integration into polyacrylamide/sodium alginate (PAAm/SA) hydrogels yielded gradient photochromism, tunable by crystal concentration, irradiation time, and intensity, along with ultrafast response (2 s), high toughness, and strain-sensitive conductivity. The hydrogel precisely monitors human motions (finger and wrist bending) and facial expressions, demonstrating promise for electronic skin. Moreover, compound 1-based coated filter paper has been successfully utilized in erasable, inkless printing. This synergistic strategy advances stimuli-responsive materials for optical and flexible electronics.
- 12 August 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (33) , 17018-17026
Two Multistimuli-Responsive POM/Viologen Hybrids: From Inkless Printing to Smart Hydrogels and Electronic Skin
In this paper, two Anderson-type polyoxometalate/viologen-based hybrids were hydrothermally synthesized, {Zn[H(1,4-pmbpy)]2(TeMo6O24)}[H2(1,4-pmbpy)](TeMo6O24)·3H2O (1) and {Co[H(1,4-pmbpy)]2(TeMo6O24)}[H2(1,4-pmbpy)](TeMo6O24)·4H2O (2). Both compounds exhibited rapid, multistimuli-responsive color changes. 1 and 2 showed rapid photochromism under a xenon lamp irradiation, changing from yellow to green within 3 and 5 min, respectively. Meanwhile, compound 2 showed reversible thermochromism. Mechanistic studies (EPR, XPS) reveal that the color change originates from electron transfer from POM oxygen donors to viologen bipyridine nitrogen acceptors, generating viologen radicals. Both compounds selectively detect NH3 and ethylenediamine by size effects. Integration into polyacrylamide/sodium alginate (PAAm/SA) hydrogels yielded gradient photochromism, tunable by crystal concentration, irradiation time, and intensity, along with ultrafast response (2 s), high toughness, and strain-sensitive conductivity. The hydrogel precisely monitors human motions (finger and wrist bending) and facial expressions, demonstrating promise for electronic skin. Moreover, compound 1-based coated filter paper has been successfully utilized in erasable, inkless printing. This synergistic strategy advances stimuli-responsive materials for optical and flexible electronics.
- 24 July 2025
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 25 (15) , 6308-6317
POM-Based Viologen Compounds with Dual-Functional Color-Changing Modes for Integrated Smart Windows
- 24 July 2025
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 25 (15) , 6308-6317
POM-Based Viologen Compounds with Dual-Functional Color-Changing Modes for Integrated Smart Windows
- 3 June 2025
- Published by Springer Nature in Microchimica Acta
- Vol. 192 (7) , 1-12
Hourglass-type M{P4Mo6}2 as photo-assisted electrochemical sensors for ultrasensitive detection of trace-level Cr(VI)
The development of highly sensitive photo-assisted electrochemical (PAEC) sensors for trace detection of heavy metal ions (such as chromium (VI) [Cr(VI)]) is crucial. Herein, three isomorphic compounds, namely {[M(H2O)2]2[M(HTetp)(H2O)2]2[M(P4Mo6O31H6)2]}·nH2O (M = Ni/Co/Fe, n = 5 for Ni-P4Mo6, n = 1 for Co-P4Mo6 and Fe-P4Mo6, Tetp = 4-[4-(2-Thiophen-2-yl-ethyl)-4H-[1,2,4]triazole-3-yl]-pyridine) are synthesized and directly used as electrode materials for PAEC sensors to detect Cr(VI). The excellent photo-electrochemical properties of the M{P4Mo6} based compounds originate from two key factors: (1) the synergistic combination of polyoxometalates (POMs) clusters and transition metal–organic components (TMCs), which promotes interfacial charge transfer. (2) the unique hourglass-shaped structure of the M{P4Mo6} clusters, providing abundant active sites for Cr(VI) adsorption and reduction. In particular, Ni-P4Mo6 exhibits a high sensitivity of 584.81 μA·μM−1 and an ultra-low LOD of 2.34 nM under 40 W white light, surpassing most reported Cr(VI) sensors. The detection of Cr(VI) in real water samples highlights the potential of the sensor in environmental monitoring. Graphical abstract
- 3 June 2025
- Published by Springer Nature in Microchimica Acta
- Vol. 192 (7) , 1-12
Hourglass-type M{P4Mo6}2 as photo-assisted electrochemical sensors for ultrasensitive detection of trace-level Cr(VI)
The development of highly sensitive photo-assisted electrochemical (PAEC) sensors for trace detection of heavy metal ions (such as chromium (VI) [Cr(VI)]) is crucial. Herein, three isomorphic compounds, namely {[M(H2O)2]2[M(HTetp)(H2O)2]2[M(P4Mo6O31H6)2]}·nH2O (M = Ni/Co/Fe, n = 5 for Ni-P4Mo6, n = 1 for Co-P4Mo6 and Fe-P4Mo6, Tetp = 4-[4-(2-Thiophen-2-yl-ethyl)-4H-[1,2,4]triazole-3-yl]-pyridine) are synthesized and directly used as electrode materials for PAEC sensors to detect Cr(VI). The excellent photo-electrochemical properties of the M{P4Mo6} based compounds originate from two key factors: (1) the synergistic combination of polyoxometalates (POMs) clusters and transition metal–organic components (TMCs), which promotes interfacial charge transfer. (2) the unique hourglass-shaped structure of the M{P4Mo6} clusters, providing abundant active sites for Cr(VI) adsorption and reduction. In particular, Ni-P4Mo6 exhibits a high sensitivity of 584.81 μA·μM−1 and an ultra-low LOD of 2.34 nM under 40 W white light, surpassing most reported Cr(VI) sensors. The detection of Cr(VI) in real water samples highlights the potential of the sensor in environmental monitoring. Graphical abstract
- 27 May 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (22) , 11108-11118
Fluorescence On–Off Response of Hydrogen-Bonded Viologen-Polyoxometalate Supramolecular Structure for the Determination of Ag+ in Beverages and Daily Necessities
The remarkable sensitivity of viologen ligands to external stimuli leads to discoloration, which makes them suitable for visual detection. However, the photobleaching of the viologen ligand under prolonged light irradiation has always been a challenging issue. Herein, a novel viologen-polyoxometalate (POM)-based supramolecular compound, [(HMSBP)2(β-SiMo12O40)]·2H2O (V-POM) (MSBP = 1-(4-methanesulfonyl-benzyl)-[4,4']bipyridinyl-1-ium), is synthesized using a hydrothermal method. There are abundant hydrogen bonds in the units of V-POM, which facilitate the formation of a tightly packed two-dimensional (2D) reticular structure through a layer-by-layer assembly process. The 2D V-POM structure is rich in S═O and C═N─H, which makes it possible to detect Ag+ through coordination interaction (LOD = 26.7 nM). Moreover, V-POM exhibits satisfactory recovery rates in detecting Ag+ in various water sources, beverages, and daily necessities. The V-POM-enriched hydrogel is developed, which can quickly and accurately detect Ag+ in beverages and daily necessities by RGB and HSV analysis. Additionally, a fluorescent ink capable of dual information encryption is also created by V-POM. The supramolecular self-assembly of POM and a viologen ligand offers a novel approach to enhance fluorescence stability and visual detection.
- 27 May 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (22) , 11108-11118
Fluorescence On–Off Response of Hydrogen-Bonded Viologen-Polyoxometalate Supramolecular Structure for the Determination of Ag+ in Beverages and Daily Necessities
The remarkable sensitivity of viologen ligands to external stimuli leads to discoloration, which makes them suitable for visual detection. However, the photobleaching of the viologen ligand under prolonged light irradiation has always been a challenging issue. Herein, a novel viologen-polyoxometalate (POM)-based supramolecular compound, [(HMSBP)2(β-SiMo12O40)]·2H2O (V-POM) (MSBP = 1-(4-methanesulfonyl-benzyl)-[4,4']bipyridinyl-1-ium), is synthesized using a hydrothermal method. There are abundant hydrogen bonds in the units of V-POM, which facilitate the formation of a tightly packed two-dimensional (2D) reticular structure through a layer-by-layer assembly process. The 2D V-POM structure is rich in S═O and C═N─H, which makes it possible to detect Ag+ through coordination interaction (LOD = 26.7 nM). Moreover, V-POM exhibits satisfactory recovery rates in detecting Ag+ in various water sources, beverages, and daily necessities. The V-POM-enriched hydrogel is developed, which can quickly and accurately detect Ag+ in beverages and daily necessities by RGB and HSV analysis. Additionally, a fluorescent ink capable of dual information encryption is also created by V-POM. The supramolecular self-assembly of POM and a viologen ligand offers a novel approach to enhance fluorescence stability and visual detection.