Shani T. John
Shani T. John has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
T. Srinivasan
Centre for Research and Development
3 shared publicationsKuppusamy Baskaran
Central Research Laboratory
2 shared publicationsNatarajan Muninathan
Central Research Laboratory
2 shared publications- Punniavan Sakthiselvan
Vels Institute of Science Technology and Advanced Studies (VISTAS)
2 shared publications V. Karthick
Centre for Ocean Research (DST-FIST Sponsored Centre), MoES-Earth Science & Technology Cell (ESTC), Sathyabama Institute of Science and Technology, Jeppiaar Nagar Rajiv Gandhi Salai, Chennai 600119, India
2 shared publications- Akshata Sharma
Department of Biotechnology, Vels Institute of Science, Technology and Advanced Studies, Pallavaram, Chennai, India
1 shared publication
Latest Publications
- Open Access
- 31 July 2022
- Published by Wiley in Bioinorganic Chemistry and Applications
- Vol. 2022 (1) , 4348149
Insights on the Dynamics and Toxicity of Nanoparticles in Environmental Matrices
The manufacturing rate of nanoparticles (10–100 nm) is steadily increasing due to their extensive applications in the fabrication of nanoproducts related to pharmaceuticals, cosmetics, medical devices, paints and pigments, energy storage etc. An increase in research related to nanotechnology is also a cause for the production and disposal of nanomaterials at the lab scale. As a result, contamination of environmental matrices with nanoparticles becomes inevitable, and the understanding of the risk of nanoecotoxicology is getting larger attention. In this context, focusing on the environmental hazards is essential. Hence, this manuscript aims to review the toxic effects of nanoparticles on soil, water, aquatic, and terrestrial organisms. The effects of toxicity on vertebrates, invertebrates, and plants and the source of exposure, environmental and biological dynamics, and the adverse effects of some nanoparticles are discussed.
- 31 July 2022
- Published by Wiley in Bioinorganic Chemistry and Applications
- Vol. 2022 (1) , 4348149
Open AccessInsights on the Dynamics and Toxicity of Nanoparticles in Environmental Matrices
The manufacturing rate of nanoparticles (10–100 nm) is steadily increasing due to their extensive applications in the fabrication of nanoproducts related to pharmaceuticals, cosmetics, medical devices, paints and pigments, energy storage etc. An increase in research related to nanotechnology is also a cause for the production and disposal of nanomaterials at the lab scale. As a result, contamination of environmental matrices with nanoparticles becomes inevitable, and the understanding of the risk of nanoecotoxicology is getting larger attention. In this context, focusing on the environmental hazards is essential. Hence, this manuscript aims to review the toxic effects of nanoparticles on soil, water, aquatic, and terrestrial organisms. The effects of toxicity on vertebrates, invertebrates, and plants and the source of exposure, environmental and biological dynamics, and the adverse effects of some nanoparticles are discussed.
- RetractedOpen Access
- 26 May 2022
- Published by Hindawi Limited in Advances in Materials Science and Engineering
- Vol. 2022, 1-13
Antidandruff Activity of Polyherbal (Murraya koenigii, Moringa oleifera, and Psidium guajava) Extract against Malassezia Species: In Silico Studies
Dandruff is one of the leading causes of hair fall and is commonly caused by bacterial and fungal species especially the Malassezia species. The lipolytic enzymes of the Malassezia species play an important role in obtaining lipids from the environment, and they are necessary for the growth and pathogenicity of Malassezia. Therefore, the lipases of the three most commonly (Malassezia globosa, Malassezia furfur, and Malassezia restricta) affecting Malassezia species have been taken for the In-silico studies. The three-dimensional structure of the lipase of Malassezia globosa (PDB ID: 4ZRE) was retrieved from protein data bank, and the other two proteins of the two species (Malassezia furfur and Malassezia restricta) were built using homology modelling by Swiss modeler. The lipases of the Malassezia species along with the 16 bioactive compounds of the polyherbal (Murraya koenigii, Moringa oleifera, and Psidium guajava) ethanolic extract predicted by GC-MS analysis were taken for the molecular docking studies. The pharmacokinetic properties of the bioactive compounds were predicted. Thus, the molecular docking results revealed that the bioactive compound flavone with score of 7.160Kcal/mol, isopropyl stearate with binding score of 10.107Kcal/mol, and eugenol with a binding score of 8.296Kcal/mol have shown good binding affinity against the lipase of Malassezia restricta, Malassezia globosa, and Malassezia furfur, respectively. Hence, these compounds can be further investigated by in-vitro and in-vivo studies to be used as potential drug candidates.
- 26 May 2022
- Published by Hindawi Limited in Advances in Materials Science and Engineering
- Vol. 2022, 1-13
RetractedOpen AccessAntidandruff Activity of Polyherbal (Murraya koenigii, Moringa oleifera, and Psidium guajava) Extract against Malassezia Species: In Silico Studies
Dandruff is one of the leading causes of hair fall and is commonly caused by bacterial and fungal species especially the Malassezia species. The lipolytic enzymes of the Malassezia species play an important role in obtaining lipids from the environment, and they are necessary for the growth and pathogenicity of Malassezia. Therefore, the lipases of the three most commonly (Malassezia globosa, Malassezia furfur, and Malassezia restricta) affecting Malassezia species have been taken for the In-silico studies. The three-dimensional structure of the lipase of Malassezia globosa (PDB ID: 4ZRE) was retrieved from protein data bank, and the other two proteins of the two species (Malassezia furfur and Malassezia restricta) were built using homology modelling by Swiss modeler. The lipases of the Malassezia species along with the 16 bioactive compounds of the polyherbal (Murraya koenigii, Moringa oleifera, and Psidium guajava) ethanolic extract predicted by GC-MS analysis were taken for the molecular docking studies. The pharmacokinetic properties of the bioactive compounds were predicted. Thus, the molecular docking results revealed that the bioactive compound flavone with score of 7.160Kcal/mol, isopropyl stearate with binding score of 10.107Kcal/mol, and eugenol with a binding score of 8.296Kcal/mol have shown good binding affinity against the lipase of Malassezia restricta, Malassezia globosa, and Malassezia furfur, respectively. Hence, these compounds can be further investigated by in-vitro and in-vivo studies to be used as potential drug candidates.
- Open Access
- 1 January 2022
- Published by Wiley in Journal of Nanomaterials
- Vol. 2022 (1)
Production and Characterization of Polymer Blends and Assessment of Biodegradation
Polyhydroxybutyrate (PHB), a microbial polyester well known for its high glass transition and melting temperatures, is found in the intracellular granule within microbes. Herein, we have attempted to synthesize PHB along with xyloglucan (XG) as a copolymer to lower glass transition and melting temperature. Fourier transform infrared spectroscopic (FTIR) and Scanning Electron Microscopic (SEM) analyses were used to investigate the characteristics of blend films. We found that the addition of XG resulted in increased moisture absorption of the blend films. XG‐PHB blend of ratio 80 : 20 showed the highest tensile strength and was subjected to thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) analysis. The results revealed that the XG‐PHB blend has a lower melting point (121.3°C) and lesser crystalline degree (17.26%) than PHB. TGA results showed that blend film was more thermally stable than PHB. An effort to understand and analyze microorganisms that can produce and biodegrade copolymers such as PHB‐XG is the main effort of this study which unfolds “new hope” in the field of biodegradable alternatives to plastics.
- 1 January 2022
- Published by Wiley in Journal of Nanomaterials
- Vol. 2022 (1)
Open AccessProduction and Characterization of Polymer Blends and Assessment of Biodegradation
Polyhydroxybutyrate (PHB), a microbial polyester well known for its high glass transition and melting temperatures, is found in the intracellular granule within microbes. Herein, we have attempted to synthesize PHB along with xyloglucan (XG) as a copolymer to lower glass transition and melting temperature. Fourier transform infrared spectroscopic (FTIR) and Scanning Electron Microscopic (SEM) analyses were used to investigate the characteristics of blend films. We found that the addition of XG resulted in increased moisture absorption of the blend films. XG‐PHB blend of ratio 80 : 20 showed the highest tensile strength and was subjected to thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) analysis. The results revealed that the XG‐PHB blend has a lower melting point (121.3°C) and lesser crystalline degree (17.26%) than PHB. TGA results showed that blend film was more thermally stable than PHB. An effort to understand and analyze microorganisms that can produce and biodegrade copolymers such as PHB‐XG is the main effort of this study which unfolds “new hope” in the field of biodegradable alternatives to plastics.
- Open Access
- 1 January 2022
- Published by Wiley in Bioinorganic Chemistry and Applications
- Vol. 2022 (1) , 9248988
Curcumin Is an Iconic Ligand for Detecting Environmental Pollutants
The rapid increase in industrial revolution and the consequent environmental contamination demands continuous monitoring and sensitive detection of the pollutants. Nanomaterial‐based sensing system has proved to be proficient in sensing environmental pollutants. The development of novel ligands for enhancing the sensing efficiency of nanomaterials has always been a challenge. However, the amendment of nanostructure with molecular ligand increases the sensitivity, selectivity, and analytical performance of the resulting novel sensing platform. Organic ligands are capable of increasing the adsorption efficacy, optical properties, and electrochemical properties of nanomaterials by reducing or splitting of band gap. Curcumin (diferuloylmethane) is a natural organic ligand that exhibits inherent fluorescence and electrocatalytic property. Due to keto‐enol tautomerism, it is capable of giving sensitive signals such as fluorescence, luminescence, ultraviolet absorption shifts, and electrochemical data. Curcumin probes were also reported to give enhanced meterological performances, such as low detection limit, repeatability, reproducibility, high selectivity, and high storage stability when used with nanosystem. Therefore, research on curcumin‐modified nanomaterials in the detection of environmental pollution needs a special focus for prototype and product development to enable practical use. Hence, this article reviews the role of curcumin as a natural fluorophore in optical and electrochemical sensing of environmentally significant pollutants. This review clearly shows that curcumin is an ideal candidate for developing and validating nanomaterials‐based sensors for the detection of environmental pollutants such as arsenic, lead, mercury, boron, cyanide, fluoride, nitrophenol, trinitrotoluene, and picric acid and toxic gases such as ammonia and hydrogen chloride. This review will afford references for future studies and enable researchers to translate the lab concepts into industrial products.
- 1 January 2022
- Published by Wiley in Bioinorganic Chemistry and Applications
- Vol. 2022 (1) , 9248988
Open AccessCurcumin Is an Iconic Ligand for Detecting Environmental Pollutants
The rapid increase in industrial revolution and the consequent environmental contamination demands continuous monitoring and sensitive detection of the pollutants. Nanomaterial‐based sensing system has proved to be proficient in sensing environmental pollutants. The development of novel ligands for enhancing the sensing efficiency of nanomaterials has always been a challenge. However, the amendment of nanostructure with molecular ligand increases the sensitivity, selectivity, and analytical performance of the resulting novel sensing platform. Organic ligands are capable of increasing the adsorption efficacy, optical properties, and electrochemical properties of nanomaterials by reducing or splitting of band gap. Curcumin (diferuloylmethane) is a natural organic ligand that exhibits inherent fluorescence and electrocatalytic property. Due to keto‐enol tautomerism, it is capable of giving sensitive signals such as fluorescence, luminescence, ultraviolet absorption shifts, and electrochemical data. Curcumin probes were also reported to give enhanced meterological performances, such as low detection limit, repeatability, reproducibility, high selectivity, and high storage stability when used with nanosystem. Therefore, research on curcumin‐modified nanomaterials in the detection of environmental pollution needs a special focus for prototype and product development to enable practical use. Hence, this article reviews the role of curcumin as a natural fluorophore in optical and electrochemical sensing of environmentally significant pollutants. This review clearly shows that curcumin is an ideal candidate for developing and validating nanomaterials‐based sensors for the detection of environmental pollutants such as arsenic, lead, mercury, boron, cyanide, fluoride, nitrophenol, trinitrotoluene, and picric acid and toxic gases such as ammonia and hydrogen chloride. This review will afford references for future studies and enable researchers to translate the lab concepts into industrial products.