Zully Gomez
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zully Gomez has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Javier Rodrigo-Ilarri
Instituto de Ingeniería del Agua y del Medio Ambiente (IIAMA), Universitat Politècnica de València (UPV), 46022 Valencia, Spain
2 shared publications - Johanna Karina Solano Meza
Department of Environmental Engineering, Santo Tomás University, Road 9 Street 51-11, Bogotá 110231, Colombia
2 shared publications - María-Elena Rodrigo-Clavero
Instituto de Ingeniería del Agua y del Medio Ambiente (IIAMA), Universitat Politècnica de València (UPV), 46022 Valencia, Spain
2 shared publications - David Orjuela
Universidad de Buenos Aires
1 shared publication - David Orjuela Yepes
Universidad Santo Tomás
1 shared publication - Deyner Sahamir Ríos Rojas
Universidad Santo Tomás
1 shared publication
Latest Publications
- Open Access
- 15 May 2023
- Published by Copernicus GmbH
Design of support means for the fixation of biofilms in anaerobic reactors for the treatment of leachate based on principles of biomimetic
The appropriate treatment of leachate is currently one of the priorities of municipalities and large cities for the proper management of solid waste landfills. Leachate management represent a risk for public health and a potentially high environmental impact due to the diverse content of pollutants. Specially in megacities, leachate treatment is extremely important due to the large amount of waste generated by the high demographic concentration. However, current technology used for leachate treatment requires improvements to reduce the pollutant load The “Doña Juana” sanitary landfill in Bogotá (Colombia) has a physicochemical and biological leachate treatment system. To improve the biological treatment of leachate a better reactors design to minimize the organic load of the effluent discharged into water bodies once they are treated is proposed. In this case study, the efficiency of a supported bed anaerobic reactor for the treatment of Doña Juana landfill leachate has been evaluated. A new design of the support medium for biofilm fixation is proposed considering the characteristics required to increase performance, such as the porosity of the material used, its shape and its general configuration. To improve these designs biomimicry techniques have been used, seeking to imitate elements of nature to adapt them to engineering designs. Given the versatility of different shapes and configurations that nature offers, biomimicry offers great opportunities to adapt them to functional designs, systems, processes and natural elements. In this work the fundamental bases of this discipline will be considered in the design of the support medium for anaerobic biofilms in the reactor for the treatment of leachate, so as to improve the fixation of the microorganisms responsible for the degradation of organic matter in the proposed medium.
- 15 May 2023
- Published by Copernicus GmbH
Open AccessDesign of support means for the fixation of biofilms in anaerobic reactors for the treatment of leachate based on principles of biomimetic
The appropriate treatment of leachate is currently one of the priorities of municipalities and large cities for the proper management of solid waste landfills. Leachate management represent a risk for public health and a potentially high environmental impact due to the diverse content of pollutants. Specially in megacities, leachate treatment is extremely important due to the large amount of waste generated by the high demographic concentration. However, current technology used for leachate treatment requires improvements to reduce the pollutant load The “Doña Juana” sanitary landfill in Bogotá (Colombia) has a physicochemical and biological leachate treatment system. To improve the biological treatment of leachate a better reactors design to minimize the organic load of the effluent discharged into water bodies once they are treated is proposed. In this case study, the efficiency of a supported bed anaerobic reactor for the treatment of Doña Juana landfill leachate has been evaluated. A new design of the support medium for biofilm fixation is proposed considering the characteristics required to increase performance, such as the porosity of the material used, its shape and its general configuration. To improve these designs biomimicry techniques have been used, seeking to imitate elements of nature to adapt them to engineering designs. Given the versatility of different shapes and configurations that nature offers, biomimicry offers great opportunities to adapt them to functional designs, systems, processes and natural elements. In this work the fundamental bases of this discipline will be considered in the design of the support medium for anaerobic biofilms in the reactor for the treatment of leachate, so as to improve the fixation of the microorganisms responsible for the degradation of organic matter in the proposed medium.
- Open Access
- 27 March 2022
- Published by Copernicus GmbH
Analysis of support media in packaged bioreactors for landfill leachate treatment systems
One of the primary environmental problems connected to the growth of cities is the proportional increase of solid waste production and the corresponding leachate generation in the final disposal sites. A research line on the definition of technical systems that facilitate the proper treatment of these leachates to minimize groundwater, surface water, air and soil pollution is currently being developed.One of the leachate-treatment alternatives is installing biofilm anaerobic biological reactors, in which microorganisms take charge of degrading organic matter while minimizing the leachate pollutant load. Optimal conditions are sought to develop this technology in order to achieve the highest bioreactor efficiency. Variables such as pH, temperature, retention time and the support media where the biofilm will be formed must be considered, in addition to its design and the material use to make it.Therefore, the support media is one of the most important factors in anaerobic biofilm reactors design, given its function of creating the surface where the microorganisms adhere to form the biofilm. A proper design of this packing facilitates having a greater surface area per unit volume, thus increasing contact with the microorganisms, which is expected to increase the removal rate. Taking this into account, this study analyzes the types of materials currently used for packaging, along with their efficiency in biofilm reactors for first-stage leachate treatment. The evaluation is made using a specific polymeric material composed of polyethylene and expanded polystyrene waste as support media for bioreactors
- 27 March 2022
- Published by Copernicus GmbH
Open AccessAnalysis of support media in packaged bioreactors for landfill leachate treatment systems
One of the primary environmental problems connected to the growth of cities is the proportional increase of solid waste production and the corresponding leachate generation in the final disposal sites. A research line on the definition of technical systems that facilitate the proper treatment of these leachates to minimize groundwater, surface water, air and soil pollution is currently being developed.One of the leachate-treatment alternatives is installing biofilm anaerobic biological reactors, in which microorganisms take charge of degrading organic matter while minimizing the leachate pollutant load. Optimal conditions are sought to develop this technology in order to achieve the highest bioreactor efficiency. Variables such as pH, temperature, retention time and the support media where the biofilm will be formed must be considered, in addition to its design and the material use to make it.Therefore, the support media is one of the most important factors in anaerobic biofilm reactors design, given its function of creating the surface where the microorganisms adhere to form the biofilm. A proper design of this packing facilitates having a greater surface area per unit volume, thus increasing contact with the microorganisms, which is expected to increase the removal rate. Taking this into account, this study analyzes the types of materials currently used for packaging, along with their efficiency in biofilm reactors for first-stage leachate treatment. The evaluation is made using a specific polymeric material composed of polyethylene and expanded polystyrene waste as support media for bioreactors
- Open Access
- 18 February 2022
- Published by Universidad Libre in Avances Investigación en Ingeniería
- Vol. 19 (1 (Enero-J)
Materiales compuestos de fibras naturales y polímero reciclados: mezclas, pretratamientos, agentes de acople y propiedades mecánicas. - Una revisión
This study provides a literature review of composite materials made from recycled polymers and natural fibers. The aim is to identify identify existing mixtures, as well as the influence of variables such as fiber loading, pretreatment, the use of coupling agents, and fiber size on the resulting mechanical properties of the composites. The most suitable fiber proportion for improved mechanical properties identified varies from 15 % to 40 % by weight. Furthermore, pretreatments such as NaOH and coupling agents made from maleic anhydride improve interfacial bonding between matrices and fibers, which results in improved mechanical properties. Likewise, it was found that properties such as tensile strength, tensile modulus, flexural strength, flexural modulus and impact resilience improved with the addition of fiber up to 40 % by weight. Meanwhile, impact strength, tensile strain and elongation adhered to the trend of not improving with the addition of natural fibers. Therefore, after comparing the mechanical properties of different composite material mixtures, it was found that variables such as pretreatment, the use of coupling agents, fiber size and matrix-reinforcement ratios greatly influence the produced composite materials. Moreover, it was demonstrated that even slightly changing one of the variables can radically alter the interfacial interaction.
- 18 February 2022
- Published by Universidad Libre in Avances Investigación en Ingeniería
- Vol. 19 (1 (Enero-J)
Open AccessMateriales compuestos de fibras naturales y polímero reciclados: mezclas, pretratamientos, agentes de acople y propiedades mecánicas. - Una revisión
This study provides a literature review of composite materials made from recycled polymers and natural fibers. The aim is to identify identify existing mixtures, as well as the influence of variables such as fiber loading, pretreatment, the use of coupling agents, and fiber size on the resulting mechanical properties of the composites. The most suitable fiber proportion for improved mechanical properties identified varies from 15 % to 40 % by weight. Furthermore, pretreatments such as NaOH and coupling agents made from maleic anhydride improve interfacial bonding between matrices and fibers, which results in improved mechanical properties. Likewise, it was found that properties such as tensile strength, tensile modulus, flexural strength, flexural modulus and impact resilience improved with the addition of fiber up to 40 % by weight. Meanwhile, impact strength, tensile strain and elongation adhered to the trend of not improving with the addition of natural fibers. Therefore, after comparing the mechanical properties of different composite material mixtures, it was found that variables such as pretreatment, the use of coupling agents, fiber size and matrix-reinforcement ratios greatly influence the produced composite materials. Moreover, it was demonstrated that even slightly changing one of the variables can radically alter the interfacial interaction.