Faizal Immaddudin Wira Rohmat
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Faizal Immaddudin Wira Rohmat has a total of 95 co-authors. Here are the top co-authors by number of shared publications:
Nabila Siti Burnama
6 shared publicationsMohammad Farid
Water Resources Planning and Engineering Department, Faculty of Civil and Environmental Engineering, Institut Teknologi Bandung, Bandung, Indonesia
5 shared publicationsArno Adi Kuntoro
Water Resources Planning and Engineering Department, Faculty of Civil and Environmental Engineering, Institut Teknologi Bandung, Bandung, Indonesia
4 shared publicationsHadi Kardhana
4 shared publications- Hadi Kardhana
Water Resources Engineering Research Group, Faculty of Civil and Environmental Engineering, Institut Teknologi Bandung, Jl. Ganesha No. 10, Bandung 40132, Indonesia
4 shared publications - Leon Frederik De Vos
Chair of Hydraulic Engineering, Technical University of Munich, 80333 Munich, Germany
4 shared publications
Latest Publications
- Open Access
- 2 November 2026
- Published by Elsevier in Results in Engineering
- Vol. 32
Integrated hydrological-hydraulic modeling for the 2025 Jakarta flood and its implications for urban resilience
- 2 November 2026
- Published by Elsevier in Results in Engineering
- Vol. 32
Open AccessIntegrated hydrological-hydraulic modeling for the 2025 Jakarta flood and its implications for urban resilience
- Open Access
- 27 October 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-27
Comment on egusphere-2026-4597
Flooding is a natural disaster and a long-term challenge for urban planning. Numerous studies have stated how flood risk could increase with climate change and urbanization. HEC-RAS and TELEMAC are some of the sophisticated two-dimensional modelling tools to simulate floods. However, they have different numerical schemes, especially their meshing and discretization. A comparison is needed to evaluate how their results can differ. This study simulated a historical flood event in Sapan, a region in the Upper Citarum Watershed, Indonesia, using HEC-RAS and TELEMAC. Additionally, this study investigated how both models simulate flood extent, propagation, velocities, and depths, especially from TELEMAC since it is underutilized in Indonesia. The models’ setup was configured to be equivalent. However, differences remain, especially in the building interpretation. The flood extent from both models was remarkably similar, with a 1.34 % difference in max inundated area. The main differences were velocity distribution around buildings because TELEMAC had a finer mesh. However, with a coarser mesh, HEC-RAS could simulate a similar flood extent through the utilization of subgrid bathymetry information. Both models have demonstrated good performance. HEC-RAS might be more suitable for broad-scale modelling, where inundation depth is the main concern. However, if detailed velocity mapping is needed, TELEMAC might be more suitable.
- 27 October 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-27
Open AccessComment on egusphere-2026-4597
Flooding is a natural disaster and a long-term challenge for urban planning. Numerous studies have stated how flood risk could increase with climate change and urbanization. HEC-RAS and TELEMAC are some of the sophisticated two-dimensional modelling tools to simulate floods. However, they have different numerical schemes, especially their meshing and discretization. A comparison is needed to evaluate how their results can differ. This study simulated a historical flood event in Sapan, a region in the Upper Citarum Watershed, Indonesia, using HEC-RAS and TELEMAC. Additionally, this study investigated how both models simulate flood extent, propagation, velocities, and depths, especially from TELEMAC since it is underutilized in Indonesia. The models’ setup was configured to be equivalent. However, differences remain, especially in the building interpretation. The flood extent from both models was remarkably similar, with a 1.34 % difference in max inundated area. The main differences were velocity distribution around buildings because TELEMAC had a finer mesh. However, with a coarser mesh, HEC-RAS could simulate a similar flood extent through the utilization of subgrid bathymetry information. Both models have demonstrated good performance. HEC-RAS might be more suitable for broad-scale modelling, where inundation depth is the main concern. However, if detailed velocity mapping is needed, TELEMAC might be more suitable.
- Open Access
- 7 October 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-27
Comment on egusphere-2026-4597
Flooding is a natural disaster and a long-term challenge for urban planning. Numerous studies have stated how flood risk could increase with climate change and urbanization. HEC-RAS and TELEMAC are some of the sophisticated two-dimensional modelling tools to simulate floods. However, they have different numerical schemes, especially their meshing and discretization. A comparison is needed to evaluate how their results can differ. This study simulated a historical flood event in Sapan, a region in the Upper Citarum Watershed, Indonesia, using HEC-RAS and TELEMAC. Additionally, this study investigated how both models simulate flood extent, propagation, velocities, and depths, especially from TELEMAC since it is underutilized in Indonesia. The models’ setup was configured to be equivalent. However, differences remain, especially in the building interpretation. The flood extent from both models was remarkably similar, with a 1.34 % difference in max inundated area. The main differences were velocity distribution around buildings because TELEMAC had a finer mesh. However, with a coarser mesh, HEC-RAS could simulate a similar flood extent through the utilization of subgrid bathymetry information. Both models have demonstrated good performance. HEC-RAS might be more suitable for broad-scale modelling, where inundation depth is the main concern. However, if detailed velocity mapping is needed, TELEMAC might be more suitable.
- 7 October 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-27
Open AccessComment on egusphere-2026-4597
Flooding is a natural disaster and a long-term challenge for urban planning. Numerous studies have stated how flood risk could increase with climate change and urbanization. HEC-RAS and TELEMAC are some of the sophisticated two-dimensional modelling tools to simulate floods. However, they have different numerical schemes, especially their meshing and discretization. A comparison is needed to evaluate how their results can differ. This study simulated a historical flood event in Sapan, a region in the Upper Citarum Watershed, Indonesia, using HEC-RAS and TELEMAC. Additionally, this study investigated how both models simulate flood extent, propagation, velocities, and depths, especially from TELEMAC since it is underutilized in Indonesia. The models’ setup was configured to be equivalent. However, differences remain, especially in the building interpretation. The flood extent from both models was remarkably similar, with a 1.34 % difference in max inundated area. The main differences were velocity distribution around buildings because TELEMAC had a finer mesh. However, with a coarser mesh, HEC-RAS could simulate a similar flood extent through the utilization of subgrid bathymetry information. Both models have demonstrated good performance. HEC-RAS might be more suitable for broad-scale modelling, where inundation depth is the main concern. However, if detailed velocity mapping is needed, TELEMAC might be more suitable.
- 25 September 2026
- Published by Springer Nature in Modeling Earth Systems and Environment
- Vol. 12 (5) , 260
Three-dimensional hydrodynamic model adequacy in simulating tidal and density-driven flows of Alas Strait, a minor Indonesian throughflow outlet: revealing the model dependency on validation strategies
- 25 September 2026
- Published by Springer Nature in Modeling Earth Systems and Environment
- Vol. 12 (5) , 260
Three-dimensional hydrodynamic model adequacy in simulating tidal and density-driven flows of Alas Strait, a minor Indonesian throughflow outlet: revealing the model dependency on validation strategies
- Open Access
- 15 September 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-27
Comparative Study of HEC-RAS and TELEMAC for Two-Dimensional Flood Simulation in a Densely Built Urban Area
Flooding is a natural disaster and a long-term challenge for urban planning. Numerous studies have stated how flood risk could increase with climate change and urbanization. HEC-RAS and TELEMAC are some of the sophisticated two-dimensional modelling tools to simulate floods. However, they have different numerical schemes, especially their meshing and discretization. A comparison is needed to evaluate how their results can differ. This study simulated a historical flood event in Sapan, a region in the Upper Citarum Watershed, Indonesia, using HEC-RAS and TELEMAC. Additionally, this study investigated how both models simulate flood extent, propagation, velocities, and depths, especially from TELEMAC since it is underutilized in Indonesia. The models’ setup was configured to be equivalent. However, differences remain, especially in the building interpretation. The flood extent from both models was remarkably similar, with a 1.34 % difference in max inundated area. The main differences were velocity distribution around buildings because TELEMAC had a finer mesh. However, with a coarser mesh, HEC-RAS could simulate a similar flood extent through the utilization of subgrid bathymetry information. Both models have demonstrated good performance. HEC-RAS might be more suitable for broad-scale modelling, where inundation depth is the main concern. However, if detailed velocity mapping is needed, TELEMAC might be more suitable.
- 15 September 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-27
Open AccessComparative Study of HEC-RAS and TELEMAC for Two-Dimensional Flood Simulation in a Densely Built Urban Area
Flooding is a natural disaster and a long-term challenge for urban planning. Numerous studies have stated how flood risk could increase with climate change and urbanization. HEC-RAS and TELEMAC are some of the sophisticated two-dimensional modelling tools to simulate floods. However, they have different numerical schemes, especially their meshing and discretization. A comparison is needed to evaluate how their results can differ. This study simulated a historical flood event in Sapan, a region in the Upper Citarum Watershed, Indonesia, using HEC-RAS and TELEMAC. Additionally, this study investigated how both models simulate flood extent, propagation, velocities, and depths, especially from TELEMAC since it is underutilized in Indonesia. The models’ setup was configured to be equivalent. However, differences remain, especially in the building interpretation. The flood extent from both models was remarkably similar, with a 1.34 % difference in max inundated area. The main differences were velocity distribution around buildings because TELEMAC had a finer mesh. However, with a coarser mesh, HEC-RAS could simulate a similar flood extent through the utilization of subgrid bathymetry information. Both models have demonstrated good performance. HEC-RAS might be more suitable for broad-scale modelling, where inundation depth is the main concern. However, if detailed velocity mapping is needed, TELEMAC might be more suitable.
- Open Access
- 2 August 2026
- Published by Elsevier in International Journal of Disaster Risk Reduction
- Vol. 143
Revisiting flood resilience: How social–ecological interactions shape flood risk management policy and practice in Indonesia's riverbank urban slums
- 2 August 2026
- Published by Elsevier in International Journal of Disaster Risk Reduction
- Vol. 143
Open AccessRevisiting flood resilience: How social–ecological interactions shape flood risk management policy and practice in Indonesia's riverbank urban slums
- Open Access
- 31 May 2026
- Published by Puslitbang Sumber Daya Air Kementerian PUPR in JURNAL SUMBER DAYA AIR
- Vol. 22 (1) , 55-66
LSTM (Long Short-Term Memory)-based Hydrograph Modeling for Pandanduri Reservoir, Indonesia
Dams are vital infrastructure that supports irrigation, raw water supply, flood control, hydroelectric power, and tourism. Reservoirs of the dam store the water during the rainy season and release it in the dry season to reduce the flood risk. Continuous monitoring is essential to ensure their optimal function and safe operation. However, in many developing regions, the availability and quality of discharge data remain inadequate due to poor data governance, limited resources, and insufficient digital infrastructure. These challenges highlight the need for new approaches capable of improving discharge prediction under limited data conditions. To address this issue, Machine Learning (ML) has gained popularity in hydrological research. Long Short-Term Memory (LSTM) is one of the ML methods that has proven effective for analyzing historical data patterns for prediction. This study uses an LSTM-based hydrograph model in the Pandanduri Reservoir Watershed, Indonesia. Compared to conventional statistical or conceptual models, LSTM offers the advantage of capturing nonlinear dynamics in long time-series datasets. The model utilized open data, including satellite rainfall data, meteorological data, and streamflow data records, to capture the complex relationship between rainfall and streamflow. The generated model was validated with the recorded streamflow data. The model evaluation produces an NSE of 0.44 and an RMSE of 0.74. These values indicate that the model is capable of reproducing key rainfall–runoff dynamics under data-limited conditions. Further research is essential to improve the ability of LSTM to capture extreme events and improve its generalization across hydrological conditions.
- 31 May 2026
- Published by Puslitbang Sumber Daya Air Kementerian PUPR in JURNAL SUMBER DAYA AIR
- Vol. 22 (1) , 55-66
Open AccessLSTM (Long Short-Term Memory)-based Hydrograph Modeling for Pandanduri Reservoir, Indonesia
Dams are vital infrastructure that supports irrigation, raw water supply, flood control, hydroelectric power, and tourism. Reservoirs of the dam store the water during the rainy season and release it in the dry season to reduce the flood risk. Continuous monitoring is essential to ensure their optimal function and safe operation. However, in many developing regions, the availability and quality of discharge data remain inadequate due to poor data governance, limited resources, and insufficient digital infrastructure. These challenges highlight the need for new approaches capable of improving discharge prediction under limited data conditions. To address this issue, Machine Learning (ML) has gained popularity in hydrological research. Long Short-Term Memory (LSTM) is one of the ML methods that has proven effective for analyzing historical data patterns for prediction. This study uses an LSTM-based hydrograph model in the Pandanduri Reservoir Watershed, Indonesia. Compared to conventional statistical or conceptual models, LSTM offers the advantage of capturing nonlinear dynamics in long time-series datasets. The model utilized open data, including satellite rainfall data, meteorological data, and streamflow data records, to capture the complex relationship between rainfall and streamflow. The generated model was validated with the recorded streamflow data. The model evaluation produces an NSE of 0.44 and an RMSE of 0.74. These values indicate that the model is capable of reproducing key rainfall–runoff dynamics under data-limited conditions. Further research is essential to improve the ability of LSTM to capture extreme events and improve its generalization across hydrological conditions.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Efficient and Automated Mesh Generation for Refined Flood Modeling in Complex Urban Environments
Accurate two-dimensional hydrodynamic flood modeling in urban environments requires mesh resolutions that can capture complex flow patterns around buildings and infrastructure, while maintaining computational efficiency. However, generating suitable meshes for such applications is often time-consuming, mainly due to the complex layout of buildings in urban areas. This contribution presents an efficient and automated mesh generation workflow tailored for refined 2D flood modeling in complex urban areas. The approach introduces rule-based local mesh refinements around buildings, flow paths, and critical urban features, while maintaining a coarse resolution elsewhere. First, geometrical input data sets, such as building outlines or water body outlines, are preprocessed to ensure their geometric validity. The building geometry data set is then further analyzed and processed to ensure a refined, yet not excessive, mesh resolution between buildings, taking into account user-given thresholds for mesh resolution. Finally, the mesh is generated based on the processed input data using the Triangle mesher developed by Shewchuck (1996). The framework is designed to be automated yet user-controlled, enabling reproducible and scalable mesh generation for urban flood hazard assessment. Its performance is demonstrated through application to an urban test case in Majalaya, Indonesia, highlighting improvements in accuracy–efficiency trade-offs and suitability for operational flood risk modeling.Reference:Shewchuk, J. R.: Triangle: Engineering a 2D Quality Mesh Generator and Delaunay Triangulator, in: Applied Computational Geometry: Towards Geometric Engineering, edited by Lin, M. C. and Manocha, D., vol. 1148 of Lecture Notes in Computer Science, pp. 203–222, Springer-Verlag, from the First ACM Workshop on Applied Computational Geometry, 1996.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessEfficient and Automated Mesh Generation for Refined Flood Modeling in Complex Urban Environments
Accurate two-dimensional hydrodynamic flood modeling in urban environments requires mesh resolutions that can capture complex flow patterns around buildings and infrastructure, while maintaining computational efficiency. However, generating suitable meshes for such applications is often time-consuming, mainly due to the complex layout of buildings in urban areas. This contribution presents an efficient and automated mesh generation workflow tailored for refined 2D flood modeling in complex urban areas. The approach introduces rule-based local mesh refinements around buildings, flow paths, and critical urban features, while maintaining a coarse resolution elsewhere. First, geometrical input data sets, such as building outlines or water body outlines, are preprocessed to ensure their geometric validity. The building geometry data set is then further analyzed and processed to ensure a refined, yet not excessive, mesh resolution between buildings, taking into account user-given thresholds for mesh resolution. Finally, the mesh is generated based on the processed input data using the Triangle mesher developed by Shewchuck (1996). The framework is designed to be automated yet user-controlled, enabling reproducible and scalable mesh generation for urban flood hazard assessment. Its performance is demonstrated through application to an urban test case in Majalaya, Indonesia, highlighting improvements in accuracy–efficiency trade-offs and suitability for operational flood risk modeling.Reference:Shewchuk, J. R.: Triangle: Engineering a 2D Quality Mesh Generator and Delaunay Triangulator, in: Applied Computational Geometry: Towards Geometric Engineering, edited by Lin, M. C. and Manocha, D., vol. 1148 of Lecture Notes in Computer Science, pp. 203–222, Springer-Verlag, from the First ACM Workshop on Applied Computational Geometry, 1996.
- Open Access
- 14 March 2026
- Published by Elsevier in Environmental Challenges
- Vol. 23
From unreliable observations to reliable forecasts: Enhancing Jakarta flood prediction using HEC-HMS-assisted LSTM modeling
- 14 March 2026
- Published by Elsevier in Environmental Challenges
- Vol. 23
Open AccessFrom unreliable observations to reliable forecasts: Enhancing Jakarta flood prediction using HEC-HMS-assisted LSTM modeling
- Open Access
- 26 August 2025
- Published by Elsevier in Results in Engineering
- Vol. 27
Post-normalization sedimentation in the Citarum Majalaya River: Patterns, impacts, and mitigation strategies
- 26 August 2025
- Published by Elsevier in Results in Engineering
- Vol. 27
Open AccessPost-normalization sedimentation in the Citarum Majalaya River: Patterns, impacts, and mitigation strategies