Alain Pietroniro
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Alain Pietroniro has a total of 163 co-authors. Here are the top co-authors by number of shared publications:
- Wouter Johannes Maria Knoben
Schulich School of Engineering, University of Calgary, Calgary, Alberta, Canada
25 shared publications Martyn P. Clark
Schulich School of Engineering, Department of Civil Engineering, University of Calgary, Calgary, Alberta, Canada
19 shared publications- Andrew W. Wood
National Center for Atmospheric Research (UCAR), Unknown, Boulder, CO, United States [US
15 shared publications - John Willard Pomeroy
Centre for Hydrology, University of Saskatchewan, Saskatoon, SK, Canada
13 shared publications - Paul H. Whitfield
Centre for Hydrology, University of Saskatchewan, Canmore, AB, Canada
12 shared publications - Cyril Thébault
Schulich School of Engineering, University of Calgary, Calgary, Alberta, Canada
11 shared publications
Latest Publications
- Open Access
- 4 November 2026
- Published by Taylor & Francis in Canadian Water Resources Journal / Revue canadienne des ressources hydriques
- p. 1-3
James P bruce, 1928–2026 – a national hero for Canada’s water and environmental science
- 4 November 2026
- Published by Taylor & Francis in Canadian Water Resources Journal / Revue canadienne des ressources hydriques
- p. 1-3
Open AccessJames P bruce, 1928–2026 – a national hero for Canada’s water and environmental science
- Open Access
- 2 November 2026
- Published by Taylor & Francis in Canadian Water Resources Journal / Revue canadienne des ressources hydriques
- p. 1-26
Hydrological model intercomparison in cold regions: challenges, insights, and future paths – a case from Nelson-MIP II
Hydrological model intercomparison studies have been conducted to test the usefulness and limitations of currently available hydrological models. Such studies have been conducted mainly to identify...
- 2 November 2026
- Published by Taylor & Francis in Canadian Water Resources Journal / Revue canadienne des ressources hydriques
- p. 1-26
Open AccessHydrological model intercomparison in cold regions: challenges, insights, and future paths – a case from Nelson-MIP II
Hydrological model intercomparison studies have been conducted to test the usefulness and limitations of currently available hydrological models. Such studies have been conducted mainly to identify...
- Open Access
- 6 October 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-34
Comment on egusphere-2026-3559
NEMO-GSL v1.0 is a three-dimensional hydrodynamic and ice configuration of Great Slave Lake (GSL), the deepest lake in North America and a central component of the Mackenzie River system, built on NEMO v5.0 with the SI3 ice module. The configuration targets conditions absent from ocean and temperate large-lake setups: weak, temperature-controlled stratification, seasonal ice cover exceeding seven months annually, and water levels governed by riverine throughflow. Simulation domain construction required a basin-wide bathymetric product, generated by Universal Kriging of digitized nautical charts, sparse soundings and crowd-sourced depths onto a 1 km grid with 81 vertical levels. Adaptations from NEMO defaults include generic length scale k–ω closure with the Canuto B stability function for weakly stratified freshwater, adjusted SI3 snow conductivity and ice albedo for freshwater ice under prolonged cover, and a modified river routine in which outflow is computed from mean lake level using monthly stage–discharge relationships, with a hydrostatic correction for the ice and snow load applied in winter. The configuration is forced by CaSR v3.2 atmospheric reanalysis and MESH-derived runoff. Evaluation over 1998–2001 against thermistor profiles at six stations, eddy-covariance evaporation, satellite-derived lake surface water temperature (LSWT) and ice phenology yields water-column RMSE of 2.08 °C, LSWT RMSE of 1.68 °C, mixed-layer depth (MLD) MAE of 6.42 m, seasonal evaporation totals within 0.25 % of observations, and ice freeze-up and break-up errors of 1 and 2 days, respectively. Forcing sensitivity experiments reveal wind forcing as the dominant control on simulated mixed layer depth. The bathymetric reconstruction methodology, ice–turbulence parameterization protocol, and river-forcing coupling strategy developed here are independent of GSL-specific inputs and are intended for reuse in other data-scarce, ice-covered lakes. Together, these developments are designed to establish a replicable workflow for subarctic lake modeling, extending NEMO’s application domain beyond the contexts of ocean and temperate large lakes.
- 6 October 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-34
Open AccessComment on egusphere-2026-3559
NEMO-GSL v1.0 is a three-dimensional hydrodynamic and ice configuration of Great Slave Lake (GSL), the deepest lake in North America and a central component of the Mackenzie River system, built on NEMO v5.0 with the SI3 ice module. The configuration targets conditions absent from ocean and temperate large-lake setups: weak, temperature-controlled stratification, seasonal ice cover exceeding seven months annually, and water levels governed by riverine throughflow. Simulation domain construction required a basin-wide bathymetric product, generated by Universal Kriging of digitized nautical charts, sparse soundings and crowd-sourced depths onto a 1 km grid with 81 vertical levels. Adaptations from NEMO defaults include generic length scale k–ω closure with the Canuto B stability function for weakly stratified freshwater, adjusted SI3 snow conductivity and ice albedo for freshwater ice under prolonged cover, and a modified river routine in which outflow is computed from mean lake level using monthly stage–discharge relationships, with a hydrostatic correction for the ice and snow load applied in winter. The configuration is forced by CaSR v3.2 atmospheric reanalysis and MESH-derived runoff. Evaluation over 1998–2001 against thermistor profiles at six stations, eddy-covariance evaporation, satellite-derived lake surface water temperature (LSWT) and ice phenology yields water-column RMSE of 2.08 °C, LSWT RMSE of 1.68 °C, mixed-layer depth (MLD) MAE of 6.42 m, seasonal evaporation totals within 0.25 % of observations, and ice freeze-up and break-up errors of 1 and 2 days, respectively. Forcing sensitivity experiments reveal wind forcing as the dominant control on simulated mixed layer depth. The bathymetric reconstruction methodology, ice–turbulence parameterization protocol, and river-forcing coupling strategy developed here are independent of GSL-specific inputs and are intended for reuse in other data-scarce, ice-covered lakes. Together, these developments are designed to establish a replicable workflow for subarctic lake modeling, extending NEMO’s application domain beyond the contexts of ocean and temperate large lakes.
- Open Access
- 28 September 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-34
Comment on egusphere-2026-3559
NEMO-GSL v1.0 is a three-dimensional hydrodynamic and ice configuration of Great Slave Lake (GSL), the deepest lake in North America and a central component of the Mackenzie River system, built on NEMO v5.0 with the SI3 ice module. The configuration targets conditions absent from ocean and temperate large-lake setups: weak, temperature-controlled stratification, seasonal ice cover exceeding seven months annually, and water levels governed by riverine throughflow. Simulation domain construction required a basin-wide bathymetric product, generated by Universal Kriging of digitized nautical charts, sparse soundings and crowd-sourced depths onto a 1 km grid with 81 vertical levels. Adaptations from NEMO defaults include generic length scale k–ω closure with the Canuto B stability function for weakly stratified freshwater, adjusted SI3 snow conductivity and ice albedo for freshwater ice under prolonged cover, and a modified river routine in which outflow is computed from mean lake level using monthly stage–discharge relationships, with a hydrostatic correction for the ice and snow load applied in winter. The configuration is forced by CaSR v3.2 atmospheric reanalysis and MESH-derived runoff. Evaluation over 1998–2001 against thermistor profiles at six stations, eddy-covariance evaporation, satellite-derived lake surface water temperature (LSWT) and ice phenology yields water-column RMSE of 2.08 °C, LSWT RMSE of 1.68 °C, mixed-layer depth (MLD) MAE of 6.42 m, seasonal evaporation totals within 0.25 % of observations, and ice freeze-up and break-up errors of 1 and 2 days, respectively. Forcing sensitivity experiments reveal wind forcing as the dominant control on simulated mixed layer depth. The bathymetric reconstruction methodology, ice–turbulence parameterization protocol, and river-forcing coupling strategy developed here are independent of GSL-specific inputs and are intended for reuse in other data-scarce, ice-covered lakes. Together, these developments are designed to establish a replicable workflow for subarctic lake modeling, extending NEMO’s application domain beyond the contexts of ocean and temperate large lakes.
- 28 September 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-34
Open AccessComment on egusphere-2026-3559
NEMO-GSL v1.0 is a three-dimensional hydrodynamic and ice configuration of Great Slave Lake (GSL), the deepest lake in North America and a central component of the Mackenzie River system, built on NEMO v5.0 with the SI3 ice module. The configuration targets conditions absent from ocean and temperate large-lake setups: weak, temperature-controlled stratification, seasonal ice cover exceeding seven months annually, and water levels governed by riverine throughflow. Simulation domain construction required a basin-wide bathymetric product, generated by Universal Kriging of digitized nautical charts, sparse soundings and crowd-sourced depths onto a 1 km grid with 81 vertical levels. Adaptations from NEMO defaults include generic length scale k–ω closure with the Canuto B stability function for weakly stratified freshwater, adjusted SI3 snow conductivity and ice albedo for freshwater ice under prolonged cover, and a modified river routine in which outflow is computed from mean lake level using monthly stage–discharge relationships, with a hydrostatic correction for the ice and snow load applied in winter. The configuration is forced by CaSR v3.2 atmospheric reanalysis and MESH-derived runoff. Evaluation over 1998–2001 against thermistor profiles at six stations, eddy-covariance evaporation, satellite-derived lake surface water temperature (LSWT) and ice phenology yields water-column RMSE of 2.08 °C, LSWT RMSE of 1.68 °C, mixed-layer depth (MLD) MAE of 6.42 m, seasonal evaporation totals within 0.25 % of observations, and ice freeze-up and break-up errors of 1 and 2 days, respectively. Forcing sensitivity experiments reveal wind forcing as the dominant control on simulated mixed layer depth. The bathymetric reconstruction methodology, ice–turbulence parameterization protocol, and river-forcing coupling strategy developed here are independent of GSL-specific inputs and are intended for reuse in other data-scarce, ice-covered lakes. Together, these developments are designed to establish a replicable workflow for subarctic lake modeling, extending NEMO’s application domain beyond the contexts of ocean and temperate large lakes.
- Open Access
- 7 September 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-34
Comment on egusphere-2026-3559
NEMO-GSL v1.0 is a three-dimensional hydrodynamic and ice configuration of Great Slave Lake (GSL), the deepest lake in North America and a central component of the Mackenzie River system, built on NEMO v5.0 with the SI3 ice module. The configuration targets conditions absent from ocean and temperate large-lake setups: weak, temperature-controlled stratification, seasonal ice cover exceeding seven months annually, and water levels governed by riverine throughflow. Simulation domain construction required a basin-wide bathymetric product, generated by Universal Kriging of digitized nautical charts, sparse soundings and crowd-sourced depths onto a 1 km grid with 81 vertical levels. Adaptations from NEMO defaults include generic length scale k–ω closure with the Canuto B stability function for weakly stratified freshwater, adjusted SI3 snow conductivity and ice albedo for freshwater ice under prolonged cover, and a modified river routine in which outflow is computed from mean lake level using monthly stage–discharge relationships, with a hydrostatic correction for the ice and snow load applied in winter. The configuration is forced by CaSR v3.2 atmospheric reanalysis and MESH-derived runoff. Evaluation over 1998–2001 against thermistor profiles at six stations, eddy-covariance evaporation, satellite-derived lake surface water temperature (LSWT) and ice phenology yields water-column RMSE of 2.08 °C, LSWT RMSE of 1.68 °C, mixed-layer depth (MLD) MAE of 6.42 m, seasonal evaporation totals within 0.25 % of observations, and ice freeze-up and break-up errors of 1 and 2 days, respectively. Forcing sensitivity experiments reveal wind forcing as the dominant control on simulated mixed layer depth. The bathymetric reconstruction methodology, ice–turbulence parameterization protocol, and river-forcing coupling strategy developed here are independent of GSL-specific inputs and are intended for reuse in other data-scarce, ice-covered lakes. Together, these developments are designed to establish a replicable workflow for subarctic lake modeling, extending NEMO’s application domain beyond the contexts of ocean and temperate large lakes.
- 7 September 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-34
Open AccessComment on egusphere-2026-3559
NEMO-GSL v1.0 is a three-dimensional hydrodynamic and ice configuration of Great Slave Lake (GSL), the deepest lake in North America and a central component of the Mackenzie River system, built on NEMO v5.0 with the SI3 ice module. The configuration targets conditions absent from ocean and temperate large-lake setups: weak, temperature-controlled stratification, seasonal ice cover exceeding seven months annually, and water levels governed by riverine throughflow. Simulation domain construction required a basin-wide bathymetric product, generated by Universal Kriging of digitized nautical charts, sparse soundings and crowd-sourced depths onto a 1 km grid with 81 vertical levels. Adaptations from NEMO defaults include generic length scale k–ω closure with the Canuto B stability function for weakly stratified freshwater, adjusted SI3 snow conductivity and ice albedo for freshwater ice under prolonged cover, and a modified river routine in which outflow is computed from mean lake level using monthly stage–discharge relationships, with a hydrostatic correction for the ice and snow load applied in winter. The configuration is forced by CaSR v3.2 atmospheric reanalysis and MESH-derived runoff. Evaluation over 1998–2001 against thermistor profiles at six stations, eddy-covariance evaporation, satellite-derived lake surface water temperature (LSWT) and ice phenology yields water-column RMSE of 2.08 °C, LSWT RMSE of 1.68 °C, mixed-layer depth (MLD) MAE of 6.42 m, seasonal evaporation totals within 0.25 % of observations, and ice freeze-up and break-up errors of 1 and 2 days, respectively. Forcing sensitivity experiments reveal wind forcing as the dominant control on simulated mixed layer depth. The bathymetric reconstruction methodology, ice–turbulence parameterization protocol, and river-forcing coupling strategy developed here are independent of GSL-specific inputs and are intended for reuse in other data-scarce, ice-covered lakes. Together, these developments are designed to establish a replicable workflow for subarctic lake modeling, extending NEMO’s application domain beyond the contexts of ocean and temperate large lakes.
- Open Access
- 1 September 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-34
NEMO-GSL v1.0: An integrated hydrodynamic and ice-process model for a deep subarctic lake (Great Slave Lake, Canada)
NEMO-GSL v1.0 is a three-dimensional hydrodynamic and ice configuration of Great Slave Lake (GSL), the deepest lake in North America and a central component of the Mackenzie River system, built on NEMO v5.0 with the SI3 ice module. The configuration targets conditions absent from ocean and temperate large-lake setups: weak, temperature-controlled stratification, seasonal ice cover exceeding seven months annually, and water levels governed by riverine throughflow. Simulation domain construction required a basin-wide bathymetric product, generated by Universal Kriging of digitized nautical charts, sparse soundings and crowd-sourced depths onto a 1 km grid with 81 vertical levels. Adaptations from NEMO defaults include generic length scale k–ω closure with the Canuto B stability function for weakly stratified freshwater, adjusted SI3 snow conductivity and ice albedo for freshwater ice under prolonged cover, and a modified river routine in which outflow is computed from mean lake level using monthly stage–discharge relationships, with a hydrostatic correction for the ice and snow load applied in winter. The configuration is forced by CaSR v3.2 atmospheric reanalysis and MESH-derived runoff. Evaluation over 1998–2001 against thermistor profiles at six stations, eddy-covariance evaporation, satellite-derived lake surface water temperature (LSWT) and ice phenology yields water-column RMSE of 2.08 °C, LSWT RMSE of 1.68 °C, mixed-layer depth (MLD) MAE of 6.42 m, seasonal evaporation totals within 0.25 % of observations, and ice freeze-up and break-up errors of 1 and 2 days, respectively. Forcing sensitivity experiments reveal wind forcing as the dominant control on simulated mixed layer depth. The bathymetric reconstruction methodology, ice–turbulence parameterization protocol, and river-forcing coupling strategy developed here are independent of GSL-specific inputs and are intended for reuse in other data-scarce, ice-covered lakes. Together, these developments are designed to establish a replicable workflow for subarctic lake modeling, extending NEMO’s application domain beyond the contexts of ocean and temperate large lakes.
- 1 September 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-34
Open AccessNEMO-GSL v1.0: An integrated hydrodynamic and ice-process model for a deep subarctic lake (Great Slave Lake, Canada)
NEMO-GSL v1.0 is a three-dimensional hydrodynamic and ice configuration of Great Slave Lake (GSL), the deepest lake in North America and a central component of the Mackenzie River system, built on NEMO v5.0 with the SI3 ice module. The configuration targets conditions absent from ocean and temperate large-lake setups: weak, temperature-controlled stratification, seasonal ice cover exceeding seven months annually, and water levels governed by riverine throughflow. Simulation domain construction required a basin-wide bathymetric product, generated by Universal Kriging of digitized nautical charts, sparse soundings and crowd-sourced depths onto a 1 km grid with 81 vertical levels. Adaptations from NEMO defaults include generic length scale k–ω closure with the Canuto B stability function for weakly stratified freshwater, adjusted SI3 snow conductivity and ice albedo for freshwater ice under prolonged cover, and a modified river routine in which outflow is computed from mean lake level using monthly stage–discharge relationships, with a hydrostatic correction for the ice and snow load applied in winter. The configuration is forced by CaSR v3.2 atmospheric reanalysis and MESH-derived runoff. Evaluation over 1998–2001 against thermistor profiles at six stations, eddy-covariance evaporation, satellite-derived lake surface water temperature (LSWT) and ice phenology yields water-column RMSE of 2.08 °C, LSWT RMSE of 1.68 °C, mixed-layer depth (MLD) MAE of 6.42 m, seasonal evaporation totals within 0.25 % of observations, and ice freeze-up and break-up errors of 1 and 2 days, respectively. Forcing sensitivity experiments reveal wind forcing as the dominant control on simulated mixed layer depth. The bathymetric reconstruction methodology, ice–turbulence parameterization protocol, and river-forcing coupling strategy developed here are independent of GSL-specific inputs and are intended for reuse in other data-scarce, ice-covered lakes. Together, these developments are designed to establish a replicable workflow for subarctic lake modeling, extending NEMO’s application domain beyond the contexts of ocean and temperate large lakes.
- Open Access
- 11 June 2026
- Published by Taylor & Francis in Canadian Water Resources Journal / Revue canadienne des ressources hydriques
- Vol. 51 (3) , 1-4
Shared currents: stewarding Canada’s water commons
- 11 June 2026
- Published by Taylor & Francis in Canadian Water Resources Journal / Revue canadienne des ressources hydriques
- Vol. 51 (3) , 1-4
Open AccessShared currents: stewarding Canada’s water commons
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
The impact of benchmark selection on spatial patterns of model evaluation metrics
Hydrological model evaluation is often performed with aggregated metrics such as the widely used Nash Sutcliffe Efficiency (NSE). The NSE is a skill score that can be interpreted as using the mean observed flow as a benchmark against which to compare model performance. However, this results in strong spatial patterns of scores that conflate model skill with flow variability, depending on how appropriate the benchmark model is for the catchment at hand. These patterns make it difficult to compare NSE scores across catchments which complicates model evaluation and comparison. This work addresses this limitation by using alternative formulations of the NSE that replace the mean observed flow term with various other benchmark simulations (called “benchmark efficiencies”, BME). BME values were calculated for an ensemble of 20 simple benchmarks, using hydrological model simulations from 960 basins in North America as a test case. The benchmarks vary from simple statistics calculated directly from the streamflow series to extremely simple models that try to capture the main outcomes of catchment behavior.Results show that alternative benchmarks show spatial patterns of model performance that differ from those of the NSE, due to differences in how well the individual benchmarks capture flow variability in different regions. Benchmarks that effectively capture flow variability in a given catchment result in a low BME score and are a more challenging test of model performance. As such, selecting the lowest BME score in each catchment can reduce the spatial patterns in model scores by ensuring that the model is always being compared to the benchmark that best captures the flow variability of the catchment. The highest NSE scores were all found in catchments with strongly seasonal flow regimes, but the highest BME scores came from a more even distribution of flow regimes. Indeed, several catchments with strongly seasonal flow regimes had NSE scores above 0.5 with negative corresponding BME scores. This indicates that failing to use appropriate benchmarks for BME calculations in catchments with a strongly seasonal flow regime can mask the fact that the model cannot beat simple benchmarks and may provide an overly optimistic assessment of model performance. By selecting the most appropriate benchmark in each basin from a larger benchmark ensemble, the resulting spatial overview of model performance found through the BME approach is less conflated with flow variability. This results in BME values that are more strongly focused on the added value of using the model over alternative ways to predict the variable of interest. This strongly affects the conclusions one might draw about where a model is fit-for-purpose, and where improvements in model performance may be most readily achieved.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessThe impact of benchmark selection on spatial patterns of model evaluation metrics
Hydrological model evaluation is often performed with aggregated metrics such as the widely used Nash Sutcliffe Efficiency (NSE). The NSE is a skill score that can be interpreted as using the mean observed flow as a benchmark against which to compare model performance. However, this results in strong spatial patterns of scores that conflate model skill with flow variability, depending on how appropriate the benchmark model is for the catchment at hand. These patterns make it difficult to compare NSE scores across catchments which complicates model evaluation and comparison. This work addresses this limitation by using alternative formulations of the NSE that replace the mean observed flow term with various other benchmark simulations (called “benchmark efficiencies”, BME). BME values were calculated for an ensemble of 20 simple benchmarks, using hydrological model simulations from 960 basins in North America as a test case. The benchmarks vary from simple statistics calculated directly from the streamflow series to extremely simple models that try to capture the main outcomes of catchment behavior.Results show that alternative benchmarks show spatial patterns of model performance that differ from those of the NSE, due to differences in how well the individual benchmarks capture flow variability in different regions. Benchmarks that effectively capture flow variability in a given catchment result in a low BME score and are a more challenging test of model performance. As such, selecting the lowest BME score in each catchment can reduce the spatial patterns in model scores by ensuring that the model is always being compared to the benchmark that best captures the flow variability of the catchment. The highest NSE scores were all found in catchments with strongly seasonal flow regimes, but the highest BME scores came from a more even distribution of flow regimes. Indeed, several catchments with strongly seasonal flow regimes had NSE scores above 0.5 with negative corresponding BME scores. This indicates that failing to use appropriate benchmarks for BME calculations in catchments with a strongly seasonal flow regime can mask the fact that the model cannot beat simple benchmarks and may provide an overly optimistic assessment of model performance. By selecting the most appropriate benchmark in each basin from a larger benchmark ensemble, the resulting spatial overview of model performance found through the BME approach is less conflated with flow variability. This results in BME values that are more strongly focused on the added value of using the model over alternative ways to predict the variable of interest. This strongly affects the conclusions one might draw about where a model is fit-for-purpose, and where improvements in model performance may be most readily achieved.
- Open Access
- 7 February 2026
- Published by Wiley
A Model-Agnostic Representation of Prairie Pothole Hydrology: Enhancing Generality and Implementation Across Hydrological Models
Modelling streamflow in low-lying, flat, and pothole-dominated prairie or Arctic regions is challenging due to variable non-contributing areas that influence how runoff translates to streamflow.Several modelling approaches have been developed to represent these dynamics, but many 1) lump depressions and permit spill only after a fixed capacity is reached, 2) rely heavily on calibration, 3) are unsuitable for large basins, 4) do not account for non-pothole contributions, and/or 5) are not model-agnostic.Here we present HDSv2, a second-generation Hysteretic Depressional Storage (HDS) module that is open-source, model-agnostic, numerically robust, and grounded in long-established physical understanding of prairie potholes.HDSv2 represents dynamic contributing area and storage–discharge hysteresis, enabling realistic simulation of fill-and-spill behavior and cold-region processes.We couple HDSv2 with three hydrological and land-surface models of differing architectures: HYPE (Hydrological Predictions for the Environment), MESH (Modélisation Environnementale communautaire—Surface and Hydrology), and SUMMA (Structure for Unifying Multiple Modelling Alternatives), applied in the Smith Creek River Basin, Canada.Results show that HDSv2 improves numerical stability and process fidelity relative to the original HDS model, which exhibited instabilities affecting contributing-area simulation within HYPE.Across all host models, integrating HDSv2 produces more robust hydrographs than the original configurations and better reproduces observed relationships between depressional storage and contributing area. Although hydrograph improvements vary by host, additional performance metrics show consistent gains in both high and low flow conditions.These findings demonstrate that HDSv2 provides a transferable and scalable pathway for incorporating depressional-storage dynamics into diverse hydrological models and regions.
- 7 February 2026
- Published by Wiley
Open AccessA Model-Agnostic Representation of Prairie Pothole Hydrology: Enhancing Generality and Implementation Across Hydrological Models
Modelling streamflow in low-lying, flat, and pothole-dominated prairie or Arctic regions is challenging due to variable non-contributing areas that influence how runoff translates to streamflow.Several modelling approaches have been developed to represent these dynamics, but many 1) lump depressions and permit spill only after a fixed capacity is reached, 2) rely heavily on calibration, 3) are unsuitable for large basins, 4) do not account for non-pothole contributions, and/or 5) are not model-agnostic.Here we present HDSv2, a second-generation Hysteretic Depressional Storage (HDS) module that is open-source, model-agnostic, numerically robust, and grounded in long-established physical understanding of prairie potholes.HDSv2 represents dynamic contributing area and storage–discharge hysteresis, enabling realistic simulation of fill-and-spill behavior and cold-region processes.We couple HDSv2 with three hydrological and land-surface models of differing architectures: HYPE (Hydrological Predictions for the Environment), MESH (Modélisation Environnementale communautaire—Surface and Hydrology), and SUMMA (Structure for Unifying Multiple Modelling Alternatives), applied in the Smith Creek River Basin, Canada.Results show that HDSv2 improves numerical stability and process fidelity relative to the original HDS model, which exhibited instabilities affecting contributing-area simulation within HYPE.Across all host models, integrating HDSv2 produces more robust hydrographs than the original configurations and better reproduces observed relationships between depressional storage and contributing area. Although hydrograph improvements vary by host, additional performance metrics show consistent gains in both high and low flow conditions.These findings demonstrate that HDSv2 provides a transferable and scalable pathway for incorporating depressional-storage dynamics into diverse hydrological models and regions.
- Open Access
- 5 February 2026
- Published by Wiley
Simple models of topographically driven subsurface lateral flow: A review
Math_shortcuts Explicitly simulating topographically driven lateral flow processes is important to provide realistic simulations of global water, energy, and biogeochemical cycles. We present both analytical and numerical solutions of the storage-discharge dynamics of hillslopes. The analytical solutions include saturated flow dynamics for a rectangular plane of constant slope, and solutions that quantify relationships between hillslope shape and hillslope storage and hillslope outflow. The analytical solutions presented in this paper have three primary applications in modern hydrological and land models: (1) the solutions can be used to provide an independent check for the numerical implementation of saturated subsurface flow processes; (2) the solutions increase understanding of the storage-discharge behaviour of hillslopes; and (3) the solutions provide an exact and numerically efficient way to represent flow processes in hydrological and land models. The intent of this paper is to provide a synthesis on the early analytical work on topographically driven saturated flow and hence strengthen the basis for the future development of large-domain hydrological and land models.
- 5 February 2026
- Published by Wiley
Open AccessSimple models of topographically driven subsurface lateral flow: A review
Math_shortcuts Explicitly simulating topographically driven lateral flow processes is important to provide realistic simulations of global water, energy, and biogeochemical cycles. We present both analytical and numerical solutions of the storage-discharge dynamics of hillslopes. The analytical solutions include saturated flow dynamics for a rectangular plane of constant slope, and solutions that quantify relationships between hillslope shape and hillslope storage and hillslope outflow. The analytical solutions presented in this paper have three primary applications in modern hydrological and land models: (1) the solutions can be used to provide an independent check for the numerical implementation of saturated subsurface flow processes; (2) the solutions increase understanding of the storage-discharge behaviour of hillslopes; and (3) the solutions provide an exact and numerically efficient way to represent flow processes in hydrological and land models. The intent of this paper is to provide a synthesis on the early analytical work on topographically driven saturated flow and hence strengthen the basis for the future development of large-domain hydrological and land models.