Baofang Jin
Baofang Jin has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
- Fabing Su
Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190, China
2 shared publications - Jiajian Gao
Institute of Sustainability for Chemicals Energy and Environment (ISCE2), Agency for Science, Technology and Research (A*STAR), Singapore, Singapore
2 shared publications - Kangjun Wang
College of Chemical Engineering, Shenyang University of Chemical Technology, Shenyang, China
2 shared publications - Rui Ran
Key Laboratory of Advanced Materials of Ministry of Education of China, School of Materials Science and Engineering, Tsinghua University, Beijing 100084, China
2 shared publications - Xiaodong Wu
Tsinghua University
2 shared publications - Zhenguo Li
National Engineering Laboratory for Mobile Source Emission Control Technology, China Automotive Technology & Research Center Co., Ltd, Tianjin 300300, China
2 shared publications
Latest Publications
- 15 January 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (3) , 1809-1819
Design and Experimental Validation of a Miniature Vacuum Pressure Swing Adsorption System for High-Efficiency Biogas Upgrading
- 15 January 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (3) , 1809-1819
Design and Experimental Validation of a Miniature Vacuum Pressure Swing Adsorption System for High-Efficiency Biogas Upgrading
- Open Access
Enhanced the Catalytic Performance of Samarium and Cerium Co-Modified Mn-Based Oxide Catalyst for Soot Oxidation
Manganese-based oxides with good redox properties exhibit high soot oxidation activity. To further enhance their catalytic performance, introducing additional metal elements into manganese-based oxides is considered an effective approach. Herein, two rare earth elements (Sm and Ce)-modified MnOx catalysts were prepared by the co-precipitation method. The synthesized MnOx catalyst primarily consists of the Mn3O4 phase, with trace amounts of Mn5O8. The addition of Sm or Ce maintains the predominance of the Mn3O4 phase, increases the proportion of Mn5O8, and enhances the redox properties, thereby boosting the catalytic activity for NO and soot oxidation. Notably, the coexistence of Sm and Ce achieves optimal soot oxidation activity, with T10 reaching 306 °C. Comprehensive physicochemical characterization elucidates the underlying structure–performance relationships of these catalysts.
Open AccessEnhanced the Catalytic Performance of Samarium and Cerium Co-Modified Mn-Based Oxide Catalyst for Soot Oxidation
Manganese-based oxides with good redox properties exhibit high soot oxidation activity. To further enhance their catalytic performance, introducing additional metal elements into manganese-based oxides is considered an effective approach. Herein, two rare earth elements (Sm and Ce)-modified MnOx catalysts were prepared by the co-precipitation method. The synthesized MnOx catalyst primarily consists of the Mn3O4 phase, with trace amounts of Mn5O8. The addition of Sm or Ce maintains the predominance of the Mn3O4 phase, increases the proportion of Mn5O8, and enhances the redox properties, thereby boosting the catalytic activity for NO and soot oxidation. Notably, the coexistence of Sm and Ce achieves optimal soot oxidation activity, with T10 reaching 306 °C. Comprehensive physicochemical characterization elucidates the underlying structure–performance relationships of these catalysts.
- 13 October 2024
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 63 (42) , 17778-17789
Deciphering the Promoting Effect of Zn on CuO for Dimethyldichlorosilane Production via the Rochow-Müller Reaction
- 13 October 2024
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 63 (42) , 17778-17789
Deciphering the Promoting Effect of Zn on CuO for Dimethyldichlorosilane Production via the Rochow-Müller Reaction
- Open Access
Modification of SmMn2O5 Catalyst with Silver for Soot Oxidation: Ag Loading and Metal–Support Interactions
A series of Ag-modified manganese-mullite (SmMn2O5) catalysts with different Ag contents (1, 3, and 6 wt.%) were prepared via a citric acid sol–gel method for catalytic soot oxidation. The catalysts were characterized by powder X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET), Raman spectroscopy, transmission electron microscopy (TEM), high-resolution transmission electron microscopy analysis (HRTEM), X-ray photoelectron spectroscopy (XPS), and H2 temperature-programmed reduction (H2-TPR). The soot oxidation activity of the mullite was significantly promoted by the addition of silver and affected by the loading amount of the metal. Herein, the influences of silver loading on the metal size distribution and its interactions with the mullite were studied. Based on these characterizations, a possible soot oxidation reaction mechanism was proposed for silver-modified SmMn2O5.
Open AccessModification of SmMn2O5 Catalyst with Silver for Soot Oxidation: Ag Loading and Metal–Support Interactions
A series of Ag-modified manganese-mullite (SmMn2O5) catalysts with different Ag contents (1, 3, and 6 wt.%) were prepared via a citric acid sol–gel method for catalytic soot oxidation. The catalysts were characterized by powder X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET), Raman spectroscopy, transmission electron microscopy (TEM), high-resolution transmission electron microscopy analysis (HRTEM), X-ray photoelectron spectroscopy (XPS), and H2 temperature-programmed reduction (H2-TPR). The soot oxidation activity of the mullite was significantly promoted by the addition of silver and affected by the loading amount of the metal. Herein, the influences of silver loading on the metal size distribution and its interactions with the mullite were studied. Based on these characterizations, a possible soot oxidation reaction mechanism was proposed for silver-modified SmMn2O5.
- Open Access
Co-Precipitated Mn0.15Ce0.85O2−δ Catalysts for NO Oxidation: Manganese Precursors and Mn-Ce Interactions
Two Mn0.15Ce0.85O2−δ mixed oxides were synthesized by a co-precipitation method using Mn(NO3)2 and KMnO4 as the manganese precursors, respectively. Structural analyses by X-ray powder diffraction and Raman spectroscopy reveal the formation of MnOx-CeO2 solid solutions. The Mn0.15Ce0.85O2−δ catalyst prepared from the high-valent manganese precursor exhibits higher activity for the catalytic oxidation of NO. The advantage of KMnO4 is related to the improved redox property of the catalyst as supported by H2 temperature-programmed reduction (TPR) and O2 temperature-programmed desorption (TPD). The Mn-Ce interactions create more Mn4+, Ce3+ and oxygen vacancies on the KMnO4-synthesized mixed oxides based on the Raman and X-ray photoelectron spectra (XPS).
Open AccessCo-Precipitated Mn0.15Ce0.85O2−δ Catalysts for NO Oxidation: Manganese Precursors and Mn-Ce Interactions
Two Mn0.15Ce0.85O2−δ mixed oxides were synthesized by a co-precipitation method using Mn(NO3)2 and KMnO4 as the manganese precursors, respectively. Structural analyses by X-ray powder diffraction and Raman spectroscopy reveal the formation of MnOx-CeO2 solid solutions. The Mn0.15Ce0.85O2−δ catalyst prepared from the high-valent manganese precursor exhibits higher activity for the catalytic oxidation of NO. The advantage of KMnO4 is related to the improved redox property of the catalyst as supported by H2 temperature-programmed reduction (TPR) and O2 temperature-programmed desorption (TPD). The Mn-Ce interactions create more Mn4+, Ce3+ and oxygen vacancies on the KMnO4-synthesized mixed oxides based on the Raman and X-ray photoelectron spectra (XPS).
- Open Access
Abundant Oxygen Vacancies Induced by the Mechanochemical Process Boost the Low-Temperature Catalytic Performance of MnO2 in NH3-SCR
Manganese oxides (MnOx) have attracted particular attention in the selective catalytic reduction of NOx with NH3 (NH3-SCR) because of their excellent low-temperature activity. Herein, we prepared a highly efficient MnO2 (MnO2-M) catalyst through a facile ball milling-assisted redox strategy. MnO2-M shows a 90% NOx conversion in a wide operating temperature window of 75–200 °C under a gas hourly space velocity of 40,000 h−1, which is much more active than the MnO2 catalyst prepared by the redox method without the ball-milling process. Moreover, MnO2-M exhibits better H2O and SO2 resistance. The enhanced catalytic properties of MnO2-M originated from the high surface area, abundant oxygen vacancies, more acid sites, and higher Mn4+ content induced by the ball-milling process. In situ DRIFTS studies probed the reaction intermediates, and the SCR reaction was deduced to proceed via the typical Eley–Rideal mechanism. This work provides a facile method to enhance the catalytic performance of Mn-based catalysts for low-temperature denitrification and deep insights into the NH3-SCR reaction process.
Open AccessAbundant Oxygen Vacancies Induced by the Mechanochemical Process Boost the Low-Temperature Catalytic Performance of MnO2 in NH3-SCR
Manganese oxides (MnOx) have attracted particular attention in the selective catalytic reduction of NOx with NH3 (NH3-SCR) because of their excellent low-temperature activity. Herein, we prepared a highly efficient MnO2 (MnO2-M) catalyst through a facile ball milling-assisted redox strategy. MnO2-M shows a 90% NOx conversion in a wide operating temperature window of 75–200 °C under a gas hourly space velocity of 40,000 h−1, which is much more active than the MnO2 catalyst prepared by the redox method without the ball-milling process. Moreover, MnO2-M exhibits better H2O and SO2 resistance. The enhanced catalytic properties of MnO2-M originated from the high surface area, abundant oxygen vacancies, more acid sites, and higher Mn4+ content induced by the ball-milling process. In situ DRIFTS studies probed the reaction intermediates, and the SCR reaction was deduced to proceed via the typical Eley–Rideal mechanism. This work provides a facile method to enhance the catalytic performance of Mn-based catalysts for low-temperature denitrification and deep insights into the NH3-SCR reaction process.