Guoying Bai
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Guoying Bai has a total of 44 co-authors. Here are the top co-authors by number of shared publications:
Dong Gao
Key Laboratory of Hebei Province for Molecular Biophysics, Institute of Biophysics, School of Health Science and Bio-medical Engineering, Hebei University of Technology
3 shared publicationsJinhao Hu
Tianjin Key Laboratory of Materials Laminating Fabrication and Interface Control Technology School of Materials Science and Engineering Hebei University of Technology Tianjin 300401 P. R. China
3 shared publications- Dong Gao
Key Laboratory of Hebei Province for Molecular Biophysics, Institute of Biophysics, Hebei University of Technology, Tianjin 300401, P. R. China
2 shared publications Haiyan Zhang
Tianjin Key Laboratory of Materials Laminating Fabrication and Interface Control Technology, School of Materials Science and Engineering, Hebei University of Technology, Tianjin, P. R. China
2 shared publicationsHang Li
“The Belt and Road Initiative” Advanced Materials International Joint Research Center of Hebei Province, School of Materials Science and Engineering
2 shared publications- Jianjun Wang
Interdisciplinary Research Center for Advanced Materials Technical Institute of Physics and Chemistry Chinese Academy of Sciences Beijing China
2 shared publications
Latest Publications
- Open Access
- 9 October 2025
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 122 (41)
Freezing enhances CO 2 mineralization in Ca 2+ -containing solutions
Natural carbon sinks and the factors influencing them are critical to the global carbon budget. Here, we identify the freezing process as an important factor. It greatly contributes to natural carbon sinks by enhancing atmospheric CO 2 sequestration/mineralization in mineral ion-rich aqueous systems, which is demonstrated by freezing the solutions of Ca(OH) 2 , binary NaCl–CaCl 2 solutions, and artificial seawater. The acceleration is caused by the impacts of freezing on nucleation and growth processes of CaCO 3 crystals. Freezing accelerates nucleation by concentrating reactants within ice crystal boundaries, increasing supersaturation, and thus lowering the nucleation energy barrier. At the post–thaw stage where nuclei already form and reactant concentration is decreased, the crystals undergo the barrier-free growth process. Our findings reveal the freezing-enhanced CO 2 sequestration that is omitted in the current global carbon budget models and signal an urgent need to integrate cryogenic mineralization into climate predictions.
- 9 October 2025
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 122 (41)
Open AccessFreezing enhances CO 2 mineralization in Ca 2+ -containing solutions
Natural carbon sinks and the factors influencing them are critical to the global carbon budget. Here, we identify the freezing process as an important factor. It greatly contributes to natural carbon sinks by enhancing atmospheric CO 2 sequestration/mineralization in mineral ion-rich aqueous systems, which is demonstrated by freezing the solutions of Ca(OH) 2 , binary NaCl–CaCl 2 solutions, and artificial seawater. The acceleration is caused by the impacts of freezing on nucleation and growth processes of CaCO 3 crystals. Freezing accelerates nucleation by concentrating reactants within ice crystal boundaries, increasing supersaturation, and thus lowering the nucleation energy barrier. At the post–thaw stage where nuclei already form and reactant concentration is decreased, the crystals undergo the barrier-free growth process. Our findings reveal the freezing-enhanced CO 2 sequestration that is omitted in the current global carbon budget models and signal an urgent need to integrate cryogenic mineralization into climate predictions.
- 3 September 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 16 (36) , 9488-9495
Ice Nucleation Regulation by Nanoscale Surface Topography
Heterogeneous ice nucleation, triggered by surfaces, profoundly impacts climate systems, biological processes, and technological applications. Classical nucleation theory (CNT) predicts that with curvature radii decreasing within 1 order of magnitude of the critical nucleus radius, convex surfaces should suppress nucleation and concave surfaces should promote nucleation; however, such regularity has not been observed explicitly in experiments, and there are even conflicting results. Here, we resolve this long-standing controversy by providing the first experimental evidence about the bidirectional regulation of ice nucleation from both liquid and vapor phases through precisely engineered convex (nanosphere) and concave (nanopore) surfaces. Systematic experiments reveal size-dependent trends: as curvature radii decrease at the critical nucleus scale, ice nucleation temperatures and rates decrease on convex but increase on concave surfaces, directly linked to opposing nucleation free energy barrier variations that align with CNT predictions. This work bridges CNT's predictions for surface topography with practical ice-control engineering.
- 3 September 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 16 (36) , 9488-9495
Ice Nucleation Regulation by Nanoscale Surface Topography
Heterogeneous ice nucleation, triggered by surfaces, profoundly impacts climate systems, biological processes, and technological applications. Classical nucleation theory (CNT) predicts that with curvature radii decreasing within 1 order of magnitude of the critical nucleus radius, convex surfaces should suppress nucleation and concave surfaces should promote nucleation; however, such regularity has not been observed explicitly in experiments, and there are even conflicting results. Here, we resolve this long-standing controversy by providing the first experimental evidence about the bidirectional regulation of ice nucleation from both liquid and vapor phases through precisely engineered convex (nanosphere) and concave (nanopore) surfaces. Systematic experiments reveal size-dependent trends: as curvature radii decrease at the critical nucleus scale, ice nucleation temperatures and rates decrease on convex but increase on concave surfaces, directly linked to opposing nucleation free energy barrier variations that align with CNT predictions. This work bridges CNT's predictions for surface topography with practical ice-control engineering.
- 17 August 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (8)
Transparent Anti‐Icing Coating via Synergistic Nanoscale Interfacial Engineering and Spectral‐Selective Photothermy
Passive anti‐icing should have been an idea strategy to prevent ice accumulation on cold surface, yet often proves unsatisfactory or even counterproductive in effect due to the fundamental challenge of overcoming the thermodynamic driving force for ice nucleation during temperature decreasing and the empirical nature of conventional design approaches. While photothermy offers a cost‐effective and eco‐friendly active anti‐icing solution, currently used photothermal materials face a trade‐off between efficiency promotion and transparency maintenance stemming from their broadband‐solar absorption characteristics. Here, a hierarchical anti‐icing system is developed combining: 1) an unconventional and foolproof passive strategy that elevates the threshold of thermodynamic driving force required by ice nucleation, i.e., ice nucleation free energy barrier, through nanoscale (critical ice nucleus dimensions) interfacial engineering, and 2) an active photothermal strategy that employs spectral‐selective materials with visible‐light transparency. This synergistic strategy enables water on the engineered transparent coatings to remain unfrozen for at least 1 h without solar illumination and enduringly unfrozen under irradiator, at temperature conservatively down to −25 °C and aggressively down to −30 °C. The simple, effective, universal method is promising to bring superior transparent anti‐icing coatings by further reducing the scale for interfacial engineering and optimizing material types.
- 17 August 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (8)
Transparent Anti‐Icing Coating via Synergistic Nanoscale Interfacial Engineering and Spectral‐Selective Photothermy
Passive anti‐icing should have been an idea strategy to prevent ice accumulation on cold surface, yet often proves unsatisfactory or even counterproductive in effect due to the fundamental challenge of overcoming the thermodynamic driving force for ice nucleation during temperature decreasing and the empirical nature of conventional design approaches. While photothermy offers a cost‐effective and eco‐friendly active anti‐icing solution, currently used photothermal materials face a trade‐off between efficiency promotion and transparency maintenance stemming from their broadband‐solar absorption characteristics. Here, a hierarchical anti‐icing system is developed combining: 1) an unconventional and foolproof passive strategy that elevates the threshold of thermodynamic driving force required by ice nucleation, i.e., ice nucleation free energy barrier, through nanoscale (critical ice nucleus dimensions) interfacial engineering, and 2) an active photothermal strategy that employs spectral‐selective materials with visible‐light transparency. This synergistic strategy enables water on the engineered transparent coatings to remain unfrozen for at least 1 h without solar illumination and enduringly unfrozen under irradiator, at temperature conservatively down to −25 °C and aggressively down to −30 °C. The simple, effective, universal method is promising to bring superior transparent anti‐icing coatings by further reducing the scale for interfacial engineering and optimizing material types.
- 24 January 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (5) , 2017-2026
Mechanism of Water Freezing in Solutions: Solutes Affect the Formation of Critical Ice Nuclei
The microscopic mechanisms by which solutes modulate water freezing are fundamental for controlling the freezing of various environmental and cryobiotic systems. Although our understanding of the initiation mechanisms of pure water freezing is becoming clearer, the microscopic pictures regarding ice nucleation in complex systems such as solutions still rely on theory assumption and empirical formulation. Here, we experimentally demonstrate that solutes modulate water freezing through affecting critical ice nucleus formation. Upon addition of a solute, which can be quantified by the single parameter of water activity (a w), critical ice nuclei are more difficult to form because the solute increases the critical ice nucleus radius (r*) by decreasing a w. The value of r* that can be applied to solution systems depends firmly on not only the nucleation temperature but also a w. Furthermore, using molecular dynamics simulations, we give a microscopic picture of ice nucleus formation in solution and explain the underlying reasons for solute-induced changes in r*.
- 24 January 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (5) , 2017-2026
Mechanism of Water Freezing in Solutions: Solutes Affect the Formation of Critical Ice Nuclei
The microscopic mechanisms by which solutes modulate water freezing are fundamental for controlling the freezing of various environmental and cryobiotic systems. Although our understanding of the initiation mechanisms of pure water freezing is becoming clearer, the microscopic pictures regarding ice nucleation in complex systems such as solutions still rely on theory assumption and empirical formulation. Here, we experimentally demonstrate that solutes modulate water freezing through affecting critical ice nucleus formation. Upon addition of a solute, which can be quantified by the single parameter of water activity (a w), critical ice nuclei are more difficult to form because the solute increases the critical ice nucleus radius (r*) by decreasing a w. The value of r* that can be applied to solution systems depends firmly on not only the nucleation temperature but also a w. Furthermore, using molecular dynamics simulations, we give a microscopic picture of ice nucleus formation in solution and explain the underlying reasons for solute-induced changes in r*.
- Open Access
- 11 April 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-9
Controlled condensation by liquid contact-induced adaptations of molecular conformations in self-assembled monolayers
Surface condensation control strategies are crucial but commonly require relatively tedious, time-consuming, and expensive techniques for surface-chemical and topographical engineering. Here we report a strategy to alter surface condensation behavior without resorting to any molecule-type or topographical transmutations. After ultrafast contact of liquids with and removal from surfaces, the condensation rate and density of water droplets on the surfaces decrease, the extent of which is positively correlated with the polarity of the liquid and the duration of contact. The liquid contact-induced condensation rate/density decrease (LCICD) can be attributed to the decrease of nucleation site density resulted from the liquid contact-induced adaption of surface molecular conformation. Based on this, we find that LCICD is applicable to various surfaces, on condition that there are flexible segments capable of shielding at least part of nucleation sites through changing the conformation under liquid contact induction. Leveraging the LCICD effect, we achieve erasable information storage on diverse substrates. Furthermore, our strategy holds promise for controlling condensation of other substances since LCICD is not specific to the water condensation process.
- 11 April 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-9
Open AccessControlled condensation by liquid contact-induced adaptations of molecular conformations in self-assembled monolayers
Surface condensation control strategies are crucial but commonly require relatively tedious, time-consuming, and expensive techniques for surface-chemical and topographical engineering. Here we report a strategy to alter surface condensation behavior without resorting to any molecule-type or topographical transmutations. After ultrafast contact of liquids with and removal from surfaces, the condensation rate and density of water droplets on the surfaces decrease, the extent of which is positively correlated with the polarity of the liquid and the duration of contact. The liquid contact-induced condensation rate/density decrease (LCICD) can be attributed to the decrease of nucleation site density resulted from the liquid contact-induced adaption of surface molecular conformation. Based on this, we find that LCICD is applicable to various surfaces, on condition that there are flexible segments capable of shielding at least part of nucleation sites through changing the conformation under liquid contact induction. Leveraging the LCICD effect, we achieve erasable information storage on diverse substrates. Furthermore, our strategy holds promise for controlling condensation of other substances since LCICD is not specific to the water condensation process.
Reversible Stacking and Delamination‐Regulation of MXene via Controlled Freezing
MXene's configuration, whether it is aggregated or dispersed in a monolayer, determines the specific application areas and even greatly influences the intrinsic properties of MXene. However, how to desirably control MXene's configuration is challenging. Here, a simple, additive‐free, chemical reaction‐free, and scalable strategy to optionally and reversibly regulate MXene's ordered stacking and delamination of MXene aggregates (AM) is reported. Just by controlled freezing of MXene aqueous dispersions, the aggregation percentage, delamination percentage, and interlayer spacing of AM can be finely tuned. Experimental results reveal that the freezing‐induced aggregation and delamination effects can be explained by the squeezing action of growing ice grains on the MXene excluded/concentrated between ice grains and the expanding action caused by the ice formation between AM lamellae, respectively. The dominance between them depends on the freezing parameter‐influenced ice nucleation sites, numbers, and ice grain sizes. This work not only contributes to the preparation, storage, and practical applications of MXene, but also opens a new and green avenue for controlling materials’ assembly structures.
Reversible Stacking and Delamination‐Regulation of MXene via Controlled Freezing
MXene's configuration, whether it is aggregated or dispersed in a monolayer, determines the specific application areas and even greatly influences the intrinsic properties of MXene. However, how to desirably control MXene's configuration is challenging. Here, a simple, additive‐free, chemical reaction‐free, and scalable strategy to optionally and reversibly regulate MXene's ordered stacking and delamination of MXene aggregates (AM) is reported. Just by controlled freezing of MXene aqueous dispersions, the aggregation percentage, delamination percentage, and interlayer spacing of AM can be finely tuned. Experimental results reveal that the freezing‐induced aggregation and delamination effects can be explained by the squeezing action of growing ice grains on the MXene excluded/concentrated between ice grains and the expanding action caused by the ice formation between AM lamellae, respectively. The dominance between them depends on the freezing parameter‐influenced ice nucleation sites, numbers, and ice grain sizes. This work not only contributes to the preparation, storage, and practical applications of MXene, but also opens a new and green avenue for controlling materials’ assembly structures.
- 21 February 2024
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 40 (9) , 4592-4600
Graphene Oxide Inhibits Calcium Carbonate Nucleation
Formation of minerals such as calcium carbonate often causes energy consumption and even safety risk increase due to the hindrance on heat/mass transfer. However, the current antiscalants are not efficient enough because of the poor understanding of the scale inhibition mechanisms. Here, we report an ultrahigh-performance antiscalant, graphene oxide (GO), which exhibits an outstanding nucleation inhibition effect far better than the current state-of-the-art antiscalants even on a subppm dosage. Our experiments reveal that the superior nucleation inhibition effect of GO is attributed to its limiting effect on the nucleation kinetics of ions and its ability to increase the nucleation barrier of calcium carbonate by altering the normal pathway of calcium carbonate polymorph formation. Further analysis indicates that the ion-limiting effect and the polymorph control ability of GO may stem from its oxygen functional group-rich surface chemistry and two-dimensional (2D) planar features, which endow GO with a Ca2+ binding ability and additional steric hindrance for CO32- diffusion, respectively.
- 21 February 2024
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 40 (9) , 4592-4600
Graphene Oxide Inhibits Calcium Carbonate Nucleation
Formation of minerals such as calcium carbonate often causes energy consumption and even safety risk increase due to the hindrance on heat/mass transfer. However, the current antiscalants are not efficient enough because of the poor understanding of the scale inhibition mechanisms. Here, we report an ultrahigh-performance antiscalant, graphene oxide (GO), which exhibits an outstanding nucleation inhibition effect far better than the current state-of-the-art antiscalants even on a subppm dosage. Our experiments reveal that the superior nucleation inhibition effect of GO is attributed to its limiting effect on the nucleation kinetics of ions and its ability to increase the nucleation barrier of calcium carbonate by altering the normal pathway of calcium carbonate polymorph formation. Further analysis indicates that the ion-limiting effect and the polymorph control ability of GO may stem from its oxygen functional group-rich surface chemistry and two-dimensional (2D) planar features, which endow GO with a Ca2+ binding ability and additional steric hindrance for CO32- diffusion, respectively.
- Open Access
- 2 January 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-11
Probing the critical nucleus size in tetrahydrofuran clathrate hydrate formation using surface-anchored nanoparticles
Controlling the formation of clathrate hydrates is crucial for advancing hydrate-based technologies. However, the microscopic mechanism underlying clathrate hydrate formation through nucleation remains poorly elucidated. Specifically, the critical nucleus, theorized as a pivotal step in nucleation, lacks empirical validation. Here, we report uniform nanoparticles, e.g., graphene oxide (GO) nanosheets and gold or silver nanocubes with controlled sizes, as nanoprobes to experimentally measure the size of the critical nucleus of tetrahydrofuran (THF) clathrate hydrate formation. The capability of the nanoparticles in facilitating THF clathrate hydrate nucleation displays generally an abrupt change at a nanoparticle-size-determined specific supercooling. It is revealed that the free-energy barrier shows an abrupt change when the nanoparticles have an approximately the same size as that of the critical nucleus. Thus, it is inferred that THF clathrate hydrate nucleation involves the creation of a critical nucleus with its size being inversely proportional to the supercooling. By proving the existence and determining the supercooling-dependent size of the critical nucleus of the THF clathrate hydrates, this work brings insights in the microscopic pictures of the clathrate hydrate nucleation.
- 2 January 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-11
Open AccessProbing the critical nucleus size in tetrahydrofuran clathrate hydrate formation using surface-anchored nanoparticles
Controlling the formation of clathrate hydrates is crucial for advancing hydrate-based technologies. However, the microscopic mechanism underlying clathrate hydrate formation through nucleation remains poorly elucidated. Specifically, the critical nucleus, theorized as a pivotal step in nucleation, lacks empirical validation. Here, we report uniform nanoparticles, e.g., graphene oxide (GO) nanosheets and gold or silver nanocubes with controlled sizes, as nanoprobes to experimentally measure the size of the critical nucleus of tetrahydrofuran (THF) clathrate hydrate formation. The capability of the nanoparticles in facilitating THF clathrate hydrate nucleation displays generally an abrupt change at a nanoparticle-size-determined specific supercooling. It is revealed that the free-energy barrier shows an abrupt change when the nanoparticles have an approximately the same size as that of the critical nucleus. Thus, it is inferred that THF clathrate hydrate nucleation involves the creation of a critical nucleus with its size being inversely proportional to the supercooling. By proving the existence and determining the supercooling-dependent size of the critical nucleus of the THF clathrate hydrates, this work brings insights in the microscopic pictures of the clathrate hydrate nucleation.
- 9 August 2023
- Published by Elsevier in Applied Surface Science
- Vol. 639
Controlling CaCO3 nucleation with halogen-terminated self-assembled monolayers
- 9 August 2023
- Published by Elsevier in Applied Surface Science
- Vol. 639
Controlling CaCO3 nucleation with halogen-terminated self-assembled monolayers
- Open Access
- 14 March 2023
- Published by Elsevier in STAR Protocols
- Vol. 4 (2) , 102160
Protocol for cryopreservation of red blood cells that controls ice crystal formation by fulvic acid
- 14 March 2023
- Published by Elsevier in STAR Protocols
- Vol. 4 (2) , 102160
Open AccessProtocol for cryopreservation of red blood cells that controls ice crystal formation by fulvic acid