AGAnna Maria Gargiulo

Anna Maria Gargiulo

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Anna Maria Gargiulo has a total of 63 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Deep-Learning-Based Optical Navigation Framework Using Direction of Motion Measurements

    by Anna Maria Gargiulo, Shyam Bhaskaran, Nicholas Bradley, Andrew T. Vaughan, Daniel P. Lubey, Declan M. Mages, Simone Andolfo, Maria Antonietta Marsella, Antonio Genova

    Optical navigation plays a critical role in enabling challenging operations near small bodies. Existing techniques for processing optical data often depend on surface-related information, such as geological feature catalogs or shape models, which are limited by scale variations and low resolution of onboard datasets. To address these limitations, this study proposes a visual odometry-inspired method that uses motion direction observables extracted from the analysis of image pairs. These observables are used to constrain the spacecraft’s trajectory through a least-squares batch filtering approach. Leveraging deep learning models to reliably detect and match common features in partially overlapping images acquired at successive epochs, the proposed framework enables accurate spacecraft localization in the inertial reference frame. A comprehensive validation pipeline was developed to evaluate the network’s performance on datasets generated under varying illumination conditions and orbital configurations, demonstrating robustness in identifying correspondences between keypoints. This process supports the precise computation of the spacecraft’s estimated direction of motion. Numerical simulations in a synthetic environment, modeled on mission scenarios involving the Moon and the asteroid Vesta, provide an initial assessment of the achievable accuracy of the navigation solution and demonstrate its robustness to dynamical errors and camera pointing uncertainties representative of real mission conditions.

  • Open Access

    Three-Dimensional Interior Inversion of Icy Moons from Gravity, Topography, and Tidal Modeling

    by Gabriele Boccacci, Martina Ciambellini, Anna Maria Gargiulo, Antonio Genova

    Introduction: The characterization of icy moon interiors is essential for assessing the physical conditions of their subsurface oceans and their potential habitability. Icy moons represent key targets because of their potential active geology, evidence for internal oceans, and relevance to ongoing and future planetary missions. Constraining their internal structure requires estimates of the properties and geometry of the rocky core, ocean, and ice shell.Mass and low-degree gravity coefficients derived from spacecraft tracking data provide constraints on the bulk distribution of mass and on the total thickness of the hydrosphere. However, these quantities are not sufficient to independently determine the thicknesses and properties of the ice shell and subsurface ocean. The tidal Love number k₂, which depends on the global viscoelastic response of the body, provides an additional constraint on the rheological properties of the internal layers. Lateral variations in ice-shell thickness can be investigated using the high-degree components of the topography, which are sensitive to shallow and short-wavelength structures, together with an assumed compensation mechanism at the ice-ocean interface.This study applies a Bayesian inversion algorithm based on a Markov Chain Monte Carlo (MCMC) method [1] to combine geophysical constraints and estimate the radii, densities, rheological properties, shell thickness, and synthetic gravity field of Enceladus and Europa. The goal is to develop a generalized framework for the three-dimensional characterization of icy moon interiors.Modeling: Interior structure inversions of icy moons are commonly based on one-dimensional radial models [2], which are well suited to investigate the global-scale properties of the internal layers, including their radii, densities, and rheological parameters. However, this approach does not exploit geophysical measurements that contain information on lateral variations, such as gravity and topography at short and intermediate wavelengths. To include these additional constraints, this study adopts an enhanced interior model that accounts for the shape of the surface and uses the gravity–topography relationship to indirectly constrain lateral variations in the ice shell and the ice–ocean interface.This extension requires assumptions on the degree and mechanism of internal compensation. At long wavelengths, the gravity and topography of synchronously rotating icy moons are expected to be dominated by the hydrostatic response to rotation and tidal forcing, with only small deviations from hydrostatic equilibrium. This component is represented by a set of concentric triaxial ellipsoids, whose semiaxes are computed from the rotation period, reference layer radii, and densities by imposing equipotential conditions at the endpoints of the principal axes, following the minimization algorithm proposed by [3]. The remaining short-wavelength component is treated as non-hydrostatic and is associated with shallow sources within the ice shell. As a preliminary analysis, this non-hydrostatic contribution is modeled as the result of the viscoelastic response of the icy shell and of compensation at the ice–ocean interface.The ice shell is therefore represented as the sum of a hydrostatic reference figure and a non-hydrostatic contribution associated with surface and basal topography. The latter represents lateral variations in shell thickness and is linked to the gravity field through a degree-dependent admittance model. This formulation allows the inversion to retain the efficiency of a layered radial description for the global interior while incorporating lateral information from gravity and topography to constrain the three-dimensional structure of the outer shell. Results: We present a Bayesian inversion framework for the interior structure of icy moons based on a MCMC approach. The inversion uses the planetary mass and low-degree gravity field as primary geophysical constraints, together with interior parameters consistent with available observational bounds and accuracies based on legacy exploration missions. Since the tidal Love numbers of icy moons are not yet sufficiently constrained by observations, k₂ and h₂ are not imposed as target quantities. Instead, they are treated as model predictions derived from the ensemble of accepted interior structures.The interior models are generated by sampling the mean radii, densities, and rheological properties of the core, ocean, and ice shell. For each model, the hydrostatic shape of the internal interfaces is computed using a fourth-order formulation, while the ice-shell bottom topography is inferred from the observed surface topography and model parameters by imposing a compensation mechanism at the ice-ocean interface. The resulting three-dimensional shell-thickness distributions are used to compute the associated gravity field, which is included as a target observable in the inversion.For each accepted model, the degree-2 tidal Love numbers k₂ and h₂ are computed with PyALMA [4], which provides the viscoelastic tidal response of multilayer planetary interiors. Additional calculations with LOV3D [5] are used to evaluate the effect of lateral heterogeneity and compressibility on the tidal response, including whether shell-thickness variations inferred from gravity and topography produce measurable perturbations in k₂ and h₂. This comparison quantifies whether the tidal response can be interpreted using one-dimensional interior models or whether three-dimensional structure introduces non-negligible corrections.The inversion provides posterior distributions for the mean radii, densities, and rheological properties of the internal layers, together with maps of ice-shell thickness and their associated uncertainties. Rather than fitting observed tidal parameters, the study predicts the expected ranges of k₂ and h₂ and...

  • Open Access

    Bayesian inversion of Io's interior: self-consistent rheology from Juno gravity data and tidal dissipation

    by Matteo Paris, Alessandro Mura, Antonio Genova, Francesca Zambon, Federico Tosi, Anna Maria Gargiulo, Martina Ciambellini, Gabriele Boccacci, Scott Bolton, Andrea Cicchetti, et al.

    Introduction: Jupiter's moon Io, the most volcanically active body in the Solar System [1], exhibits intense internal heating driven by tidal dissipation [2]. While tidal friction is widely accepted as the primary mechanism powering this activity, the spatial distribution and depth of heating generation remain unresolved. Deriving Io's mantle material properties [3] requires the integration of its dynamic response, specifically the degree-2 Love number k2 and the gravity coefficients C20 and C22, which jointly preserve information on the anelastic deformation and the internal mass distribution. Geophysical Constraints: Io's internal structure constraints are derived from the latest geophysical datasets, adopting a planetary mass of (8.932±0.010)×1022 kg [4]. Rather than relying on the derived moment of inertia, the model directly incorporates static gravitational harmonics refined by the Juno mission [5]: C20=(-1834.6±1.5)×10-6 and C22= (549.6±0.3)×10-6. Anelastic response and internal dissipation are quantified through the complex degree-2 Love number k2, for which recent Juno-Galileo analyses yield Re(k2)=0.125±0.047 and Im(k2)=-0.0109±0.0054 [5]. Methodology: Interior models are inverted using a Bayesian MCMC framework [6, 7]. To ensure robust parameter space sampling and mitigate initial condition dependence, we employ 15 independent chains, each yielding 250,000 accepted models. Following a 50,000-model burn-in period per chain, the converged samples are combined into a final posterior distribution of 3,000,000 models. Io is represented as a four-layer body comprising a fluid core, viscoelastic lower and upper mantle, and an elastic crust. Mantle rheology follows an Andrade formulation with a fixed frequency exponent α=0.3, while the compliance parameter β, layer thicknesses, and densities are treated as free variables. The specific latent heat of fusion (L) of the upper mantle is included as a free parameter to evaluate thermodynamic uncertainties in melt production. To account for deviations from hydrostatic equilibrium, non-hydrostatic gravity contributions (C20nh, C22nh) are introduced as free parameters [5]. Observed gravity coefficients are thus modeled as the sum of these non-hydrostatic terms and the hydrostatic components derived from internal interface shapes using a fourth-order formulation [8]. The complex degree-2 Love number k2 is computed via an adapted version of the PyALMA code [9], incorporating a self-consistent thermo-viscoelastic loop [10, 11]. For each sampled configuration, radial tidal dissipation profiles are coupled with magmatic transport equations [12]. Upper mantle rheological properties, such as viscosity, shear modulus, and the Andrade parameter β, are iteratively updated based on the local melt fraction Φ(r) until thermal and mechanical equilibrium is reached [10, 11]. This approach enables the determination of the maximum melt fraction (Φmax) within the upper mantle to assess the stability of a "magmatic sponge" configuration against the formation of a global magma ocean [13, 14, 15]. Longitudinal libration amplitude is computed for each accepted model to ensure consistency with no magma ocean models [5, 16]. Inversion Results: Posterior distributions for layer thicknesses, densities, and mantle rheological properties are recovered through a comprehensive exploration of the parameter space (Figure 1). The accurate recovery of the target geophysical observables, including Io's mass, the static gravity harmonics, and both components of the complex Love number k2 (Figure 2), alongside the inversion of the non-hydrostatic gravity contributions (Figure 3), combined with thermodynamic equilibrium requirements, substantially reduces the range of admissible interior configurations. The resulting posterior distribution of Φmax is characterized by a median value of 0.080; the upper bound of the 95.5% credible interval remains below the rheologically critical threshold of 0.20 [13], demonstrating that partial melt is structurally retained within a solid rock matrix rather than coalescing into a uniform liquid layer. These findings provide strong evidence against the existence of a global, fully liquid magma ocean, supporting instead a stable "magmatic sponge" configuration [13, 15]. The accepted models yield a predicted longitudinal libration amplitude of 263.9-19.4+18.9 m. This result is consistent with independent estimates reported in the literature [5, 16]. This methodology establishes a framework for rigorously constraining Io’s interior dynamics through the joint inversion of Juno gravity and complex k2 within a fully self-consistent thermo-viscoelastic–melt coupling.Figure 1: MCMC posterior distributions for the retrieved rheological and structural parameters. The panels illustrate the probability densities for shear moduli, viscosities, and Andrade compliance parameters (β) for the crust and mantle layers, alongside the specific latent heat of fusion (L) for the upper mantle.Figure 2: MCMC posterior distributions for the target geophysical observables: Io's mass, the static gravitational harmonic coefficients C20 and C22, and the real and imaginary components of the complex degree-2 Love number k2 [4,5]. Observational constraints are shown in black with their 1-σ uncertainties. The 2D marginal distributions are displayed as contour levels corresponding to the 16th and 84th percentiles (red).Figure 3: MCMC posterior distributions for the non-hydrostatic gravitational harmonic coefficients C20nh and C22nh.Acknowledgments: We thank Agenzia Spaziale Italiana (ASI) for the support of the JIRAM contribution to the Juno mission; this work is supported by the ASI–INAF Addendum n. 2016-23-H.3-2023 to grant 2016-23 H.0. AG acknowledges funding from the Italian Space Agency (ASI) grant n. 2023-60-HH.0. References:[1] Veeder, G. J. et al. (1994) J. Geophys. Res.,...

  • Open Access

    Constraining Mercury’s interior structure by using rotational parameters in a Bayesian framework

    by Martina Ciambellini, Attilio Rivoldini, Tim Van Hoolst, Anna Maria Gargiulo, Antonio Genova

    Introduction: Despite major advances from the MESSENGER mission, important questions remain regarding Mercury’s rotational state and internal structure. Independent analyses of Earth-based radar observations (Margot et al., 2007, 2012), radio tracking data (Mazarico et al., 2014; Verma and Margot, 2016; Genova et al., 2019; Konopliv et al., 2020), and laser altimetry (Stark et al., 2015; Bertone et al., 2021, Xiao et al., 2025) have yielded different estimates of Mercury's spin pole orientation. These orientation parameters can be combined with the gravity field under the assumption of the Cassini state to derive the polar moment of inertia C/MR² (Peale et al., 2002), widely used to constrain interior models (e.g. Genova et al., 2019; Goossens et al., 2022). However, measurements show that Mercury's spin pole deviates from the Cassini plane, suggesting that the exact Cassini state assumption is not fully consistent with observations. The observed offset thus represents an independent and meaningful constraint on Mercury's internal structure. MacPherson and Dumberry (2022) showed that the observed upper bound on the Cassini state offset implies a bulk mantle viscosity no smaller than approximately 10¹⁷ Pa s if a Maxwell rheology is assumed, a constraint that may be difficult to reconcile with the low mantle viscosities of 10¹⁶–10¹⁸ Pa s typically required to reproduce the observed k₂ values in the range 0.53–0.57 derived by Genova et al. (2019) and Konopliv et al. (2020). In this work, we incorporate the rotational model of MacPherson and Dumberry (2022) into a Markov Chain Monte Carlo (MCMC) framework to jointly use Mercury’s mass, 88-day libration amplitude, obliquity, Cassini state offset, and k₂ as observational constraints. This formulation replaces the moment of inertia of the planet, C/MR², derived under the Cassini state assumption, and the silicate-shell-to-planet moment of inertia, Ccr+m/C, with quantities directly tied to rotational and tidal measurements. We focus on the solutions of Genova et al. (2019) and Konopliv et al. (2020), which both provide k₂ estimates but differ significantly in their spin-pole orientation parameters, and assess the consistency between the geophysical observables and the corresponding interior models.Methods: We develop a Bayesian inference framework for the interior structure inversion of Mercury based on a MCMC approach. The inversion jointly uses Mercury’s mass, obliquity, offset from the Cassini plane, libration amplitude, and tidal Love number k₂ as observational constraints for the planet. Mercury is modeled as a multi-layered body, with layer radii, densities, shear moduli, and viscosities treated as free parameters. These parameters are sampled iteratively using the Metropolis-Hastings algorithm, producing an ensemble of interior models consistent with the adopted prior distributions and observational uncertainties. After verifying the convergence of all chains, we compute the marginal posterior distributions of the model parameters, which constrain the range of internal structures consistent with the full set of geophysical observables. Mercury Interior Model Inversion: The internal structure of Mercury is constrained using geophysical parameters derived from MESSENGER mission data. In this work, we compare inferred interior structure models obtained from two sets of orientation parameters reflecting significantly different rotational states. The first set is from Genova et al. (2019), who estimated an obliquity of 1.968 ± 0.027 arcmin and a Cassini state offset of 0.004 ± 1.52 arcsec, placing Mercury nearly on the Cassini plane. The second set is from Konopliv et al. (2020), who report an obliquity of 2.04 ± 0.1 arcmin and an offset of 8.9 ± 4.49 arcsec, indicating a measurable departure from the exact Cassini state. Both studies also provide estimates of the tidal Love number k₂, obtaining values of 0.569 ± 0.025 and 0.53 ± 0.03, respectively. The 88-day libration amplitude is taken from Margot et al. (2012), who reported a forced libration of 38.5 ± 1.6 arcsec. Librations are modeled following the formulation of Van Hoolst et al. (2012), accounting for the effect of gravitational coupling with a solid inner core. Mercury's obliquity and spin-axis deviation from the Cassini plane are computed using the rotational model of MacPherson and Dumberry (2022). This model accounts for viscous and electromagnetic friction at the core-mantle boundary and inner core boundary, as well as deformations resulting from tidal forcing and differential rotation between internal layers.Mercury is modeled as a four-layer body composed of a solid inner core, a fluid outer core, a mantle, and a crust. The radii of all layers are assumed as free parameters, while the mantle thickness is determined from the known planetary radius. The densities of all layers, the shear moduli, and viscosities of the solid regions are included as free parameters. Starting from a spherical description of the interior, the flattening of each internal interface is computed by imposing the observed surface flattening, gravitational equipotential surfaces at the inner- and outer-core boundaries, and consistency with the degree-2 gravity field coefficients C₂₀ and C₂₂.Preliminary results suggest that the joint use of librations, obliquity, Cassini state offset, and k₂ as independent observational constraints reveals inconsistencies between the geophysical observables associated with the two rotational solutions. These inconsistencies are partly masked when the interior inversion relies only on the moment of inertia derivded under the Cassini state assumption.

  • Open Access

    A Generalized Method for the three-dimensional characterization of the internal structure of planetary bodies based on Markov Chain Monte Carlo (MCMC) techniques

    by Gabriele Boccacci, Martina Ciambellini, Anna Maria Gargiulo, Antonio Genova

    This study presents a novel Bayesian framework for the three-dimensional characterization of the internal structure of planetary bodies, accounting for their irregular layering. The interior model inversion is formulated within a Markov Chain Monte Carlo (MCMC) approach and relies on three-dimensional model equations linking the physical properties of the internal layers to the spherical harmonic coefficients of the gravity field. The method produces statistically consistent posterior distributions of parameters that define the internal structure of each accepted model that match the target distributions of the observed gravity coefficients and complementary geophysical constraints (e.g., Love number k2, librations).Each interior model consists of concentric uniform ellipsoidal layers defined by size, density, and rheological properties. Crustal thickness variations are represented as deviations from a reference ellipsoid, providing a computationally efficient alternative to fully voxel-based representations while retaining sensitivity to lateral heterogeneities. Gravity coefficients are computed as the sum of a hydrostatic contribution, determined by the ellipsoidal shape of each layer, and a non-hydrostatic contribution derived from degree-dependent admittance.The framework yields global grids of the crustal thickness together with the corresponding gravity spectra and associated residuals. These outputs provide constraints that cannot be captured by 1-D (spherical) or 2-D (ellipsoidal) interior models commonly adopted in the literature. The proposed approach is particularly suited to small bodies of the Solar System, including icy moons and dwarf planets, for which shape irregularities exert a first-order control on internal structure and geological evolution.

  • Open Access

    Integration of Radio Tracking and Feature-based Optical Measurements for Geophysical Investigations

    by Anna Maria Gargiulo, Simone Andolfo, Tommaso Torrini, Cristina Re, Gabriele Cremonese

    Accurate estimation of geophysical parameters, including total mass, moment of inertia and rotational state of planetary bodies is essential for understanding their degree of differentiation, constraining their internal structure, and gaining insights into their evolutionary path. To improve the accuracy of these key estimates, we have developed an integrated framework that combines Earth-based radio tracking data with navigation measurements based on the observation of relevant surface features on the body’s surface.Two-way Doppler and range measurements provide robust constraints on the spacecraft motion along the line of sight and are traditionally used for gravity and geophysical investigations. Surface imagery of the central body offers complementary information, supporting the estimation of the target body’s spin vector and deviations from uniform rotational state, such as longitudinal librations.The proposed approach leverages the tracking of relevant surface features to jointly reconstruct the spacecraft trajectory and estimate geophysical parameters of the target body. Features tracked across partially overlapping images acquired sequentially during closely spaced orbital passes improve the internal consistency of the trajectory reconstruction, whereas features observed across different mission phases contribute to the refinement of the body’s rotational state. To address challenges arising from variable illumination conditions and resolution discrepancies in planetary images, hybrid strategies are adopted for feature tracking, combining conventional computer vision with Artificial Intelligence-based feature detection and matching.The framework is validated using data from the MESSENGER spacecraft during its science orbital phase around Mercury. The novel approach improves estimation accuracies with respect to single-instrument solutions and provides a flexible, effective tool for maximizing the scientific return of deep-space missions.

  • Open Access

    Inferring Venus interior structure based on present geophysical constraints

    by Anna Maria Gargiulo, Antonio Genova, Martina Ciambellini, Tommaso Torrini, Gabriel Tobie, Pascal Rosenblatt, Caroline Dumoulin

    IntroductionThe upcoming decade of Venus exploration, supported by unprecedented measurement accuracies, is expected to yield tight constraints on the planet’s interior structure. Key geophysical properties that enable inference of Venus’ interior include the Moment of Inertia (MoI), mass, and tidal Love number k2. Although current estimates and their associated uncertainties limit a detailed characterization of the deep interior, the combination of these parameters is essential for deriving consistent interior structure models. By using present observational accuracies, we investigate Venus’ interior through a Bayesian inference approach based on the Markov Chain Monte Carlo (MCMC) method [1]. In our study we account for an accurate modeling of the possible composition of the core and the mantle and retrieve pressure, temperature and density profiles that are consistent with the probability distributions of the observations.Geophysical ConstraintsVenus’ high surface temperature and pressure of about 730 K and 92 bar [2], resulting from its dense atmosphere, along with its lack of plate tectonics [3] and magnetic field, suggest significant differences in internal dynamics compared to Earth. If an Earth-like dynamo [4] were active on Venus, it would have implied convection mechanisms in an outer fluid core surrounding a solid inner core. The absence of a global magnetic field, instead, could be explained by an insufficient cooling of Venus’ core [5], or by limited convection in the mantle, insufficient to start the dynamo process [6]. While the existence of a solid inner core, thus, cannot be excluded, the lack of seismic data prevents better constraints on the mantle-core boundary. Venus’ slow rotation and consequent small oblateness hinder the determination of its MoI based solely on gravity data. Margot et al., 2021 [7] determined Venus’ MoI of 0.337± 0.024 (1-σ) through Earth-based radar observations of Venus’ spin vector. The tidal Love number k2 = 0.295±0.033 (1-σ) [8] is the only direct constraint on Venus’ interior structure, although the current uncertainty doesn’t allow definitive conclusions regarding the state of the core [9].Interior Model InversionA multi-layered configuration is assumed for the internal structure of Venus, including a crust, upper and lower mantle and an iron-rich core (Figure 1) [10]. The model accounts for both fully molten and partially solidified core scenarios, including a fluid outer core and a solid inner core. To obtain an accurate modeling of the structure of Venus, variations in mantle and core compositions are included in this study.The first step of the proposed approach is to identify a set of free parameters that can be explored to generate internal structure models. The crust is assumed to have uniform density. The upper mantle, whose constituents are assumed to be MgO, FeO and SiO2, extends to 25 GPa, which is the phase transition pressure of the Olivine to Perovskite. The lower mantle is assumed to have a homogeneous chemical composition with respect to the upper mantle. The model also considers a fluid core composed of FeSi, FeS, and FeO mixed with pure iron, as well as the potential presence of a solid core of pure iron, provided the required pressure and temperature conditions for solidification are satisfied.Further assumptions governing the generation of interior structure models include a single-stage core segregation at a certain segregation pressure, with mantle composition derived via a metal-silicate partitioning model [11]. The temperature at the crust-mantle interface is sampled within a range compatible with basaltic magma generation. A temperature drop at the core-mantle interface is also accounted for. Our MCMC method explores the parameter space using the Metropolis Hastings algorithm, and convergence is checked through the Gelman-Rubin criterion. The posterior distribution of the properties of Venus’ interior provides models that match the observed values of mass, MoI and k2. The planet’s tidal response is computed using PyALMA [12], assuming Andrade rheological model and constant viscosities.Our preliminary results based on current geophysical measurements show a distribution of models with a core radius between 3250 and 3650 km (1-σ) (Figure 2), consistent with previous estimates [7,9]. A subset of models highlighted in orange (~6%) supports the existence of a solid inner core, while those highlighted in green indicate a Perovskite to post-Perovskite phase transition in the lower mantle. The method's convergence is validated by the 2D histograms of the target values for mass, MoI, and k2 (Figure 3), which align with the observed constraints.It should be noted that the adopted compositional assumptions, combined with the observed uncertainty in k2, impose tighter constraints on the MoI than current geophysical estimates, ensuring consistency with the measured mass.SummaryWe present here a robust Bayesian inference approach to evaluate the likely interior structure of Venus based on multidisciplinary geophysical constraints. Current estimates of the tidal Love number k2 are key to inferring Venus’ interior providing more stringent constraints than the moment of inertia. The proposed methodology offers a flexible framework that can be extended to incorporate more precise data from upcoming missions enabling deeper insights into Venus’s core and mantle.References:[1] Genova A. et al (2019) GRL 46(7), 3625–3633[2] Lebonnois S. et al., (2010) JGR, 115(E6).[3] Kaula, W. M. (1994). Philos.Trans.R.Soc. A, 349 (1690).[4] Elsasser W. M. (1956) Rev.Mod.Phys 28(2), 135–163.[5] Stevenson, D. J (1983) Icarus, 54(3), 466–489[6] Nimmo, F. (2002) Geology, 30(11), 987.[7] Margot J.L. et al (2021) Nat.Astron. 5(7), 676–683.[8] Yoder C. F. and Ahrens, T. (1995) AGU, 1.[9] Dumoulin C. et al. (2017) JGR...

  • Open Access

    Constraining Enceladus' interior structure by using libration measurement in a Bayesian framework

    by Martina Ciambellini, Antonio Genova, Anna Maria Gargiulo, Gabriele Boccacci

    Introduction: One of the most compelling discoveries in planetary science is the potential existence of habitable subsurface oceans within icy moons. Among these, Saturn's moon Enceladus stands out due to its remarkable geological activity, characterized by the continuous venting of water vapor, ice particles, and organic compounds from its south polar region [1]. Cassini's comprehensive suite of measurements, including gravity data, confirmed the existence of a global subsurface ocean [2]. Accurately modeling the internal structure of Enceladus is crucial for assessing its habitability. Geophysical parameters, such as total mass and moment of inertia (MoI), are effective at constraining the total thickness of the hydrosphere, but they provide limited information on the separate contributions of the ice shell and the underlying liquid ocean. In contrast, measurements of physical librations in longitude are particularly sensitive to the internal structure of the hydrosphere, as they are influenced by the degree of mechanical decoupling provided by the liquid layer and the rigidity of the overlying ice shell. By combining mass and the moment of inertia measurements with libration amplitude estimate, a Bayesian inference approach enables tighter constraints on the deep interior and hydrosphere properties. This study presents an internal structure framework based on the Markov Chain Monte Carlo (MCMC) method that is well-suited for the estimation of Enceladus’ interior properties with rigorously quantified uncertainties by exploring the parameter space.Methods: The mass, MoI and libration amplitude provide constraints that are integrated into a Bayesian inference framework, which is used to infer the internal properties of the investigated body. In particular, we implemented a MCMC algorithm to invert interior models by varying the free parameters associated with the structure of an icy moon. In accordance with the methodologies employed and tested in previous studies [3-4], our approach considers the body to be a multi-layered structure with free parameters of layer size, density, and rheology. These parameters are iteratively refined within the MCMC framework using the Metropolis–Hastings algorithm, which generates a diverse set of interior models. To ensure robust mapping of the parameter space, 20 independent chains are employed, each generating approximately 50,000 accepted models. Following the convergence of all chains, probability distributions for each parameter are derived, yielding constraints on the likely internal structure that are consistent with the observed geophysical data.Enceladus Interior Model Inversion: The internal structure of Enceladus is constrained using a combination of geophysical parameters derived from Cassini mission data. The mass of Enceladus, determined from radio science data, is 1.08022 ± 0.00108 × 1020 kg [5], while the normalized MoI is estimated at 0.335 ± 0.002 [6]. These parameters place fundamental constraints on the total thickness of the hydrosphere, while remaining insensitive to the separate contributions of the ice shell and the subsurface ocean [6]. Physical librations, however, offer a crucial complementary constraint, as it is highly sensitive to the thickness and mechanical properties of the ice shell. The libration amplitude of Enceladus was determined from optical tracking of surface features by the Cassini spacecraft, revealing a physical libration of 0.120 ± 0.007°, which corresponds to an equatorial displacement of approximately 530 ± 30 m [7].In this work, we implement the elastic libration model [8], which accounts for the gravitational torques acting on both the periodic and static tidal bulges and includes the complex gravitational interactions between the individual layers of the icy moon arising from their mutual misalignment and the pressure forces exerted by the liquid ocean on the surrounding solid layers. The model captures the contributions from both the direct external gravitational torque and the internal gravitational coupling between layers, as well as the pressure feedback from the ocean.The moon is modeled with a three-layer structure comprising a rocky core, a subsurface ocean, and an ice shell. The thicknesses of the core and ice shell were treated as free parameters, while the ocean thickness was determined based on Enceladus’ known radius. The free parameters included the densities of the core and ocean, while the ice shell density was fixed at 917 kg m-3. The viscosities and shear moduli of the shell and core were included as free parameters. Within the MCMC framework, each proposed interior model starts from a simplified spherical approximation, characterized by an average radius and the densities of each layer. The hydrostatic shapes of the internal interfaces are then computed assuming hydrostatic equilibrium, calculating the polar and equatorial eccentricities of each layer using a fourth-order formulation [9].The results suggest that incorporating libration amplitude can significantly improve the characterization of the internal differentiation withing Enceladus' hydrosphere, providing an estimate of the ice shell thickness with an uncertainty of approximately 1.5 km around a mean value of 21 km, consistent with previous studies.Summary: The application of MCMC inversion with libration constraint offers a powerful approach to precisely determine the ice shell thickness of Enceladus, achieving a constraint accuracy of approximately 1.5 km. This framework can be readily adapted to other icy moons, providing a valuable tool for probing the internal structures of ocean worlds throughout the solar system. References:[1] Glein et al. (2015) GeCoA, 162, 202. [2] Iess et al. (2014), Sci, 344, 78. [3] Genova A. et al (2019) GRL 46(7), 3625–3633. [4] Petricca et al. (2023) GRL, 50, e2023GL104016. [5] Hemingway et al. (2018) in Enceladus and the Icy Moons of...

  • Open Access

    Neural Network-Aided Optical Navigation for Precise Lunar Descent Operations

    by Simone Andolfo, Antonio Genova, Fabio Valerio Buonomo, Anna Maria Gargiulo, Mohamed El Awag, Pierluigi Federici, Riccardo Teodori, Riccardo La Grassa, Cristina Re, Gabriele Cremonese

    Advanced navigation capabilities are essential for precise landing operations, enabling access to critical lunar sites and supporting future lunar infrastructure. To achieve accurate positioning, innovative navigation methods leveraging neural network frameworks are being developed to detect distinctive lunar surface features, such as craters, from imaging data. By matching detected features with known landmarks stored in an onboard reference database, key navigation measurements are retrieved to refine the spacecraft trajectory, enabling real-time planning for hazard avoidance. This work presents a crater-based navigation system for planetary descent operations, which leverages a robust machine learning approach for crater detection in optical images. A thorough analysis of the attainable detection accuracies was performed by evaluating the network performance on diverse sets of synthetic images rendered at different illumination conditions through a custom Blender-based pipeline. Simulation campaigns, based on the JAXA Smart Lander for Investigating Moon mission, were then carried out to demonstrate the system’s performance, achieving final position errors consistent with 3 − σ uncertainties lower than 100 m on the horizontal plane at altitudes as low as 10 km. This level of accuracy is key to achieving enhanced control during the approach and vertical descent phases, thereby ensuring operational safety and facilitating precise landing.


  • Open Access

    Estimation of Venus' atmospheric density through EnVision precise orbit determination

    by Anna Maria Gargiulo, Antonio Genova, Flavio Petricca, Edoardo Del Vecchio, Simone Andolfo, Tommaso Torrini, Pascal Rosenblatt, Sébastien Lebonnois, Jean-Charles Marty, Caroline Dumoulin

    EnVision radio science investigation will deepen our understanding of Venus’ gravity, interior structure and atmospheric properties. To address these scientific questions, a two-way link communication (configuration X/X/Ka-band) is established with the ESA ESTRACK ground stations enabling precise orbit determination (POD) during the science phase. An accurate modeling of the spacecraft’s dynamics, including the atmospheric drag acceleration, is key for retrieving EnVision’s trajectory and constraining Venus’ gravity field, tides and orientation parameters.Dedicated radio occultation campaigns are designed to characterize electron density profiles in the ionosphere and atmospheric density, pressure and temperature in the mesosphere and upper troposphere of Venus. Furthermore, an accurate POD of the spacecraft also provides complementary information on the atmospheric density at the altitudes crossed by the probe, extending the science return of the EnVision mission.The atmospheric drag perturbation strongly affects spacecraft trajectories that are characterized by a pericenter altitude above Venus’ surface of less than 220 km. By accounting for different Venus’ atmospheric models, e.g., the Venus Climate Database (VCD) and the Venus Global Reference Atmospheric Model (Venus-GRAM), we investigate the impact of potential errors and uncertainties in the predicted atmospheric properties on the orbit evolution of the spacecraft. We note significant inconsistencies between Venus’ atmospheric models at the spacecraft altitudes including atmospheric density differences of more than 200%. These discrepancies may be representative of the current knowledge of Venus’ upper atmosphere and thermosphere. Thus, we carried out a perturbative analysis of the dynamical forces by introducing a mismodeling in the atmospheric density profiles. We assumed the VCD for the simulation of the radio tracking measurements and we included as a priori model in the estimation process the Venus-GRAM. By developing a batch sequential filter that adjusts a set of atmospheric density scale factors, we compensated for the mismodeling and improved the quality of the dynamical model and of the orbit determination. The proposed approach enables an estimation of the atmospheric density at the spacecraft altitudes with an accuracy of 25% and accuracies in the orbit reconstruction of 1-2 m, 30-40 m and 20-30 m in the radial, transverse and normal directions.