Manikandan Mani
Manikandan Mani has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Ganapathy Somaskandan
Annamalai University
4 shared publications - Ilanji Akilandam Chidambaram
Annamalai University
2 shared publications - Praveen Kumar Thota
Annamalai University
2 shared publications - Sanepalle Gopal Reddy
Department of Electrical Engineering, Annamalai University, Chidambaram, Tamil Nadu, India
2 shared publications - Abdul Quawi
B. S. Abdur Rahman Crescent Institute of Science and Technology
1 shared publication - Ch. Sathish
Annamalai University
1 shared publication
Latest Publications
- 1 March 2026
- Published by Konya Muhendislik Bilimleri Dergisi in Konya Journal of Engineering Sciences
- Vol. 14 (1) , 175-192
OPTIMIZED CONTROL STRATEGY IN GRID CONNECTED CASCADED MULTI LEVEL INVERTER TO IMPROVE GRID STABILITY
This paper proposes an optimized control strategy for a grid-connected cascaded multilevel inverter designed to enhance the grid stability and power quality in smart grid environments. The novelty of this work lies in the implementation of independently regulated low-voltage DC links for each H-bridge cell, which enables modular control, fault tolerance, and improved dynamic performance. In addition, the control scheme operates without the need for reference frame transformation, significantly reducing the computational complexity. The main objective is to achieve selective and flexible compensation of disturbing currents caused by nonlinear, unbalanced, or reactive loads using current decomposition based on the conservative power theory (CPT). This decomposition allows the system to isolate specific current components and apply targeted compensation strategies in real time. Experimental validation under both ideal and degraded grid conditions demonstrates the effectiveness of the proposed control method. Key performance outcomes include the Total Harmonic Distortion (THD) reduction in the source current from 13.2% to 3.1%. The voltage regulation accuracy 1.5% of the reference value across the variable load conditions. Improved dynamic response time, with compensation settling achieved within 20 ms during load transients. Stable operation under voltage sag conditions up to 30% depth, with maintained power compensation functionality using the MATLAB Simulink environment.
- 1 March 2026
- Published by Konya Muhendislik Bilimleri Dergisi in Konya Journal of Engineering Sciences
- Vol. 14 (1) , 175-192
OPTIMIZED CONTROL STRATEGY IN GRID CONNECTED CASCADED MULTI LEVEL INVERTER TO IMPROVE GRID STABILITY
This paper proposes an optimized control strategy for a grid-connected cascaded multilevel inverter designed to enhance the grid stability and power quality in smart grid environments. The novelty of this work lies in the implementation of independently regulated low-voltage DC links for each H-bridge cell, which enables modular control, fault tolerance, and improved dynamic performance. In addition, the control scheme operates without the need for reference frame transformation, significantly reducing the computational complexity. The main objective is to achieve selective and flexible compensation of disturbing currents caused by nonlinear, unbalanced, or reactive loads using current decomposition based on the conservative power theory (CPT). This decomposition allows the system to isolate specific current components and apply targeted compensation strategies in real time. Experimental validation under both ideal and degraded grid conditions demonstrates the effectiveness of the proposed control method. Key performance outcomes include the Total Harmonic Distortion (THD) reduction in the source current from 13.2% to 3.1%. The voltage regulation accuracy 1.5% of the reference value across the variable load conditions. Improved dynamic response time, with compensation settling achieved within 20 ms during load transients. Stable operation under voltage sag conditions up to 30% depth, with maintained power compensation functionality using the MATLAB Simulink environment.
- 25 July 2025
- Published by Elsevier in Solar Energy
- Vol. 299
Integrating renewable resources and electric Vehicles: An approach for effective energy management in DC microgrid
- 25 July 2025
- Published by Elsevier in Solar Energy
- Vol. 299
Integrating renewable resources and electric Vehicles: An approach for effective energy management in DC microgrid
- Open Access
- 1 September 2024
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 15 (3) , 1851-1870
CNN based fault event classification and power quality enhancement in hybrid power system
A resilient approach is presented in this study for detecting and classifying faults for power distribution systems integrating renewable energy sources (RES). Combining discrete wavelet transform (DWT) and convolutional neural network (CNN). The suggested framework addresses the challenges of RES intermittency and kinetic energy insufficiency. The recommended methodology is evaluated in a MATLAB platform, featuring a power distribution system with photovoltaic (PV) and wind energy conversion system (WECS), stabilized by a boost converter and cascaded fuzzy logic controller (CFLC) based maximum power point tracking (MPPT) for PV and a PI controller for WECS. Comparative analyses demonstrate the superior performance of the CNN classifier with an accuracy of 96.33%, outshining existing classifiers, including ANN. Furthermore, under various fault conditions, the CNN consistently achieves high accuracy, with 98% for Islanding, 95% for line-to-ground fault, and 96% for line-to-line fault. The proposed approach exhibits excellent computational efficiency, with a training time of 10.5 hours, inference speed of 5 milliseconds, and resource utilization of 85%, emphasizing its suitability for instantaneous fault identification in power systems.
- 1 September 2024
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 15 (3) , 1851-1870
Open AccessCNN based fault event classification and power quality enhancement in hybrid power system
A resilient approach is presented in this study for detecting and classifying faults for power distribution systems integrating renewable energy sources (RES). Combining discrete wavelet transform (DWT) and convolutional neural network (CNN). The suggested framework addresses the challenges of RES intermittency and kinetic energy insufficiency. The recommended methodology is evaluated in a MATLAB platform, featuring a power distribution system with photovoltaic (PV) and wind energy conversion system (WECS), stabilized by a boost converter and cascaded fuzzy logic controller (CFLC) based maximum power point tracking (MPPT) for PV and a PI controller for WECS. Comparative analyses demonstrate the superior performance of the CNN classifier with an accuracy of 96.33%, outshining existing classifiers, including ANN. Furthermore, under various fault conditions, the CNN consistently achieves high accuracy, with 98% for Islanding, 95% for line-to-ground fault, and 96% for line-to-line fault. The proposed approach exhibits excellent computational efficiency, with a training time of 10.5 hours, inference speed of 5 milliseconds, and resource utilization of 85%, emphasizing its suitability for instantaneous fault identification in power systems.
- 19 February 2024
- Published by Wydawnictwo SIGMA-NOT, sp. z.o.o. in PRZEGLĄD ELEKTROTECHNICZNY
- Vol. 1 (2) , 261-268
Voltage Stability Analysis for Grid Connected PV System using Optimized Control on IOT based ANFIS
The growing prevalence of sensitive power electronic loads and PV system installations in distributed power system have sparked serious concerns about the maintenance of Power Quality (PQ). The non-linear current drawn by these sensitive loads lead to significant amount of voltage instabilities at the Point of Common Coupling (PCC), while intermittency associated with the Photovoltaic (PV) system incites grid instability. Thus, the poor PQ has adverse impact over the lifetime of every components interfaced to the distributed power system, ensuing enormous economic losses. With the aim of enhancing the stability of the distributed power system by curbing the PQ issues, a Static Synchronous Compensator (STATCOM), which is an effective Flexible AC Transmission Systems (FACTS) controller is selected in this work. Moreover, the output from the PV is maximized with the aid of Boost Integrated Landsman Converter (BILC) and Cascaded Adaptive Network-based Fuzzy Inference System (ANFIS) based Maximum Power Point Tracking (MPPT) approach. Moreover, the essential parameters that impact the operation of the proposed topology is tracked and monitored in Internet of Things (IoT) platform. The entire approach is evaluated experimentally and through MATLAB simulation.
- 19 February 2024
- Published by Wydawnictwo SIGMA-NOT, sp. z.o.o. in PRZEGLĄD ELEKTROTECHNICZNY
- Vol. 1 (2) , 261-268
Voltage Stability Analysis for Grid Connected PV System using Optimized Control on IOT based ANFIS
The growing prevalence of sensitive power electronic loads and PV system installations in distributed power system have sparked serious concerns about the maintenance of Power Quality (PQ). The non-linear current drawn by these sensitive loads lead to significant amount of voltage instabilities at the Point of Common Coupling (PCC), while intermittency associated with the Photovoltaic (PV) system incites grid instability. Thus, the poor PQ has adverse impact over the lifetime of every components interfaced to the distributed power system, ensuing enormous economic losses. With the aim of enhancing the stability of the distributed power system by curbing the PQ issues, a Static Synchronous Compensator (STATCOM), which is an effective Flexible AC Transmission Systems (FACTS) controller is selected in this work. Moreover, the output from the PV is maximized with the aid of Boost Integrated Landsman Converter (BILC) and Cascaded Adaptive Network-based Fuzzy Inference System (ANFIS) based Maximum Power Point Tracking (MPPT) approach. Moreover, the essential parameters that impact the operation of the proposed topology is tracked and monitored in Internet of Things (IoT) platform. The entire approach is evaluated experimentally and through MATLAB simulation.
- Open Access
- 30 September 2023
- Published by International Academic Publishing House in INTERNATIONAL JOURNAL OF EXPERIMENTAL RESEARCH AND REVIEW
- Vol. 33, 57-70
An Efficient PV - Integrated UPQC System for Power Quality Enhancement Using Improved Chicken Swarm Optimization
In today’s world, the power distribution system's problems with Power Quality (PQ) are not unfamiliar. However, customer awareness of these issues has also risen. Likewise, there are many conventional solutions to improve the power quality. However, these traditional solutions rely on passive elements and frequently fail to respond effectively as the nature of the power system changes. Custom power devices provide adaptable solutions for many issues. Therefore, a Unified Power Quality Conditioner (UPQC) Coupled with a PV system is proposed in this paper to improve the PQ problems, including fluctuations, voltage sag and swell etc. The deployment of an Interleaved Zeta converter aids in maintaining the constant DC link voltage. In order to derive the maximum desirable power from PV system, STATCOM with Adaptive Neuro- Fuzzy Interference System (ANFIS) is used, which is fine-tuned with the help of the Improved Chicken Swarm (ICS) algorithm. In addition, UPQC with series and shunt converter is employed to decrease the current and voltage harmonics, thereby enhancing the power factor. For controlling the working of UPQC, the d-q theory-based Proportional Integral (PI) is proposed. The suggested design of PV-UPQC is evaluated and the simulation results are obtained in the MATLAB platform with a reduced THD of 2.01%.
- 30 September 2023
- Published by International Academic Publishing House in INTERNATIONAL JOURNAL OF EXPERIMENTAL RESEARCH AND REVIEW
- Vol. 33, 57-70
Open AccessAn Efficient PV - Integrated UPQC System for Power Quality Enhancement Using Improved Chicken Swarm Optimization
In today’s world, the power distribution system's problems with Power Quality (PQ) are not unfamiliar. However, customer awareness of these issues has also risen. Likewise, there are many conventional solutions to improve the power quality. However, these traditional solutions rely on passive elements and frequently fail to respond effectively as the nature of the power system changes. Custom power devices provide adaptable solutions for many issues. Therefore, a Unified Power Quality Conditioner (UPQC) Coupled with a PV system is proposed in this paper to improve the PQ problems, including fluctuations, voltage sag and swell etc. The deployment of an Interleaved Zeta converter aids in maintaining the constant DC link voltage. In order to derive the maximum desirable power from PV system, STATCOM with Adaptive Neuro- Fuzzy Interference System (ANFIS) is used, which is fine-tuned with the help of the Improved Chicken Swarm (ICS) algorithm. In addition, UPQC with series and shunt converter is employed to decrease the current and voltage harmonics, thereby enhancing the power factor. For controlling the working of UPQC, the d-q theory-based Proportional Integral (PI) is proposed. The suggested design of PV-UPQC is evaluated and the simulation results are obtained in the MATLAB platform with a reduced THD of 2.01%.
- Open Access
- 30 April 2023
- Published by International Academic Publishing House in INTERNATIONAL JOURNAL OF EXPERIMENTAL RESEARCH AND REVIEW
- Vol. 30, 109-118
The Voltage stability analysis for grid-connected PV system using optimized control tested by IEEE 14 &30 bus system
In the research work presented in this paper, we present a grid-connected solar photovoltaic (PV) system, which is focused on various factors, such as the low oxide emission and high energy efficiency of the system. Solar PV systems have a greater impact on grid stability than any other energy source. IEEE 14 bus test system is used to verify the voltage stability of the bus. It is a concept of a methodology using a RNN-based PV controller in conjunction with a Landsman converter to maintain the PV system's voltage-gain ratio and improve it. Conversely, an ANN-based boost Integrated Landsman Converter improves the solar photovoltaic voltage connected to the grid. In addition, continuous monitoring of solar plants (irradiation, sunlight & voltage) is implemented through the Internet of Things (IoT). A grid voltage stability and analysis is taken by 14 buses, five generators and 12 loads test system is tested. The proposed two methods have been proven to be effective regarding the uncertainties related to loading demand. This approach offers voltage stability for grid-connected PV systems in industrial sectors. The IEEE 14 & 30 bus system tested this work using MATLAB simulation.
- 30 April 2023
- Published by International Academic Publishing House in INTERNATIONAL JOURNAL OF EXPERIMENTAL RESEARCH AND REVIEW
- Vol. 30, 109-118
Open AccessThe Voltage stability analysis for grid-connected PV system using optimized control tested by IEEE 14 &30 bus system
In the research work presented in this paper, we present a grid-connected solar photovoltaic (PV) system, which is focused on various factors, such as the low oxide emission and high energy efficiency of the system. Solar PV systems have a greater impact on grid stability than any other energy source. IEEE 14 bus test system is used to verify the voltage stability of the bus. It is a concept of a methodology using a RNN-based PV controller in conjunction with a Landsman converter to maintain the PV system's voltage-gain ratio and improve it. Conversely, an ANN-based boost Integrated Landsman Converter improves the solar photovoltaic voltage connected to the grid. In addition, continuous monitoring of solar plants (irradiation, sunlight & voltage) is implemented through the Internet of Things (IoT). A grid voltage stability and analysis is taken by 14 buses, five generators and 12 loads test system is tested. The proposed two methods have been proven to be effective regarding the uncertainties related to loading demand. This approach offers voltage stability for grid-connected PV systems in industrial sectors. The IEEE 14 & 30 bus system tested this work using MATLAB simulation.
- Open Access
- 15 April 2023
- Published by University of Slavonski Brod in Tehnicki vjesnik - Technical Gazette
- Vol. 30 (2) , 381-389
An ANN Based MPPT for Power Monitoring in Smart Grid using Interleaved Boost Converter
The energy sector is highly concerned about the rapid growth in power utilization which causes an imbalance between supply and demand. A demand-side energy management technique has to be developed to prevent substantial supply-side shortages and impr...
- 15 April 2023
- Published by University of Slavonski Brod in Tehnicki vjesnik - Technical Gazette
- Vol. 30 (2) , 381-389
Open AccessAn ANN Based MPPT for Power Monitoring in Smart Grid using Interleaved Boost Converter
The energy sector is highly concerned about the rapid growth in power utilization which causes an imbalance between supply and demand. A demand-side energy management technique has to be developed to prevent substantial supply-side shortages and impr...
- Open Access
- 4 January 2023
- Published by National Technical University Kharkiv Polytechnic Institute in Electrical Engineering & Electromechanics
- No. 1,p. 63-70
Intelligent cascaded adaptive neuro fuzzy interface system controller fed KY converter for hybrid energy based microgrid applications
Purpose. This article proposes a new control strategy for KY (DC-DC voltage step up) converter. The proposed hybrid energy system fed KY converter is utilized along with adaptive neuro fuzzy interface system controller. Renewable energy sources have recently acquired immense significance as a result of rising demand for electricity, rapid fossil fuel exhaustion and the threat of global warming. However, due to their inherent intermittency, these sources offer low system reliability. So, a hybrid energy system that encompasses wind/photovoltaic/battery is implemented in order to obtain a stable and reliable microgrid. Both solar and wind energy is easily accessible with huge untapped potential and together they account for more than 60 % of yearly net new electricity generation capacity additions around the world. Novelty. A KY converter is adopted here for enhancing the output of the photovoltaic system and its operation is controlled with the help of a cascaded an adaptive neuro fuzzy interface system controller. Originality. Increase of the overall system stability and reliability using hybrid energy system fed KY converter is utilized along with adaptive neuro fuzzy interface system controller. Practical value. A proportional integral controller is used in the doubly fed induction generator based wind energy conversion system for controlling the operation of the pulse width modulation rectifier in order to deliver a controlled DC output voltage. A battery energy storage system, which uses a battery converter to be connected to the DC link, stores the excess power generated from the renewable energy sources. Based on the battery’s state of charge, its charging and discharging operation is controlled using a proportional integral controller. The controlled DC link voltage is fed to the three phase voltage source inverter for effective DC to AC voltage conversion. The inverter is connected to the three phase grid via an LC filter for effective harmonics mitigation. A proportional integral controller is used for achieving effective grid voltage synchronization. Results. The proposed model is simulated using MATLAB/Simulink, and from the obtained outcomes, it is noted that the cascaded adaptive neuro fuzzy interface system controller assisted KY converter is capable of maintaining the stable operation of the microgrid with an excellent efficiency of 93 %.
- 4 January 2023
- Published by National Technical University Kharkiv Polytechnic Institute in Electrical Engineering & Electromechanics
- No. 1,p. 63-70
Open AccessIntelligent cascaded adaptive neuro fuzzy interface system controller fed KY converter for hybrid energy based microgrid applications
Purpose. This article proposes a new control strategy for KY (DC-DC voltage step up) converter. The proposed hybrid energy system fed KY converter is utilized along with adaptive neuro fuzzy interface system controller. Renewable energy sources have recently acquired immense significance as a result of rising demand for electricity, rapid fossil fuel exhaustion and the threat of global warming. However, due to their inherent intermittency, these sources offer low system reliability. So, a hybrid energy system that encompasses wind/photovoltaic/battery is implemented in order to obtain a stable and reliable microgrid. Both solar and wind energy is easily accessible with huge untapped potential and together they account for more than 60 % of yearly net new electricity generation capacity additions around the world. Novelty. A KY converter is adopted here for enhancing the output of the photovoltaic system and its operation is controlled with the help of a cascaded an adaptive neuro fuzzy interface system controller. Originality. Increase of the overall system stability and reliability using hybrid energy system fed KY converter is utilized along with adaptive neuro fuzzy interface system controller. Practical value. A proportional integral controller is used in the doubly fed induction generator based wind energy conversion system for controlling the operation of the pulse width modulation rectifier in order to deliver a controlled DC output voltage. A battery energy storage system, which uses a battery converter to be connected to the DC link, stores the excess power generated from the renewable energy sources. Based on the battery’s state of charge, its charging and discharging operation is controlled using a proportional integral controller. The controlled DC link voltage is fed to the three phase voltage source inverter for effective DC to AC voltage conversion. The inverter is connected to the three phase grid via an LC filter for effective harmonics mitigation. A proportional integral controller is used for achieving effective grid voltage synchronization. Results. The proposed model is simulated using MATLAB/Simulink, and from the obtained outcomes, it is noted that the cascaded adaptive neuro fuzzy interface system controller assisted KY converter is capable of maintaining the stable operation of the microgrid with an excellent efficiency of 93 %.
- Open Access
- 8 July 2022
- Published by National Technical University Kharkiv Polytechnic Institute in Electrical Engineering & Electromechanics
- No. 4,p. 44-50
Improvement of power quality in grid-connected hybrid system with power monitoring and control based on internet of things approach
Purpose. This article proposes a new control monitoring grid connected hybrid system. The proposed system, improvement of power quality is achieved with internet of things power monitoring approach in solar photovoltaic grid system network. The novelty of the proposed work consists in presenting solar power monitoring and power control based internet of things algorithm, to generate DC voltage and maintain the constant voltage for grid connected hybrid system. Methods. The proposed algorithm which provides sophisticated and cost-effective solution for measuring the fault and as maximum power point tracking assures controlled output and supports the extraction of complete power from the photovoltaic panel. The objective of the work is to monitor and control the grid statistics for reliable and efficient delivery of power to a hybrid power generation system. Internet of things is regarded as a network comprising of electronic embedded devices, physical objects, network connections, and sensors enabling the sensing, analysis, and exchange of data. The proposed control technique strategy is validated using MATLAB/Simulink software and real time implementation to analysis the working performances. Results. The results obtained show that the power quality issue, the proposed system to overcome through monitoring of fault solar panel and improving of power quality. The obtained output from the hybrid system is fed to the grid through a 3ϕ voltage source inverter is more reliable and maintained power quality. The power obtained from the entire hybrid setup is measured by the sensor present in the internet of things-based module. In addition to that, the photovoltaic voltage is improved by a boost converter and optimum reliability is obtained with the adoption of the perturb & observe approach. The challenges in the integration of internet of things – smart grid must be overcome for the network to function efficiently. Originality. Compensation of power quality issues, grid stability and harmonic reduction in distribution network by using photovoltaic based internet of things approach is utilized along with sensor controller. Practical value. The work concerns a network comprising of electronic embedded devices, physical objects, network connections, and sensors enabling the sensing, analysis, and exchange of data. In this paper, internet of things sensors are installed in various stages of the smart grid in a hybrid photovoltaic –wind system. It tracks and manages network statistics for safe and efficient power delivery. The study is validated by the simulation results based on MATLAB/Simulink software and real time implementation.
- 8 July 2022
- Published by National Technical University Kharkiv Polytechnic Institute in Electrical Engineering & Electromechanics
- No. 4,p. 44-50
Open AccessImprovement of power quality in grid-connected hybrid system with power monitoring and control based on internet of things approach
Purpose. This article proposes a new control monitoring grid connected hybrid system. The proposed system, improvement of power quality is achieved with internet of things power monitoring approach in solar photovoltaic grid system network. The novelty of the proposed work consists in presenting solar power monitoring and power control based internet of things algorithm, to generate DC voltage and maintain the constant voltage for grid connected hybrid system. Methods. The proposed algorithm which provides sophisticated and cost-effective solution for measuring the fault and as maximum power point tracking assures controlled output and supports the extraction of complete power from the photovoltaic panel. The objective of the work is to monitor and control the grid statistics for reliable and efficient delivery of power to a hybrid power generation system. Internet of things is regarded as a network comprising of electronic embedded devices, physical objects, network connections, and sensors enabling the sensing, analysis, and exchange of data. The proposed control technique strategy is validated using MATLAB/Simulink software and real time implementation to analysis the working performances. Results. The results obtained show that the power quality issue, the proposed system to overcome through monitoring of fault solar panel and improving of power quality. The obtained output from the hybrid system is fed to the grid through a 3ϕ voltage source inverter is more reliable and maintained power quality. The power obtained from the entire hybrid setup is measured by the sensor present in the internet of things-based module. In addition to that, the photovoltaic voltage is improved by a boost converter and optimum reliability is obtained with the adoption of the perturb & observe approach. The challenges in the integration of internet of things – smart grid must be overcome for the network to function efficiently. Originality. Compensation of power quality issues, grid stability and harmonic reduction in distribution network by using photovoltaic based internet of things approach is utilized along with sensor controller. Practical value. The work concerns a network comprising of electronic embedded devices, physical objects, network connections, and sensors enabling the sensing, analysis, and exchange of data. In this paper, internet of things sensors are installed in various stages of the smart grid in a hybrid photovoltaic –wind system. It tracks and manages network statistics for safe and efficient power delivery. The study is validated by the simulation results based on MATLAB/Simulink software and real time implementation.
- Open Access
- 5 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 72263-72278
Three Phase Four Switch Inverter Based DVR for Power Quality Improvement With Optimized CSA Approach
Industries driven by electric power require controlled and improved power quality for the optimal exploitation of resources. However, certain crucial issues greatly influence power quality, causing monetary losses to both the utility and customers. Numerous custom power devices are available to compensate for power quality issues; however, these devices alter the parameters of the transmission and distribution systems. Hence, a dynamic voltage restorer (DVR) is adopted in this study, which mitigates voltage disorders by establishing the desired quality and voltage level demanded by any sensitive load. The DVR adopts a 3ϕ four-switch voltage-source inverter (VSI) that acts as a cost-effective solution with a reduced number of switches. The cuckoo search algorithm (CSA) was utilized in this study as it solves multiple optimization issues with ease of implementation. Because it is robust to variations in the system, it significantly aids in enhancing the efficiency of the DVR by compensating for the variations in voltage and minimizing the total harmonic distortion (THD). The entire work was verified in MATLAB/Simulink to demonstrate the effectiveness of the introduced technique in smoothing the distorted voltage. The proposed approach achieved an efficiency of 92.6%witha simulation THD of 2.8% and hardware THD of 2.95%.
- 5 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 72263-72278
Open AccessThree Phase Four Switch Inverter Based DVR for Power Quality Improvement With Optimized CSA Approach
Industries driven by electric power require controlled and improved power quality for the optimal exploitation of resources. However, certain crucial issues greatly influence power quality, causing monetary losses to both the utility and customers. Numerous custom power devices are available to compensate for power quality issues; however, these devices alter the parameters of the transmission and distribution systems. Hence, a dynamic voltage restorer (DVR) is adopted in this study, which mitigates voltage disorders by establishing the desired quality and voltage level demanded by any sensitive load. The DVR adopts a 3ϕ four-switch voltage-source inverter (VSI) that acts as a cost-effective solution with a reduced number of switches. The cuckoo search algorithm (CSA) was utilized in this study as it solves multiple optimization issues with ease of implementation. Because it is robust to variations in the system, it significantly aids in enhancing the efficiency of the DVR by compensating for the variations in voltage and minimizing the total harmonic distortion (THD). The entire work was verified in MATLAB/Simulink to demonstrate the effectiveness of the introduced technique in smoothing the distorted voltage. The proposed approach achieved an efficiency of 92.6%witha simulation THD of 2.8% and hardware THD of 2.95%.