Zhouyan Qiu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zhouyan Qiu has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Pedro Arias
CINTECX, Applied Geotechnology Group, Universidade de Vigo, 36310 Vigo, Spain
9 shared publications - Joaquin Martinez Sanchez
CINTECX, Applied Geotechnology Group, Universidade de Vigo, 36310 Vigo, Spain
8 shared publications Arshia Ghasemlou
1 shared publication- Arshia Ghasemlou
CINTECX, Universidade de Vigo, GeoTECH Group, Campus Universitario de Vigo, As Lagoas, Marcosende, 36310 Vigo, Spain
1 shared publication - Daniela Coltuc
Politehnica Univ. of Bucharest (Romania)
1 shared publication Jesús Balado
1 shared publication
Latest Publications
- Open Access
- 18 September 2025
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-4/W, 127-134
Adaptive Voxel-Based Weighted Multisensor Point Cloud Fusion with Color Consistency for Indoor Digital Twin Construction
Building accurate indoor digital twins is essential for smart-building services such as asset tracking, space planning, and AR/VR navigation. Yet a single LiDAR sensor cannot supply both millimeter-level accuracy and complete coverage: fixed terrestrial laser scanners (TLSs) leave occlusion holes, whereas handheld mobile laser scanners (HMLSs) suffer from lower geometric stability and color drift. We propose an adaptive voxel-based fusion pipeline that combines a FARO Focus3D X330 TLS with a CHCNAV RS10 HMLS to overcome these limits. First, the handheld point cloud is rigidly registered to the TLS reference using Iterative Closest Point. TLS voxels with sparse points are flagged as holes; for each hole we admit only handheld points whose point-to-plane distance and normal deviation fall below strict thresholds, ensuring geometric consistency. Next, we correct color bias by learning a global linear RGB mapping from overlapping scans and refining it locally with weighted regression. Finally, we blend colors across the TLS–handheld boundary to remove visible seams. Experiments on classroom scenes from a smart-campus testbed show that our method recovers 85.7 % of missing surfaces, lowers the global point-to-plane RMSE by 14.8 %, and improves mean color difference by 22.2%. The resulting high-fidelity, color-consistent indoor models give facility managers and planners reliable data for maintenance scheduling, occupancy analysis, and long-term space optimization.
- 18 September 2025
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-4/W, 127-134
Open AccessAdaptive Voxel-Based Weighted Multisensor Point Cloud Fusion with Color Consistency for Indoor Digital Twin Construction
Building accurate indoor digital twins is essential for smart-building services such as asset tracking, space planning, and AR/VR navigation. Yet a single LiDAR sensor cannot supply both millimeter-level accuracy and complete coverage: fixed terrestrial laser scanners (TLSs) leave occlusion holes, whereas handheld mobile laser scanners (HMLSs) suffer from lower geometric stability and color drift. We propose an adaptive voxel-based fusion pipeline that combines a FARO Focus3D X330 TLS with a CHCNAV RS10 HMLS to overcome these limits. First, the handheld point cloud is rigidly registered to the TLS reference using Iterative Closest Point. TLS voxels with sparse points are flagged as holes; for each hole we admit only handheld points whose point-to-plane distance and normal deviation fall below strict thresholds, ensuring geometric consistency. Next, we correct color bias by learning a global linear RGB mapping from overlapping scans and refining it locally with weighted regression. Finally, we blend colors across the TLS–handheld boundary to remove visible seams. Experiments on classroom scenes from a smart-campus testbed show that our method recovers 85.7 % of missing surfaces, lowers the global point-to-plane RMSE by 14.8 %, and improves mean color difference by 22.2%. The resulting high-fidelity, color-consistent indoor models give facility managers and planners reliable data for maintenance scheduling, occupancy analysis, and long-term space optimization.
- Open Access
- 2 May 2025
- Published by Elsevier in Journal of Building Engineering
- Vol. 108
HoloLens 2 performance analysis for indoor/outdoor 3D mapping
- 2 May 2025
- Published by Elsevier in Journal of Building Engineering
- Vol. 108
Open AccessHoloLens 2 performance analysis for indoor/outdoor 3D mapping
- Open Access
- 22 April 2025
- Published by Elsevier in Energy and Buildings
- Vol. 339
Fusion of thermal images and point clouds for enhanced wall temperature uniformity analysis in building environments
- 22 April 2025
- Published by Elsevier in Energy and Buildings
- Vol. 339
Open AccessFusion of thermal images and point clouds for enhanced wall temperature uniformity analysis in building environments
- Open Access
- 8 March 2024
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-4/W, 299-306
RANDOMISED COMPRESSION RATIOS FOR EFFECTIVE LARGE POINT CLOUD PROCESSING USING COMPRESSIVE SENSING
Effectively navigating the intricacies of extensive 3D point cloud data in urban environments poses a series of formidable computational challenges. These challenges are primarily attributed to the substantial data volume and density inherent in urban settings, the presence of noise and inconsistencies within the collected data, and the constraints imposed by limited transmission bandwidth, which consequently impact storage requirements. This paper introduces an innovative methodology for handling large point cloud datasets, based on concepts from Sparse Signal Processing (SSP), also known as compressive sensing. The proposed approach integrates well known geometric data manipulation such as the Octree to work hand in hand with SSP, as unified method. Through experimental validation using the Santiago Urban Dataset (SUD), we demonstrate the effectiveness of our method in achieving high data fidelity, as measured by Peak Signal-to-Noise Ratio (PSNR) values reaching approximately 60 dB even at substantial compression ratios. Comparative analysis against traditional methods, including those implemented in the widely used Point Cloud Library (PCL), reveals the superior performance of our proposed methodology. The results underscore the robustness and efficiency of our approach, positioning it as a compelling alternative for compressing extensive 3D point cloud data. This has crucial implications for diverse applications, ranging from city planning to rapid and effective disaster response.
- 8 March 2024
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-4/W, 299-306
Open AccessRANDOMISED COMPRESSION RATIOS FOR EFFECTIVE LARGE POINT CLOUD PROCESSING USING COMPRESSIVE SENSING
Effectively navigating the intricacies of extensive 3D point cloud data in urban environments poses a series of formidable computational challenges. These challenges are primarily attributed to the substantial data volume and density inherent in urban settings, the presence of noise and inconsistencies within the collected data, and the constraints imposed by limited transmission bandwidth, which consequently impact storage requirements. This paper introduces an innovative methodology for handling large point cloud datasets, based on concepts from Sparse Signal Processing (SSP), also known as compressive sensing. The proposed approach integrates well known geometric data manipulation such as the Octree to work hand in hand with SSP, as unified method. Through experimental validation using the Santiago Urban Dataset (SUD), we demonstrate the effectiveness of our method in achieving high data fidelity, as measured by Peak Signal-to-Noise Ratio (PSNR) values reaching approximately 60 dB even at substantial compression ratios. Comparative analysis against traditional methods, including those implemented in the widely used Point Cloud Library (PCL), reveals the superior performance of our proposed methodology. The results underscore the robustness and efficiency of our approach, positioning it as a compelling alternative for compressing extensive 3D point cloud data. This has crucial implications for diverse applications, ranging from city planning to rapid and effective disaster response.
- Open Access
- 5 December 2023
- Published by Copernicus GmbH in ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. X-1/W1-202, 17-23
EVALUATION AND COMPARISON OF DIFFERENT TIME OF FLIGHT CAMERAS FOR OUTDOOR APPLICATIONS
Time-of-Flight (ToF) cameras have gained prominence in robotics, augmented reality, and gesture recognition due to their costeffective direct measurement of 3D environments. However, their outdoor applications remain limited, mainly due to challenges like sunlight interference. Through systematic testing under challenging outdoor conditions, we aim to assess the suitability of ToF cameras, specifically Azure Kinect and Pmd Monstar, in smart city contexts and contribute to the state-of-the-art and future trends of 3D sensing technology. Our experiments focus on three high-reflectivity cases: license plates, reflective road marking paint on cement and asphalt boards, and traffic cones. Results indicated that Azure Kinect offered a longer measurement range but was more susceptible to flying pixels. Pmd Monstar provided more stable depth measurements and was less sensitive to flying pixels. Differences in performance were attributed to their modulation frequencies and the distinct approaches to handling low-confidence points. By addressing the identified limitations and challenges, researchers and engineers can enhance ToF camera capabilities, ultimately improving their performance and expanding their applicability in outdoor transportation, autonomous driving, and other related smart city fields.
- 5 December 2023
- Published by Copernicus GmbH in ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. X-1/W1-202, 17-23
Open AccessEVALUATION AND COMPARISON OF DIFFERENT TIME OF FLIGHT CAMERAS FOR OUTDOOR APPLICATIONS
Time-of-Flight (ToF) cameras have gained prominence in robotics, augmented reality, and gesture recognition due to their costeffective direct measurement of 3D environments. However, their outdoor applications remain limited, mainly due to challenges like sunlight interference. Through systematic testing under challenging outdoor conditions, we aim to assess the suitability of ToF cameras, specifically Azure Kinect and Pmd Monstar, in smart city contexts and contribute to the state-of-the-art and future trends of 3D sensing technology. Our experiments focus on three high-reflectivity cases: license plates, reflective road marking paint on cement and asphalt boards, and traffic cones. Results indicated that Azure Kinect offered a longer measurement range but was more susceptible to flying pixels. Pmd Monstar provided more stable depth measurements and was less sensitive to flying pixels. Differences in performance were attributed to their modulation frequencies and the distinct approaches to handling low-confidence points. By addressing the identified limitations and challenges, researchers and engineers can enhance ToF camera capabilities, ultimately improving their performance and expanding their applicability in outdoor transportation, autonomous driving, and other related smart city fields.
- Open Access
- 10 May 2023
- Published by Elsevier in International Journal of Applied Earth Observation and Geoinformation
- Vol. 120
A novel low-cost multi-sensor solution for pavement distress segmentation and characterization at night
- 10 May 2023
- Published by Elsevier in International Journal of Applied Earth Observation and Geoinformation
- Vol. 120
Open AccessA novel low-cost multi-sensor solution for pavement distress segmentation and characterization at night
- Top Cited PapersOpen Access
- 12 April 2023
- Published by Elsevier in Information Fusion
- Vol. 97
External multi-modal imaging sensor calibration for sensor fusion: A review
- 12 April 2023
- Published by Elsevier in Information Fusion
- Vol. 97
Top Cited PapersOpen AccessExternal multi-modal imaging sensor calibration for sensor fusion: A review
- 5 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. Five, 1-6
A novel license plate detection based Time-To-Collision calculation for forward collision warning using Azure Kinect
Forward Collision Warning (FCW) system constantly measures the relative position of the vehicle ahead and then predicts collisions. This paper proposes a new cost-effective and computationally efficient FCW method that uses a time-of-flight (ToF) camera to measure relevant distances to the front vehicle based on license plate detection. First, a Yolo V7 model is used to detect license plates to identify vehicles in front of the ego vehicle. Second, the distance between the front vehicle and the ego vehicle is determined by analyzing the captured depth map by the time-of-flight camera. In addition, the relative speed of the vehicle can be calculated by the direct distance change between the license plate and the camera between two consecutive frames. With a processing speed of 25–30 frames per second, the proposed FCW system is capable of determining relative distances and speeds within 26 meters in the real-time.
- 5 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. Five, 1-6
A novel license plate detection based Time-To-Collision calculation for forward collision warning using Azure Kinect
Forward Collision Warning (FCW) system constantly measures the relative position of the vehicle ahead and then predicts collisions. This paper proposes a new cost-effective and computationally efficient FCW method that uses a time-of-flight (ToF) camera to measure relevant distances to the front vehicle based on license plate detection. First, a Yolo V7 model is used to detect license plates to identify vehicles in front of the ego vehicle. Second, the distance between the front vehicle and the ego vehicle is determined by analyzing the captured depth map by the time-of-flight camera. In addition, the relative speed of the vehicle can be calculated by the direct distance change between the license plate and the camera between two consecutive frames. With a processing speed of 25–30 frames per second, the proposed FCW system is capable of determining relative distances and speeds within 26 meters in the real-time.