Miriam Latsch
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Miriam Latsch has a total of 61 co-authors. Here are the top co-authors by number of shared publications:
- Andreas Richter
Institute of Environmental Physics, University of Bremen
18 shared publications - John Phillip Burrows
Institute of Environmental Physics, University of Bremen, Bremen, Germany
17 shared publications Hartmut Bösch
11 shared publications- Tim Bösch
Institute of Environmental Physics, University of Bremen, Otto-Hahn-Allee 1, 28359 Bremen, Germany
7 shared publications Bianca Zilker
Institute of Environmental Physics, University of Bremen
6 shared publicationsHyunkee Hong
National Institute of Environmental Research
6 shared publications
Latest Publications
- Open Access
- 13 March 2026
- Published by Copernicus GmbH
Improved detection of global NO₂ signals from shipping using TROPOMI observations: advanced filtering and comparison with CAMS
Shipping is an important source of atmospheric NOx worldwide, negatively affecting marine environments and human health. For decades, some of the busiest shipping lanes have been tracked by satellites from space. With TROPOMI aboard the Sentinel 5-Precursor (S5P), the potential for detecting ship emissions has increased due to its low noise and high spatial resolution of 5.5 x 3.5 km2. Previous studies have demonstrated that even individual ship plumes can be identified from TROPOMI data.In this study, we use TROPOMI tropospheric NO2 slant columns (tSCDs) to qualitatively identify global shipping routes. Advanced preprocessing techniques, including iterative high-pass and Fourier filtering, markedly improve the detection of shipping lanes, revealing many previously undetectable routes. The impact of high-pass filter box sizes is analyzed, demonstrating that smaller sizes enhance the visibility of narrow shipping features, whereas larger box sizes increase overall NO2 signals. In addition, various flagging criteria are investigated that affect the distribution of the NO2 signal, highlighting the critical importance of careful selection for accurate emission monitoring. The filtered TROPOMI NO2 tSCDs over oceans show a strong correlation with shipping activities, as confirmed by comparison with the CAMS-GLOB-SHIP inventory, and reveal unknown shipping routes. TROPOMI also effectively captures NO2 signals from offshore oil and gas platforms. In the next step, filtered TROPOMI tropospheric NO2 vertical columns are compared with those from the CAMS global model. While both datasets show consistent NO2 enhancements along major shipping lanes, the CAMS NO2 values are systematically higher than the TROPOMI measurements.This study demonstrates the potential of advanced filtering techniques applied to TROPOMI observations to detect as many global NO₂ signals from shipping as possible. It contributes to the ongoing progress of satellite remote sensing of ship emissions.
- 13 March 2026
- Published by Copernicus GmbH
Open AccessImproved detection of global NO₂ signals from shipping using TROPOMI observations: advanced filtering and comparison with CAMS
Shipping is an important source of atmospheric NOx worldwide, negatively affecting marine environments and human health. For decades, some of the busiest shipping lanes have been tracked by satellites from space. With TROPOMI aboard the Sentinel 5-Precursor (S5P), the potential for detecting ship emissions has increased due to its low noise and high spatial resolution of 5.5 x 3.5 km2. Previous studies have demonstrated that even individual ship plumes can be identified from TROPOMI data.In this study, we use TROPOMI tropospheric NO2 slant columns (tSCDs) to qualitatively identify global shipping routes. Advanced preprocessing techniques, including iterative high-pass and Fourier filtering, markedly improve the detection of shipping lanes, revealing many previously undetectable routes. The impact of high-pass filter box sizes is analyzed, demonstrating that smaller sizes enhance the visibility of narrow shipping features, whereas larger box sizes increase overall NO2 signals. In addition, various flagging criteria are investigated that affect the distribution of the NO2 signal, highlighting the critical importance of careful selection for accurate emission monitoring. The filtered TROPOMI NO2 tSCDs over oceans show a strong correlation with shipping activities, as confirmed by comparison with the CAMS-GLOB-SHIP inventory, and reveal unknown shipping routes. TROPOMI also effectively captures NO2 signals from offshore oil and gas platforms. In the next step, filtered TROPOMI tropospheric NO2 vertical columns are compared with those from the CAMS global model. While both datasets show consistent NO2 enhancements along major shipping lanes, the CAMS NO2 values are systematically higher than the TROPOMI measurements.This study demonstrates the potential of advanced filtering techniques applied to TROPOMI observations to detect as many global NO₂ signals from shipping as possible. It contributes to the ongoing progress of satellite remote sensing of ship emissions.
- Open Access
- 13 January 2026
- Published by Wiley in Limnology and Oceanography Letters
- Vol. 11 (1)
Nitric oxide supersaturation in the surface waters of the oligotrophic Atlantic Ocean
Atmospheric nitric oxide (NO) is a pollutant and climate‐relevant trace gas. Dissolved NO accumulates in the surface ocean and therefore the ocean is a natural source of atmospheric NO. It is generally assumed that NO in the surface ocean is produced photochemically from nitrite (NO 2 − ). Here, we present the first dissolved NO measurements in the oligotrophic North Atlantic Ocean during an east‐to‐west transect (December 2021/January 2022). NO concentrations and mean saturations ranged from 9.4 to 48.2 pM and 10,355% to 19,484%, respectively, indicating that the study site was indeed a significant source of atmospheric NO despite extremely low NO 2 − concentrations. NO concentrations correlated significantly with phytoplankton pigment concentrations, indicating that NO variability may be influenced by phytoplankton‐related processes rather than photochemical pathways alone. These findings highlight the need to further investigate the production mechanism of NO in nutrient‐poor oceanic environments.
- 13 January 2026
- Published by Wiley in Limnology and Oceanography Letters
- Vol. 11 (1)
Open AccessNitric oxide supersaturation in the surface waters of the oligotrophic Atlantic Ocean
Atmospheric nitric oxide (NO) is a pollutant and climate‐relevant trace gas. Dissolved NO accumulates in the surface ocean and therefore the ocean is a natural source of atmospheric NO. It is generally assumed that NO in the surface ocean is produced photochemically from nitrite (NO 2 − ). Here, we present the first dissolved NO measurements in the oligotrophic North Atlantic Ocean during an east‐to‐west transect (December 2021/January 2022). NO concentrations and mean saturations ranged from 9.4 to 48.2 pM and 10,355% to 19,484%, respectively, indicating that the study site was indeed a significant source of atmospheric NO despite extremely low NO 2 − concentrations. NO concentrations correlated significantly with phytoplankton pigment concentrations, indicating that NO variability may be influenced by phytoplankton‐related processes rather than photochemical pathways alone. These findings highlight the need to further investigate the production mechanism of NO in nutrient‐poor oceanic environments.
- Open Access
- 10 December 2025
- Published by Taylor & Francis in GIScience & Remote Sensing
- Vol. 62 (1)
Comparison of GEMS v3.0 tropospheric NO 2 columns with ground-based DOAS instruments in Ulsan
- 10 December 2025
- Published by Taylor & Francis in GIScience & Remote Sensing
- Vol. 62 (1)
Open AccessComparison of GEMS v3.0 tropospheric NO 2 columns with ground-based DOAS instruments in Ulsan
- Open Access
- 10 September 2025
- Published by Copernicus GmbH in Atmospheric Measurement Techniques
- Vol. 18 (17) , 4373-4395
Improved detection of global NO2 signals from shipping in Sentinel-5P TROPOMI data
Shipping is an important source of nitrogen oxide (NOx) emissions worldwide, contributing to air pollution and negatively affecting marine environments, ecosystems, and biodiversity. TROPOMI (TROPOspheric Monitoring Instrument) on board the Sentinel-5 Precursor (S5P) has significantly enhanced the ability to detect ship emissions from space due to its low measurement noise levels and high spatial resolution of 5.5×3.5 km2 at nadir. This study uses the TROPOMI tropospheric NO2 slant column density (tSCD) to identify global shipping routes qualitatively. Preprocessing techniques, including iterative high-pass and Fourier filtering, markedly improve the detection of shipping lanes, revealing previously undetectable routes. Our analysis examines the impact of high-pass-filter box sizes, demonstrating that smaller sizes enhance the visibility of narrow shipping features, whereas larger box sizes increase overall NO2 signals. Additionally, we investigate various flagging criteria that affect NO2 signal distribution, highlighting the critical importance of careful selection for accurate emission monitoring. Filtered TROPOMI NO2 tSCDs over oceans show a strong correlation with shipping activities, as confirmed by comparison with the CAMS-GLOB-SHIP (Copernicus Atmospheric Monitoring Service for Global Shipping) inventory, and also reveal unknown shipping routes in regions such as the Bering Sea. Furthermore, TROPOMI effectively captures NO2 emissions from offshore oil and gas platforms, with NO2 hotspots in the TROPOMI data aligning well with locations of offshore installations listed in the OSPAR (Oslo and Paris Commission) and BOEM (Bureau of Ocean Energy Management) inventories. Lastly, the filtered TROPOMI NO2 tropospheric vertical column densities (tVCDs) are compared with the high-pass-filtered NO2 tVCDs from the CAMS (Copernicus Atmospheric Monitoring Service) model, which has a coarse spatial resolution of 0.4°. While both datasets effectively identify global shipping lanes, the high-pass-filtered CAMS NO2 tVCDs are significantly higher than the filtered TROPOMI NO2 tVCDs in the North Atlantic and strongly depend on the masking threshold in the high-pass filtering method in the South Atlantic Ocean.
- 10 September 2025
- Published by Copernicus GmbH in Atmospheric Measurement Techniques
- Vol. 18 (17) , 4373-4395
Open AccessImproved detection of global NO2 signals from shipping in Sentinel-5P TROPOMI data
Shipping is an important source of nitrogen oxide (NOx) emissions worldwide, contributing to air pollution and negatively affecting marine environments, ecosystems, and biodiversity. TROPOMI (TROPOspheric Monitoring Instrument) on board the Sentinel-5 Precursor (S5P) has significantly enhanced the ability to detect ship emissions from space due to its low measurement noise levels and high spatial resolution of 5.5×3.5 km2 at nadir. This study uses the TROPOMI tropospheric NO2 slant column density (tSCD) to identify global shipping routes qualitatively. Preprocessing techniques, including iterative high-pass and Fourier filtering, markedly improve the detection of shipping lanes, revealing previously undetectable routes. Our analysis examines the impact of high-pass-filter box sizes, demonstrating that smaller sizes enhance the visibility of narrow shipping features, whereas larger box sizes increase overall NO2 signals. Additionally, we investigate various flagging criteria that affect NO2 signal distribution, highlighting the critical importance of careful selection for accurate emission monitoring. Filtered TROPOMI NO2 tSCDs over oceans show a strong correlation with shipping activities, as confirmed by comparison with the CAMS-GLOB-SHIP (Copernicus Atmospheric Monitoring Service for Global Shipping) inventory, and also reveal unknown shipping routes in regions such as the Bering Sea. Furthermore, TROPOMI effectively captures NO2 emissions from offshore oil and gas platforms, with NO2 hotspots in the TROPOMI data aligning well with locations of offshore installations listed in the OSPAR (Oslo and Paris Commission) and BOEM (Bureau of Ocean Energy Management) inventories. Lastly, the filtered TROPOMI NO2 tropospheric vertical column densities (tVCDs) are compared with the high-pass-filtered NO2 tVCDs from the CAMS (Copernicus Atmospheric Monitoring Service) model, which has a coarse spatial resolution of 0.4°. While both datasets effectively identify global shipping lanes, the high-pass-filtered CAMS NO2 tVCDs are significantly higher than the filtered TROPOMI NO2 tVCDs in the North Atlantic and strongly depend on the masking threshold in the high-pass filtering method in the South Atlantic Ocean.
- Open Access
- 2 June 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-30
Reply on RC2
Shipping is an important source of nitrogen oxide (NOx) emissions worldwide, contributing to air pollution and negatively affecting marine environments, ecosystems, and biodiversity. TROPOMI (TROPOspheric Monitoring Instrument) aboard the Sentinel-5 Precursor (S5P) has significantly enhanced the ability to detect ship emissions from space due to its low measurement noise levels and high spatial resolution of 5.5 x 3.5 km2. This study uses the TROPOMI tropospheric NO2 slant column density (tSCD) to identify global shipping routes. Preprocessing techniques, including iterative high-pass and Fourier filtering, markedly improve the detection of shipping lanes, revealing previously undetectable routes. Our analysis examines the impact of high-pass filter box sizes, demonstrating that smaller sizes enhance the visibility of narrow shipping features, while larger box sizes increase overall NO2 signals. Additionally, we investigate various flagging criteria that affect NO2 signal distribution, highlighting the critical importance of careful selection for accurate emission monitoring. Filtered TROPOMI NO2 tSCDs over oceans show a strong correlation with shipping activities, as confirmed by comparison with the CAMS-GLOB-SHIP (Copernicus Atmospheric Monitoring Service for Global Shipping) inventory, and also reveal unknown shipping routes in regions such as the Bering Sea. Furthermore, TROPOMI effectively captures NO2 emissions from offshore oil and gas platforms, with NO2 hotspots in the TROPOMI data aligning well with locations of offshore installations listed in the OSPAR (Oslo and Paris Commission) and BOEM (Bureau of Ocean Energy Management) inventories. Lastly, the filtered TROPOMI NO2 tropospheric vertical column densities (tVCDs) are compared with the tVCDs from the CAMS (Copernicus Atmospheric Monitoring Service) model, which has a coarse spatial resolution of 0.4°. While both data sets effectively identify global shipping lanes, the CAMS NO2 tVCDs are significantly higher compared to the filtered TROPOMI tVCDs, with differences of up to a factor of 100 in the South Atlantic Ocean.
- 2 June 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-30
Open AccessReply on RC2
Shipping is an important source of nitrogen oxide (NOx) emissions worldwide, contributing to air pollution and negatively affecting marine environments, ecosystems, and biodiversity. TROPOMI (TROPOspheric Monitoring Instrument) aboard the Sentinel-5 Precursor (S5P) has significantly enhanced the ability to detect ship emissions from space due to its low measurement noise levels and high spatial resolution of 5.5 x 3.5 km2. This study uses the TROPOMI tropospheric NO2 slant column density (tSCD) to identify global shipping routes. Preprocessing techniques, including iterative high-pass and Fourier filtering, markedly improve the detection of shipping lanes, revealing previously undetectable routes. Our analysis examines the impact of high-pass filter box sizes, demonstrating that smaller sizes enhance the visibility of narrow shipping features, while larger box sizes increase overall NO2 signals. Additionally, we investigate various flagging criteria that affect NO2 signal distribution, highlighting the critical importance of careful selection for accurate emission monitoring. Filtered TROPOMI NO2 tSCDs over oceans show a strong correlation with shipping activities, as confirmed by comparison with the CAMS-GLOB-SHIP (Copernicus Atmospheric Monitoring Service for Global Shipping) inventory, and also reveal unknown shipping routes in regions such as the Bering Sea. Furthermore, TROPOMI effectively captures NO2 emissions from offshore oil and gas platforms, with NO2 hotspots in the TROPOMI data aligning well with locations of offshore installations listed in the OSPAR (Oslo and Paris Commission) and BOEM (Bureau of Ocean Energy Management) inventories. Lastly, the filtered TROPOMI NO2 tropospheric vertical column densities (tVCDs) are compared with the tVCDs from the CAMS (Copernicus Atmospheric Monitoring Service) model, which has a coarse spatial resolution of 0.4°. While both data sets effectively identify global shipping lanes, the CAMS NO2 tVCDs are significantly higher compared to the filtered TROPOMI tVCDs, with differences of up to a factor of 100 in the South Atlantic Ocean.
- Open Access
- 2 June 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-30
Reply on RC1
Shipping is an important source of nitrogen oxide (NOx) emissions worldwide, contributing to air pollution and negatively affecting marine environments, ecosystems, and biodiversity. TROPOMI (TROPOspheric Monitoring Instrument) aboard the Sentinel-5 Precursor (S5P) has significantly enhanced the ability to detect ship emissions from space due to its low measurement noise levels and high spatial resolution of 5.5 x 3.5 km2. This study uses the TROPOMI tropospheric NO2 slant column density (tSCD) to identify global shipping routes. Preprocessing techniques, including iterative high-pass and Fourier filtering, markedly improve the detection of shipping lanes, revealing previously undetectable routes. Our analysis examines the impact of high-pass filter box sizes, demonstrating that smaller sizes enhance the visibility of narrow shipping features, while larger box sizes increase overall NO2 signals. Additionally, we investigate various flagging criteria that affect NO2 signal distribution, highlighting the critical importance of careful selection for accurate emission monitoring. Filtered TROPOMI NO2 tSCDs over oceans show a strong correlation with shipping activities, as confirmed by comparison with the CAMS-GLOB-SHIP (Copernicus Atmospheric Monitoring Service for Global Shipping) inventory, and also reveal unknown shipping routes in regions such as the Bering Sea. Furthermore, TROPOMI effectively captures NO2 emissions from offshore oil and gas platforms, with NO2 hotspots in the TROPOMI data aligning well with locations of offshore installations listed in the OSPAR (Oslo and Paris Commission) and BOEM (Bureau of Ocean Energy Management) inventories. Lastly, the filtered TROPOMI NO2 tropospheric vertical column densities (tVCDs) are compared with the tVCDs from the CAMS (Copernicus Atmospheric Monitoring Service) model, which has a coarse spatial resolution of 0.4°. While both data sets effectively identify global shipping lanes, the CAMS NO2 tVCDs are significantly higher compared to the filtered TROPOMI tVCDs, with differences of up to a factor of 100 in the South Atlantic Ocean.
- 2 June 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-30
Open AccessReply on RC1
Shipping is an important source of nitrogen oxide (NOx) emissions worldwide, contributing to air pollution and negatively affecting marine environments, ecosystems, and biodiversity. TROPOMI (TROPOspheric Monitoring Instrument) aboard the Sentinel-5 Precursor (S5P) has significantly enhanced the ability to detect ship emissions from space due to its low measurement noise levels and high spatial resolution of 5.5 x 3.5 km2. This study uses the TROPOMI tropospheric NO2 slant column density (tSCD) to identify global shipping routes. Preprocessing techniques, including iterative high-pass and Fourier filtering, markedly improve the detection of shipping lanes, revealing previously undetectable routes. Our analysis examines the impact of high-pass filter box sizes, demonstrating that smaller sizes enhance the visibility of narrow shipping features, while larger box sizes increase overall NO2 signals. Additionally, we investigate various flagging criteria that affect NO2 signal distribution, highlighting the critical importance of careful selection for accurate emission monitoring. Filtered TROPOMI NO2 tSCDs over oceans show a strong correlation with shipping activities, as confirmed by comparison with the CAMS-GLOB-SHIP (Copernicus Atmospheric Monitoring Service for Global Shipping) inventory, and also reveal unknown shipping routes in regions such as the Bering Sea. Furthermore, TROPOMI effectively captures NO2 emissions from offshore oil and gas platforms, with NO2 hotspots in the TROPOMI data aligning well with locations of offshore installations listed in the OSPAR (Oslo and Paris Commission) and BOEM (Bureau of Ocean Energy Management) inventories. Lastly, the filtered TROPOMI NO2 tropospheric vertical column densities (tVCDs) are compared with the tVCDs from the CAMS (Copernicus Atmospheric Monitoring Service) model, which has a coarse spatial resolution of 0.4°. While both data sets effectively identify global shipping lanes, the CAMS NO2 tVCDs are significantly higher compared to the filtered TROPOMI tVCDs, with differences of up to a factor of 100 in the South Atlantic Ocean.
- Open Access
- 27 April 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-30
Comment on egusphere-2025-107
Shipping is an important source of nitrogen oxide (NOx) emissions worldwide, contributing to air pollution and negatively affecting marine environments, ecosystems, and biodiversity. TROPOMI (TROPOspheric Monitoring Instrument) aboard the Sentinel-5 Precursor (S5P) has significantly enhanced the ability to detect ship emissions from space due to its low measurement noise levels and high spatial resolution of 5.5 x 3.5 km2. This study uses the TROPOMI tropospheric NO2 slant column density (tSCD) to identify global shipping routes. Preprocessing techniques, including iterative high-pass and Fourier filtering, markedly improve the detection of shipping lanes, revealing previously undetectable routes. Our analysis examines the impact of high-pass filter box sizes, demonstrating that smaller sizes enhance the visibility of narrow shipping features, while larger box sizes increase overall NO2 signals. Additionally, we investigate various flagging criteria that affect NO2 signal distribution, highlighting the critical importance of careful selection for accurate emission monitoring. Filtered TROPOMI NO2 tSCDs over oceans show a strong correlation with shipping activities, as confirmed by comparison with the CAMS-GLOB-SHIP (Copernicus Atmospheric Monitoring Service for Global Shipping) inventory, and also reveal unknown shipping routes in regions such as the Bering Sea. Furthermore, TROPOMI effectively captures NO2 emissions from offshore oil and gas platforms, with NO2 hotspots in the TROPOMI data aligning well with locations of offshore installations listed in the OSPAR (Oslo and Paris Commission) and BOEM (Bureau of Ocean Energy Management) inventories. Lastly, the filtered TROPOMI NO2 tropospheric vertical column densities (tVCDs) are compared with the tVCDs from the CAMS (Copernicus Atmospheric Monitoring Service) model, which has a coarse spatial resolution of 0.4°. While both data sets effectively identify global shipping lanes, the CAMS NO2 tVCDs are significantly higher compared to the filtered TROPOMI tVCDs, with differences of up to a factor of 100 in the South Atlantic Ocean.
- 27 April 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-30
Open AccessComment on egusphere-2025-107
Shipping is an important source of nitrogen oxide (NOx) emissions worldwide, contributing to air pollution and negatively affecting marine environments, ecosystems, and biodiversity. TROPOMI (TROPOspheric Monitoring Instrument) aboard the Sentinel-5 Precursor (S5P) has significantly enhanced the ability to detect ship emissions from space due to its low measurement noise levels and high spatial resolution of 5.5 x 3.5 km2. This study uses the TROPOMI tropospheric NO2 slant column density (tSCD) to identify global shipping routes. Preprocessing techniques, including iterative high-pass and Fourier filtering, markedly improve the detection of shipping lanes, revealing previously undetectable routes. Our analysis examines the impact of high-pass filter box sizes, demonstrating that smaller sizes enhance the visibility of narrow shipping features, while larger box sizes increase overall NO2 signals. Additionally, we investigate various flagging criteria that affect NO2 signal distribution, highlighting the critical importance of careful selection for accurate emission monitoring. Filtered TROPOMI NO2 tSCDs over oceans show a strong correlation with shipping activities, as confirmed by comparison with the CAMS-GLOB-SHIP (Copernicus Atmospheric Monitoring Service for Global Shipping) inventory, and also reveal unknown shipping routes in regions such as the Bering Sea. Furthermore, TROPOMI effectively captures NO2 emissions from offshore oil and gas platforms, with NO2 hotspots in the TROPOMI data aligning well with locations of offshore installations listed in the OSPAR (Oslo and Paris Commission) and BOEM (Bureau of Ocean Energy Management) inventories. Lastly, the filtered TROPOMI NO2 tropospheric vertical column densities (tVCDs) are compared with the tVCDs from the CAMS (Copernicus Atmospheric Monitoring Service) model, which has a coarse spatial resolution of 0.4°. While both data sets effectively identify global shipping lanes, the CAMS NO2 tVCDs are significantly higher compared to the filtered TROPOMI tVCDs, with differences of up to a factor of 100 in the South Atlantic Ocean.
- Open Access
- 27 March 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-30
Comment on egusphere-2025-107
Shipping is an important source of nitrogen oxide (NOx) emissions worldwide, contributing to air pollution and negatively affecting marine environments, ecosystems, and biodiversity. TROPOMI (TROPOspheric Monitoring Instrument) aboard the Sentinel-5 Precursor (S5P) has significantly enhanced the ability to detect ship emissions from space due to its low measurement noise levels and high spatial resolution of 5.5 x 3.5 km2. This study uses the TROPOMI tropospheric NO2 slant column density (tSCD) to identify global shipping routes. Preprocessing techniques, including iterative high-pass and Fourier filtering, markedly improve the detection of shipping lanes, revealing previously undetectable routes. Our analysis examines the impact of high-pass filter box sizes, demonstrating that smaller sizes enhance the visibility of narrow shipping features, while larger box sizes increase overall NO2 signals. Additionally, we investigate various flagging criteria that affect NO2 signal distribution, highlighting the critical importance of careful selection for accurate emission monitoring. Filtered TROPOMI NO2 tSCDs over oceans show a strong correlation with shipping activities, as confirmed by comparison with the CAMS-GLOB-SHIP (Copernicus Atmospheric Monitoring Service for Global Shipping) inventory, and also reveal unknown shipping routes in regions such as the Bering Sea. Furthermore, TROPOMI effectively captures NO2 emissions from offshore oil and gas platforms, with NO2 hotspots in the TROPOMI data aligning well with locations of offshore installations listed in the OSPAR (Oslo and Paris Commission) and BOEM (Bureau of Ocean Energy Management) inventories. Lastly, the filtered TROPOMI NO2 tropospheric vertical column densities (tVCDs) are compared with the tVCDs from the CAMS (Copernicus Atmospheric Monitoring Service) model, which has a coarse spatial resolution of 0.4°. While both data sets effectively identify global shipping lanes, the CAMS NO2 tVCDs are significantly higher compared to the filtered TROPOMI tVCDs, with differences of up to a factor of 100 in the South Atlantic Ocean.
- 27 March 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-30
Open AccessComment on egusphere-2025-107
Shipping is an important source of nitrogen oxide (NOx) emissions worldwide, contributing to air pollution and negatively affecting marine environments, ecosystems, and biodiversity. TROPOMI (TROPOspheric Monitoring Instrument) aboard the Sentinel-5 Precursor (S5P) has significantly enhanced the ability to detect ship emissions from space due to its low measurement noise levels and high spatial resolution of 5.5 x 3.5 km2. This study uses the TROPOMI tropospheric NO2 slant column density (tSCD) to identify global shipping routes. Preprocessing techniques, including iterative high-pass and Fourier filtering, markedly improve the detection of shipping lanes, revealing previously undetectable routes. Our analysis examines the impact of high-pass filter box sizes, demonstrating that smaller sizes enhance the visibility of narrow shipping features, while larger box sizes increase overall NO2 signals. Additionally, we investigate various flagging criteria that affect NO2 signal distribution, highlighting the critical importance of careful selection for accurate emission monitoring. Filtered TROPOMI NO2 tSCDs over oceans show a strong correlation with shipping activities, as confirmed by comparison with the CAMS-GLOB-SHIP (Copernicus Atmospheric Monitoring Service for Global Shipping) inventory, and also reveal unknown shipping routes in regions such as the Bering Sea. Furthermore, TROPOMI effectively captures NO2 emissions from offshore oil and gas platforms, with NO2 hotspots in the TROPOMI data aligning well with locations of offshore installations listed in the OSPAR (Oslo and Paris Commission) and BOEM (Bureau of Ocean Energy Management) inventories. Lastly, the filtered TROPOMI NO2 tropospheric vertical column densities (tVCDs) are compared with the tVCDs from the CAMS (Copernicus Atmospheric Monitoring Service) model, which has a coarse spatial resolution of 0.4°. While both data sets effectively identify global shipping lanes, the CAMS NO2 tVCDs are significantly higher compared to the filtered TROPOMI tVCDs, with differences of up to a factor of 100 in the South Atlantic Ocean.
- Open Access
- 5 March 2025
- Published by Copernicus GmbH in EGUsphere
- Vol. 2025, 1-30
Improved detection of global NOx emissions from shipping in Sentinel-5P TROPOMI data
Shipping is an important source of nitrogen oxide (NOx) emissions worldwide, contributing to air pollution and negatively affecting marine environments, ecosystems, and biodiversity. TROPOMI (TROPOspheric Monitoring Instrument) aboard the Sentinel-5 Precursor (S5P) has significantly enhanced the ability to detect ship emissions from space due to its low measurement noise levels and high spatial resolution of 5.5 x 3.5 km2. This study uses the TROPOMI tropospheric NO2 slant column density (tSCD) to identify global shipping routes. Preprocessing techniques, including iterative high-pass and Fourier filtering, markedly improve the detection of shipping lanes, revealing previously undetectable routes. Our analysis examines the impact of high-pass filter box sizes, demonstrating that smaller sizes enhance the visibility of narrow shipping features, while larger box sizes increase overall NO2 signals. Additionally, we investigate various flagging criteria that affect NO2 signal distribution, highlighting the critical importance of careful selection for accurate emission monitoring. Filtered TROPOMI NO2 tSCDs over oceans show a strong correlation with shipping activities, as confirmed by comparison with the CAMS-GLOB-SHIP (Copernicus Atmospheric Monitoring Service for Global Shipping) inventory, and also reveal unknown shipping routes in regions such as the Bering Sea. Furthermore, TROPOMI effectively captures NO2 emissions from offshore oil and gas platforms, with NO2 hotspots in the TROPOMI data aligning well with locations of offshore installations listed in the OSPAR (Oslo and Paris Commission) and BOEM (Bureau of Ocean Energy Management) inventories. Lastly, the filtered TROPOMI NO2 tropospheric vertical column densities (tVCDs) are compared with the tVCDs from the CAMS (Copernicus Atmospheric Monitoring Service) model, which has a coarse spatial resolution of 0.4°. While both data sets effectively identify global shipping lanes, the CAMS NO2 tVCDs are significantly higher compared to the filtered TROPOMI tVCDs, with differences of up to a factor of 100 in the South Atlantic Ocean.
- 5 March 2025
- Published by Copernicus GmbH in EGUsphere
- Vol. 2025, 1-30
Open AccessImproved detection of global NOx emissions from shipping in Sentinel-5P TROPOMI data
Shipping is an important source of nitrogen oxide (NOx) emissions worldwide, contributing to air pollution and negatively affecting marine environments, ecosystems, and biodiversity. TROPOMI (TROPOspheric Monitoring Instrument) aboard the Sentinel-5 Precursor (S5P) has significantly enhanced the ability to detect ship emissions from space due to its low measurement noise levels and high spatial resolution of 5.5 x 3.5 km2. This study uses the TROPOMI tropospheric NO2 slant column density (tSCD) to identify global shipping routes. Preprocessing techniques, including iterative high-pass and Fourier filtering, markedly improve the detection of shipping lanes, revealing previously undetectable routes. Our analysis examines the impact of high-pass filter box sizes, demonstrating that smaller sizes enhance the visibility of narrow shipping features, while larger box sizes increase overall NO2 signals. Additionally, we investigate various flagging criteria that affect NO2 signal distribution, highlighting the critical importance of careful selection for accurate emission monitoring. Filtered TROPOMI NO2 tSCDs over oceans show a strong correlation with shipping activities, as confirmed by comparison with the CAMS-GLOB-SHIP (Copernicus Atmospheric Monitoring Service for Global Shipping) inventory, and also reveal unknown shipping routes in regions such as the Bering Sea. Furthermore, TROPOMI effectively captures NO2 emissions from offshore oil and gas platforms, with NO2 hotspots in the TROPOMI data aligning well with locations of offshore installations listed in the OSPAR (Oslo and Paris Commission) and BOEM (Bureau of Ocean Energy Management) inventories. Lastly, the filtered TROPOMI NO2 tropospheric vertical column densities (tVCDs) are compared with the tVCDs from the CAMS (Copernicus Atmospheric Monitoring Service) model, which has a coarse spatial resolution of 0.4°. While both data sets effectively identify global shipping lanes, the CAMS NO2 tVCDs are significantly higher compared to the filtered TROPOMI tVCDs, with differences of up to a factor of 100 in the South Atlantic Ocean.
- Open Access
- 30 October 2024
- Published by Copernicus GmbH in Atmospheric Measurement Techniques
- Vol. 17 (21) , 6315-6344
Validation of GEMS tropospheric NO2 columns and their diurnal variation with ground-based DOAS measurements
Instruments for air quality observations on geostationary satellites provide multiple observations per day and allow for the analysis of the diurnal variation in important air pollutants such as nitrogen dioxide (NO2). The South Korean instrument GEMS (Geostationary Environmental Monitoring Spectrometer), launched in February 2020, is the first geostationary instrument that is able to observe the diurnal variation in NO2. The measurements have a spatial resolution of 3.5 km × 8 km and cover a large part of Asia. This study compares 1 year of tropospheric NO2 vertical column density (VCD) observations from the operational GEMS L2 product, the scientific GEMS IUP-UB (Institute of Environmental Physics at the University of Bremen) product, the operational TROPOspheric Monitoring Instrument (TROPOMI) product, and ground-based differential optical absorption spectroscopy (DOAS) measurements in South Korea. The GEMS L2 tropospheric NO2 VCDs overestimate the ground-based tropospheric NO2 VCDs with a median relative difference of +61 % and a correlation coefficient of 0.76. The median relative difference is −2 % for the GEMS IUP-UB product and −16 % for the TROPOMI product, with correlation coefficients of 0.83 and 0.89, respectively. The scatter in the GEMS products can be reduced when observations are limited to the TROPOMI overpass time. Diurnal variations in tropospheric NO2 VCDs differ by the pollution level of the analyzed site but with good agreement between the GEMS IUP-UB and ground-based observations. Low-pollution sites show weak or almost no diurnal variation. In summer, the polluted sites show a minimum around noon, indicating the large influence of photochemical loss. Most variation is seen in spring and autumn, with increasing NO2 in the morning, a maximum close to noon, and a decrease towards the afternoon. Winter observations show rather flat or slightly decreasing NO2 throughout the day. Winter observations under low-wind-speed conditions at high-pollution sites show enhancements of NO2 throughout the day. This indicates that under calm conditions, dilution and the less effective chemical loss in winter do not balance the accumulating emissions. Diurnal variation observed at a low-pollution site follows seasonal wind patterns. A weekday–weekend effect analysis shows good agreement between the different products. However, the GEMS L2 product, while agreeing with the other data sets on weekdays, shows significantly less reduction on weekends. The influence of the stratospheric contribution and the surface reflectivity product on the satellite tropospheric NO2 VCD products is investigated. While the TM5 model's stratospheric VCDs, used in the TROPOMI product, are too high, resulting in tropospheric NO2 VCDs that are too low and even negative, when used in the GEMS IUP-UB retrieval, the GEMS L2 stratospheric VCD is too low. Surface reflectivity comparisons indicate that the GEMS L2 reflectivity makes a large contribution to the observed overestimation and scatter.
- 30 October 2024
- Published by Copernicus GmbH in Atmospheric Measurement Techniques
- Vol. 17 (21) , 6315-6344
Open AccessValidation of GEMS tropospheric NO2 columns and their diurnal variation with ground-based DOAS measurements
Instruments for air quality observations on geostationary satellites provide multiple observations per day and allow for the analysis of the diurnal variation in important air pollutants such as nitrogen dioxide (NO2). The South Korean instrument GEMS (Geostationary Environmental Monitoring Spectrometer), launched in February 2020, is the first geostationary instrument that is able to observe the diurnal variation in NO2. The measurements have a spatial resolution of 3.5 km × 8 km and cover a large part of Asia. This study compares 1 year of tropospheric NO2 vertical column density (VCD) observations from the operational GEMS L2 product, the scientific GEMS IUP-UB (Institute of Environmental Physics at the University of Bremen) product, the operational TROPOspheric Monitoring Instrument (TROPOMI) product, and ground-based differential optical absorption spectroscopy (DOAS) measurements in South Korea. The GEMS L2 tropospheric NO2 VCDs overestimate the ground-based tropospheric NO2 VCDs with a median relative difference of +61 % and a correlation coefficient of 0.76. The median relative difference is −2 % for the GEMS IUP-UB product and −16 % for the TROPOMI product, with correlation coefficients of 0.83 and 0.89, respectively. The scatter in the GEMS products can be reduced when observations are limited to the TROPOMI overpass time. Diurnal variations in tropospheric NO2 VCDs differ by the pollution level of the analyzed site but with good agreement between the GEMS IUP-UB and ground-based observations. Low-pollution sites show weak or almost no diurnal variation. In summer, the polluted sites show a minimum around noon, indicating the large influence of photochemical loss. Most variation is seen in spring and autumn, with increasing NO2 in the morning, a maximum close to noon, and a decrease towards the afternoon. Winter observations show rather flat or slightly decreasing NO2 throughout the day. Winter observations under low-wind-speed conditions at high-pollution sites show enhancements of NO2 throughout the day. This indicates that under calm conditions, dilution and the less effective chemical loss in winter do not balance the accumulating emissions. Diurnal variation observed at a low-pollution site follows seasonal wind patterns. A weekday–weekend effect analysis shows good agreement between the different products. However, the GEMS L2 product, while agreeing with the other data sets on weekdays, shows significantly less reduction on weekends. The influence of the stratospheric contribution and the surface reflectivity product on the satellite tropospheric NO2 VCD products is investigated. While the TM5 model's stratospheric VCDs, used in the TROPOMI product, are too high, resulting in tropospheric NO2 VCDs that are too low and even negative, when used in the GEMS IUP-UB retrieval, the GEMS L2 stratospheric VCD is too low. Surface reflectivity comparisons indicate that the GEMS L2 reflectivity makes a large contribution to the observed overestimation and scatter.