Chen Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Chen Chen has a total of 64 co-authors. Here are the top co-authors by number of shared publications:
- Junqi Xu
Tongji University
10 shared publications - Changhui Jiang
Nanjing University of Aeronautics and Astronautics
5 shared publications - Juha Hyyppä
Department of Remote Sensing and Photogrammetry, Finnish Geospatial Research Institute, Vuorimiehentie 5, 02150 Espoo, Finland
5 shared publications Junqi Xu
Tongji University
5 shared publications- Yougang Sun
Tongji University
5 shared publications - Yuwei Chen
Advanced Laser Technology Laboratory of Anhui Province, Hefei, 230000, China; Hangzhou Institute of Advanced Studies, University of Chinese Academy of Science, Hangzhou, 310024, China
5 shared publications
Latest Publications
- 29 October 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit
Coupling analysis and disturbance suppression of multiple electromagnets in maglev trains based on an error compensation network
The levitation system is essential for non-contact operation in maglev trains, with control performance being critical for stable long-term operation. In low-speed maglev trains with electromagnetic suspension (EMS), the coupling of multiple electromagnet modules enhances coordination but also transmits coupled vibrations, requiring vibration suppression for stability. This paper develops the dynamic model of a two-point levitation system based on the single-point levitation system of low-speed EMS maglev trains and analyzes its coupling characteristics. A Linear Active Disturbance Rejection Control (LADRC) levitation controller is designed for disturbance suppression, with a cross-coupling compensation loop to improve synchronization. A Takagi-Sugeno (T-S) fuzzy neural network-based synchronous error compensator is introduced to reduce gap deviation and ensure synchronization of electromagnets. Experimental validation shows that with the LADRC controller, the gap deviation stays within 0.15 mm, while the error compensator reduces it to under 0.1 mm, improving synchronization and preventing performance degradation from a fixed cross-coupling coefficient.
- 29 October 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit
Coupling analysis and disturbance suppression of multiple electromagnets in maglev trains based on an error compensation network
The levitation system is essential for non-contact operation in maglev trains, with control performance being critical for stable long-term operation. In low-speed maglev trains with electromagnetic suspension (EMS), the coupling of multiple electromagnet modules enhances coordination but also transmits coupled vibrations, requiring vibration suppression for stability. This paper develops the dynamic model of a two-point levitation system based on the single-point levitation system of low-speed EMS maglev trains and analyzes its coupling characteristics. A Linear Active Disturbance Rejection Control (LADRC) levitation controller is designed for disturbance suppression, with a cross-coupling compensation loop to improve synchronization. A Takagi-Sugeno (T-S) fuzzy neural network-based synchronous error compensator is introduced to reduce gap deviation and ensure synchronization of electromagnets. Experimental validation shows that with the LADRC controller, the gap deviation stays within 0.15 mm, while the error compensator reduces it to under 0.1 mm, improving synchronization and preventing performance degradation from a fixed cross-coupling coefficient.
- 2 September 2026
- Published by Springer Nature
- p. 283-296
Predictor-Compensated ADRC for Levitation System of High-Speed Maglev Trains with Input Time Delay
- 2 September 2026
- Published by Springer Nature
- p. 283-296
Predictor-Compensated ADRC for Levitation System of High-Speed Maglev Trains with Input Time Delay
- Open Access
Electromagnetic Analysis and Optimization Design of a Composite Anti-Time-Delay Current Loop for High-Speed Maglev Suspension System
The suspension system of high-speed maglev trains has composite time-delay factors, such as inductance delay and control circuit latency, which lead to a decrease in the tracking and robustness of the current control loop. Based on the study of electromagnetic characteristics of suspension systems, this paper proposes a composite anti-time-delay current loop based on adaptive parameter optimization. First, a finite element analysis model of the suspension electromagnet is constructed to analyze the changes in suspension force and inductance of the suspension electromagnet. A self-tuning PI current loop is constructed to achieve time-varying parameter matching. Second, to tackle the inherent time delays and disturbances in the control loop, a predictive PI control algorithm combined with an extended state observer (ESO) is introduced, which effectively estimates and compensates for disturbances and phase lags. Furthermore, a parameter optimization strategy based on the adaptive differential evolution (ADE) algorithm is proposed to address the difficulties in current loop tuning. The results demonstrate that compared to traditional current loop strategies, the dynamic performance of the designed composite anti-time-delay current loop is significantly improved, enhancing the current following control capability of the suspension system under complex operating conditions.
Open AccessElectromagnetic Analysis and Optimization Design of a Composite Anti-Time-Delay Current Loop for High-Speed Maglev Suspension System
The suspension system of high-speed maglev trains has composite time-delay factors, such as inductance delay and control circuit latency, which lead to a decrease in the tracking and robustness of the current control loop. Based on the study of electromagnetic characteristics of suspension systems, this paper proposes a composite anti-time-delay current loop based on adaptive parameter optimization. First, a finite element analysis model of the suspension electromagnet is constructed to analyze the changes in suspension force and inductance of the suspension electromagnet. A self-tuning PI current loop is constructed to achieve time-varying parameter matching. Second, to tackle the inherent time delays and disturbances in the control loop, a predictive PI control algorithm combined with an extended state observer (ESO) is introduced, which effectively estimates and compensates for disturbances and phase lags. Furthermore, a parameter optimization strategy based on the adaptive differential evolution (ADE) algorithm is proposed to address the difficulties in current loop tuning. The results demonstrate that compared to traditional current loop strategies, the dynamic performance of the designed composite anti-time-delay current loop is significantly improved, enhancing the current following control capability of the suspension system under complex operating conditions.
- 9 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75 (00189456) , 1-13
Research on Electromagnetic Suspension Vibration Isolation Experiment and Performance Optimization Under Composite Excitation
As the core system for vibration isolation among multiple equipment, the equipment support system serves as one of the key factors ensuring effective vibration isolation under complex excitations. Considering the limitations of passive vibration isolation methods, such as narrow adaptive frequency bands and low isolation efficiency, this paper aims to introduce electromagnetic suspension technology into the equipment support system for active vibration isolation. Firstly, based on the design concept of electromagnetic suspension vibration isolation, the full-scale frame structure design is completed, and the rationality of the structural design is analyzed with vibration theory; Secondly, a single point suspension system and a three degree of freedom dynamic model are established. Based on this model, the suspension control system is designed and its control performance under different parameters was analyzed using a PID control algorithm; Thirdly, based on the existing experimental conditions, a scaled prototype of the magnetically suspended vibration isolation platform is built under available experimental conditions, and the vibration isolation performance under PID control is systematically evaluated. Finally, a Dual-Mode MPC control algorithm is introduced to optimize the controller, and its performance is validated. The research results indicate that the electromagnetic suspension isolation method under PID control has better isolation performance compared to passive isolation, but there are shortcomings in robustness and parameter optimization, which need further optimization; The proposed Dual-Mode MPC control method further optimizes system performance and exhibits better isolation performance under composite excitation.
- 9 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75 (00189456) , 1-13
Research on Electromagnetic Suspension Vibration Isolation Experiment and Performance Optimization Under Composite Excitation
As the core system for vibration isolation among multiple equipment, the equipment support system serves as one of the key factors ensuring effective vibration isolation under complex excitations. Considering the limitations of passive vibration isolation methods, such as narrow adaptive frequency bands and low isolation efficiency, this paper aims to introduce electromagnetic suspension technology into the equipment support system for active vibration isolation. Firstly, based on the design concept of electromagnetic suspension vibration isolation, the full-scale frame structure design is completed, and the rationality of the structural design is analyzed with vibration theory; Secondly, a single point suspension system and a three degree of freedom dynamic model are established. Based on this model, the suspension control system is designed and its control performance under different parameters was analyzed using a PID control algorithm; Thirdly, based on the existing experimental conditions, a scaled prototype of the magnetically suspended vibration isolation platform is built under available experimental conditions, and the vibration isolation performance under PID control is systematically evaluated. Finally, a Dual-Mode MPC control algorithm is introduced to optimize the controller, and its performance is validated. The research results indicate that the electromagnetic suspension isolation method under PID control has better isolation performance compared to passive isolation, but there are shortcomings in robustness and parameter optimization, which need further optimization; The proposed Dual-Mode MPC control method further optimizes system performance and exhibits better isolation performance under composite excitation.
- Open Access
Reinforcement Learning-Based Super-Twisting Sliding Mode Control for Maglev Guidance System
The high-speed Electromagnetic Suspension (EMS) maglev guidance system exhibits inherent characteristics of strong nonlinearity, parameter time-variation, and complex external disturbances. To further optimize and improve the control performance of the guidance system for high-speed maglev trains, a novel intelligent control strategy that integrates the Deep Deterministic Policy Gradient (DDPG) algorithm with Super-Twisting Sliding Mode Control (STSMC) is proposed. Focusing on a single-ended guidance unit with differential control of dual electromagnets, an STSMC controller is first designed based on a cascaded control framework. To overcome the limitation of offline parameter tuning in dynamic operational conditions, a reinforcement learning optimization framework employing DDPG is introduced. A multi-objective hybrid reward function is formulated, incorporating error convergence, sliding mode stability, and chattering suppression, thereby realizing the online self-tuning of core STSMC parameters via real-time interaction between the agent and the environment. Numerical simulations under typical disturbance conditions verify that the proposed DDPG-STSMC controller significantly reduces the amplitude of guidance gap variation and accelerates dynamic recovery compared to conventional PID control. Its superior performance in disturbance rejection, control accuracy, and operational adaptability is validated. This study, conducted through high-fidelity numerical simulations based on actual system parameters, provides a robust theoretical foundation for subsequent hardware-in-the-loop (HIL) experimentation.
Open AccessReinforcement Learning-Based Super-Twisting Sliding Mode Control for Maglev Guidance System
The high-speed Electromagnetic Suspension (EMS) maglev guidance system exhibits inherent characteristics of strong nonlinearity, parameter time-variation, and complex external disturbances. To further optimize and improve the control performance of the guidance system for high-speed maglev trains, a novel intelligent control strategy that integrates the Deep Deterministic Policy Gradient (DDPG) algorithm with Super-Twisting Sliding Mode Control (STSMC) is proposed. Focusing on a single-ended guidance unit with differential control of dual electromagnets, an STSMC controller is first designed based on a cascaded control framework. To overcome the limitation of offline parameter tuning in dynamic operational conditions, a reinforcement learning optimization framework employing DDPG is introduced. A multi-objective hybrid reward function is formulated, incorporating error convergence, sliding mode stability, and chattering suppression, thereby realizing the online self-tuning of core STSMC parameters via real-time interaction between the agent and the environment. Numerical simulations under typical disturbance conditions verify that the proposed DDPG-STSMC controller significantly reduces the amplitude of guidance gap variation and accelerates dynamic recovery compared to conventional PID control. Its superior performance in disturbance rejection, control accuracy, and operational adaptability is validated. This study, conducted through high-fidelity numerical simulations based on actual system parameters, provides a robust theoretical foundation for subsequent hardware-in-the-loop (HIL) experimentation.
- 27 February 2026
- Published by SAGE Publications in Journal of Vibration and Control
Model-driven intelligent graded evaluation of high-speed maglev track irregularity and its application validation
Track irregularities in high-speed maglev systems are critical factors influencing levitation stability and ride quality. Conventional evaluation methods struggle to simultaneously account for frequency-domain characteristics and engineering randomness, limiting the realization of intelligent perception and automated, scientifically grounded assessment of track conditions. To fill this gap, this study proposes a modeling and graded evaluation framework for track irregularities based on multi-category deviation superposition. A hierarchical superposition model is established to represent the coupled deformation of track girders and stator cores, and a random parameter assignment strategy is introduced to simulate geometric fluctuations under multi-source uncertainties. On this basis, a five-level evaluation criterion is developed using PSD confidence intervals, forming a probabilistic grading system suitable for automated track state inspection. The neighborhood uniform sampling Bootstrap approach is employed to reconstruct PSD statistical intervals from small-sample field measurements, confirming the consistency of the model and the rationality of the evaluation boundaries. Application studies demonstrate that the method can automatically and accurately identify irregularity degradation across different wavelengths on the Shanghai Maglev Line, and its comparative evaluation with the German TVE test line highlights strong cross-line applicability. The proposed track state intelligent perception and graded evaluation framework provides a scientific basis for managing irregularities and suppressing vibrations in high-speed maglev systems, supporting stable operation and improved ride quality under demanding dynamic conditions.
- 27 February 2026
- Published by SAGE Publications in Journal of Vibration and Control
Model-driven intelligent graded evaluation of high-speed maglev track irregularity and its application validation
Track irregularities in high-speed maglev systems are critical factors influencing levitation stability and ride quality. Conventional evaluation methods struggle to simultaneously account for frequency-domain characteristics and engineering randomness, limiting the realization of intelligent perception and automated, scientifically grounded assessment of track conditions. To fill this gap, this study proposes a modeling and graded evaluation framework for track irregularities based on multi-category deviation superposition. A hierarchical superposition model is established to represent the coupled deformation of track girders and stator cores, and a random parameter assignment strategy is introduced to simulate geometric fluctuations under multi-source uncertainties. On this basis, a five-level evaluation criterion is developed using PSD confidence intervals, forming a probabilistic grading system suitable for automated track state inspection. The neighborhood uniform sampling Bootstrap approach is employed to reconstruct PSD statistical intervals from small-sample field measurements, confirming the consistency of the model and the rationality of the evaluation boundaries. Application studies demonstrate that the method can automatically and accurately identify irregularity degradation across different wavelengths on the Shanghai Maglev Line, and its comparative evaluation with the German TVE test line highlights strong cross-line applicability. The proposed track state intelligent perception and graded evaluation framework provides a scientific basis for managing irregularities and suppressing vibrations in high-speed maglev systems, supporting stable operation and improved ride quality under demanding dynamic conditions.
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75 (00189456) , 1-17
Research on Influence of Eddy Current Effects Between Rails and Electromagnets in Maglev Vehicles Under Nonuniform Magnetic Fields
To address the attenuation of levitation force between the electromagnets and rails in maglev vehicles caused by high-speed operation, this study first analyzes the generation mechanism of eddy current effects (ECE) based on electromagnetic field theory. A high-precision surrogate model for air-gap magnetic field calculation is established, incorporating the actual topological structure of the levitation electromagnets. Building on this foundation, an analytical electromagnetic force model accounting for ECE in both rails and electromagnets is developed. This model enables efficient parametric analysis of eddy current influences and is directly applicable to inverse problems in electromagnet topology optimization. To address the challenges posed by ECE on the engineering application of speed increase in medium and low speed maglev vehicles, this paper analyzes the limitations of existing end-mounted levitation electromagnet structures. Based on the current balance optimization principle between front and rear suspension points, a non-dominated solution set for structural optimization parameters is derived, aiming to mitigate uneven load distribution and compensate for ECE. Dynamic simulation results demonstrate that the optimized electromagnet structure effectively compensates for ECE while simultaneously enhancing track compatibility at levitation points. Experimental results indicate that at 140 km/h, the currents at both front and rear levitation points of the end-mounted electromagnets reach a balanced state, remaining below the rated value of 35A. The outcomes of this study provide theoretical guidance for optimizing levitation systems in medium and low speed maglev vehicles at higher speed levels.
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75 (00189456) , 1-17
Research on Influence of Eddy Current Effects Between Rails and Electromagnets in Maglev Vehicles Under Nonuniform Magnetic Fields
To address the attenuation of levitation force between the electromagnets and rails in maglev vehicles caused by high-speed operation, this study first analyzes the generation mechanism of eddy current effects (ECE) based on electromagnetic field theory. A high-precision surrogate model for air-gap magnetic field calculation is established, incorporating the actual topological structure of the levitation electromagnets. Building on this foundation, an analytical electromagnetic force model accounting for ECE in both rails and electromagnets is developed. This model enables efficient parametric analysis of eddy current influences and is directly applicable to inverse problems in electromagnet topology optimization. To address the challenges posed by ECE on the engineering application of speed increase in medium and low speed maglev vehicles, this paper analyzes the limitations of existing end-mounted levitation electromagnet structures. Based on the current balance optimization principle between front and rear suspension points, a non-dominated solution set for structural optimization parameters is derived, aiming to mitigate uneven load distribution and compensate for ECE. Dynamic simulation results demonstrate that the optimized electromagnet structure effectively compensates for ECE while simultaneously enhancing track compatibility at levitation points. Experimental results indicate that at 140 km/h, the currents at both front and rear levitation points of the end-mounted electromagnets reach a balanced state, remaining below the rated value of 35A. The outcomes of this study provide theoretical guidance for optimizing levitation systems in medium and low speed maglev vehicles at higher speed levels.
- 16 October 2025
- Published by SAGE Publications in Journal of Vibration and Control
Dynamic analysis of high-speed maglev magnetic coupling and experimental study on vehicle-bridge characteristics
The unique electromagnetic suspension dynamics of maglev trains are fundamentally different from traditional wheel-rail interactions, posing key challenges to suspension stability control. This paper proposes a comprehensive vehicle-rail-bridge coupling dynamic model for studying the vertical dynamic behavior and suspension control performance of long stator maglev trains. This model can be used to analyze the vertical dynamics of carriage and suspension frames during high-speed operation. The main contributions include: simplifying the three degree of freedom dynamic model of maglev vehicles considering secondary suspension system forces and electromagnetic coupling; perform modal and static analysis on flexible guide rails with different spans (12 m, 18 m, 24 m) to reveal stiffness degradation and resonance risks related to spans; a joint simulation framework integrating MATLAB/Simulink and ADAMS is used to evaluate the dynamic response under different operating scenarios (20–600 km/h); conduct experimental verification using full-size maglev test vehicles and guide rails to demonstrate consistency between simulation and on-site data. The results indicate that the span of the track beam significantly affects the vertical deflection (maximum 2.7 mm for a 24 m span) and vibration characteristics. In addition, there is a problem of degraded control performance during high-speed operation (600 km per hour) under PID control. This study conducted an in-depth analysis of the suspension and vibration characteristics of high-speed maglev trains at different speeds and deflection to span ratios, providing reference for optimizing suspension control and track beam design in high-speed maglev systems.
- 16 October 2025
- Published by SAGE Publications in Journal of Vibration and Control
Dynamic analysis of high-speed maglev magnetic coupling and experimental study on vehicle-bridge characteristics
The unique electromagnetic suspension dynamics of maglev trains are fundamentally different from traditional wheel-rail interactions, posing key challenges to suspension stability control. This paper proposes a comprehensive vehicle-rail-bridge coupling dynamic model for studying the vertical dynamic behavior and suspension control performance of long stator maglev trains. This model can be used to analyze the vertical dynamics of carriage and suspension frames during high-speed operation. The main contributions include: simplifying the three degree of freedom dynamic model of maglev vehicles considering secondary suspension system forces and electromagnetic coupling; perform modal and static analysis on flexible guide rails with different spans (12 m, 18 m, 24 m) to reveal stiffness degradation and resonance risks related to spans; a joint simulation framework integrating MATLAB/Simulink and ADAMS is used to evaluate the dynamic response under different operating scenarios (20–600 km/h); conduct experimental verification using full-size maglev test vehicles and guide rails to demonstrate consistency between simulation and on-site data. The results indicate that the span of the track beam significantly affects the vertical deflection (maximum 2.7 mm for a 24 m span) and vibration characteristics. In addition, there is a problem of degraded control performance during high-speed operation (600 km per hour) under PID control. This study conducted an in-depth analysis of the suspension and vibration characteristics of high-speed maglev trains at different speeds and deflection to span ratios, providing reference for optimizing suspension control and track beam design in high-speed maglev systems.
- 17 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-11
Walking Gait Assisted Vector Tracking GNSS for Pedestrian Position
Vector Tracking (VT) is reported as a promising method to enhance Global Navigation Satellite System (GNSS) position accuracy in urban areas. Direct signal tracking parameters and navigation solutions estimation fully exploits the inherent relationship between the navigation solutions and signal tracking parameters, which brings advantages in improving GNSS performance under signal challenging environments, i.e., weak signals. In this paper, we firstly investigated VT based pedestrian position, and we proposed walking gaits aided VT (WG-VT) method for pedestrian navigation in urban areas. Specifically, measurements from smartphone accelerometers are employed to detect step, the estimated step length and detected zero velocity are utilized as the constraints in an increment optimization method to improve the VT position accuracy. Field tests are carried out for assessing the WG-VT for pedestrian navigation in urban areas. Results show that the horizontal position errors are improved compared with the VT without aiding.
- 17 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-11
Walking Gait Assisted Vector Tracking GNSS for Pedestrian Position
Vector Tracking (VT) is reported as a promising method to enhance Global Navigation Satellite System (GNSS) position accuracy in urban areas. Direct signal tracking parameters and navigation solutions estimation fully exploits the inherent relationship between the navigation solutions and signal tracking parameters, which brings advantages in improving GNSS performance under signal challenging environments, i.e., weak signals. In this paper, we firstly investigated VT based pedestrian position, and we proposed walking gaits aided VT (WG-VT) method for pedestrian navigation in urban areas. Specifically, measurements from smartphone accelerometers are employed to detect step, the estimated step length and detected zero velocity are utilized as the constraints in an increment optimization method to improve the VT position accuracy. Field tests are carried out for assessing the WG-VT for pedestrian navigation in urban areas. Results show that the horizontal position errors are improved compared with the VT without aiding.
- Open Access
- 17 October 2023
- Published by MDPI AG in Remote Sensing
- Vol. 15 (20) , 4993
A Probabilistic Method-Based Smartphone GNSS Fault Detection and Exclusion System Utilizing PDR Step Length
A smartphone equipped with a Global Navigation Satellite System (GNSS) module can generate positional information for location-based services. However, GNSS signals are susceptible to fragility, multipath (MP), and Non-Line-Of-Sight (NLOS) interference, which can lead to a degradation in the accuracy of GNSS positioning on smartphones. Due to limitations in the smartphone’s antenna, GNSS signal strength is typically lower. Moreover, in urban areas, where smartphones rely on GNSS, MP and NLOS signals are the primary factors impeding accurate positioning. In this paper, with the goal of enhancing both the accuracy and robustness of smartphone GNSS positioning, we propose two methods. Firstly, an optimized particle filter method employing a Krill Herd Algorithm (KHA) is suggested for the integration of GNSS and Pedestrian Dead Reckoning (PDR). Secondly, a probabilistic approach is presented to identify faulty GNSS measurements using step distance information obtained from the PDR. Experimental tests were conducted using smartphones to evaluate the performance of the proposed method. The results demonstrate that both the KHA and fault detection methods effectively enhance the performance of integrated PDR and GNSS.
- 17 October 2023
- Published by MDPI AG in Remote Sensing
- Vol. 15 (20) , 4993
Open AccessA Probabilistic Method-Based Smartphone GNSS Fault Detection and Exclusion System Utilizing PDR Step Length
A smartphone equipped with a Global Navigation Satellite System (GNSS) module can generate positional information for location-based services. However, GNSS signals are susceptible to fragility, multipath (MP), and Non-Line-Of-Sight (NLOS) interference, which can lead to a degradation in the accuracy of GNSS positioning on smartphones. Due to limitations in the smartphone’s antenna, GNSS signal strength is typically lower. Moreover, in urban areas, where smartphones rely on GNSS, MP and NLOS signals are the primary factors impeding accurate positioning. In this paper, with the goal of enhancing both the accuracy and robustness of smartphone GNSS positioning, we propose two methods. Firstly, an optimized particle filter method employing a Krill Herd Algorithm (KHA) is suggested for the integration of GNSS and Pedestrian Dead Reckoning (PDR). Secondly, a probabilistic approach is presented to identify faulty GNSS measurements using step distance information obtained from the PDR. Experimental tests were conducted using smartphones to evaluate the performance of the proposed method. The results demonstrate that both the KHA and fault detection methods effectively enhance the performance of integrated PDR and GNSS.