HCHao Chen

Hao Chen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hao Chen has a total of 81 co-authors. Here are the top co-authors by number of shared publications:

  • Shanqing Zhang

    Institute for Sustainable Transformation School of Chemical Engineering and Light Industry Guangdong University of Technology Guangzhou China

    14 shared publications
  • Xuqi Lin

    Institute for Sustainable Transformation School of Chemical Engineering and Light Industry Guangdong University of Technology Guangzhou China

    6 shared publications
  • Zimo Huang

    School of metallurgy and environment Central South University Changsha China

    6 shared publications
  • Yuhao Liang

    Institute for Sustainable Transformation School of Chemical Engineering and Light Industry Guangdong University of Technology Guangzhou China

    5 shared publications
  • Zhenzhen Wu

    Centre for Catalysis and Clean Energy School of Environment and Science Gold Coast Campus Griffith University Gold Coast QLD 4222 Australia

    5 shared publications
  • Shangshu Qian

    Center for Catalysis and Clean Energy School of Environment and Science Griffith University Gold Coast Campus Southport QLD 4222 Australia

    4 shared publications

Latest Publications

  • Open Access

    Helical Keratin‐Derived Aqueous Binders for High‐Performance Lithium–Sulfur Batteries

    by Bingzhong Chen, Hao Chen, Xuqi Lin, Kunwei Huang, Yuhao Liang, Cheng Yan, Shanqing Zhang

    Lithium–sulfur batteries (LSBs) possess ultrahigh energy density, low cost, and environmental friendliness, making them strong contenders for next‐generation energy storage technologies. However, their development is hindered by multiple interfacial challenges, including the shuttling of lithium polysulfides (LiPS), sluggish reaction kinetics, and severe volume expansion of the cathode. To address these issues, a multifunctional biomass‐derived aqueous binder was designed by crosslinking an α‐helical protein (α‐HP) with polyvinyl alcohol (PVA) and glycerol (GL). The α ‐helical structure of α‐HP in the α‐HP/PVA/GL adhesive acts as a “molecular spring”, effectively buffering volume expansion and stabilizing the electrode structure. Additionally, its abundant N‐ and O‐containing polar groups efficiently anchor LiPS, significantly suppressing the shuttling effect and accelerating redox kinetics. Consequently, lithium‐sulfur batteries employing the α‐HP/PVA/GL binder exhibit exceptional long‐term cycling stability. The α‐HP/PVA/GL cathode delivers an initial discharge specific capacity of 737.3 mAh g −1 and retains 487.9 mAh g −1 after 600 stable cycles at 2 C, with an average capacity decay rate of only 0.056% per cycle. This study provides a green, facile, and efficient strategy for developing multifunctional binders to overcome practical bottlenecks in lithium‐sulfur battery applications.

  • Open Access

    Fluorinated Deep Eutectic Gel Electrolytes with Simultaneously Enhanced Mechanical Strength and Ionic Conductivity for Solid‐State Lithium Metal Batteries

    by Hao Long, Yuhao Liang, Ting He, Xueming Chen, Zimo Huang, Hao Chen, Shanqing Zhang

    Gel polymer electrolytes for lithium‐metal batteries face an inherent trade‐off between mechanical strength and ionic conductivity. Herein, we present a molecular‐level strategy that harnesses competitive hydrogen‐bonding interactions to spontaneously generate a nanoscale phase‐separated architecture in the deep eutectic gel (DEG) electrolyte. Through one‐step in‐situ copolymerization of acrylamide and N,N ‐dimethylacrylamide within a trifluoromethyl‐functionalized deep eutectic solvent comprising N ‐methyl‐2,2,2‐trifluoroacetamide (TNMA) and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), an interpenetrating network is formed, in which rigid polyacrylamide‐rich domains reinforce the matrix while polydimethylacrylamide‐rich channels facilitate ion transport. Driven by the competition between polymer–polymer and polymer–solvent hydrogen bonds, the resulting DEG electrolyte achieves an exceptional ionic conductivity of 2.99 mS cm −1 at 30°C, an excellent Li + transference number of 0.78, and a remarkable tensile strength of 11.4 MPa with 473% elongation. Meanwhile, TNMA, together with TFSI − , regulates the Li + solvation structure and interfacial chemistry, promoting the formation of a LiF‐rich interphase through fluorinated‐solvent‐ and anion‐involved interfacial reactions. The resulting Li||Li symmetric cells operate for over 3500 hours (0.1 mA cm −2 ), and Li|DEG|NCM811 cells retain 77.5% capacity after 400 cycles at 2 C. This work establishes competitive molecular interactions as a design principle for next‐generation gel polymer electrolytes.


  • Nitrile‐Assisted Hybrid‐Solvation Electrolyte Enables Wide‐Temperature, High‐Voltage, and Ultrafast‐Charging Lithium‐Metal Batteries

    by Yuhao Liang, Ting He, Zimo Huang, Wei Chen, Juncheng Wang, Hao Long, Xueming Chen, Meng Li, Qifeng Zheng, Hao Chen, et al.

    The stable operation of lithium metal batteries (LMBs) requires simultaneous stabilization of anode and cathode interfaces, a challenge that intensifies under extreme operating conditions due to divergent formation mechanisms. Here, we present a hybrid‐solvation electrolyte design employing isobutyronitrile (IBN) as the primary solvent to regulate both Li + solvation and interfacial protection. Functioning as a bifunctional modulator, IBN drives dual‐source interfacial chemistry at the anode where anion‐enriched solvation and coordinated‐solvent decomposition co‐generate an inorganic‐ and nitrogen‐rich solid–electrolyte interphase (SEI) while lowering Li + desolvation barriers. At the cathode surface, excess IBN molecules form an adsorption‐derived protective layer that effectively suppresses solvent oxidation and stabilizes the cathode–electrolyte interface (CEI) under high‐voltage and high‐temperature conditions. Enabled by this design, Li||LiNi 0.8 Co 0.1 Mn 0.1 O 2 coin cells exhibit robust operation across wide temperatures (−40°C∼60°C) and high voltages (4.6 V), alongside ultrafast charging capabilities (20 C). Upscaling to practical pouch cells under lean‐electrolyte conditions (1.2 g Ah −1 ) yields a high energy density of 403 Wh kg −1 with a 12‐min fast‐charging/discharging capability. The hybrid solvation design framework integrates solvent‐ and anion‐driven chemistries in a unified electrolyte, enabling high‐energy LMB operation under demanding conditions.

  • Nitrile‐Assisted Hybrid‐Solvation Electrolyte Enables Wide‐Temperature, High‐Voltage, and Ultrafast‐Charging Lithium‐Metal Batteries

    by Yuhao Liang, Ting He, Zimo Huang, Wei Chen, Juncheng Wang, Hao Long, Xueming Chen, Meng Li, Qifeng Zheng, Hao Chen, et al.

    The stable operation of lithium metal batteries (LMBs) requires simultaneous stabilization of anode and cathode interfaces, a challenge that intensifies under extreme operating conditions due to divergent formation mechanisms. Here, we present a hybrid‐solvation electrolyte design employing isobutyronitrile (IBN) as the primary solvent to regulate both Li + solvation and interfacial protection. Functioning as a bifunctional modulator, IBN drives dual‐source interfacial chemistry at the anode where anion‐enriched solvation and coordinated‐solvent decomposition co‐generate an inorganic‐ and nitrogen‐rich solid–electrolyte interphase (SEI) while lowering Li + desolvation barriers. At the cathode surface, excess IBN molecules form an adsorption‐derived protective layer that effectively suppresses solvent oxidation and stabilizes the cathode–electrolyte interface (CEI) under high‐voltage and high‐temperature conditions. Enabled by this design, Li||LiNi 0.8 Co 0.1 Mn 0.1 O 2 coin cells exhibit robust operation across wide temperatures (−40°C∼60°C) and high voltages (4.6 V), alongside ultrafast charging capabilities (20 C). Upscaling to practical pouch cells under lean‐electrolyte conditions (1.2 g Ah −1 ) yields a high energy density of 403 Wh kg −1 with a 12‐min fast‐charging/discharging capability. The hybrid solvation design framework integrates solvent‐ and anion‐driven chemistries in a unified electrolyte, enabling high‐energy LMB operation under demanding conditions.

  • Simultaneous Redox Mediation and Interfacial Engineering Enabled by Diphenyl Diselenide for High‐Performance All‐Solid‐State Li–S Batteries

    by Kunwei Huang, Bingzhong Chen, Xuqi Lin, Junxin Luo, Yuhao Liang, Shanqing Zhang, Hao Chen

    All‐solid‐state lithium–sulfur batteries (ASSLSBs) are emerging as promising candidates for next‐generation energy storage solutions, owing to their exceptional specific energy, inherent safety, and cost‐effectiveness. However, sluggish solid–solid sulfur redox kinetics hinder their rate performance and cycling longevity, posing a critical challenge for practical implementation. Herein, we introduce diphenyl diselenide (DPDSe) as a multifunctional additive that simultaneously addresses both the limitations of sulfur cathodes and interfacial issues in ASSLSBs. DPDSe serves as an efficient redox mediator, reacting with lithium polysulfides (LiPSs) to generate phenyl selenylated intermediates (LiPhSePSs), which enhance charge transfer kinetics. Furthermore, DPDSe improves the ionic conductivity of solid polymer electrolytes (SPEs) and reacts with lithium metal to form a robust solid electrolyte interphase (SEI) enriched with aromatic moieties. This aromatic‐rich SEI mitigates electrolyte degradation and suppresses lithium dendrite formation, ensuring stable interfacial contact during prolonged cycling. Remarkably, ASSLSBs incorporating DPDSe achieve an exceptional specific capacity of 400 mAh g −1 after 200 cycles at 1 C. This performance marks the highest cycling stability reported for organic mediator‐enhanced solid‐state lithium‐sulfur systems. This work establishes a novel multifunctional additive strategy to fully exploit the electrochemical potential of sulfur cathodes in solid‐state battery architectures.


  • Engineering Multifunctional Binders for Micro‐Silicon Anodes: Mechanisms, Strategies, and Applications

    by Xuqi Lin, Zimo Huang, Yuhao Liang, Shanqing Zhang, Hao Chen

    Silicon‐based anode materials are widely regarded as promising candidates for next‐generation lithium‐ion batteries owing to their high theoretical specific capacity (3579 mAh g −1 ) and natural abundance. Among these, micro‐sized silicon (micro‐Si) offers superior commercial viability compared to nano‐Si due to its lower production costs and higher tap density. However, micro‐Si electrodes encounter critical challenges during cycling, such as severe stress concentration, lithium trapping, and unstable solid electrolyte interphase (SEI) formation. Binders, acting as structural and electrochemical regulators, play a pivotal role in addressing these limitations; however, systematic evaluations of functional binders tailored for micro‐Si remain scarce. This review compares the advantages and limitations of nano‐Si and micro‐Si, highlighting the industrial potential of micro‐Si and elucidating its distinct degradation mechanisms. State‐of‐the‐art binder design strategies for micro‐Si anodes and current advances in their practical applications are then reviewed. Finally, future perspectives are discussed, emphasizing the importance of binder innovation in enabling the commercial deployment of micro‐Si anodes.


  • Mitigating Voltage Decay and Enhancing Structural Stability of Li-Rich Cathodes via a Robust Polysaccharide Binding Network

    by Hao Chen, Xirong Mai, Xuqi Lin, Xiujuan Wei, Meng Li, Senchuan Huang, Zimo Huang, Yuhao Liang, Shanqing Zhang

    Li-rich layered manganese-based oxides (LRMOs) are promising high-capacity cathodes for next-generation lithium-ion batteries (LIBs). The challenges for commercialization are mainly rapid capacity fading and discharge voltage decay due to structural transformations, electrolyte decomposition, and transition-metal dissolution. Herein, we construct a robust multifunctional binding network to address these issues by combining two water-based polysaccharide binders, including guar gum (GG) and xanthan gum (XG). The XG-GG composite binder could build a robust hydrogen-bonded network to accommodate LRMO active materials, providing superior mechanical strength and adhesion, which is significantly superior to conventional poly(vinylidene difluoride) (PVDF). The binding network could prevent electrode cracking and active material loss during cycling. In particular, the polar functional groups in the binders could interact with the cathode surface and create a uniform protective cathode electrolyte interphase (CEI) and simultaneously adsorb dissolved transition-metal (TM) ions, suppressing their migration. LRMOs with the XG-GG binder exhibit significantly enhanced electrochemical performance, yielding a high initial capacity of 266.3 mAh/g, improved capacity retention (84.2% after 100 cycles at 1C), and suppressed average voltage decay. A full-cell configuration pairing an XG-GG-based Li-rich cathode with a graphite anode further demonstrates superior long-term stability. Our findings highlight that the establishment of a robust and functional binding network can synergistically overcome the mechanical and interfacial challenges of the high-energy LRMO cathodes and offer a sustainable, water-processable strategy for LIBs manufacturing.


  • Sustainable Upcycling of Solar Silicon Waste Into Hierarchical Silicon‐Based Nanofibers Embedded With Quantum Dots for Ultra‐Stable Silicon Anodes

    by Hao Chen, Xuqi Lin, Guiying Zhao, Zhixian You, Cheng Lin, Yucan He, Xueting Lin, Jiaxin Li

    Silicon (Si) anodes, while theoretically surpassing graphite in capacity, face commercialization challenges from inherent volume fluctuations (>300%) and costly nano‐engineering processes. This study presents a sustainable solution through photovoltaic silicon waste upcycling into structurally optimized silicon/carbon (Si/C) nanofibers with Nb 2 O 5 ‐mediated interfacial chemistry. The designed architecture features a 3D continuous carbon network enabling efficient stress redistribution during lithiation and Nb 2 O 5 quantum dots embedding within the outer layer that dual‐functionalizes as both hydrogen fluoride (HF) corrosion inhibitor and Li⁺ diffusion promoter. Electrochemical characterization reveals stabilized solid electrolyte interphase (SEI) due to the robust 3D network and suppress HF attack by Nb 2 O 5 quantum dots. Benefiting from the enhanced structural stability and interfacial compatibility, the resultant Nb 2 O 5 ‐engineered Si/C anode achieves 77.3% initial Coulombic efficiency with 780 mAh g −1 retention after 1000 cycles at 1.0 A g −1 (0.023% capacity decay per cycle), outperforming state‐of‐the‐art recycled Si anodes in both cyclability and cost‐effectiveness. This study pioneers a dual‐approach strategy that simultaneously establishes a sustainable upstream silicon source through photovoltaic waste valorization and resolves the persistent challenges of cyclic volumetric expansion and interfacial instability inherent to silicon anodes.


  • Additives Capable of Stably Supplying Anions/Cations for Homogeneous Lithium Deposition/Stripping

    by Shangshu Qian, Xiao Tan, Yutong Zhu, Yun Wang, Hao Chen, Mengting Zheng, Cheng Zhang, Shanqing Zhang, Jun Lu

    One of the important factors leading to lithium dendrites is a slow lithium-ion mass transport and imbalanced distribution of the Li+ concentration and nuclei sites on the anode surface. To achieve uniform lithium deposition during the charge and discharge process, we introduce a homemade new copolymer (with the quaternary ammonium group N3R+I- on its side chain as the main functional group), named P35, as a functional electrolyte additive to regulate the lithium deposition. Theoretical calculations show that under the strong coordinating interaction between I- and N3R+, P35 preferentially adsorbs onto the lithium foil surface, effectively countering the adsorption of lithium salt anions such as PF6-. Moreover, the positive charge carried by the quaternary ammonium salt group of P35 could interact with PF6- to limit their mobility. Consequently, the dipole interaction on lithium ions is diminished, leading to an enhancement in the transport rate and a decrease in the concentration gradient of lithium ions. Furthermore, a more efficient SEI was formed due to the dual charges electrostatic shield formed by N3R+I-. Li-Li symmetric cells and Li-LiFePO4 full cells assembled with electrolytes with P35 exhibit better rate performance, smaller polarization, and smoother deposition morphology in comparison to the cells without the P35 additive.