Xiang Chen
Research Subjects
Xiang Chen has a total of 88 co-authors. Here are the top co-authors by number of shared publications:
Dongming Liu
Anhui University of Technology
6 shared publicationsHaonan Wang
Key Laboratory of Metallurgical Emission Reduction & Resources Recycling, Anhui University of Technology, Ministry of Education, Maanshan 243002, P. R. China
4 shared publicationsRuru Meng
School of Mathematics and Physics Anhui University of Technology Maanshan 243002 P. R. China
4 shared publicationsBin Xia
School of Materials Science and Engineering Anhui University of Technology Maanshan 243002 P. R. China
3 shared publications- Wei Chen
Department of Chemistry, National University of Singapore, Singapore, Singapore
3 shared publications Ganwen Chen
Department of Chemistry, National University of Singapore, 3 Science Drive 3, Singapore, 117543, Singapore
2 shared publications
Latest Publications
- 15 September 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (38) , 22226-22232
Deconvoluting Competing Adsorbate Evolution, Single- and Dual-Lattice Oxygen OER Pathways in Iron-Doped Nickel Layered Double Hydroxides
Nickel–iron layered double hydroxides are efficient nonprecious oxygen evolution reaction (OER) electrocatalysts, although their complex lattice oxygen-related OER mechanisms lack quantitative discrimination of the adsorbate evolution mechanism (AEM), single-lattice oxygen mechanism (SLOM), and dual-lattice oxygen mechanism (DLOM). Herein, we adopt in situ isotopic differential electrochemical mass spectrometry to quantitatively resolve these competing pathways via iron doping and potential modulation. The iron content and overpotential jointly regulate multipathway OER behaviors. This work clarifies long-standing mechanistic ambiguities and provides atomic-scale guidance for optimizing non-noble OER electrocatalysts.
- 15 September 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (38) , 22226-22232
Deconvoluting Competing Adsorbate Evolution, Single- and Dual-Lattice Oxygen OER Pathways in Iron-Doped Nickel Layered Double Hydroxides
Nickel–iron layered double hydroxides are efficient nonprecious oxygen evolution reaction (OER) electrocatalysts, although their complex lattice oxygen-related OER mechanisms lack quantitative discrimination of the adsorbate evolution mechanism (AEM), single-lattice oxygen mechanism (SLOM), and dual-lattice oxygen mechanism (DLOM). Herein, we adopt in situ isotopic differential electrochemical mass spectrometry to quantitatively resolve these competing pathways via iron doping and potential modulation. The iron content and overpotential jointly regulate multipathway OER behaviors. This work clarifies long-standing mechanistic ambiguities and provides atomic-scale guidance for optimizing non-noble OER electrocatalysts.
- 6 September 2026
- Published by Elsevier in Applied Catalysis B: Environment and Energy
- Vol. 402
Dislocation-engineered NiO for efficient polyethylene terephthalate upcycling coupled with hydrogen production
- 6 September 2026
- Published by Elsevier in Applied Catalysis B: Environment and Energy
- Vol. 402
Dislocation-engineered NiO for efficient polyethylene terephthalate upcycling coupled with hydrogen production
- 17 June 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (25) , 25866-25876
Self-Coordinating Electronic Metal–Support Interaction Stabilizes Ultralow-Loading Ir Single Atoms for Durable Acidic Oxygen Evolution
Engineering electronic metal-support interactions (EMSI) enables scalable proton exchange membrane water electrolysis (PEMWE) at ultralow Ir loadings by buffering Ir against overoxidation and dissolution under acidic oxygen evolution conditions (OER). However, a seemingly disparate interpretation has persisted: high-valent Ir is often associated with optimal intermediate adsorption, whereas low-valent Ir correlates with improved corrosion resistance, suggesting that static EMSI fails to rationalize the activity-stability trade-off. Here, we construct an atomically dispersed Ir-O-Co interface by anchoring isolated Ir single atoms on spinel Co3O4, providing a new perspective on a dynamic charge-compensation mechanism: at low bias, the Ir site is progressively oxidized to enhance water activation and intermediate turnover; at high bias, the Co3O4 compensates charge back to the Ir site, thereby suppressing overoxidation-driven dissolution. Such self-coordinating EMSI breaks the conventional activity-stability trade-off in acidic OER. In an integrated PEM electrolyzer, the Ir single-atom catalyst sustains operation for >1500 h at 1.0 A cm-2 with an ultralow Ir loading of 0.1 mg cm-2, highlighting the importance of self-coordinating EMSI for durable, precious-metal-minimized PEMWE anodes.
- 17 June 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (25) , 25866-25876
Self-Coordinating Electronic Metal–Support Interaction Stabilizes Ultralow-Loading Ir Single Atoms for Durable Acidic Oxygen Evolution
Engineering electronic metal-support interactions (EMSI) enables scalable proton exchange membrane water electrolysis (PEMWE) at ultralow Ir loadings by buffering Ir against overoxidation and dissolution under acidic oxygen evolution conditions (OER). However, a seemingly disparate interpretation has persisted: high-valent Ir is often associated with optimal intermediate adsorption, whereas low-valent Ir correlates with improved corrosion resistance, suggesting that static EMSI fails to rationalize the activity-stability trade-off. Here, we construct an atomically dispersed Ir-O-Co interface by anchoring isolated Ir single atoms on spinel Co3O4, providing a new perspective on a dynamic charge-compensation mechanism: at low bias, the Ir site is progressively oxidized to enhance water activation and intermediate turnover; at high bias, the Co3O4 compensates charge back to the Ir site, thereby suppressing overoxidation-driven dissolution. Such self-coordinating EMSI breaks the conventional activity-stability trade-off in acidic OER. In an integrated PEM electrolyzer, the Ir single-atom catalyst sustains operation for >1500 h at 1.0 A cm-2 with an ultralow Ir loading of 0.1 mg cm-2, highlighting the importance of self-coordinating EMSI for durable, precious-metal-minimized PEMWE anodes.
- 22 April 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (17) , 9419-9428
Modifying the Redox Properties of Co 3 O 4 for Enhanced Acidic Oxygen Evolution by Lattice Stretching
Proton exchange membrane water electrolysis technology demonstrates significant potential for advancing the green hydrogen economy, yet it remains constrained by the reliance on noble metal catalysts. This study develops a low-cost Co3O4 catalyst via a potassium bromide-assisted thermal decomposition method, which induces lattice tensile strain to modulate the redox properties of cobalt, leading to a remarkable enhancement of the oxygen evolution reaction (OER) performance of Co3O4 in acidic media. The prepared Co3O4 electrocatalyst exhibits outstanding OER performance under acidic conditions, requiring only 377 mV of overpotential to achieve a current density of 10 mA·cm–2 and maintaining stable operation for 150 h. In situ differential electrochemical mass spectrometry (DEMS) analysis and cyclic voltammetry results confirm that the lattice tensile strain alters the redox mechanism of Co3O4, promoting its transition toward the oxide pathway mechanism and thereby improving both the activity and stability of the oxygen evolution reaction.
- 22 April 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (17) , 9419-9428
Modifying the Redox Properties of Co 3 O 4 for Enhanced Acidic Oxygen Evolution by Lattice Stretching
Proton exchange membrane water electrolysis technology demonstrates significant potential for advancing the green hydrogen economy, yet it remains constrained by the reliance on noble metal catalysts. This study develops a low-cost Co3O4 catalyst via a potassium bromide-assisted thermal decomposition method, which induces lattice tensile strain to modulate the redox properties of cobalt, leading to a remarkable enhancement of the oxygen evolution reaction (OER) performance of Co3O4 in acidic media. The prepared Co3O4 electrocatalyst exhibits outstanding OER performance under acidic conditions, requiring only 377 mV of overpotential to achieve a current density of 10 mA·cm–2 and maintaining stable operation for 150 h. In situ differential electrochemical mass spectrometry (DEMS) analysis and cyclic voltammetry results confirm that the lattice tensile strain alters the redox mechanism of Co3O4, promoting its transition toward the oxide pathway mechanism and thereby improving both the activity and stability of the oxygen evolution reaction.
- Open Access
Tuning Electronic Effects in P‐Block Metal‐C 60 Catalysts for Highly Selective CO 2 Reduction to Formate
Electrochemical CO 2 reduction (CO 2 R) to formate offers a promising pathway toward sustainable chemical production. Although P‐block metals display excellent selectivity, a universal approach for electronically tuning their active sites to simultaneously enhance activity and selectivity has remained challenging. In this work, we employ C 60 nanosheets as electron‐buffering supports to modulate interfacial charge, and hence to improve the performance of P‐block metals in CO 2 R. Compared with pure indium (Pure In) catalyst, the C 60 nanosheets supported In nanoclusters catalyst (In−C 60 ) featuring high oxidation state achieves formate‐dominated products across wide current densities, with high faradaic efficiency for formate reaching about 93% at 900 mA cm −2 under alkaline conditions and 97% at 700 mA cm −2 in acid, as well as higher stability exceeding 210 h in alkaline media. Operando infrared spectroscopy reveals that In−C 60 promotes * OCHO formation, and fixed‐potential density functional theory (DFT) calculations indicate that C 60 tunes the In─O antibonding states near the Fermi level, weakening intermediate binding and facilitating the following protonation to formate. The strategy extends to other P‐block metals (Bi, Sn, Pb), with the same electronic‐tuning effect. This work introduces a generalizable strategy for P‐block metal electrocatalysts and a practical route toward efficient, sustainable chemical production.
Open AccessTuning Electronic Effects in P‐Block Metal‐C 60 Catalysts for Highly Selective CO 2 Reduction to Formate
Electrochemical CO 2 reduction (CO 2 R) to formate offers a promising pathway toward sustainable chemical production. Although P‐block metals display excellent selectivity, a universal approach for electronically tuning their active sites to simultaneously enhance activity and selectivity has remained challenging. In this work, we employ C 60 nanosheets as electron‐buffering supports to modulate interfacial charge, and hence to improve the performance of P‐block metals in CO 2 R. Compared with pure indium (Pure In) catalyst, the C 60 nanosheets supported In nanoclusters catalyst (In−C 60 ) featuring high oxidation state achieves formate‐dominated products across wide current densities, with high faradaic efficiency for formate reaching about 93% at 900 mA cm −2 under alkaline conditions and 97% at 700 mA cm −2 in acid, as well as higher stability exceeding 210 h in alkaline media. Operando infrared spectroscopy reveals that In−C 60 promotes * OCHO formation, and fixed‐potential density functional theory (DFT) calculations indicate that C 60 tunes the In─O antibonding states near the Fermi level, weakening intermediate binding and facilitating the following protonation to formate. The strategy extends to other P‐block metals (Bi, Sn, Pb), with the same electronic‐tuning effect. This work introduces a generalizable strategy for P‐block metal electrocatalysts and a practical route toward efficient, sustainable chemical production.
- 4 June 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (24) , 20600-20611
Breaking the Scaling Relationship in Water Oxidation Enabled by the Electron Buffering Effect of the Fullerene Network
The scaling relationship among reaction intermediates with strongly correlated adsorption energy in the oxygen evolution reaction (OER) severely restricts the energy-conversion efficiency of water electrolysis. For the conventional adsorbate evolution mechanism, breaking the scaling relationship remains challenging, as it is difficult to modulate the adsorption of multiple intermediates on a specific active site simultaneously. Herein, we utilize the electron buffering effect of a two-dimensional fullerene network (C60NET) to dynamically tune the electronic structure of the iridium (Ir) active site with the change of adsorbed intermediates, which can tailor the adsorption strength of intermediates from multistep reactions and break the adsorption-energy scaling relationships among *OOH, *O, and *OH. The C60NET-buffered Ir nanocluster catalyst exhibits excellent OER activity with a low overpotential of 237 mV and stability over 600 h at 10 mA cm-2, outperforming graphene-supported Ir nanoclusters and commercial IrOx, attributed to the breaking of the linear scaling relationship enabled by the unique ability to reversibly accept and donate electrons of C60NET.
- 4 June 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (24) , 20600-20611
Breaking the Scaling Relationship in Water Oxidation Enabled by the Electron Buffering Effect of the Fullerene Network
The scaling relationship among reaction intermediates with strongly correlated adsorption energy in the oxygen evolution reaction (OER) severely restricts the energy-conversion efficiency of water electrolysis. For the conventional adsorbate evolution mechanism, breaking the scaling relationship remains challenging, as it is difficult to modulate the adsorption of multiple intermediates on a specific active site simultaneously. Herein, we utilize the electron buffering effect of a two-dimensional fullerene network (C60NET) to dynamically tune the electronic structure of the iridium (Ir) active site with the change of adsorbed intermediates, which can tailor the adsorption strength of intermediates from multistep reactions and break the adsorption-energy scaling relationships among *OOH, *O, and *OH. The C60NET-buffered Ir nanocluster catalyst exhibits excellent OER activity with a low overpotential of 237 mV and stability over 600 h at 10 mA cm-2, outperforming graphene-supported Ir nanoclusters and commercial IrOx, attributed to the breaking of the linear scaling relationship enabled by the unique ability to reversibly accept and donate electrons of C60NET.
- 3 October 2024
- Published by Wiley in Laser & Photonics Reviews
- Vol. 19 (3)
2D Black Phosphorus Infrared Photodetectors
2D black phosphorus (b‐P) possesses several remarkable properties, including ambipolar transport, high carrier mobility, in‐plane anisotropy, polarization sensitivity, a narrow direct bandgap that can be tuned with the number of layers, and highly compatible with silicon‐based technologies. These characteristics make it a promising material for photodetection in the near‐infrared to mid‐infrared range. However, to date, most of the reviews on b‐P are centered around electronic and optoelectronic devices, with few specifically addressing infrared detection. Herein, the recent research progress on b‐P infrared detectors is summarized in this review. This article introduces the principle of optoelectronic detection, the main properties of 2D b‐P, the development history of b‐P fabrication methods, presents and discusses the performance and characteristics of various infrared photodetectors based on different structures of 2D b‐P that have been researched in recent years. Finally, the challenges that may be faced by black phosphorus‐based infrared photoelectric detectors are briefly introduced, and the potential application directions are discussed from the perspective of large‐scale production and practical application. This article provides an in‐depth analysis and evaluation of the future development prospects of 2D b‐P materials as a potential excellent candidate of infrared photodetectors.
- 3 October 2024
- Published by Wiley in Laser & Photonics Reviews
- Vol. 19 (3)
2D Black Phosphorus Infrared Photodetectors
2D black phosphorus (b‐P) possesses several remarkable properties, including ambipolar transport, high carrier mobility, in‐plane anisotropy, polarization sensitivity, a narrow direct bandgap that can be tuned with the number of layers, and highly compatible with silicon‐based technologies. These characteristics make it a promising material for photodetection in the near‐infrared to mid‐infrared range. However, to date, most of the reviews on b‐P are centered around electronic and optoelectronic devices, with few specifically addressing infrared detection. Herein, the recent research progress on b‐P infrared detectors is summarized in this review. This article introduces the principle of optoelectronic detection, the main properties of 2D b‐P, the development history of b‐P fabrication methods, presents and discusses the performance and characteristics of various infrared photodetectors based on different structures of 2D b‐P that have been researched in recent years. Finally, the challenges that may be faced by black phosphorus‐based infrared photoelectric detectors are briefly introduced, and the potential application directions are discussed from the perspective of large‐scale production and practical application. This article provides an in‐depth analysis and evaluation of the future development prospects of 2D b‐P materials as a potential excellent candidate of infrared photodetectors.
- 12 April 2024
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 9 (5) , 2182-2192
Facet-Dependent Lattice Oxygen Activation on Oxygen-Defective Co3O4 for Electrocatalytic Oxygen Evolution Reaction
- 12 April 2024
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 9 (5) , 2182-2192
Facet-Dependent Lattice Oxygen Activation on Oxygen-Defective Co3O4 for Electrocatalytic Oxygen Evolution Reaction
- 3 July 2023
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 650 (Pt A) , 498-505
Lattice tensile strain cobalt phosphate with modulated hydroxide adsorption and structure transformation towards improved oxygen evolution reaction
- 3 July 2023
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 650 (Pt A) , 498-505
Lattice tensile strain cobalt phosphate with modulated hydroxide adsorption and structure transformation towards improved oxygen evolution reaction
- 23 March 2022
- Published by Wiley in Advanced Functional Materials
- Vol. 32 (26)
S‐Doping Triggers Redox Reactivities of Both Iron and Lattice Oxygen in FeOOH for Low‐Cost and High‐Performance Water Oxidation
Developing low‐cost and highly efficient earth‐abundant oxygen evolution reaction (OER) electrocatalysts via an energy‐ and time‐saving method is of great significance to the generation of H2 from electrochemical water splitting, which is highly desirable but still challenging. Herein, a one‐step route to in situ grow S‐doped FeOOH vertical nanosheets on iron foam (IF) in 20 min under room temperature is shown. This facile and ultrafast method effectively modifies the surface of the IF into an S‐doped FeOOH layer, and a full‐Fe electrode (S‐FeOOH/IF) is achieved. Systematic experiments and characterizations demonstrate that the redox reactivities for both of the iron and lattice oxygen in FeOOH are sufficiently activated, leading to the dramatically improved intrinsic OER activity. The as‐obtained S‐FeOOH/IF exhibits a fascinating OER performance with a low overpotential of 244 at 10 mA cm−2. This work affords an efficient surface engineering strategy to drive commercial IF into cost‐efficient and robust earth‐abundant electrocatalysts for water oxidation, which has important implications for clean H2 production through a low‐carbon and environmentally friendly route.
- 23 March 2022
- Published by Wiley in Advanced Functional Materials
- Vol. 32 (26)
S‐Doping Triggers Redox Reactivities of Both Iron and Lattice Oxygen in FeOOH for Low‐Cost and High‐Performance Water Oxidation
Developing low‐cost and highly efficient earth‐abundant oxygen evolution reaction (OER) electrocatalysts via an energy‐ and time‐saving method is of great significance to the generation of H2 from electrochemical water splitting, which is highly desirable but still challenging. Herein, a one‐step route to in situ grow S‐doped FeOOH vertical nanosheets on iron foam (IF) in 20 min under room temperature is shown. This facile and ultrafast method effectively modifies the surface of the IF into an S‐doped FeOOH layer, and a full‐Fe electrode (S‐FeOOH/IF) is achieved. Systematic experiments and characterizations demonstrate that the redox reactivities for both of the iron and lattice oxygen in FeOOH are sufficiently activated, leading to the dramatically improved intrinsic OER activity. The as‐obtained S‐FeOOH/IF exhibits a fascinating OER performance with a low overpotential of 244 at 10 mA cm−2. This work affords an efficient surface engineering strategy to drive commercial IF into cost‐efficient and robust earth‐abundant electrocatalysts for water oxidation, which has important implications for clean H2 production through a low‐carbon and environmentally friendly route.