Ying Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ying Yang has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Guixia Zhang
School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China
2 shared publications - Meng Cao
School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China
2 shared publications - Wanyu Chen
School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China
2 shared publications - Lili Wu
School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China
1 shared publication - Lili Wu
School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China
1 shared publication - Pei Tang
State Key Laboratory of Silicate Materials for Architectures, Wuhan University of Technology, Wuhan 430070, China
1 shared publication
Latest Publications
- Open Access
Study on a Hydrogel for Adsorption of Chloride Ions in Cementitious Materials
Chloride ions in the seaside environment can corrode the steel reinforcement in concrete, which greatly endangers the safety of seaside structures. As an excellent adsorption material, hydrogel is widely used in the field of water treatment but is rarely used in cementitious materials. In this study, a polyacrylamide–chitosan hydrogel (PAMC) was prepared with N,N-methylenebisacrylamide as the cross-linking agent and acrylamide as the monomer. The prepared PAMC gel could effectively adsorb chloride ions in simulated seawater and simulated sea sand environments, and the maximum adsorption capacity of chloride ions by PAMC-1 (prepared from 2.5 g acrylamide and 1% content of N,N-methylenebisacrylamide relative to acrylamide) gels in simulated seawater was 55.53 mg/g. The adsorption behavior of the PAMC gels in solution fit the Langmuir isotherm model. The composition and morphology of the PAMC gel were characterized, and the responsiveness of the PAMC gel to the environment was studied. The results showed that the PAMC gels adsorbed better in alkaline environments and thus could be used in alkaline cement-based environments. The mortar sample containing the PAMC-1 gel had higher resistance to chloride ion penetration, and the chloride ion content at 7.5–10mm from the surface of the sample cured for 28 days was reduced by 41.4% compared to the samples without the gel.
Open AccessStudy on a Hydrogel for Adsorption of Chloride Ions in Cementitious Materials
Chloride ions in the seaside environment can corrode the steel reinforcement in concrete, which greatly endangers the safety of seaside structures. As an excellent adsorption material, hydrogel is widely used in the field of water treatment but is rarely used in cementitious materials. In this study, a polyacrylamide–chitosan hydrogel (PAMC) was prepared with N,N-methylenebisacrylamide as the cross-linking agent and acrylamide as the monomer. The prepared PAMC gel could effectively adsorb chloride ions in simulated seawater and simulated sea sand environments, and the maximum adsorption capacity of chloride ions by PAMC-1 (prepared from 2.5 g acrylamide and 1% content of N,N-methylenebisacrylamide relative to acrylamide) gels in simulated seawater was 55.53 mg/g. The adsorption behavior of the PAMC gels in solution fit the Langmuir isotherm model. The composition and morphology of the PAMC gel were characterized, and the responsiveness of the PAMC gel to the environment was studied. The results showed that the PAMC gels adsorbed better in alkaline environments and thus could be used in alkaline cement-based environments. The mortar sample containing the PAMC-1 gel had higher resistance to chloride ion penetration, and the chloride ion content at 7.5–10mm from the surface of the sample cured for 28 days was reduced by 41.4% compared to the samples without the gel.
- Open Access
Study of a Novel Electrochromic Device with Crystalline WO3 and Gel Electrolyte
Most ECDs are coated with an electrochromic material on the transparent conductive oxide (TCO) substrate. A novel electrochromic device (ECD), having a variable optical performance, was prepared by using tungsten foil as a substrate in this study. It was found that the WO3 discoloration layer, having a monoclinic phase crystalline structure made of 600 °C calcined, had optimum charge transmission performance with PADA gel polymer electrolyte. Ionic conductivity of PADA gel polymer electrolyte was 2.3 × 10−3 S cm−1 at −20 °C, and it was possible to help Li+ to implement embedding and extraction from WO3 even in low-temperature conditions. The colored time (tc) and the bleached time (tb) of the electrochromic device were 15 s and 26 s, and it showed yellowish-brown in the colored state and navy blue in the bleached state. The ECD (WO3-600) exhibited good cycle stability reach at least 150 times.
Open AccessStudy of a Novel Electrochromic Device with Crystalline WO3 and Gel Electrolyte
Most ECDs are coated with an electrochromic material on the transparent conductive oxide (TCO) substrate. A novel electrochromic device (ECD), having a variable optical performance, was prepared by using tungsten foil as a substrate in this study. It was found that the WO3 discoloration layer, having a monoclinic phase crystalline structure made of 600 °C calcined, had optimum charge transmission performance with PADA gel polymer electrolyte. Ionic conductivity of PADA gel polymer electrolyte was 2.3 × 10−3 S cm−1 at −20 °C, and it was possible to help Li+ to implement embedding and extraction from WO3 even in low-temperature conditions. The colored time (tc) and the bleached time (tb) of the electrochromic device were 15 s and 26 s, and it showed yellowish-brown in the colored state and navy blue in the bleached state. The ECD (WO3-600) exhibited good cycle stability reach at least 150 times.