Dong Han
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Dong Han has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
- George N. Barakos
University of Glasgow
5 shared publications - Huanjin Wang
National Key Laboratory of Helicopter Aeromechanics, College of Aerospace Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210001, China
3 shared publications - Jiayu Wen
National Key Laboratory of Helicopter Aeromechanics, College of Aerospace Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210001, China
3 shared publications - Xing Wang
National Key Laboratory of Electromagnetic Energy, Naval University of Engineering, Wuhan 430033, China
3 shared publications - Yanguo Song
National Key Laboratory of Helicopter Aeromechanics, College of Aerospace Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210001, China
3 shared publications - Changfa Yang
AVIC-Hongdu, Nanchang 330024, China
2 shared publications
Latest Publications
- Open Access
Efficient Parametric Analysis Framework for Rotor/Wing Hover Interference of DEP Unmanned Aerial Vehicles
During hover, DEP unmanned aerial vehicles (UAVs) suffer severe aerodynamic interference between rotor downwash and the wing, causing thrust loss. High-fidelity CFD can capture the interference physics but is too costly for iterative design. Existing reduced-order models (ROMs) are fast, but their predictions of wing download have not been adequately validated across variations in wing chord, nacelle offset, and rotor-to-wing height. To address this, we propose an integrated framework combining a validated overset-grid CFD model, a parametric reduced-order model that decomposes wing download into an equivalent coefficient multiplied by the slipstream-impinged area, and Latin hypercube sampling for design-space exploration. The equivalent coefficient is represented via Gaussian process regression over three geometric parameters using CFD-calibrated data. The reduced-order model predicts wing download in seconds (less than 10 s per evaluation on a standard desktop workstation), whereas the corresponding high-fidelity CFD simulation typically requires approximately 2 to 4 h per case on a 256 core HPC cluster. The reduced-order model predicts wing download in seconds with a maximum validation error of 7.6% and successfully classifies the design space into acceptable and high interference regimes. Nine geometrically distinct validation points across both interference regimes show correct categorization with no misclassification. The framework provides a lightweight screening tool for isolated rotor–wing interaction analysis, which is a fundamental building block for understanding more complex DEP configurations. The overall modeling framework is methodologically extendable to other configurations through recalibration, though such extensions are not pursued in the present work.
Open AccessEfficient Parametric Analysis Framework for Rotor/Wing Hover Interference of DEP Unmanned Aerial Vehicles
During hover, DEP unmanned aerial vehicles (UAVs) suffer severe aerodynamic interference between rotor downwash and the wing, causing thrust loss. High-fidelity CFD can capture the interference physics but is too costly for iterative design. Existing reduced-order models (ROMs) are fast, but their predictions of wing download have not been adequately validated across variations in wing chord, nacelle offset, and rotor-to-wing height. To address this, we propose an integrated framework combining a validated overset-grid CFD model, a parametric reduced-order model that decomposes wing download into an equivalent coefficient multiplied by the slipstream-impinged area, and Latin hypercube sampling for design-space exploration. The equivalent coefficient is represented via Gaussian process regression over three geometric parameters using CFD-calibrated data. The reduced-order model predicts wing download in seconds (less than 10 s per evaluation on a standard desktop workstation), whereas the corresponding high-fidelity CFD simulation typically requires approximately 2 to 4 h per case on a 256 core HPC cluster. The reduced-order model predicts wing download in seconds with a maximum validation error of 7.6% and successfully classifies the design space into acceptable and high interference regimes. Nine geometrically distinct validation points across both interference regimes show correct categorization with no misclassification. The framework provides a lightweight screening tool for isolated rotor–wing interaction analysis, which is a fundamental building block for understanding more complex DEP configurations. The overall modeling framework is methodologically extendable to other configurations through recalibration, though such extensions are not pursued in the present work.
- Open Access
- 18 June 2026
- Published by Cambridge University Press (CUP) in The Aeronautical Journal
- Vol. 130 (1351) , 1
Identification of induced inflow factor of tiltrotor based on augmented dynamic inflow model – CORRIGENDUM
- 18 June 2026
- Published by Cambridge University Press (CUP) in The Aeronautical Journal
- Vol. 130 (1351) , 1
Open AccessIdentification of induced inflow factor of tiltrotor based on augmented dynamic inflow model – CORRIGENDUM
- 24 March 2026
- Published by Cambridge University Press (CUP) in The Aeronautical Journal
- Vol. 130 (1347) , 1726-1743
Identification of induced inflow factor of tiltrotor based on augmented dynamic inflow model
Aerodynamic modeling of tiltrotor aircraft is inherently limited by incomplete aerofoil data for blades constructed from multiple aerofoil sections. This data deficiency leads fundamental errors into the blade element theory (BET) inputs, resulting in inaccurate induced velocity and unsteady load predictions that compromise flight control design. To overcome this limitation, a corrective induced inflow factor k is introduced into an augmented Pitt–Peters dynamic inflow model. For fixed tilt angles, k is efficiently identified via an optimisation framework. The fmincon algorithm attains the optimal k with a computational speed 5–6 times faster than the genetic algorithm, while maintaining thrust coefficient errors within 1.26%. For continuous tilting, a direction-aware, time-varying quadratic model for k ( t ) is proposed, which uses the Fréchet distance metric to accurately reconstruct the aerodynamic hysteresis loop and eliminate spurious load predictions during rotation reversal. Validated through wind tunnel tests, the framework reduces the maximum thrust prediction error in dynamic tilting from 34.10 to 10.70%. The corrected aerodynamic model supports real-time simulation and provides a reliable foundation for advanced tiltrotor control system design.
- 24 March 2026
- Published by Cambridge University Press (CUP) in The Aeronautical Journal
- Vol. 130 (1347) , 1726-1743
Identification of induced inflow factor of tiltrotor based on augmented dynamic inflow model
Aerodynamic modeling of tiltrotor aircraft is inherently limited by incomplete aerofoil data for blades constructed from multiple aerofoil sections. This data deficiency leads fundamental errors into the blade element theory (BET) inputs, resulting in inaccurate induced velocity and unsteady load predictions that compromise flight control design. To overcome this limitation, a corrective induced inflow factor k is introduced into an augmented Pitt–Peters dynamic inflow model. For fixed tilt angles, k is efficiently identified via an optimisation framework. The fmincon algorithm attains the optimal k with a computational speed 5–6 times faster than the genetic algorithm, while maintaining thrust coefficient errors within 1.26%. For continuous tilting, a direction-aware, time-varying quadratic model for k ( t ) is proposed, which uses the Fréchet distance metric to accurately reconstruct the aerodynamic hysteresis loop and eliminate spurious load predictions during rotation reversal. Validated through wind tunnel tests, the framework reduces the maximum thrust prediction error in dynamic tilting from 34.10 to 10.70%. The corrected aerodynamic model supports real-time simulation and provides a reliable foundation for advanced tiltrotor control system design.
- Open Access
- 9 February 2026
- Published by Elsevier in Chinese Journal of Aeronautics
- Vol. 39 (8)
Multiphysics modeling and harmonic input correlation analysis for active twist rotors: Load reduction with macrofiber piezoelectric composites
- 9 February 2026
- Published by Elsevier in Chinese Journal of Aeronautics
- Vol. 39 (8)
Open AccessMultiphysics modeling and harmonic input correlation analysis for active twist rotors: Load reduction with macrofiber piezoelectric composites
- 9 January 2026
- Published by Elsevier in Aerospace Science and Technology
- Vol. 172
Multidisciplinary design analysis and optimization of aero-assisted orbital transfer vehicle
- 9 January 2026
- Published by Elsevier in Aerospace Science and Technology
- Vol. 172
Multidisciplinary design analysis and optimization of aero-assisted orbital transfer vehicle
- 21 June 2025
- Published by Springer Nature in International Journal of Aeronautical and Space Sciences
- Vol. 27 (1) , 1014-1035
Parameter Optimization Based on Adaptive Genetic Algorithm to Improve the Flight Performance of a High-Speed Compound Helicopter
- 21 June 2025
- Published by Springer Nature in International Journal of Aeronautical and Space Sciences
- Vol. 27 (1) , 1014-1035
Parameter Optimization Based on Adaptive Genetic Algorithm to Improve the Flight Performance of a High-Speed Compound Helicopter
- Open Access
- 1 January 2025
- Published by Japan Society for Aeronautical and Space Sciences in TRANSACTIONS OF THE JAPAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES
- Vol. 68 (4) , 159-169
Helicopter Rotor Performance Improvement by Piecewise Dynamic Twist of Rotor Blades
Piecewise dynamic twist of rotor blades is studied as a method for reducing rotor power and improving rotor performance. A validated helicopter model is used to predict the rotor power at different flight states. The effects of the parameters of the piecewise dynamic twist, including the phase angle, amplitude, harmonic number, and location, on the rotor performance are investigated. The inboard blade locations with the 1/rev dynamic twist are the most efficient parts to reduce the rotor power at low advance ratios, and the outboard locations are better for high advance ratios. A 2/rev dynamic twist usually can save more power at high advance ratios. Larger twist actuation leads to larger rotor power reduction, while the actuation with fewer actuated piezoelectric patches is more efficient. The dynamic twist with six pairs of the actuated patches is appropriate which can balance the efficiency and power savings. By deploying a piecewise dynamic twist containing the 1/rev and 2/rev twists at the spanwise locations of 10%–40% and 60%–90% of the blade, the rotor power can be significantly reduced and the performance is improved, especially at high advance ratios. A power reduction of 9.0% can be obtained at an advance ratio of 0.375.
- 1 January 2025
- Published by Japan Society for Aeronautical and Space Sciences in TRANSACTIONS OF THE JAPAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES
- Vol. 68 (4) , 159-169
Open AccessHelicopter Rotor Performance Improvement by Piecewise Dynamic Twist of Rotor Blades
Piecewise dynamic twist of rotor blades is studied as a method for reducing rotor power and improving rotor performance. A validated helicopter model is used to predict the rotor power at different flight states. The effects of the parameters of the piecewise dynamic twist, including the phase angle, amplitude, harmonic number, and location, on the rotor performance are investigated. The inboard blade locations with the 1/rev dynamic twist are the most efficient parts to reduce the rotor power at low advance ratios, and the outboard locations are better for high advance ratios. A 2/rev dynamic twist usually can save more power at high advance ratios. Larger twist actuation leads to larger rotor power reduction, while the actuation with fewer actuated piezoelectric patches is more efficient. The dynamic twist with six pairs of the actuated patches is appropriate which can balance the efficiency and power savings. By deploying a piecewise dynamic twist containing the 1/rev and 2/rev twists at the spanwise locations of 10%–40% and 60%–90% of the blade, the rotor power can be significantly reduced and the performance is improved, especially at high advance ratios. A power reduction of 9.0% can be obtained at an advance ratio of 0.375.
- Open Access
Training Sample Pattern Optimization Based on a Swarm Intelligence Algorithm for Tiltrotor Flight Dynamics Model Approximation
Neural networks have been widely used as compensational models for aircraft control designs and as surrogate models for other optimizations. In the case of tiltrotor aircraft, the total number of aircraft states and controls is much greater than that of both traditional fixed-wings and helicopters. This requires, in general, a huge amount of training data for the network to reach a satisfactory approximation precision and makes the network size rise considerably. To solve the practical problem of reducing the size of the approximating network, efforts have to be made in the efficient utilization of the limited amount of training data. This work presents the methodology of optimizing the sample pattern of the training data set by adopting the metaheuristic algorithm of the particle swarm optimizer improved by the fourth-order Runge–Kutta algorithm. A 6-degree-of-freedom nonlinear flight dynamics model of the tiltrotor aircraft is derived, along with its approximation radial basis function neural network. An example case of approximating a highly nonlinear function is studied to illustrate the principle and main parameters of the optimizer, and the approximation performance of the time-domain response of the unstable nonlinear system is revealed by the study of a Van der Pol oscillator. Then, the presented method is applied to the modeled tiltrotor aircraft for its early and late conversion modes. The optimization scheme shows great improvement in both cases, as the function approximation error is reduced significantly.
Open AccessTraining Sample Pattern Optimization Based on a Swarm Intelligence Algorithm for Tiltrotor Flight Dynamics Model Approximation
Neural networks have been widely used as compensational models for aircraft control designs and as surrogate models for other optimizations. In the case of tiltrotor aircraft, the total number of aircraft states and controls is much greater than that of both traditional fixed-wings and helicopters. This requires, in general, a huge amount of training data for the network to reach a satisfactory approximation precision and makes the network size rise considerably. To solve the practical problem of reducing the size of the approximating network, efforts have to be made in the efficient utilization of the limited amount of training data. This work presents the methodology of optimizing the sample pattern of the training data set by adopting the metaheuristic algorithm of the particle swarm optimizer improved by the fourth-order Runge–Kutta algorithm. A 6-degree-of-freedom nonlinear flight dynamics model of the tiltrotor aircraft is derived, along with its approximation radial basis function neural network. An example case of approximating a highly nonlinear function is studied to illustrate the principle and main parameters of the optimizer, and the approximation performance of the time-domain response of the unstable nonlinear system is revealed by the study of a Van der Pol oscillator. Then, the presented method is applied to the modeled tiltrotor aircraft for its early and late conversion modes. The optimization scheme shows great improvement in both cases, as the function approximation error is reduced significantly.
- Open Access
Hybrid Adaptive Control for Tiltrotor Aircraft Flight Control Law Reconfiguration
Tiltrotor aircrafts have both fixed-wing control surfaces and helicopter rotors for attitude control. The redundancy of control surfaces provides the possibility for the control system to reconfigure the control law when actuator faults occur during flight. Possible actuator faults have been classified into two categories: predictable and unpredictable faults, and a different strategy has been adopted to deal with each kind of fault. Firstly, the predictable faults are handled by a multiple-model switching adaptive scheme. These kinds of faults are modeled, and their corresponding controllers are derived offline. Secondly, since the degree of drop in aerodynamic effectiveness cannot be predicted a priori, unpredictable faults are handled by a simple adaptive control scheme, to force the plant with faults to track the prescribed reference model. The presented methodology has been verified by nonlinear full-envelope flight simulation for both categories of actuator faults. The predictable fault is represented by the elevator floating. Elevator damage causing an aerodynamic effectiveness drop by 80% is chosen as the example of unpredictable fault. Both faults are simulated at the late stage of the tiltrotor conversion mode. Results show that the presented strategy of reconfiguration is able to detect the fault rapidly and stabilize the aircraft when a fault occurs, while the aircraft motion diverges without the reconfiguration scheme. The aircraft also presents a relatively good performance under controller reconfiguration with a well-tracked conversion path.
Open AccessHybrid Adaptive Control for Tiltrotor Aircraft Flight Control Law Reconfiguration
Tiltrotor aircrafts have both fixed-wing control surfaces and helicopter rotors for attitude control. The redundancy of control surfaces provides the possibility for the control system to reconfigure the control law when actuator faults occur during flight. Possible actuator faults have been classified into two categories: predictable and unpredictable faults, and a different strategy has been adopted to deal with each kind of fault. Firstly, the predictable faults are handled by a multiple-model switching adaptive scheme. These kinds of faults are modeled, and their corresponding controllers are derived offline. Secondly, since the degree of drop in aerodynamic effectiveness cannot be predicted a priori, unpredictable faults are handled by a simple adaptive control scheme, to force the plant with faults to track the prescribed reference model. The presented methodology has been verified by nonlinear full-envelope flight simulation for both categories of actuator faults. The predictable fault is represented by the elevator floating. Elevator damage causing an aerodynamic effectiveness drop by 80% is chosen as the example of unpredictable fault. Both faults are simulated at the late stage of the tiltrotor conversion mode. Results show that the presented strategy of reconfiguration is able to detect the fault rapidly and stabilize the aircraft when a fault occurs, while the aircraft motion diverges without the reconfiguration scheme. The aircraft also presents a relatively good performance under controller reconfiguration with a well-tracked conversion path.
- Open Access
Numerical Study on Tandem-Rotor Autorotation in Forward Flight
This work presents a systematic approach to analyzing the aerodynamic characteristics of tandem rotor forward autorotation considering rotor-to-rotor interference. The single-rotor computational model trimmed from a generic helicopter flight dynamics analysis program was used as the baseline model. The effectiveness of the baseline model is demonstrated by a comparison with data from wind tunnel tests performed in this work. The rotor disk angle of attack and driven moment distribution obtained by the modified model indicate the fact that the rotor acceleration is primarily caused by the higher angle of attack region of the disk. This is of great significance in the rotor blade design, in terms of the drag-to-lift ratio characteristics of the airfoil under different angle-of-attack ranges. The influence of wind speed, rotor shaft angle, and collective pitch on the steady-state rotor speed was then studied. The results show a nonlinear nature of the variation of steady rotor speed with collective pitch, which can cause a thrust control reverse problem during flight operations. To reveal the flow field details of rotor-to-rotor interference, the flow field Navier–Stokes equations of tandem rotor autorotation were solved. Computational results of both rotors’ inflow velocities were considered when deriving the empirical model of interference. The refined interference model was compared to the wind tunnel test data of the tandem rotor autorotation and showed good performance. This synthetical methodology, which combines mechanism analysis with CFD-aided refinement and experiment verification, achieves a balance between computational costs and accuracy and thus can be readily applied to engineering practices.
Open AccessNumerical Study on Tandem-Rotor Autorotation in Forward Flight
This work presents a systematic approach to analyzing the aerodynamic characteristics of tandem rotor forward autorotation considering rotor-to-rotor interference. The single-rotor computational model trimmed from a generic helicopter flight dynamics analysis program was used as the baseline model. The effectiveness of the baseline model is demonstrated by a comparison with data from wind tunnel tests performed in this work. The rotor disk angle of attack and driven moment distribution obtained by the modified model indicate the fact that the rotor acceleration is primarily caused by the higher angle of attack region of the disk. This is of great significance in the rotor blade design, in terms of the drag-to-lift ratio characteristics of the airfoil under different angle-of-attack ranges. The influence of wind speed, rotor shaft angle, and collective pitch on the steady-state rotor speed was then studied. The results show a nonlinear nature of the variation of steady rotor speed with collective pitch, which can cause a thrust control reverse problem during flight operations. To reveal the flow field details of rotor-to-rotor interference, the flow field Navier–Stokes equations of tandem rotor autorotation were solved. Computational results of both rotors’ inflow velocities were considered when deriving the empirical model of interference. The refined interference model was compared to the wind tunnel test data of the tandem rotor autorotation and showed good performance. This synthetical methodology, which combines mechanism analysis with CFD-aided refinement and experiment verification, achieves a balance between computational costs and accuracy and thus can be readily applied to engineering practices.