JLJianghai Lin

Jianghai Lin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jianghai Lin has a total of 6 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Study on Factors Influencing Film Formation of Grease and Calculation Model for Grease Film Thickness

    by Zhe Zhang, Yanshuang Wang, Jianghai Lin, Dongfeng Wang

    The grease film thickness was measured in fully flooded elastohydrodynamic lubrication, and the influence of rolling speed, load, consistency, base oil type and thickener type on grease film thickness was analyzed. A new calculation model for grease film thickness was established. The results show that the grease film thickness increases with the increasing rolling speed, and then levels off with the amount of thickener in the contact region reaching an equilibrium. The degree of grease film enhancement comparing to its base oil will depend on thickener type and consistency. The larger the atmospheric viscosity and pressure-viscosity coefficient of the base oil, the higher the film thickness of the greases with the same thickener. The grease film thicknesses with the same base oil and different thickeners are determined by the size of thickener particles at the same consistency or concentration. The larger the consistence of the grease, the larger the effective viscosity of the grease at the contact and the thicker the grease film thickness whose base oil has the same type and viscosity along with the same type of thickener. The calculated values by the new model are in good agreement with the measured values.


  • Open Access

    Rheological and Tribological Properties of Lithium Grease and Polyurea Grease with Different Consistencies

    by Yanshuang Wang, Pu Zhang, Jianghai Lin, Xudong Gao

    The rheological properties of lithium grease and polyurea grease at different temperatures and consistencies were determined with a rotary rheometer. The plateau moduli of the greases were calculated, and the mechanism of influence of consistency and temperature on the rheological properties of the greases was explained. The tribological and wear properties of the two greases were measured by high-temperature friction and wear tester. The friction and wear mechanisms are probed by the rheological properties of lubricating grease. The results show that the plateau modulus GN can be used to assess the structural strength of different greases, but it can only assess the degree of entanglement of the same grease. The higher the consistency of the grease, the larger the apparent viscosity, structural strength, and yield stress. The rheological properties of PAO-polyurea grease are greatly affected by temperature, but its structural strength is better than that of mineral oil-lithium grease. The consistency of mineral oil-lithium grease is expected to affect the friction coefficient and wear through its influence on the grease’s structural strength and film-forming ability. For PAO-polyurea, the consistency in a certain range has little effect on the friction coefficient and wear resistance.


  • Open Access

    Rheological and Frictional Properties of Lithium Complex Grease with Graphene Additives

    by Yanshuang Wang, Xudong Gao, Jianghai Lin, Pu Zhang

    Few-layer graphene (FLG) was added as a nano-additive to lithium complex grease (LCG) to explore the influence of FLG on the microstructure, viscoelasticity, friction and wear properties of LCG. Studies have found that the addition of FLG makes the microstructure of the thickener more compact, which in turn leads to an increase in the viscoelasticity of LCG. FLG additives can improve the viscosity-temperature properties of the grease and change the elastic deformation response to temperature changes. Among the temperatures selected in this article, the effect of graphene is more obvious at 70 °C. During the friction process, a proper amount of FLG can quickly form a boundary film and is not easily damaged, thereby optimizing the friction and wear performance of LCG.