Cheng Shi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Cheng Shi has a total of 53 co-authors. Here are the top co-authors by number of shared publications:
- Huaiyu Wang
Beijing Institute of Technology
3 shared publications Jianhui Bao
3 shared publicationsLiming Di
School of Vehicle and Energy Yanshan University Qinhuangdao China
3 shared publicationsChangwei Ji
1 shared publication- Changwei Ji
College of Environmental and Energy Engineering, Beijing Lab of New Energy Vehicles and Key Lab of Regional Air Pollution Control, Beijing University of Technology, Beijing, People’s Republic of China
1 shared publication Chong Liu
1 shared publication
Latest Publications
- 16 November 2026
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 292
Investigation of Flow, Mixing, and Combustion in a Hydrogen Direct Injection Rotary Engine
- 16 November 2026
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 292
Investigation of Flow, Mixing, and Combustion in a Hydrogen Direct Injection Rotary Engine
- 25 August 2026
- Published by Elsevier in Sustainable Energy Technologies and Assessments
- Vol. 93
Acoustic and ultrasonic combustion control in thermal energy systems: a review
- 25 August 2026
- Published by Elsevier in Sustainable Energy Technologies and Assessments
- Vol. 93
Acoustic and ultrasonic combustion control in thermal energy systems: a review
- Open Access
- 17 December 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (24) , 11323
Experimental Investigation on Spray Characteristics of Polymethoxy Dimethyl Ether as a Sustainable Fuel Applied to Diesel Engine
As global efforts to combat climate change and promote sustainable development intensify, PODEn, as an innovative type of clean, sustainable fuel, has gained growing attention for its potential to support eco-friendly energy transitions, especially concerning the spray characteristics of its blended fuels. Environmental conditions are crucial in the fuel spraying process, which is essential for optimizing combustion efficiency and reducing emissions—key elements of sustainable energy use and climate action. In this study, the parameters of spray morphology, droplet size distribution, and velocity were accurately measured using a constant-volume combustor and high-speed photography. The results demonstrate that as ambient pressure increases, both the spray cone angle and boundary gas entrainment volume increase, while the spray penetration distance and spray volume decrease. These changes, driven by pressure differences and variations in gas density that influence droplet movement and fragmentation, are critical for optimizing fuel injection strategies to enhance combustion efficiency and reduce environmental impact. This aligns closely with the Sustainable Development Goals focused on clean energy, responsible consumption, and climate mitigation. Conversely, as ambient temperature rises, the penetration distance and spray volume increase, whereas the entrainment volume decreases and the spray cone angle narrows. This phenomenon results from the combined effects of temperature on gas density, viscosity, evaporation rate, and convective flow, underscoring the need for adaptive engine designs that leverage these characteristics to improve fuel efficiency and reduce carbon emissions—an essential step toward sustainable development in the energy and automotive sectors.
- 17 December 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (24) , 11323
Open AccessExperimental Investigation on Spray Characteristics of Polymethoxy Dimethyl Ether as a Sustainable Fuel Applied to Diesel Engine
As global efforts to combat climate change and promote sustainable development intensify, PODEn, as an innovative type of clean, sustainable fuel, has gained growing attention for its potential to support eco-friendly energy transitions, especially concerning the spray characteristics of its blended fuels. Environmental conditions are crucial in the fuel spraying process, which is essential for optimizing combustion efficiency and reducing emissions—key elements of sustainable energy use and climate action. In this study, the parameters of spray morphology, droplet size distribution, and velocity were accurately measured using a constant-volume combustor and high-speed photography. The results demonstrate that as ambient pressure increases, both the spray cone angle and boundary gas entrainment volume increase, while the spray penetration distance and spray volume decrease. These changes, driven by pressure differences and variations in gas density that influence droplet movement and fragmentation, are critical for optimizing fuel injection strategies to enhance combustion efficiency and reduce environmental impact. This aligns closely with the Sustainable Development Goals focused on clean energy, responsible consumption, and climate mitigation. Conversely, as ambient temperature rises, the penetration distance and spray volume increase, whereas the entrainment volume decreases and the spray cone angle narrows. This phenomenon results from the combined effects of temperature on gas density, viscosity, evaporation rate, and convective flow, underscoring the need for adaptive engine designs that leverage these characteristics to improve fuel efficiency and reduce carbon emissions—an essential step toward sustainable development in the energy and automotive sectors.
- 9 January 2024
- Published by Society of Petroleum Engineers (SPE) in SPE Journal
- Vol. 29 (05) , 2525-2544
Experimental Study on Permeability and Gas Production Characteristics of Montmorillonite Hydrate Sediments Considering the Effective Stress and Gas Slippage Effect
Summary: Gas permeability in hydrate reservoirs is the decisive parameter in determining the gas production efficiency and gas production of hydrate. In the South China Sea (SCS), the gas flow in tight natural gas hydrate (NGH) silty clay reservoirs is significantly affected by the gas slippage effect and the effective stress (ES) of overlying rock. To improve the effectiveness of hydrate exploitation, it is necessary to understand the influence of gas slippage in hydrate reservoirs on the permeability evolution law. For this paper, the gas permeability characteristics and methane production of hydrate montmorillonite sediments were studied at different pore pressures and ESs. Experimental data revealed that the gas permeability of montmorillonite samples before methane hydrate (MH) formation is seriously affected by the Klinkenberg effect. The gas permeability of montmorillonite sediments before hydrate formation is generally smaller than that after hydrate formation, and the gas slippage effect in the sediments after hydrate formation is weaker than that before hydrate formation. With the change in ES, the intrinsic permeability of sediment has a power law relationship with the simple ES. The ES law coefficient n was determined using the response surface method to eliminate the influence of gas slip on gas permeability. As pore pressure decreases and MH decomposes, montmorillonite swelling seriously affects gas permeability. However, the gas slippage effect has a good compensation effect on the permeability of montmorillonite sediments after MH decomposition under low pore pressure. The multistage depressurization-producing process of MH in montmorillonite sediments is mainly 3 MPa depressurization-producing stage and 2 MPa depressurization-producing stage. In this paper, the influence mechanism of gas slippage effect of hydrate reservoir is studied, which is conducive to improving the prediction accuracy of gas content in the process of hydrate exploitation and exploring the best pressure reduction method to increase the gas production of hydrate in the process of exploitation.
- 9 January 2024
- Published by Society of Petroleum Engineers (SPE) in SPE Journal
- Vol. 29 (05) , 2525-2544
Experimental Study on Permeability and Gas Production Characteristics of Montmorillonite Hydrate Sediments Considering the Effective Stress and Gas Slippage Effect
Summary: Gas permeability in hydrate reservoirs is the decisive parameter in determining the gas production efficiency and gas production of hydrate. In the South China Sea (SCS), the gas flow in tight natural gas hydrate (NGH) silty clay reservoirs is significantly affected by the gas slippage effect and the effective stress (ES) of overlying rock. To improve the effectiveness of hydrate exploitation, it is necessary to understand the influence of gas slippage in hydrate reservoirs on the permeability evolution law. For this paper, the gas permeability characteristics and methane production of hydrate montmorillonite sediments were studied at different pore pressures and ESs. Experimental data revealed that the gas permeability of montmorillonite samples before methane hydrate (MH) formation is seriously affected by the Klinkenberg effect. The gas permeability of montmorillonite sediments before hydrate formation is generally smaller than that after hydrate formation, and the gas slippage effect in the sediments after hydrate formation is weaker than that before hydrate formation. With the change in ES, the intrinsic permeability of sediment has a power law relationship with the simple ES. The ES law coefficient n was determined using the response surface method to eliminate the influence of gas slip on gas permeability. As pore pressure decreases and MH decomposes, montmorillonite swelling seriously affects gas permeability. However, the gas slippage effect has a good compensation effect on the permeability of montmorillonite sediments after MH decomposition under low pore pressure. The multistage depressurization-producing process of MH in montmorillonite sediments is mainly 3 MPa depressurization-producing stage and 2 MPa depressurization-producing stage. In this paper, the influence mechanism of gas slippage effect of hydrate reservoir is studied, which is conducive to improving the prediction accuracy of gas content in the process of hydrate exploitation and exploring the best pressure reduction method to increase the gas production of hydrate in the process of exploitation.
- Open Access
- 15 May 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (10) , 8034
A Migration Learning Method Based on Adaptive Batch Normalization Improved Rotating Machinery Fault Diagnosis
Sustainable development has become increasingly important as one of the key research directions for the future. In the field of rotating machinery, stable operation and sustainable performance are critical, focusing on the fault diagnosis of component bearings. However, traditional normalization methods are ineffective in target domain data due to the difference in data distribution between the source and target domains. To overcome this issue, this paper proposes a bearing fault diagnosis method based on the adaptive batch normalization algorithm, which aims to enhance the generalization ability of the model in different data distributions and environments. The adaptive batch normalization algorithm improves the adaptability and generalization ability to better respond to changes in data distribution and the real-time requirements of practical applications. This algorithm replaces the statistical values in a BN with domain adaptive mean and variance statistics to minimize feature differences between two different domains. Experimental results show that the proposed method outperforms other methods in terms of performance and generalization ability, effectively solving the problems of data distribution changes and real-time requirements in bearing fault diagnosis. The research results indicate that the adaptive batch normalization algorithm is a feasible method to improve the accuracy and reliability of bearing fault diagnosis.
- 15 May 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (10) , 8034
Open AccessA Migration Learning Method Based on Adaptive Batch Normalization Improved Rotating Machinery Fault Diagnosis
Sustainable development has become increasingly important as one of the key research directions for the future. In the field of rotating machinery, stable operation and sustainable performance are critical, focusing on the fault diagnosis of component bearings. However, traditional normalization methods are ineffective in target domain data due to the difference in data distribution between the source and target domains. To overcome this issue, this paper proposes a bearing fault diagnosis method based on the adaptive batch normalization algorithm, which aims to enhance the generalization ability of the model in different data distributions and environments. The adaptive batch normalization algorithm improves the adaptability and generalization ability to better respond to changes in data distribution and the real-time requirements of practical applications. This algorithm replaces the statistical values in a BN with domain adaptive mean and variance statistics to minimize feature differences between two different domains. Experimental results show that the proposed method outperforms other methods in terms of performance and generalization ability, effectively solving the problems of data distribution changes and real-time requirements in bearing fault diagnosis. The research results indicate that the adaptive batch normalization algorithm is a feasible method to improve the accuracy and reliability of bearing fault diagnosis.
- Top Cited PapersOpen Access
- 17 February 2023
- Published by Wiley in Energy Science & Engineering
- Vol. 11 (5) , 1579-1588
Comparative experimental study on macroscopic spray characteristics of various oxygenated diesel fuels
Under high ambient pressure (5 MPa) and different injection pressures (90, 120, and 150 MPa), a high‐speed imaging technique was carried out to comparatively investigate the macroscopic spray characteristics of diesel with three different types of blended fuel in a constant volume chamber. The oxygenated fuels were n‐butanol (B), pine oil (P), and 2,5‐dimethylfuran (DMF). All their blending ratio with diesel were 20%. Results showed that less viscosity could be improved the spray characteristics of the fuel in the range of experimental conditions. Then, the tested fuels had a longer penetration and a greater spray area with increasing the injection pressure from 90 to 150 MPa. On the other hand, the percentage increases in the mean spray cone angle of D100, B20, P20, and DMF20 were 3%, 4.4%, 2.4%, and 2.9%, respectively. At the same experimental condition, the spray penetrations of DMF20 and P20 were larger than that of D100, but the spray penetration of B20 was basically similar to D100. Besides, the performance of the spray cone angle and spray area were D100 < B20 < P20 < DMF20. In addition, the comprehensive influence was that blending oxygenated fuels would be a benefit for developing fuel atomization and the air–fuel mixture of conventional diesel fuel.
- 17 February 2023
- Published by Wiley in Energy Science & Engineering
- Vol. 11 (5) , 1579-1588
Top Cited PapersOpen AccessComparative experimental study on macroscopic spray characteristics of various oxygenated diesel fuels
Under high ambient pressure (5 MPa) and different injection pressures (90, 120, and 150 MPa), a high‐speed imaging technique was carried out to comparatively investigate the macroscopic spray characteristics of diesel with three different types of blended fuel in a constant volume chamber. The oxygenated fuels were n‐butanol (B), pine oil (P), and 2,5‐dimethylfuran (DMF). All their blending ratio with diesel were 20%. Results showed that less viscosity could be improved the spray characteristics of the fuel in the range of experimental conditions. Then, the tested fuels had a longer penetration and a greater spray area with increasing the injection pressure from 90 to 150 MPa. On the other hand, the percentage increases in the mean spray cone angle of D100, B20, P20, and DMF20 were 3%, 4.4%, 2.4%, and 2.9%, respectively. At the same experimental condition, the spray penetrations of DMF20 and P20 were larger than that of D100, but the spray penetration of B20 was basically similar to D100. Besides, the performance of the spray cone angle and spray area were D100 < B20 < P20 < DMF20. In addition, the comprehensive influence was that blending oxygenated fuels would be a benefit for developing fuel atomization and the air–fuel mixture of conventional diesel fuel.
- Open Access
- 28 November 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (23) , 15809
Effect of a Taper Intake Port on the Combustion Characteristics of a Small-Scale Rotary Engine
Taper intake ports are effective in improving the charging efficiency of small-scale rotary engines (REs), but it is unclear how their structural parameters affect the in-cylinder flow field and combustion characteristics. For this reason, the effects of the diameter-length ratio (D/L) of an intake port on the in-cylinder flow field and combustion characteristics of a small-scale RE were numerically investigated by utilizing a three-dimensional computational fluid dynamics (CFD) model. The results showed that the in-cylinder pressure of the RE did not follow a simple single-directional trend with the D/L of the intake port, but it was divided into three levels, where the peak in-cylinder pressure was at its maximum at the D/L of 0.6 and at its minimum at the D/L of 0.8. The gas flows in the intake port with different values of the D/L were all unidirectional, and they made a difference in the vortexes formed on the leading side of the combustion chamber of the RE, which was the main factor affecting the in-cylinder combustion performance. The vortexes formed on the leading side of the combustion chamber with D/L = 0.6 were maintained for a long period of time, thus promoting the propagation of flame and advancing the center of gravity of combustion. So, the heat release rate and combustion efficiency in the cylinder were increased at the price of a larger increment in nitrogen oxide formation.
- 28 November 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (23) , 15809
Open AccessEffect of a Taper Intake Port on the Combustion Characteristics of a Small-Scale Rotary Engine
Taper intake ports are effective in improving the charging efficiency of small-scale rotary engines (REs), but it is unclear how their structural parameters affect the in-cylinder flow field and combustion characteristics. For this reason, the effects of the diameter-length ratio (D/L) of an intake port on the in-cylinder flow field and combustion characteristics of a small-scale RE were numerically investigated by utilizing a three-dimensional computational fluid dynamics (CFD) model. The results showed that the in-cylinder pressure of the RE did not follow a simple single-directional trend with the D/L of the intake port, but it was divided into three levels, where the peak in-cylinder pressure was at its maximum at the D/L of 0.6 and at its minimum at the D/L of 0.8. The gas flows in the intake port with different values of the D/L were all unidirectional, and they made a difference in the vortexes formed on the leading side of the combustion chamber of the RE, which was the main factor affecting the in-cylinder combustion performance. The vortexes formed on the leading side of the combustion chamber with D/L = 0.6 were maintained for a long period of time, thus promoting the propagation of flame and advancing the center of gravity of combustion. So, the heat release rate and combustion efficiency in the cylinder were increased at the price of a larger increment in nitrogen oxide formation.
- Top Cited Papers
- 10 June 2022
- Published by Elsevier in Chemosphere
- Vol. 303 (Pt 3) , 135275
Implementation of various bowl designs in an HPDI natural gas engine focused on performance and pollutant emissions
- 10 June 2022
- Published by Elsevier in Chemosphere
- Vol. 303 (Pt 3) , 135275
Top Cited PapersImplementation of various bowl designs in an HPDI natural gas engine focused on performance and pollutant emissions
- 10 May 2022
- Published by Elsevier in Chemosphere
- Vol. 302, 134924
Effect of ultrasonic-fed time on combustion and emissions performance in a single-cylinder engine
- 10 May 2022
- Published by Elsevier in Chemosphere
- Vol. 302, 134924
Effect of ultrasonic-fed time on combustion and emissions performance in a single-cylinder engine
- 2 April 2022
- Published by Elsevier in Chemosphere
- Vol. 299, 134491
Potential improvement in combustion and pollutant emissions of a hydrogen-enriched rotary engine by using novel recess configuration
- 2 April 2022
- Published by Elsevier in Chemosphere
- Vol. 299, 134491
Potential improvement in combustion and pollutant emissions of a hydrogen-enriched rotary engine by using novel recess configuration