Sajjad Chehreghani
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sajjad Chehreghani has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Aref Alipour
Department of Mining Engineering, Urmia University of Technology, Urmia, Iran
2 shared publications Ataallah Bahrami
Department of Mining Engineering, Faculty of Engineering, Urmia University, Urmia - Iran
2 shared publicationsFatemeh Kazemi
PhD student of mineral processing, Faculty of Engineering, University of Kashan, Kashan – Iran
2 shared publications- Hamid Chakeri
Department of Mining Engineering, Sahand University of Technology, Tabriz, Iran
2 shared publications Hassan Maleki
School of Mining Engineering, College of Engineering, University of Tehran, Tehran, Iran
2 shared publications- Hojjat Hosseinzadeh Gharehgheshlagh
Mining Engineering Department, Faculty of Environment, Urmia University of Technology (UUT), Box: 57155-419, Postal code: 5716693188, Band road, Urmia, West Azerbaijan, Iran
2 shared publications
Latest Publications
- 6 August 2024
- Published by Taylor & Francis in Soil and Sediment Contamination: An International Journal
- Vol. 34 (5) , 842-866
Evaluation of the Pollution by the Potentially Toxic Elements in the Topsoils of a Semi-Industrial Zone, Northwestern Iran
- 6 August 2024
- Published by Taylor & Francis in Soil and Sediment Contamination: An International Journal
- Vol. 34 (5) , 842-866
Evaluation of the Pollution by the Potentially Toxic Elements in the Topsoils of a Semi-Industrial Zone, Northwestern Iran
- Open Access
- 1 January 2023
- Published by Faculty of Mining, Geology and Petroleum Engineering in Rudarsko-geološko-naftni zbornik
- Vol. 38 (2) , 75-85
DISSOLUTION KINETICS OF A COPPER OXIDE ORE SAMPLE AND OPTIMIZING THE EFFECTIVE PARAMETERS, USING RESPONSE SURFACE METHODOLOGY
In this research work, the leaching behavior of a copper oxide ore sample prepared from the Qaleh-Zari copper mine with a very high grade of 5.4% Cu (malachite and azurite) was investigated to evaluate the effects of significant operating parameters on copper recovery, including sulfuric acid concentration, solid percentage, particle size and agitation speed. Then, response surface methodology (RSM) and central composite design (CCD) were employed to optimize the leaching process and assess interactions between the effective parameters. In order to further analyze the leaching behavior, kinetics of copper dissolution was studied on the basis of the shrinking core models (SCM). The results showed a reduction in the rate of recovery with an increase in the solid percentage and/or particle size. In contrast, any increase in the agitation speed and/or acid concentration was found to improve the recovery. It was remarkable that increasing the sulfuric acid content, beyond a certain level, imposed no significant effect on the recovery. Optimal copper recovery was obtained with a solid percentage, agitation speed, particle size, and sulfuric acid concentration of 25.12%, 586 rpm, 70 μm, and 12.5%, respectively, leading to a recovery of 93.24%. A study on the leaching kinetics indicated that the dissolution rate was controlled by the fluid diffusion from product layer model with 30.71 kJ/mol of activation energy.
- 1 January 2023
- Published by Faculty of Mining, Geology and Petroleum Engineering in Rudarsko-geološko-naftni zbornik
- Vol. 38 (2) , 75-85
Open AccessDISSOLUTION KINETICS OF A COPPER OXIDE ORE SAMPLE AND OPTIMIZING THE EFFECTIVE PARAMETERS, USING RESPONSE SURFACE METHODOLOGY
In this research work, the leaching behavior of a copper oxide ore sample prepared from the Qaleh-Zari copper mine with a very high grade of 5.4% Cu (malachite and azurite) was investigated to evaluate the effects of significant operating parameters on copper recovery, including sulfuric acid concentration, solid percentage, particle size and agitation speed. Then, response surface methodology (RSM) and central composite design (CCD) were employed to optimize the leaching process and assess interactions between the effective parameters. In order to further analyze the leaching behavior, kinetics of copper dissolution was studied on the basis of the shrinking core models (SCM). The results showed a reduction in the rate of recovery with an increase in the solid percentage and/or particle size. In contrast, any increase in the agitation speed and/or acid concentration was found to improve the recovery. It was remarkable that increasing the sulfuric acid content, beyond a certain level, imposed no significant effect on the recovery. Optimal copper recovery was obtained with a solid percentage, agitation speed, particle size, and sulfuric acid concentration of 25.12%, 586 rpm, 70 μm, and 12.5%, respectively, leading to a recovery of 93.24%. A study on the leaching kinetics indicated that the dissolution rate was controlled by the fluid diffusion from product layer model with 30.71 kJ/mol of activation energy.
- 1 January 2023
- Published by Faculty of Mining, Geology and Petroleum Engineering in Rudarsko-geološko-naftni zbornik
- Vol. 38 (1) , 59-68
OPTIMIZATION OF FLOTATION OF THE QALEH ZARI MINE OXIDIZED COPPER ORE SAMPLE BY THE SEQUENTIAL SULFIDATION APPROACH USING THE RESPONSE SURFACE METHOD TECHNIQUE
One of the main challenges in the copper oxide processing industry is the application of flotation to reduce operating costs. Sulfidation-flotation is a commonly employed approach for floating oxide minerals using sulfidizers in order to sulfide the mineral’s surface. In this research work, an oxidized sample from the Qaleh Zari copper mine was used which was a high grade with 5.4% of copper (malachite and azurite). The prepared sample was subjected to mineralogical studies, and the obtained results indicated that the sample was oxidized. Malachite and azurite were the predominant minerals of copper oxide, and the predominant waste minerals were quartz and iron oxides (hematite and magnetite). The addition of sodium sulfide and flotation in four consecutive steps was a successful approach to meet the proper recovery and grade. Sodium sulfide, amyl potassium xanthate, sodium sulfide preparation time, and pH were selected as operating parameters using a central composite design (CCD). Also, by measuring the zeta potential, the electric charge of malachite was determined in different conditions after adding chemicals. Finally, under optimal conditions, the consumptions of sodium sulfide and amyl potassium xanthate, sodium sulfide preparation time, and pH value were 6790 g/t, 736 g/t, 10 minutes, and 9, respectively. By applying the mentioned conditions, a concentrate with a grade of 22.13%Cu and 90.51% recovery was achieved.
- 1 January 2023
- Published by Faculty of Mining, Geology and Petroleum Engineering in Rudarsko-geološko-naftni zbornik
- Vol. 38 (1) , 59-68
OPTIMIZATION OF FLOTATION OF THE QALEH ZARI MINE OXIDIZED COPPER ORE SAMPLE BY THE SEQUENTIAL SULFIDATION APPROACH USING THE RESPONSE SURFACE METHOD TECHNIQUE
One of the main challenges in the copper oxide processing industry is the application of flotation to reduce operating costs. Sulfidation-flotation is a commonly employed approach for floating oxide minerals using sulfidizers in order to sulfide the mineral’s surface. In this research work, an oxidized sample from the Qaleh Zari copper mine was used which was a high grade with 5.4% of copper (malachite and azurite). The prepared sample was subjected to mineralogical studies, and the obtained results indicated that the sample was oxidized. Malachite and azurite were the predominant minerals of copper oxide, and the predominant waste minerals were quartz and iron oxides (hematite and magnetite). The addition of sodium sulfide and flotation in four consecutive steps was a successful approach to meet the proper recovery and grade. Sodium sulfide, amyl potassium xanthate, sodium sulfide preparation time, and pH were selected as operating parameters using a central composite design (CCD). Also, by measuring the zeta potential, the electric charge of malachite was determined in different conditions after adding chemicals. Finally, under optimal conditions, the consumptions of sodium sulfide and amyl potassium xanthate, sodium sulfide preparation time, and pH value were 6790 g/t, 736 g/t, 10 minutes, and 9, respectively. By applying the mentioned conditions, a concentrate with a grade of 22.13%Cu and 90.51% recovery was achieved.
- 1 January 2023
- Published by Faculty of Mining, Geology and Petroleum Engineering in Rudarsko-geološko-naftni zbornik
- Vol. 38 (1) , 69-82
EFFECTS OF VARIOUS GRINDING AIDS DOSAGE ON COMMINUTION EFFICIENCY AND CEMENT CHARACTERISTICS
Grinding aids are materials that are added to cement mixtures to improve the characteristics of the cement or increase the efficiency of the milling systems or both in the clinker grinding (finish grinding) stage. In this study, the effects of four g...
- 1 January 2023
- Published by Faculty of Mining, Geology and Petroleum Engineering in Rudarsko-geološko-naftni zbornik
- Vol. 38 (1) , 69-82
EFFECTS OF VARIOUS GRINDING AIDS DOSAGE ON COMMINUTION EFFICIENCY AND CEMENT CHARACTERISTICS
Grinding aids are materials that are added to cement mixtures to improve the characteristics of the cement or increase the efficiency of the milling systems or both in the clinker grinding (finish grinding) stage. In this study, the effects of four g...
- 30 December 2022
- Published by Dnipro University of Technology in Mining of Mineral Deposits
- Vol. 16 (4) , 47-55
Analytical and numerical study of one-dimensional and two-dimensional stress distribution within an elastic semi-infinite material under the action of an arbitrary rectangular uniform loading
Purpose. The study of stress distribution within an elastic semi-infinite material under the action of an external loading is of great importance in the theory of elasticity. In most cases, the lack of knowledge about the stress distribution within a material can result in incomplete and inappropriate engineering designs, leading to unsatisfactory consequences. The latter include cracks and fractures, created inside the concrete segmental lining in TBM tunneling, as well as indentations that occur in floors due to the lack of pillar design not only in underground mining, but even in civil projects. This study focuses on the one-dimensional and two-dimensional internal stress distribution induced by arbitrary rectangular–square loading, in other words, that applied to an elastic semi-infinite material. Methods. Firstly, this paper uses an analytical method and, subsequently, a numerical method. In the analytical study, the point load equations of Boussinesq and Westergaard are used. Extending these equations to the rectangular loading area, four new equations are introduced. Using the Abaqus finite element software, the numerical study is performed in 3D space. Findings. The results show that the answers from the introduced equations are in high consistency with numerical ones. However, the result of the extended Boussinesq point load equation is closer to the answer obtained by the numerical method. Originality. Four new equations, presented in this paper, describe one-dimensional and two-dimensional stress distribution. Practical implications. The presented equations can provide a simple and convenient way to solve rectangular load problems in many cases such as foundation, civil and mining projects. This study uses initial information on specific segments in the Tabriz Metro line-2 Project.
- 30 December 2022
- Published by Dnipro University of Technology in Mining of Mineral Deposits
- Vol. 16 (4) , 47-55
Analytical and numerical study of one-dimensional and two-dimensional stress distribution within an elastic semi-infinite material under the action of an arbitrary rectangular uniform loading
Purpose. The study of stress distribution within an elastic semi-infinite material under the action of an external loading is of great importance in the theory of elasticity. In most cases, the lack of knowledge about the stress distribution within a material can result in incomplete and inappropriate engineering designs, leading to unsatisfactory consequences. The latter include cracks and fractures, created inside the concrete segmental lining in TBM tunneling, as well as indentations that occur in floors due to the lack of pillar design not only in underground mining, but even in civil projects. This study focuses on the one-dimensional and two-dimensional internal stress distribution induced by arbitrary rectangular–square loading, in other words, that applied to an elastic semi-infinite material. Methods. Firstly, this paper uses an analytical method and, subsequently, a numerical method. In the analytical study, the point load equations of Boussinesq and Westergaard are used. Extending these equations to the rectangular loading area, four new equations are introduced. Using the Abaqus finite element software, the numerical study is performed in 3D space. Findings. The results show that the answers from the introduced equations are in high consistency with numerical ones. However, the result of the extended Boussinesq point load equation is closer to the answer obtained by the numerical method. Originality. Four new equations, presented in this paper, describe one-dimensional and two-dimensional stress distribution. Practical implications. The presented equations can provide a simple and convenient way to solve rectangular load problems in many cases such as foundation, civil and mining projects. This study uses initial information on specific segments in the Tabriz Metro line-2 Project.
- 30 March 2022
- Published by Dnipro University of Technology in Mining of Mineral Deposits
- Vol. 16 (1) , 92-100
Stability analysis and support system design of Angouran underground mine batching room
- 30 March 2022
- Published by Dnipro University of Technology in Mining of Mineral Deposits
- Vol. 16 (1) , 92-100
Stability analysis and support system design of Angouran underground mine batching room
- 1 January 2022
- Published by Faculty of Mining, Geology and Petroleum Engineering in Rudarsko-geološko-naftni zbornik
- Vol. 37 (2) , 123-135
POWER CONSUMPTION MANAGEMENT AND SIMULATION OF OPTIMIZED OPERATIONAL CONDITIONS OF BALL MILLS USING THE MORRELL POWER MODEL: A CASE STUDY
The amount of comminution or fineness of minerals in a mill can be described by various parameters, the most important of which is d80 (80% passing size). The purpose of this study is to investigate and simulate the optimal operating conditions of a ball mill in a copper processing plant. The actual operating conditions in the intended mill are performed with a 300 tph tonnage, a 267 second retention time, and a discharge d80 = 53 μm. Laboratory studies showed that the optimal economical and metallurgical recovery of copper in this plant is achieved in 65 μm ≤ d80 ≤ 75 μm with Flotation Recovery (R) = 90.16%, Economical Efficiency (EE) = 93.04% and Separation Efficiency (SE) = 88.64%. In this study, having the optimal d80 for the concentration unit, the mill data, and utilizing Excel Software and the Morrell method, first the total power for the optimal set of d80 was calculated, which is equal to 7790 to 8005 kW. Then, according to these power values, the corresponding retention times were calculated, which are equal to 236 and 247 seconds respectively. Finally, utilizing the retention time-tonnage relationship and taking into account the specific filling of the mill, the optimal corresponding tonnages to the obtained retention times were calculated, ranging from 324 to 340 tph. The results of these studies showed that by reducing the level of comminution from d80 = 53 μm to 65 μm ≤ d80 ≤ 75 μm, in addition to increasing flotation efficiency to R = 90.16%, EE = 93.04% and SE = 88.64%, about 4.21% to 7.09% energy savings and an 8.00% to 13.33% tonnage increase will occur.
- 1 January 2022
- Published by Faculty of Mining, Geology and Petroleum Engineering in Rudarsko-geološko-naftni zbornik
- Vol. 37 (2) , 123-135
POWER CONSUMPTION MANAGEMENT AND SIMULATION OF OPTIMIZED OPERATIONAL CONDITIONS OF BALL MILLS USING THE MORRELL POWER MODEL: A CASE STUDY
The amount of comminution or fineness of minerals in a mill can be described by various parameters, the most important of which is d80 (80% passing size). The purpose of this study is to investigate and simulate the optimal operating conditions of a ball mill in a copper processing plant. The actual operating conditions in the intended mill are performed with a 300 tph tonnage, a 267 second retention time, and a discharge d80 = 53 μm. Laboratory studies showed that the optimal economical and metallurgical recovery of copper in this plant is achieved in 65 μm ≤ d80 ≤ 75 μm with Flotation Recovery (R) = 90.16%, Economical Efficiency (EE) = 93.04% and Separation Efficiency (SE) = 88.64%. In this study, having the optimal d80 for the concentration unit, the mill data, and utilizing Excel Software and the Morrell method, first the total power for the optimal set of d80 was calculated, which is equal to 7790 to 8005 kW. Then, according to these power values, the corresponding retention times were calculated, which are equal to 236 and 247 seconds respectively. Finally, utilizing the retention time-tonnage relationship and taking into account the specific filling of the mill, the optimal corresponding tonnages to the obtained retention times were calculated, ranging from 324 to 340 tph. The results of these studies showed that by reducing the level of comminution from d80 = 53 μm to 65 μm ≤ d80 ≤ 75 μm, in addition to increasing flotation efficiency to R = 90.16%, EE = 93.04% and SE = 88.64%, about 4.21% to 7.09% energy savings and an 8.00% to 13.33% tonnage increase will occur.
- 1 January 2022
- Published by Faculty of Mining, Geology and Petroleum Engineering in Rudarsko-geološko-naftni zbornik
- Vol. 37 (1) , 1-9
Mapping specular hematite ore beneficiation routes to industrial application standards
The purpose of this study is to determine the appropriate method for micaceous iron ore processing and production per-industrial application standards. After identifying the characteristics of the samples (with XRF, XRD, mineralogical analyzes), grav...
- 1 January 2022
- Published by Faculty of Mining, Geology and Petroleum Engineering in Rudarsko-geološko-naftni zbornik
- Vol. 37 (1) , 1-9
Mapping specular hematite ore beneficiation routes to industrial application standards
The purpose of this study is to determine the appropriate method for micaceous iron ore processing and production per-industrial application standards. After identifying the characteristics of the samples (with XRF, XRD, mineralogical analyzes), grav...
- 1 January 2021
- Published by Faculty of Mining, Geology and Petroleum Engineering in Rudarsko-geološko-naftni zbornik
- Vol. 36 (4) , 121-137
The microwave irradiation effect on the floatability of mixed sulphide/oxide copper ores
Pre-treatment of copper sulphide and oxide ores using microwave radiation causes a difference in their floatability through change in the surface properties of the minerals. The aim of this study is to investigate the behaviour of Sungun porphyry copper ore under the influence of microwave radiation. In this regard, the feed sample of Sungun copper flotation circuit has been subjected to microwave irradiation for 0-120 s and a radiation power of 0-600 W. The prepared samples were then subjected to flotation experiments. According to the results, the grade of sulphide and oxide Cu minerals, as well as the grade of Fe, increased by microwave irradiation in all experiments compared to the non-irradiated samples. At the same time, recovery rate has a reversed trend and decreased in all cases. Variations in the recovery rates of copper oxides and sulphides due to microwave irradiation are different. Increasing the power of irradiation resulted in a greater reduction in the recovery of copper oxides than of sulphides. On the other hand, increasing the power of microwave irradiation reduced the amount of iron recovery in the copper concentrate and with an increase in the duration of microwave irradiation, the reduction of iron recovery values is even more pronounced. Changes in the power and duration of microwave radiation have not had a significant effect on variations in oxide copper grade in flotation tailings. While the grade of sulphides in tailing is affected by the parameters of microwave irradiation and with an increase in power and duration of microwave irradiation, the grade of copper in tailing increases.
- 1 January 2021
- Published by Faculty of Mining, Geology and Petroleum Engineering in Rudarsko-geološko-naftni zbornik
- Vol. 36 (4) , 121-137
The microwave irradiation effect on the floatability of mixed sulphide/oxide copper ores
Pre-treatment of copper sulphide and oxide ores using microwave radiation causes a difference in their floatability through change in the surface properties of the minerals. The aim of this study is to investigate the behaviour of Sungun porphyry copper ore under the influence of microwave radiation. In this regard, the feed sample of Sungun copper flotation circuit has been subjected to microwave irradiation for 0-120 s and a radiation power of 0-600 W. The prepared samples were then subjected to flotation experiments. According to the results, the grade of sulphide and oxide Cu minerals, as well as the grade of Fe, increased by microwave irradiation in all experiments compared to the non-irradiated samples. At the same time, recovery rate has a reversed trend and decreased in all cases. Variations in the recovery rates of copper oxides and sulphides due to microwave irradiation are different. Increasing the power of irradiation resulted in a greater reduction in the recovery of copper oxides than of sulphides. On the other hand, increasing the power of microwave irradiation reduced the amount of iron recovery in the copper concentrate and with an increase in the duration of microwave irradiation, the reduction of iron recovery values is even more pronounced. Changes in the power and duration of microwave radiation have not had a significant effect on variations in oxide copper grade in flotation tailings. While the grade of sulphides in tailing is affected by the parameters of microwave irradiation and with an increase in power and duration of microwave irradiation, the grade of copper in tailing increases.