Simcha K. Mirsky
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Simcha K. Mirsky has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Itay Barnea
Tel Aviv Univ. (Israel)
5 shared publications - Natan Tzvi Shaked
Department of Biomedical Engineering Tel Aviv University Tel Aviv Israel
5 shared publications - Matan Dudaie
Tel Aviv University, Department of Biomedical Engineering, Faculty of Engineering, Tel Aviv, Israel
3 shared publications - Ehud Gazit
Tel Aviv University
2 shared publications - Mattan Levi
In Vitro Fertilization Unit, Department of Obstetrics and Gynecology, Meir Medical Center, Kfar Saba 4428163, Israel
2 shared publications Natan T. Shaked
Department of Biomedical Engineering, Faculty of Engineering, Tel Aviv University, Tel Aviv 6997801, Israel
2 shared publications
Latest Publications
- Open Access
- 18 July 2024
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 24 (15) , 6256-6266
Understanding the Solid-State Structure of Riboflavin through a Multitechnique Approach
Crystalline riboflavin (vitamin B2) performs an important biological role as an optically functional material in the tapetum lucidum of certain animals, notably lemurs and cats. The tapetum lucidum is a reflecting layer behind the retina, which serves to enhance photon capture and vision in low-light settings. Motivated by the aim of rationalizing its biological role, and given that the structure of biogenic solid-state riboflavin remains unknown, we have used a range of experimental and computational techniques to determine the solid-state structure of synthetic riboflavin. Our multitechnique approach included microcrystal XRD, powder XRD, three-dimensional electron diffraction (3D-ED), high-resolution solid-state 13C NMR spectroscopy, and dispersion-augmented density functional theory (DFT-D) calculations. Although an independent report of the crystal structure of riboflavin was published recently, our structural investigations reported herein provide a different interpretation of the intermolecular hydrogen-bonding arrangement in this material, supported by all the experimental and computational approaches utilized in our study. We also discuss, more generally, potential pitfalls that may arise in applying DFT-D geometry optimization as a bridging step between structure solution and Rietveld refinement in the structure determination of hydrogen-bonded materials from powder XRD data. Finally, we report experimental and computational values for the refractive index of riboflavin, with implications for its optical function.
- 18 July 2024
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 24 (15) , 6256-6266
Open AccessUnderstanding the Solid-State Structure of Riboflavin through a Multitechnique Approach
Crystalline riboflavin (vitamin B2) performs an important biological role as an optically functional material in the tapetum lucidum of certain animals, notably lemurs and cats. The tapetum lucidum is a reflecting layer behind the retina, which serves to enhance photon capture and vision in low-light settings. Motivated by the aim of rationalizing its biological role, and given that the structure of biogenic solid-state riboflavin remains unknown, we have used a range of experimental and computational techniques to determine the solid-state structure of synthetic riboflavin. Our multitechnique approach included microcrystal XRD, powder XRD, three-dimensional electron diffraction (3D-ED), high-resolution solid-state 13C NMR spectroscopy, and dispersion-augmented density functional theory (DFT-D) calculations. Although an independent report of the crystal structure of riboflavin was published recently, our structural investigations reported herein provide a different interpretation of the intermolecular hydrogen-bonding arrangement in this material, supported by all the experimental and computational approaches utilized in our study. We also discuss, more generally, potential pitfalls that may arise in applying DFT-D geometry optimization as a bridging step between structure solution and Rietveld refinement in the structure determination of hydrogen-bonded materials from powder XRD data. Finally, we report experimental and computational values for the refractive index of riboflavin, with implications for its optical function.
- Open Access
- 6 March 2024
- Published by MDPI AG in Bioengineering
- Vol. 11 (3) , 256
Analyzing Blood Cells of High-Risk Myelodysplastic Syndrome Patients Using Interferometric Phase Microscopy and Fluorescent Flow Cytometry
Myelodysplastic syndromes (MDSs) are a group of potentially deadly diseases that affect the morphology and function of neutrophils. Rapid diagnosis of MDS is crucial for the initiation of treatment that can vastly improve disease outcome. In this work, we present a new approach for detecting morphological differences between neutrophils isolated from blood samples of high-risk MDS patients and blood bank donors (BBDs). Using fluorescent flow cytometry, neutrophils were stained with 2′,7′-dichlorofluorescin diacetate (DCF), which reacts with reactive oxygen species (ROS), and Hoechst, which binds to DNA. We observed that BBDs possessed two cell clusters (designated H and L), whereas MDS patients possessed a single cluster (L). Later, we used FACS to sort the H and the L cells and used interferometric phase microscopy (IPM) to image the cells without utilizing cell staining. IPM images showed that H cells are characterized by low optical path delay (OPD) in the nucleus relative to the cytoplasm, especially in cell vesicles containing ROS, whereas L cells are characterized by low OPD in the cytoplasm relative to the nucleus and no ROS-containing vesicles. Moreover, L cells present a higher average OPD and dry mass compared to H cells. When examining neutrophils from MDS patients and BBDs by IPM during flow, we identified ~20% of cells as H cells in BBDs in contrast to ~4% in MDS patients. These results indicate that IPM can be utilized for the diagnosis of complex hematological pathologies such as MDS.
- 6 March 2024
- Published by MDPI AG in Bioengineering
- Vol. 11 (3) , 256
Open AccessAnalyzing Blood Cells of High-Risk Myelodysplastic Syndrome Patients Using Interferometric Phase Microscopy and Fluorescent Flow Cytometry
Myelodysplastic syndromes (MDSs) are a group of potentially deadly diseases that affect the morphology and function of neutrophils. Rapid diagnosis of MDS is crucial for the initiation of treatment that can vastly improve disease outcome. In this work, we present a new approach for detecting morphological differences between neutrophils isolated from blood samples of high-risk MDS patients and blood bank donors (BBDs). Using fluorescent flow cytometry, neutrophils were stained with 2′,7′-dichlorofluorescin diacetate (DCF), which reacts with reactive oxygen species (ROS), and Hoechst, which binds to DNA. We observed that BBDs possessed two cell clusters (designated H and L), whereas MDS patients possessed a single cluster (L). Later, we used FACS to sort the H and the L cells and used interferometric phase microscopy (IPM) to image the cells without utilizing cell staining. IPM images showed that H cells are characterized by low optical path delay (OPD) in the nucleus relative to the cytoplasm, especially in cell vesicles containing ROS, whereas L cells are characterized by low OPD in the cytoplasm relative to the nucleus and no ROS-containing vesicles. Moreover, L cells present a higher average OPD and dry mass compared to H cells. When examining neutrophils from MDS patients and BBDs by IPM during flow, we identified ~20% of cells as H cells in BBDs in contrast to ~4% in MDS patients. These results indicate that IPM can be utilized for the diagnosis of complex hematological pathologies such as MDS.
- Top Cited PapersOpen Access
- 8 January 2024
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 18 (3) , 2421-2433
High Quantum Yield Amino Acid Carbon Quantum Dots with Unparalleled Refractive Index
Carbon quantum dots (CQDs) are one of the most promising types of fluorescent nanomaterials due to their exceptional water solubility, excellent optical properties, biocompatibility, chemical inertness, excellent refractive index, and photostability. Nitrogen-containing CQDs, which include amino acid based CQDs, are especially attractive due to their high quantum yield, thermal stability, and potential biomedical applications. Recent studies have attempted to improve the preparation of amino acid based CQDs. However, the highest quantum yield obtained for these dots was only 44%. Furthermore, the refractive indices of amino acid derived CQDs were not determined. Here, we systematically explored the performance of CQDs prepared from all 20 coded amino acids using modified hydrothermal techniques allowing more passivation layers on the surface of the dots to optimize their performance. Intriguingly, we obtained the highest refractive indices ever reported for any CQDs. The values differed among the amino acids, with the highest refractive indices found for positively charged amino acids including arginine-CQDs (∼2.1), histidine-CQDs (∼2.0), and lysine-CQDs (∼1.8). Furthermore, the arginine-CQDs reported here showed a nearly 2-fold increase in the quantum yield (∼86%) and a longer decay time (∼8.0 ns) compared to previous reports. In addition, we also demonstrated that all amino acid based CQD materials displayed excitation-dependent emission profiles (from UV to visible) and were photostable, water-soluble, noncytotoxic, and excellent for high contrast live cell imaging or bioimaging. These results indicate that amino acid based CQD materials are high-refractive-index materials applicable for optoelectronic devices, bioimaging, biosensing, and studying cellular organelles in vivo. This extraordinary RI may be highly useful for exploring cellular elements with different densities.
- 8 January 2024
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 18 (3) , 2421-2433
Top Cited PapersOpen AccessHigh Quantum Yield Amino Acid Carbon Quantum Dots with Unparalleled Refractive Index
Carbon quantum dots (CQDs) are one of the most promising types of fluorescent nanomaterials due to their exceptional water solubility, excellent optical properties, biocompatibility, chemical inertness, excellent refractive index, and photostability. Nitrogen-containing CQDs, which include amino acid based CQDs, are especially attractive due to their high quantum yield, thermal stability, and potential biomedical applications. Recent studies have attempted to improve the preparation of amino acid based CQDs. However, the highest quantum yield obtained for these dots was only 44%. Furthermore, the refractive indices of amino acid derived CQDs were not determined. Here, we systematically explored the performance of CQDs prepared from all 20 coded amino acids using modified hydrothermal techniques allowing more passivation layers on the surface of the dots to optimize their performance. Intriguingly, we obtained the highest refractive indices ever reported for any CQDs. The values differed among the amino acids, with the highest refractive indices found for positively charged amino acids including arginine-CQDs (∼2.1), histidine-CQDs (∼2.0), and lysine-CQDs (∼1.8). Furthermore, the arginine-CQDs reported here showed a nearly 2-fold increase in the quantum yield (∼86%) and a longer decay time (∼8.0 ns) compared to previous reports. In addition, we also demonstrated that all amino acid based CQD materials displayed excitation-dependent emission profiles (from UV to visible) and were photostable, water-soluble, noncytotoxic, and excellent for high contrast live cell imaging or bioimaging. These results indicate that amino acid based CQD materials are high-refractive-index materials applicable for optoelectronic devices, bioimaging, biosensing, and studying cellular organelles in vivo. This extraordinary RI may be highly useful for exploring cellular elements with different densities.
- 3 October 2022
- Published by SPIE-Intl Soc Optical Eng
- Vol. 12226, 122260W-33
Sperm-cell DNA fragmentation prediction using label-free quantitative phase imaging and deep learning (Conference Presentation)
Intracytoplasmic sperm injection (ICSI) is the most common practice for in vitro fertilization (IVF) treatments. In ICSI, a single sperm is selected and injected into an oocyte. The quality of the sperm and specifically its DNA fragmentation index (DFI) have significant effects on the fertilization success rate. In our research, we use computer vision and deep learning methods to predict DFI scoring for a single sperm cell. Each cell in the dataset was acquired using multiple white light microscopy techniques combined with state-of-the-art interferometry. In our results, we see a strong correlation between the stained images and our score prediction which can be used in the ICSI process.
- 3 October 2022
- Published by SPIE-Intl Soc Optical Eng
- Vol. 12226, 122260W-33
Sperm-cell DNA fragmentation prediction using label-free quantitative phase imaging and deep learning (Conference Presentation)
Intracytoplasmic sperm injection (ICSI) is the most common practice for in vitro fertilization (IVF) treatments. In ICSI, a single sperm is selected and injected into an oocyte. The quality of the sperm and specifically its DNA fragmentation index (DFI) have significant effects on the fertilization success rate. In our research, we use computer vision and deep learning methods to predict DFI scoring for a single sperm cell. Each cell in the dataset was acquired using multiple white light microscopy techniques combined with state-of-the-art interferometry. In our results, we see a strong correlation between the stained images and our score prediction which can be used in the ICSI process.
- Open Access
- 8 April 2022
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 9 (4) , 1295-1303
Dynamic Tomographic Phase Microscopy by Double Six-Pack Holography
Three-dimensional (3D) optical imaging of rapidly moving biological cells is difficult to achieve as such samples cannot be scanned over time. Here, we present a dynamic scan-free optical tomography approach for stain-free 3D imaging of biological cells using our new double six-pack tomography technique, whereby 12 off-axis holograms are captured in a single camera exposure without sacrificing resolution or field of view. The proposed system illuminates the sample from 12 angles simultaneously, and 3D refractive index (RI) tomograms are reconstructed from each recorded video frame of the dynamic sample. The technique is verified experimentally by recording flowing silica beads, 3 μm in diameter, with the resulting tomogram RI accuracy being 98.5%. A live swimming sperm cell is also imaged, and dynamic 3D imaging results for both beads and sperm cell are presented. The proposed technique represents a 12-fold increase in dynamic holographic data for tomography.
- 8 April 2022
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 9 (4) , 1295-1303
Open AccessDynamic Tomographic Phase Microscopy by Double Six-Pack Holography
Three-dimensional (3D) optical imaging of rapidly moving biological cells is difficult to achieve as such samples cannot be scanned over time. Here, we present a dynamic scan-free optical tomography approach for stain-free 3D imaging of biological cells using our new double six-pack tomography technique, whereby 12 off-axis holograms are captured in a single camera exposure without sacrificing resolution or field of view. The proposed system illuminates the sample from 12 angles simultaneously, and 3D refractive index (RI) tomograms are reconstructed from each recorded video frame of the dynamic sample. The technique is verified experimentally by recording flowing silica beads, 3 μm in diameter, with the resulting tomogram RI accuracy being 98.5%. A live swimming sperm cell is also imaged, and dynamic 3D imaging results for both beads and sperm cell are presented. The proposed technique represents a 12-fold increase in dynamic holographic data for tomography.
- 5 March 2021
- Published by SPIE-Intl Soc Optical Eng
- p. 34
Quantitative phase imaging by a shearing interferometric module with constant off-axis angle (SICA) module
SPIE Digital Library Proceedings
- 5 March 2021
- Published by SPIE-Intl Soc Optical Eng
- p. 34
Quantitative phase imaging by a shearing interferometric module with constant off-axis angle (SICA) module
SPIE Digital Library Proceedings
- Open Access
- 13 February 2020
- Published by Optica Publishing Group in Optics Express
- Vol. 28 (4) , 5617-5628
Quantitative phase imaging by wide-field interferometry with variable shearing distance uncoupled from the off-axis angle
We introduce a new shearing interferometry module for digital holographic microscopy, in which the off-axis angle, which defines the interference fringe frequency, is not coupled to the shearing distance, as is the case in most shearing interferometers. Thus, it enables the selection of shearing distance based on the spatial density of the sample, without losing spatial frequency content due to overlapping of the complex wave fronts in the spatial frequency domain. Our module is based on a 4f imaging unit and a diffraction grating, in which the hologram is generated from two mutually coherent, partially overlapping sample beams, with adjustable shearing distance, as defined by the position of the grating, but with a constant off-axis angle, as defined by the grating period. The module is simple, easy to align, and presents a nearly common-path geometry. By placing this module as an add-on unit at the exit port of an inverted microscope, quantitative phase imaging can easily be performed. The system is characterized by a 2.5 nm temporal stability and a 3.4 nm spatial stability, without using anti-vibration techniques. We provide quantitative phase imaging experiments of silica beads with different shearing distances, red blood cell fluctuations, and cancer cells flowing in a micro-channel, which demonstrate the capability and versatility of our approach in different imaging scenarios.
- 13 February 2020
- Published by Optica Publishing Group in Optics Express
- Vol. 28 (4) , 5617-5628
Open AccessQuantitative phase imaging by wide-field interferometry with variable shearing distance uncoupled from the off-axis angle
We introduce a new shearing interferometry module for digital holographic microscopy, in which the off-axis angle, which defines the interference fringe frequency, is not coupled to the shearing distance, as is the case in most shearing interferometers. Thus, it enables the selection of shearing distance based on the spatial density of the sample, without losing spatial frequency content due to overlapping of the complex wave fronts in the spatial frequency domain. Our module is based on a 4f imaging unit and a diffraction grating, in which the hologram is generated from two mutually coherent, partially overlapping sample beams, with adjustable shearing distance, as defined by the position of the grating, but with a constant off-axis angle, as defined by the grating period. The module is simple, easy to align, and presents a nearly common-path geometry. By placing this module as an add-on unit at the exit port of an inverted microscope, quantitative phase imaging can easily be performed. The system is characterized by a 2.5 nm temporal stability and a 3.4 nm spatial stability, without using anti-vibration techniques. We provide quantitative phase imaging experiments of silica beads with different shearing distances, red blood cell fluctuations, and cancer cells flowing in a micro-channel, which demonstrate the capability and versatility of our approach in different imaging scenarios.
- 18 July 2018
- Published by Wiley in Journal of Biophotonics
- Vol. 11 (11) , e201800137
Stain‐free interferometric phase microscopy correlation with DNA fragmentation stain in human spermatozoa
Acridine orange (AO) staining is used to diagnose DNA fragmentation status in sperm cells. Interferometric phase microscopy (IPM) is an optical imaging method based on digital holographic microscopy that provides quantitative morphological and refractive index imaging of cells in vitro without the need for staining. We have imaged sperm cells using stain‐free IPM in order to estimate different cellular parameters, such as acrosome dry mass and size, in addition to an embryologist evaluation according to the World Health Organization (WHO)‐2010 criteria. Following this, the same sperm cells were stained by AO, imaged using a fluorescence confocal microscope and assessed by the AO‐emitted color, forming five DNA fragmentation groups. These DNA fragmentation groups were correlated with the embryologist‐based classification and the IPM‐based morphological parameters. Our results indicate on significant differences in the IPM‐based parameters between groups with different fragmentation levels. Based on the validation with AO, we conclude that stain‐free IPM images analyzed digitally may assist in selecting sperm cells with intact DNA prior to intracytoplasmic sperm injection. This information may potentially increase percentage of successful pregnancies.
- 18 July 2018
- Published by Wiley in Journal of Biophotonics
- Vol. 11 (11) , e201800137
Stain‐free interferometric phase microscopy correlation with DNA fragmentation stain in human spermatozoa
Acridine orange (AO) staining is used to diagnose DNA fragmentation status in sperm cells. Interferometric phase microscopy (IPM) is an optical imaging method based on digital holographic microscopy that provides quantitative morphological and refractive index imaging of cells in vitro without the need for staining. We have imaged sperm cells using stain‐free IPM in order to estimate different cellular parameters, such as acrosome dry mass and size, in addition to an embryologist evaluation according to the World Health Organization (WHO)‐2010 criteria. Following this, the same sperm cells were stained by AO, imaged using a fluorescence confocal microscope and assessed by the AO‐emitted color, forming five DNA fragmentation groups. These DNA fragmentation groups were correlated with the embryologist‐based classification and the IPM‐based morphological parameters. Our results indicate on significant differences in the IPM‐based parameters between groups with different fragmentation levels. Based on the validation with AO, we conclude that stain‐free IPM images analyzed digitally may assist in selecting sperm cells with intact DNA prior to intracytoplasmic sperm injection. This information may potentially increase percentage of successful pregnancies.