Donghee Kim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Donghee Kim has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Gyuweon Jung
Inter-University Semiconductor Research Center, Department of Electrical and Computer Engineering, Seoul National University, Seoul, Republic of Korea
5 shared publications - Jong-Ho Lee
Department of Electrical and Computer Engineering and Inter‐university Semiconductor Research Center Seoul National University Seoul Republic of Korea
5 shared publications - Hunhee Shin
Inter-University Semiconductor Research Center, Seoul National University
3 shared publications Jinwoo Park
Inter-University Semiconductor Research Center, Seoul National University
3 shared publicationsKangwook Choi
Inter-University Semiconductor Research Center, Seoul National University
3 shared publications- Wonjun Shin
Department of Semiconductor Convergence Engineering Sungkyunkwan University Suwon Republic of Korea
3 shared publications
Latest Publications
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 26 (20) , 30663-30670
Low-Frequency Noise Analysis in Sensor-Circuit Integrated Computing System for Selective Gas Detection
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 26 (20) , 30663-30670
Low-Frequency Noise Analysis in Sensor-Circuit Integrated Computing System for Selective Gas Detection
- 17 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 26 (11) , 17045-17054
Analysis of Accuracy, Area, Latency, and Energy Consumption of Gas-Sensing-Based In-Sensor Neuromorphic Computing
The increasing demand for in-sensor neuromorphic computing motivates a system-level framework that jointly evaluates accuracy, area, latency, and energy. We prototype a platform that integrates a fabricated FET-based gas sensor with an embedded micro-heater, a floating-gated pMOS synapse array, and processing circuits, such as pulse-width modulator (PWM) and integrate-and-fire (I&F) neurons. Using transient responses to H2S and NO2 across temperature and concentration sweeps, we benchmark networks with 3–6 input sensors, three hidden layers (16–128 neurons), and two regression outputs. Accuracy improves with more sensors and larger hidden layers, saturating beyond 64 neurons. Quantization and circuit constraints add bounded error. Area is insensitive to sensor count but scales with hidden neurons, with the high-voltage switch dominating area. Latency is sensor-limited. Energy consumption is overwhelmingly set by the micro-heater (~99.97% of total), making overall consumption highly sensitive to sensor count while relatively insensitive to network size. These results identify trade-offs among accuracy, area, latency, and energy, pinpointing heater efficiency, minimal sensor selection, and high-voltage-switch optimization as the primary design-technology co-optimization (DTCO) keys for designing compact, fast, and energy-aware in-sensor neuromorphic platforms.
- 17 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 26 (11) , 17045-17054
Analysis of Accuracy, Area, Latency, and Energy Consumption of Gas-Sensing-Based In-Sensor Neuromorphic Computing
The increasing demand for in-sensor neuromorphic computing motivates a system-level framework that jointly evaluates accuracy, area, latency, and energy. We prototype a platform that integrates a fabricated FET-based gas sensor with an embedded micro-heater, a floating-gated pMOS synapse array, and processing circuits, such as pulse-width modulator (PWM) and integrate-and-fire (I&F) neurons. Using transient responses to H2S and NO2 across temperature and concentration sweeps, we benchmark networks with 3–6 input sensors, three hidden layers (16–128 neurons), and two regression outputs. Accuracy improves with more sensors and larger hidden layers, saturating beyond 64 neurons. Quantization and circuit constraints add bounded error. Area is insensitive to sensor count but scales with hidden neurons, with the high-voltage switch dominating area. Latency is sensor-limited. Energy consumption is overwhelmingly set by the micro-heater (~99.97% of total), making overall consumption highly sensitive to sensor count while relatively insensitive to network size. These results identify trade-offs among accuracy, area, latency, and energy, pinpointing heater efficiency, minimal sensor selection, and high-voltage-switch optimization as the primary design-technology co-optimization (DTCO) keys for designing compact, fast, and energy-aware in-sensor neuromorphic platforms.
- 5 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45 (3) , 464-467
CMOS-Compatible Barometric Pressure Field-Effect Transistor-Type Sensor
In this work, we propose a metal-oxide-semiconductor field-effect transistor-based barometric pressure sensor having a p -type buried channel, air gap, and air capacitor. The proposed sensor demonstrates a linear 8-fold response when decreasing atmospheric pressure from 740 Torr to 250 Torr, offering the advantages of compact size and low power consumption. The low-frequency noise characteristics and temperature dependency of the sensor are investigated to further demonstrate the sensor performance.
- 5 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45 (3) , 464-467
CMOS-Compatible Barometric Pressure Field-Effect Transistor-Type Sensor
In this work, we propose a metal-oxide-semiconductor field-effect transistor-based barometric pressure sensor having a p -type buried channel, air gap, and air capacitor. The proposed sensor demonstrates a linear 8-fold response when decreasing atmospheric pressure from 740 Torr to 250 Torr, offering the advantages of compact size and low power consumption. The low-frequency noise characteristics and temperature dependency of the sensor are investigated to further demonstrate the sensor performance.
- 8 March 2022
- Published by Elsevier in Sensors and Actuators B: Chemical
- Vol. 360, 131673
Analysis of Cr/Au contact reliability in embedded poly-Si micro-heater for FET-type gas sensor
- 8 March 2022
- Published by Elsevier in Sensors and Actuators B: Chemical
- Vol. 360, 131673
Analysis of Cr/Au contact reliability in embedded poly-Si micro-heater for FET-type gas sensor
- 24 February 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 22 (7) , 6311-6320
Effects of Electrode Structure on H2S Sensing and Low-Frequency Noise Characteristics in In2O3-Based Resistor-Type Gas Sensors
Most studies on gas sensors are focusing on improving the response of the sensor. However, noise characteristics should also be considered for the design of gas sensors with optimal performance. This paper investigates the effects of electrode structure on H 2 S gas sensing and low-frequency noise (LFN) characteristics in In 2 O 3 resistor-type gas sensors. We mainly analyze the response and noise performances of the interdigitated electrode (IDE) sensors with different combinations of spacing between the fingers ( ${S}_{\mathrm{f}}$ ) and the number of electrode fingers ( ${N}_{\mathrm{f}}$ ). Parallel electrode (PE) sensors are also compared as a reference. For the IDE sensors, the response increases as the ${S}_{\mathrm{f}}$ decreases (or N f increases), while the PE sensors show constant response regardless of the ${S}_{\mathrm{f}}$ . The gas response characteristics of the IDE and PE sensors are further analyzed using the gas sensing results of a transmission line method (TLM) pattern. It is shown that the contributions of bulk and contact to the overall gas response differ depending on electrode spacing. The normalized LFN of the IDE sensors is at least 100 times smaller than that of the PE sensors since ${S}_{\mathrm{f}}$ greatly affects the noise characteristics. The limit of detection (LOD) of the sensor for H 2 S gas can be improved from 8380 ppb ( ${S}_{\mathrm{f}}= 100\,\,\mu \text{m}$ , ${N}_{\mathrm{f}} = 2$ ) to 6.42 ppb ( ${S}_{\mathrm{f}}= 2\,\,\mu \text{m}$ , ${N}_{\mathrm{f}} = 30$ ) by adopting a shortly spaced interdigitated electrode structure. The results provide an electrode design guidance for the resistor-type gas sensors that show optimal performance considering both the noise and gas response.
- 24 February 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 22 (7) , 6311-6320
Effects of Electrode Structure on H2S Sensing and Low-Frequency Noise Characteristics in In2O3-Based Resistor-Type Gas Sensors
Most studies on gas sensors are focusing on improving the response of the sensor. However, noise characteristics should also be considered for the design of gas sensors with optimal performance. This paper investigates the effects of electrode structure on H 2 S gas sensing and low-frequency noise (LFN) characteristics in In 2 O 3 resistor-type gas sensors. We mainly analyze the response and noise performances of the interdigitated electrode (IDE) sensors with different combinations of spacing between the fingers ( ${S}_{\mathrm{f}}$ ) and the number of electrode fingers ( ${N}_{\mathrm{f}}$ ). Parallel electrode (PE) sensors are also compared as a reference. For the IDE sensors, the response increases as the ${S}_{\mathrm{f}}$ decreases (or N f increases), while the PE sensors show constant response regardless of the ${S}_{\mathrm{f}}$ . The gas response characteristics of the IDE and PE sensors are further analyzed using the gas sensing results of a transmission line method (TLM) pattern. It is shown that the contributions of bulk and contact to the overall gas response differ depending on electrode spacing. The normalized LFN of the IDE sensors is at least 100 times smaller than that of the PE sensors since ${S}_{\mathrm{f}}$ greatly affects the noise characteristics. The limit of detection (LOD) of the sensor for H 2 S gas can be improved from 8380 ppb ( ${S}_{\mathrm{f}}= 100\,\,\mu \text{m}$ , ${N}_{\mathrm{f}} = 2$ ) to 6.42 ppb ( ${S}_{\mathrm{f}}= 2\,\,\mu \text{m}$ , ${N}_{\mathrm{f}} = 30$ ) by adopting a shortly spaced interdigitated electrode structure. The results provide an electrode design guidance for the resistor-type gas sensors that show optimal performance considering both the noise and gas response.