IAItziar Alzuguren

Itziar Alzuguren

*This is an algorithmically generated author record based on publicly available information.

Itziar Alzuguren has a total of 7 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Performance Evaluation of the FCI-DAB as a Single-Stage and Storage Capacitorless PFC Wireless Charger

    by Itziar Alzuguren, Asier Garcia-Bediaga, Ander Avila, Alejandro Rujas, Miroslav Vasić

    This paper compares two single-stage (1-S) topologies for Electric Vehicle (EV) wireless battery chargers. The Single Stage Resonant-Dual Active Bridge (SSR-DAB) topology is a very compact topology due to the lack of input and output interfaces, reducing considerably the passive components of the circuit. However, its main disadvantage compared to two-stage (2-S) solutions is the fact that it transmits the low frequency fluctuation to the output, which is solved with the recently presented Floating Capacitor Integrated-Dual Active Bridge (FCI-DAB) topology, thanks to the active filter connected in series on the primary-side of the converter. The topologies are compared in terms of controllability, bifurcation, grid current quality and system power losses, taking into account two different control strategies: duty-cycle control on the primary-side and duty-cycle control on the secondary-side of the circuit. The study concludes that the FCI-DAB works better dealing with bifurcation and grid current distortion, while the SSR-DAB converter is not able to guarantee full performance with a single control strategy. The study is validated by experimental results obtained from a scaled down GaN-based Inductive Power Transfer (IPT) 1.5 kW battery charger, achieving 93 % of efficiency and PF=0.99.


  • Open Access

    Floating Capacitor Integrated DAB for Single-Phase, Single-Stage PFC in Wireless Battery Charging Application

    by Itziar Alzuguren, Asier Garcia-Bediaga, Ander Avila, Alejandro Rujas, Miroslav Vasić

    In this paper, a novel active power decoupling topology called Floating Capacitor Integrated Dual Active Bridge (FCI-DAB) for single-phase, single-stage AC-DC solutions is introduced. The main point of the circuit is an active energy buffer that compensates the power fluctuation at double the grid frequency. The power decoupling filter is composed by a floating capacitor and a full-bridge; and is connected to the high-frequency link of a resonant DAB $|$ AC $|$ -DC converter. Compared to state-of-the-art two-stage solutions, it dispenses with the bulky electrolytic storage capacitor, with high ESR and low reliability, whose function is to create a constant DC bus. Unlike typical single-stage converters, filtering the fluctuating instantaneous power in the primary-side of the converter brings advantages such as reducing the RMS current in the secondary-side of the circuit, which results on a 50 $\,\%$ of savings in the secondary-side resistive conduction losses. This is considered a key point, specially in Electric Vehicle (EV) wireless battery charging applications, facilitating the refrigeration of secondary-side circuit that is located on-board the vehicle. The paper presents the novel FCI-DAB circuit and proposes a control strategy based on duty-cycle modulation which enables the realization of the PFC in the grid-side and the compensation of the power fluctuation with the active buffer in the primary-side. The FCI-DAB concept is verified by experimental results, obtained from an GaN-based IPT 1.5 kW battery charger, with 93 % of efficiency and PF=0.99.


  • Single-Phase Single-Stage PFC Based on a Novel Floating Capacitor Filter for Electric Vehicle On-Board Charger Application

    by Itziar Alzuguren, Asier Garcia-Bediaga, Ander Avila, Alejandro Rujas, Miroslav Vasic

    In this paper, a novel modified single-stage Dual-Active-Bridge (DAB) AC-DC converter with an active filter for Electric Vehicle (EV) On-Board Charger (OBC) application is presented. The novel topology dispenses with the DC bus thanks to an active filter connected in series with the primary side of the transformer that eliminates the natural 100 Hz power fluctuation of single-phase Power Factor Correctors (PFC-s). In this way, only the mean power is transferred to the secondary side, thus being possible to remove the storage capacitor that creates the DC bus, which is usually a bulky component with low reliability. Besides, a PFC control is described in detail, which is based on a duty-cycle regulation, integrating different functionalities, i.e., PFC, current shaping and power control on a single control strategy. Finally, these theoretical results are validated using a Gallium Nitride (GaN)-based experimental prototype.


  • Active Filter Circuit in the HF AC-link of a Bidirectional Wireless Battery Charger for EV

    by Asier Garcia-Bediaga, Ander Avila, Itziar Alzuguren, Alejandro Rujas, Miroslav Vasic

    This paper proposes a novel active filter in the primary-side high-frequency (HF) AC-link of an induction power transfer (IPT) system, suitable for compact bidirectional wireless battery chargers for electric vehicles. The proposed circuit has the advantages of single-stage topologies, such as being able to avoid main heavy passive elements like DC-link capacitor and grid side inductor. This results on an increase of the power density and it allows a low-profile power converter design. However, this novel circuit also solves the main disadvantates of single-stage conversion systems in IPT converters, high conduction losses in the coil or the correction of the power factor in the off-board system. A prototype with Gallium Nitride (GaN) High Electron Mobility Transistors (HEMT) has been developed to validate the circuit concept and to analyze the performance of the system.

  • Open Access

    Power Factor Corrector Control Strategies of a Bidirectional Wireless Battery Charger With an Unfolding Active Rectifier

    by Asier Garcia-Bediaga, Ander Avila, Itziar Alzuguren, Alex Sanchez, Alejandro Rujas

    In this paper two Power Factor Corrector (PFC) control strategies for a bidirectional Inductive Power Transfer (IPT) system are proposed. These control strategies are presented for a novel power circuit without input and output interfaces for a wireless electric vehicle battery charger application. This compact topology is comprised of: unfolding rectifier, primary resonant bridge and secondary-side active rectification. Two PFC controls are described in detail: a primary-side PFC control, performed in the primary resonant bridge; and a secondary-side PFC control, implemented in the secondary-side active rectification stage. Both strategies are based on a duty-cycle control operating close to the resonance frequency, integrating different functionalities, i.e. PFC, current shaping and power control on a single control strategy. We analyze each control strategy, evaluating them for different operating points of the charging process. The performance of the wireless charger applying both control strategies is evaluated in terms of power losses, power factor, harmonic distortion and bifurcation. Additionally, the theoretical results are validated using a GaN-based experimental prototype. The presented analysis and experimental results clearly identify the advantages and limitations of each control strategy leaving no doubt about their usefulness for the future IPT systems.


  • A Modular Multifunction Power Converter Based on a Multiwinding Flyback Transformer for EV Application

    by Ander Avila, Asier Garcia-Bediaga, Itziar Alzuguren, Miroslav Vasic, Alejandro Rujas

    In this paper, a revolutionary and novel single-stage, multi-port power conversion block is proposed. The power conversion concept is based on a Bidirectional Flyback converter with four-quadrant switches that permit us to seamlessly control the direction of the energy flow and to select which ports are active. This approach, denominated as Multi-cell Multi-port Bidirectional Flyback (M2BF), can be used as a modular and a multi-function building block interfacing AC and DC sources and loads in complex conversion systems like the one we can encounter in Electric Vehicle (EV) applications. The multi-port property is obtained thanks to the multi-winding flyback transformer that interfaces different sources and loads in a simple and effective way. We present and analyze this concept in detail, focusing on different operation modes it can provide (multi-port DC-DC conversion, AC-DC conversion, Vehicle-to-grid and Grid-to-vehicle etc.) and their possible implementation in the energy distribution network of an EV, where this unique multi-function multi-port converter could bring an important breakthrough. The operating principles of the M2BF for different operating modes are described and analyzed, placing emphasis on the modularity of the proposed concept. The overall concept is evaluated and quantified using a GaN-based prototype achieving efficiencies higher than 91%, that additionally, validates the proposed idea experimentally. The presented analysis and experimental results clearly identify the advantages and limitations of the presented concept leaving no doubt about its usefulness to the future EV distribution network.