Hongrui Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Hongrui Yang has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Jing Fan
School of Environment, Key Laboratory of Yellow River and Huai River Water Environment and Pollution Control, Ministry of Education, Henan Key Laboratory for Environmental Pollution Control, Henan Normal University, Xinxiang 453007, China
3 shared publications - Chen Wang
School of Environment, Key Laboratory of Yellow River and Huai River Water Environment and Pollution Control, Ministry of Education, Henan Key Laboratory for Environmental Pollution Control, Henan Normal University, Xinxiang 453007, China
2 shared publications - Wenjuan Zhu
School of Environment, Key Laboratory of Yellow River and Huai River Water Environment and Pollution Control, Ministry of Education, Henan Key Laboratory for Environmental Pollution Control, Henan Normal University, Xinxiang 453007, China
2 shared publications - Ayiguli Maimaiti
Xinjiang Key Laboratory of New Energy Materials and Green Chemical Engineering, College of Chemical and Environmental Engineering, Xinjiang Institute of Engineering, Urumqi 830023, China
1 shared publication - Fei Li
School of Environment, Key Laboratory of Yellow River and Huai River Water Environment and Pollution Control, Ministry of Education, Henan Key Laboratory for Environmental Pollution Control, Henan Normal University, Xinxiang 453007, China
1 shared publication - Pingning Jin
School of Environment, Key Laboratory of Yellow River and Huai River Water Environment and Pollution Control, Ministry of Education, Henan Key Laboratory for Environmental Pollution Control, Henan Normal University, Xinxiang 453007, China
1 shared publication
Latest Publications
- Open Access
A Novel Recyclable Strategy for Extraction of Naproxen Sodium from Environmental Water by Amino-Functionalized Immobilized Ionic Liquid Polymers
Naproxen sodium is an emerging pollutant that may pose potential hazards to human health and the ecological environment. However, developing highly effective adsorbents for the extraction of naproxen sodium from aqueous environments is still a challenge. Herein, we have prepared a novel amino-functional ionic liquid polymer adsorbent (NH2-IL-PS) for the extraction of naproxen sodium (NPS) from aqueous environments. It was found that the NH2-IL-PS exhibits a high adsorption capacity of 456.6 mg/g for NPS and maintains high extraction efficiency over a wide pH range of 4 to 9 at room temperature. Notably, even when the concentration of NPS was lower than 5 ppb, the extraction efficiency still exceeded 90.0%, with the enrichment factor reaching up to 600.0. More importantly, the NH2-IL-PS adsorbent material can withstand at least 16 consecutive adsorption cycles while maintaining an extraction efficiency of over 90.0%. Finally, the NH2-IL-PS was successfully applied to extract and determine NPS in seven types of real water samples, with relative recoveries ranging from 90.9 to 96.2%. The study of the adsorption mechanism reveals that electrostatic interactions, ion exchange, π-π stacking, and hydrogen bonding are crucial in the extraction of NPS. This study provides a sustainable strategy for the efficient extraction of NPS.
Open AccessA Novel Recyclable Strategy for Extraction of Naproxen Sodium from Environmental Water by Amino-Functionalized Immobilized Ionic Liquid Polymers
Naproxen sodium is an emerging pollutant that may pose potential hazards to human health and the ecological environment. However, developing highly effective adsorbents for the extraction of naproxen sodium from aqueous environments is still a challenge. Herein, we have prepared a novel amino-functional ionic liquid polymer adsorbent (NH2-IL-PS) for the extraction of naproxen sodium (NPS) from aqueous environments. It was found that the NH2-IL-PS exhibits a high adsorption capacity of 456.6 mg/g for NPS and maintains high extraction efficiency over a wide pH range of 4 to 9 at room temperature. Notably, even when the concentration of NPS was lower than 5 ppb, the extraction efficiency still exceeded 90.0%, with the enrichment factor reaching up to 600.0. More importantly, the NH2-IL-PS adsorbent material can withstand at least 16 consecutive adsorption cycles while maintaining an extraction efficiency of over 90.0%. Finally, the NH2-IL-PS was successfully applied to extract and determine NPS in seven types of real water samples, with relative recoveries ranging from 90.9 to 96.2%. The study of the adsorption mechanism reveals that electrostatic interactions, ion exchange, π-π stacking, and hydrogen bonding are crucial in the extraction of NPS. This study provides a sustainable strategy for the efficient extraction of NPS.
- Open Access
A Carboxyl Group-Functionalized Ionic Liquid Hybrid Adsorbent for Solid-Phase Extraction and Determination of Trace Diclofenac Sodium in Milk Samples
A simple and efficient sample pretreatment technology is very important for the accurate determination of trace drug residues in foods to ensure food safety. Herein, we report a new carboxyl group-functionalized ionic liquid hybrid solid- phase adsorbent (PS-IL-COOH) for the highly efficient extraction and quantitative determination of diclofenac sodium (DS) residue in milk samples. It was found that the adsorption efficiency of PS-IL-COOH for the ppb level of DS was greater than 93.0%, the adsorption capacity was 934.1 mg/g, and the enrichment factor was 620.0, which surpass most of the previously reported values for DS adsorbents. The high concentration of salts did not interfere with the adsorption of DS. Importantly, the recovery of DS was above 90% after 16 adsorption–-regeneration cycles. The synergistic effect of the multiple interactions was found to be the main factor for the high efficiency of DS adsorption. The proposed method was applied to the extraction and detection of DS in milk samples, with the relative recovery ranging from 88.2 to 103.0%.
Open AccessA Carboxyl Group-Functionalized Ionic Liquid Hybrid Adsorbent for Solid-Phase Extraction and Determination of Trace Diclofenac Sodium in Milk Samples
A simple and efficient sample pretreatment technology is very important for the accurate determination of trace drug residues in foods to ensure food safety. Herein, we report a new carboxyl group-functionalized ionic liquid hybrid solid- phase adsorbent (PS-IL-COOH) for the highly efficient extraction and quantitative determination of diclofenac sodium (DS) residue in milk samples. It was found that the adsorption efficiency of PS-IL-COOH for the ppb level of DS was greater than 93.0%, the adsorption capacity was 934.1 mg/g, and the enrichment factor was 620.0, which surpass most of the previously reported values for DS adsorbents. The high concentration of salts did not interfere with the adsorption of DS. Importantly, the recovery of DS was above 90% after 16 adsorption–-regeneration cycles. The synergistic effect of the multiple interactions was found to be the main factor for the high efficiency of DS adsorption. The proposed method was applied to the extraction and detection of DS in milk samples, with the relative recovery ranging from 88.2 to 103.0%.
- Open Access
- 10 April 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (8) , 1287
A Sustainable Strategy for Solid-Phase Extraction of Antiviral Drug from Environmental Waters by Immobilized Hydrogen Bond Acceptor
Deep eutectic solvents are a new generation of green solvents composed of hydrogen bond acceptors and donors. However, when used as extractants in liquid–liquid separation, they are difficult to recycle and easy to lose. In order to solve these problems, herein, immobilized hydrogen bond acceptor adsorbent material was prepared for the separation and enrichment of antiviral drug arbidol from seven kinds of environmental water samples by in situ formation of hydrophobic deep eutectic solvents. The structure, morphology and thermal stability of the adsorbents were characterized, the separation and enrichment conditions for the targeted analyte were optimized, and the adsorption thermodynamics and kinetics were investigated. It was found that the adsorbent material could effectively enrich trace arbidol with the recovery more than 95% at the concentration above 7.5 ng/mL, and the enrichment factor was as high as 634.7. Coexisting substances, such as NaCl, KCl, CaCl2 and MgCl2, did not interfere with the adsorption of arbidol, even if their concentration was high, up to 1.0 mol/L, and the relative recovery for real samples was in the range from 92.5% to 100.3%. Furthermore, the immobilized hydrogen bond acceptor could be recycled and reused, and the recovery of arbidol was still above 95% after 12 adsorption–desorption cycles. The mechanism study demonstrates that the synergistic effect of hydrogen bonding and π-π stacking is the primary factor for the high adsorption efficiency.
- 10 April 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (8) , 1287
Open AccessA Sustainable Strategy for Solid-Phase Extraction of Antiviral Drug from Environmental Waters by Immobilized Hydrogen Bond Acceptor
Deep eutectic solvents are a new generation of green solvents composed of hydrogen bond acceptors and donors. However, when used as extractants in liquid–liquid separation, they are difficult to recycle and easy to lose. In order to solve these problems, herein, immobilized hydrogen bond acceptor adsorbent material was prepared for the separation and enrichment of antiviral drug arbidol from seven kinds of environmental water samples by in situ formation of hydrophobic deep eutectic solvents. The structure, morphology and thermal stability of the adsorbents were characterized, the separation and enrichment conditions for the targeted analyte were optimized, and the adsorption thermodynamics and kinetics were investigated. It was found that the adsorbent material could effectively enrich trace arbidol with the recovery more than 95% at the concentration above 7.5 ng/mL, and the enrichment factor was as high as 634.7. Coexisting substances, such as NaCl, KCl, CaCl2 and MgCl2, did not interfere with the adsorption of arbidol, even if their concentration was high, up to 1.0 mol/L, and the relative recovery for real samples was in the range from 92.5% to 100.3%. Furthermore, the immobilized hydrogen bond acceptor could be recycled and reused, and the recovery of arbidol was still above 95% after 12 adsorption–desorption cycles. The mechanism study demonstrates that the synergistic effect of hydrogen bonding and π-π stacking is the primary factor for the high adsorption efficiency.