Yongshun Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yongshun Wang has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Lijun Zhang
School of Electronic and Information Engineering, Lanzhou Jiaotong University, Lanzhou 730070, China
6 shared publications - Yao Hu
School of Electronic and Information Engineering, Lanzhou Jiaotong University, Lanzhou 730070, China
6 shared publications - Kaiwen Du
School of Electronic Science and Engineering, University of Electronic Science and Technology of China, Chengdu, China
4 shared publications CaiZhen Zhang
Lanzhou Jiaotong University
2 shared publicationsZiTing Wang
Lanzhou Jiaotong University
2 shared publications- Chenshuai Bai
School of Electronic and Information Engineering, Lanzhou Jiaotong University, Lanzhou, Gansu Province, P. R. China
1 shared publication
Latest Publications
- Open Access
- 26 November 2025
- Published by MDPI AG in Micromachines
- Vol. 16 (12) , 1331
Design and Implementation of Miniature Multi-Mode 4 × 4 MIMO Antenna for WiFi 7 Applications
The compact and wideband patch antennas applied to WiFi 7 multiple-input multiple-output (MIMO) antenna systems are presented. The MIMO antenna structure consists of four multi-branch radiating patches fed by coupled microstrip lines, which occupies a size of . By exploiting multiple resonant modes, an impedance bandwidth of 37% (5.07–7.37 GHz) achieves a reflection coefficient of less than −10 dB and fully encompasses both WiFi 7 high-frequency ranges. To alleviate mutual coupling, two decoupling structures, named complementary split-ring resonators (CSRRs), are employed between the MIMO elements to interact with the undesirable surface current; furthermore, the proposed orthogonal placement of four elements further minimizes radiation coupling. Consequently, the proposed array achieves measured isolations greater than 14.5 dB and 11 dB at 5 GHz and 6 GHz bands, respectively. The prototype of the proposed MIMO antenna has been manufactured. It has also been measured and the results show similarity with the simulations. The measured radiation pattern and the diversity performance, including the envelope correlation coefficient (ECC), diversity gain (DG), and multiplexing efficiency, are calculated, and they verify the outstanding diversity characteristics of the proposed MIMO antenna. This makes it a promising solution for emerging WiFi 7 wideband applications.- 26 November 2025
- Published by MDPI AG in Micromachines
- Vol. 16 (12) , 1331
Open AccessDesign and Implementation of Miniature Multi-Mode 4 × 4 MIMO Antenna for WiFi 7 Applications
The compact and wideband patch antennas applied to WiFi 7 multiple-input multiple-output (MIMO) antenna systems are presented. The MIMO antenna structure consists of four multi-branch radiating patches fed by coupled microstrip lines, which occupies a size of . By exploiting multiple resonant modes, an impedance bandwidth of 37% (5.07–7.37 GHz) achieves a reflection coefficient of less than −10 dB and fully encompasses both WiFi 7 high-frequency ranges. To alleviate mutual coupling, two decoupling structures, named complementary split-ring resonators (CSRRs), are employed between the MIMO elements to interact with the undesirable surface current; furthermore, the proposed orthogonal placement of four elements further minimizes radiation coupling. Consequently, the proposed array achieves measured isolations greater than 14.5 dB and 11 dB at 5 GHz and 6 GHz bands, respectively. The prototype of the proposed MIMO antenna has been manufactured. It has also been measured and the results show similarity with the simulations. The measured radiation pattern and the diversity performance, including the envelope correlation coefficient (ECC), diversity gain (DG), and multiplexing efficiency, are calculated, and they verify the outstanding diversity characteristics of the proposed MIMO antenna. This makes it a promising solution for emerging WiFi 7 wideband applications. - Open Access
Forensics System for Internet of Vehicles Based on Post-Quantum Blockchain
Internet of Vehicles (IoV) serves as the data support for intelligent transportation systems, and the information security of the IoV is of paramount importance. In view of the problems of centralized processing, easy information leakage, and weak anti-interference ability in traditional vehicle networking systems, this paper proposes a blockchain architecture suitable for IoV forensics scenario. By leveraging the decentralized, distributed storage and tamper-proof capabilities of blockchain, it solves the privacy protection and data security issues of the system. Considering the threat of quantum computing to the encryption technology in traditional blockchain, this paper integrates lattice cryptography and ring signatures into digital signature technology, achieving privacy protection and traceability of the signer’s identity. To enhance the efficiency of lattice-based cryptographic algorithms, the DualRing technology is introduced, which reduces the computational time and storage consumption of ring signatures. Theoretical analysis has proved the correctness, anonymity, unlinkability, and traceability of the proposed scheme, which is applicable to the IoV forensics system. Simulation comparisons demonstrated that the proposed scheme significantly improves computational efficiency and reduces storage overhead. When the number of ring members is 256, the signature and verification times require only 65.76 ms and 21.46 ms, respectively.
Open AccessForensics System for Internet of Vehicles Based on Post-Quantum Blockchain
Internet of Vehicles (IoV) serves as the data support for intelligent transportation systems, and the information security of the IoV is of paramount importance. In view of the problems of centralized processing, easy information leakage, and weak anti-interference ability in traditional vehicle networking systems, this paper proposes a blockchain architecture suitable for IoV forensics scenario. By leveraging the decentralized, distributed storage and tamper-proof capabilities of blockchain, it solves the privacy protection and data security issues of the system. Considering the threat of quantum computing to the encryption technology in traditional blockchain, this paper integrates lattice cryptography and ring signatures into digital signature technology, achieving privacy protection and traceability of the signer’s identity. To enhance the efficiency of lattice-based cryptographic algorithms, the DualRing technology is introduced, which reduces the computational time and storage consumption of ring signatures. Theoretical analysis has proved the correctness, anonymity, unlinkability, and traceability of the proposed scheme, which is applicable to the IoV forensics system. Simulation comparisons demonstrated that the proposed scheme significantly improves computational efficiency and reduces storage overhead. When the number of ring members is 256, the signature and verification times require only 65.76 ms and 21.46 ms, respectively.
- Open Access
- 13 August 2024
- Published by MDPI AG in Micromachines
- Vol. 15 (8) , 1029
Ultrathin Small Outline Package Key Techniques for High-Speed Chips with Multi-Leads
The key technologies for the ultrathin small outline package (TSOP) of large-sized high-speed chips have been designed and developed in this paper. The designing techniques, such as a 25 µm precise positioning dice attaching technique, a lead frame unit structure without a base island, and a lead co-plane layout inside the frame, were developed. The TSO package outline with a large number of leads, a frame unit arrangement, and a frame distribution with a base island and without one were improved. The technological problems, including the reduction in thickness, wafer cutting, chip sticking bonding, and plastic sealing, were successfully solved. The designed large-sized package products have many advantages, such as high availability, low cost, high reliability, and a short production cycle. This package technique can be widely used in various intellectual application regions.
- 13 August 2024
- Published by MDPI AG in Micromachines
- Vol. 15 (8) , 1029
Open AccessUltrathin Small Outline Package Key Techniques for High-Speed Chips with Multi-Leads
The key technologies for the ultrathin small outline package (TSOP) of large-sized high-speed chips have been designed and developed in this paper. The designing techniques, such as a 25 µm precise positioning dice attaching technique, a lead frame unit structure without a base island, and a lead co-plane layout inside the frame, were developed. The TSO package outline with a large number of leads, a frame unit arrangement, and a frame distribution with a base island and without one were improved. The technological problems, including the reduction in thickness, wafer cutting, chip sticking bonding, and plastic sealing, were successfully solved. The designed large-sized package products have many advantages, such as high availability, low cost, high reliability, and a short production cycle. This package technique can be widely used in various intellectual application regions.
- Open Access
- 29 June 2024
- Published by MDPI AG in Micromachines
- Vol. 15 (7) , 850
Design of Miniaturized and Wideband Four-Port MIMO Antenna Pair for WiFi
A miniaturized and wideband four-port multiple-input multiple-output (MIMO) antenna pair for Wi-Fi mobile terminals application is proposed. The proposed antenna pair consists of four multi-branch antenna elements arranged orthogonally, with an overall size of 40 × 40 × 3.5 mm3 and each antenna element size of 15.2 × 3.5 mm × 0.8 mm3. The performance of the proposed antenna shows the advantages of a wide frequency band, low mutual coupling, high efficiency, and a compact structure. The wideband characteristics of the antenna elements are achieved through multi-mode resonance. The suppression of coupling is accomplished by strategically positioning the four compact antenna elements to ensure their maximum radiation directions are orthogonal, thus eliminating the need for an additional decoupling structure. In this paper, the proposed antenna is optimized in terms of the parameters then simulated and measured. The simulated results illustrate that an impedance bandwidth of the antenna is about 15% (5.06~5.88 GHz) with S11 < −10 dB, excellent port isolation exceeds 20 dB between all ports, a high radiation efficiency ranges from 51.2% to 89.9%, the maximum gain is 4.5 dBi, and the ECCs are less than 0.04. The measured results show that the −10 dB impedance bandwidth of the antenna is about 13% (5.13~5.80 GHz), the isolation between the antenna elements is better than 21 dB, the radiation efficiency ranges from 51.8% to 92.3%, the maximum gain is 5.3 dBi, and the ECCs are less than 0.05. The proposed four-port MIMO antenna works on the 5G LTE band 46 and Wi-Fi 6E operating bands. As a mobile terminal antenna, the proposed design scheme demonstrates excellent performance and applicability, fulfilling the requirements for 5G mobile terminal applications.
- 29 June 2024
- Published by MDPI AG in Micromachines
- Vol. 15 (7) , 850
Open AccessDesign of Miniaturized and Wideband Four-Port MIMO Antenna Pair for WiFi
A miniaturized and wideband four-port multiple-input multiple-output (MIMO) antenna pair for Wi-Fi mobile terminals application is proposed. The proposed antenna pair consists of four multi-branch antenna elements arranged orthogonally, with an overall size of 40 × 40 × 3.5 mm3 and each antenna element size of 15.2 × 3.5 mm × 0.8 mm3. The performance of the proposed antenna shows the advantages of a wide frequency band, low mutual coupling, high efficiency, and a compact structure. The wideband characteristics of the antenna elements are achieved through multi-mode resonance. The suppression of coupling is accomplished by strategically positioning the four compact antenna elements to ensure their maximum radiation directions are orthogonal, thus eliminating the need for an additional decoupling structure. In this paper, the proposed antenna is optimized in terms of the parameters then simulated and measured. The simulated results illustrate that an impedance bandwidth of the antenna is about 15% (5.06~5.88 GHz) with S11 < −10 dB, excellent port isolation exceeds 20 dB between all ports, a high radiation efficiency ranges from 51.2% to 89.9%, the maximum gain is 4.5 dBi, and the ECCs are less than 0.04. The measured results show that the −10 dB impedance bandwidth of the antenna is about 13% (5.13~5.80 GHz), the isolation between the antenna elements is better than 21 dB, the radiation efficiency ranges from 51.8% to 92.3%, the maximum gain is 5.3 dBi, and the ECCs are less than 0.05. The proposed four-port MIMO antenna works on the 5G LTE band 46 and Wi-Fi 6E operating bands. As a mobile terminal antenna, the proposed design scheme demonstrates excellent performance and applicability, fulfilling the requirements for 5G mobile terminal applications.
- Open Access
- 23 November 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (23) , 12613
Air-Stable Near-Infrared Sensitive Organic Phototransistors Realized via Tri-Layer Planar Heterojunction
Near-infrared (NIR) light has many applications in agriculture, transportation, medicine, the military, and other fields. Lead phthalocyanine (PbPc) exhibits excellent near-infrared (NIR) light absorption characteristics and is widely used in NIR-sensitive organic photodetectors. In this work, PbPc-based NIR organic phototransistors (OPTs) with different active layer structures were designed and fabricated. The photo-absorption characteristics of organic films, photosensitive properties, and air stability of the devices were investigated. The results suggested that (i) the bilayer planar heterojunction (PHJ) devices exhibit far better photosensitive performance than the single layer ones due to higher mobility of the formers than the latters; (ii) the bilayer PHJ ones with p-type channel have equivalent photosensitive performance to those with n-type channel owing to equivalent mobility, higher NIR absorption and lower exciton dissociation efficiency of the formers than the latters; (iii) the bilayer PHJ ones with p-type channel possess superior air stability to those with n-type channel thanks to better air stability of pentacene channel layer than C60 channel layer; (iv) the tri-layer PHJ ones perform better than the bilayer PHJ ones with p-type channel and exhibit a high photoresponsivity of 1415 mA/W and a maximum photo-to-dark current ratio of 1.2 × 104, and such an outstanding performance benefits from the virtues of tri-layer PHJ structure including high light absorption, carrier mobility and exciton dissociation efficiency; and (v) the air stability of the tri-layer PHJ ones is better than that of the bilayer PHJ ones with p-type channel, which can be attributed to the passivation of the top-level C60 layer.
- 23 November 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (23) , 12613
Open AccessAir-Stable Near-Infrared Sensitive Organic Phototransistors Realized via Tri-Layer Planar Heterojunction
Near-infrared (NIR) light has many applications in agriculture, transportation, medicine, the military, and other fields. Lead phthalocyanine (PbPc) exhibits excellent near-infrared (NIR) light absorption characteristics and is widely used in NIR-sensitive organic photodetectors. In this work, PbPc-based NIR organic phototransistors (OPTs) with different active layer structures were designed and fabricated. The photo-absorption characteristics of organic films, photosensitive properties, and air stability of the devices were investigated. The results suggested that (i) the bilayer planar heterojunction (PHJ) devices exhibit far better photosensitive performance than the single layer ones due to higher mobility of the formers than the latters; (ii) the bilayer PHJ ones with p-type channel have equivalent photosensitive performance to those with n-type channel owing to equivalent mobility, higher NIR absorption and lower exciton dissociation efficiency of the formers than the latters; (iii) the bilayer PHJ ones with p-type channel possess superior air stability to those with n-type channel thanks to better air stability of pentacene channel layer than C60 channel layer; (iv) the tri-layer PHJ ones perform better than the bilayer PHJ ones with p-type channel and exhibit a high photoresponsivity of 1415 mA/W and a maximum photo-to-dark current ratio of 1.2 × 104, and such an outstanding performance benefits from the virtues of tri-layer PHJ structure including high light absorption, carrier mobility and exciton dissociation efficiency; and (v) the air stability of the tri-layer PHJ ones is better than that of the bilayer PHJ ones with p-type channel, which can be attributed to the passivation of the top-level C60 layer.
- Open Access
- 18 August 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (16) , 9370
Design of Wideband Decoupling Antenna Array for 5G Smartphones at N77/N78/N79/WLAN 5 GHz Bands
We propose a broadband decoupled antenna pair for 5G mobile terminals. The broadband decoupled design of this antenna pair is based on the characteristic mode theory (CMA) and defective ground structure. First, CMA is applied to obtain the characteristic current distribution of the antenna, then the characteristic current sensitive regions are optimized to make the antenna introduce new modes and obtain a wide bandwidth. After that, an antenna pair is added with defective ground structure to obtain a wideband decoupled antenna pair that has small size and high isolation. Next, an eight-element MIMO antenna system is constructed with the obtained broadband decoupled antenna pair, and a composite decoupling technique consisting of defective ground structure (DGS) and decoupling strip is applied to the two antenna pairs on the same side of the bezel to improve the isolation. The simulation and prototype test results show that the eight-element MIMO antenna with −10 dB bandwidth of 3.28~5.85 GHz mainly covers the N77/N78/N79/WLAN 5 GHz band, and the antenna pair are only 1.6 mm apart with good isolation (−16.7 dB), the ECC is less than 0.01, and it has a good total efficiency at the main operating frequency. Finally, the effect of a user’s hand on the antenna is briefly analyzed to verify the robustness of the proposed MIMO antenna system.
- 18 August 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (16) , 9370
Open AccessDesign of Wideband Decoupling Antenna Array for 5G Smartphones at N77/N78/N79/WLAN 5 GHz Bands
We propose a broadband decoupled antenna pair for 5G mobile terminals. The broadband decoupled design of this antenna pair is based on the characteristic mode theory (CMA) and defective ground structure. First, CMA is applied to obtain the characteristic current distribution of the antenna, then the characteristic current sensitive regions are optimized to make the antenna introduce new modes and obtain a wide bandwidth. After that, an antenna pair is added with defective ground structure to obtain a wideband decoupled antenna pair that has small size and high isolation. Next, an eight-element MIMO antenna system is constructed with the obtained broadband decoupled antenna pair, and a composite decoupling technique consisting of defective ground structure (DGS) and decoupling strip is applied to the two antenna pairs on the same side of the bezel to improve the isolation. The simulation and prototype test results show that the eight-element MIMO antenna with −10 dB bandwidth of 3.28~5.85 GHz mainly covers the N77/N78/N79/WLAN 5 GHz band, and the antenna pair are only 1.6 mm apart with good isolation (−16.7 dB), the ECC is less than 0.01, and it has a good total efficiency at the main operating frequency. Finally, the effect of a user’s hand on the antenna is briefly analyzed to verify the robustness of the proposed MIMO antenna system.
- Open Access
- 27 December 2022
- Published by MDPI AG in Applied Sciences
- Vol. 13 (1) , 331
A Design for a Wide-Band Antenna Pair Applied for Mobile Terminals at the Sub-6 GHz Band
To meet the requirements of a high transmission rate and strong communication quality for mobile terminals, a planar antenna printed on a 0.8-mm-thick FR-4 substrate is proposed in this paper. The structures are compact, with a size of The performance of a single antenna pair in a ground plane shows the advantages of both ultra-wide bandwidth and high isolation. The operating frequency of −6 dB is 54% (3.3 GHz–5.9 GHz). To solve the mutual coupling effects exiting in the antenna pair, a hybrid strip defected grounding structure (DGS) is added in the middle of neighboring antenna elements, and good isolation performance of lower than −13 dB is achieved. The evolution and analysis of the proposed antenna pair are given to investigate the operating principle. To verify its practicality, an eight-port antenna system in ground plane is constructed along two frames of the smartphone board. The MIMO antenna system performance is simulated and texted. The results show a bandwidth of 3.4–5.2 GHz (−6 dB), an isolation performance lower than −10 dB, an ECC lower than 0.01, and a total efficiency of 46–84%. In addition, the performance of the antenna system under single handheld conditions is also discussed. The correlation results show that the designed antenna pair has good data transmission and interference resistance capability, which proves that this is an excellent antenna model for application in mobile terminals.- 27 December 2022
- Published by MDPI AG in Applied Sciences
- Vol. 13 (1) , 331
Open AccessA Design for a Wide-Band Antenna Pair Applied for Mobile Terminals at the Sub-6 GHz Band
To meet the requirements of a high transmission rate and strong communication quality for mobile terminals, a planar antenna printed on a 0.8-mm-thick FR-4 substrate is proposed in this paper. The structures are compact, with a size of The performance of a single antenna pair in a ground plane shows the advantages of both ultra-wide bandwidth and high isolation. The operating frequency of −6 dB is 54% (3.3 GHz–5.9 GHz). To solve the mutual coupling effects exiting in the antenna pair, a hybrid strip defected grounding structure (DGS) is added in the middle of neighboring antenna elements, and good isolation performance of lower than −13 dB is achieved. The evolution and analysis of the proposed antenna pair are given to investigate the operating principle. To verify its practicality, an eight-port antenna system in ground plane is constructed along two frames of the smartphone board. The MIMO antenna system performance is simulated and texted. The results show a bandwidth of 3.4–5.2 GHz (−6 dB), an isolation performance lower than −10 dB, an ECC lower than 0.01, and a total efficiency of 46–84%. In addition, the performance of the antenna system under single handheld conditions is also discussed. The correlation results show that the designed antenna pair has good data transmission and interference resistance capability, which proves that this is an excellent antenna model for application in mobile terminals. - Open Access
- 12 November 2022
- Published by MDPI AG in Micromachines
- Vol. 13 (11) , 1964
Design of Wideband Decoupling Antenna Pairs for 5G Portable Devices at N77/N78/N79 Bands
We proposed an antenna pair that is applicable for mobile terminals: a type of coupling feed planar antenna that has a size of , a wide band, coupling suppression and compact size. Different from the conventional antenna design, the process of band expansion comes from a dual-band antenna pair and is based on characteristic modes theory (CMA). By observing characteristic current distributions, the optimization emphasis is placed on current sensitive parts in antenna structures, which is an effective method to create or modify resonant points for exciting band potential. Meanwhile, the multiple defective ground structure (DGS) is introduced for isolation enhancement. The −10 dB bandwidth of 3.23–5.24 GHz can be realized, and the isolation of two antenna pairs with only 2 mm spacing is lower (−17.34 dB). The eight-port MIMO system constructed by four proposed antenna pairs has been fabricated. The simulated and measured results of MIMO indicate that its −10 dB operating bandwidth can work at N77/N78/N79/WLAN 5 GHz bands. Moreover, a lower ECC of less than 0.04 and a high efficiency of more than 60% can be obtained, which confirms that it is capable of excellent data transmission as a terminal MIMO antenna system.- 12 November 2022
- Published by MDPI AG in Micromachines
- Vol. 13 (11) , 1964
Open AccessDesign of Wideband Decoupling Antenna Pairs for 5G Portable Devices at N77/N78/N79 Bands
We proposed an antenna pair that is applicable for mobile terminals: a type of coupling feed planar antenna that has a size of , a wide band, coupling suppression and compact size. Different from the conventional antenna design, the process of band expansion comes from a dual-band antenna pair and is based on characteristic modes theory (CMA). By observing characteristic current distributions, the optimization emphasis is placed on current sensitive parts in antenna structures, which is an effective method to create or modify resonant points for exciting band potential. Meanwhile, the multiple defective ground structure (DGS) is introduced for isolation enhancement. The −10 dB bandwidth of 3.23–5.24 GHz can be realized, and the isolation of two antenna pairs with only 2 mm spacing is lower (−17.34 dB). The eight-port MIMO system constructed by four proposed antenna pairs has been fabricated. The simulated and measured results of MIMO indicate that its −10 dB operating bandwidth can work at N77/N78/N79/WLAN 5 GHz bands. Moreover, a lower ECC of less than 0.04 and a high efficiency of more than 60% can be obtained, which confirms that it is capable of excellent data transmission as a terminal MIMO antenna system. - Open Access
- 9 August 2022
- Published by Hindawi Limited in Computational Intelligence and Neuroscience
- Vol. 2022, 1-9
Antiocclusion Visual Tracking Algorithm Combining Fully Convolutional Siamese Network and Correlation Filtering
Machine learning only uses single-channel grayscale features to model the target, and the filter solution process is relatively simple. When the target has a large change relative to the initial frame, the tracking effect is poor. When there is the same kind of target interference in the target search area, the tracking results will be poor. The tracking algorithm based on the fully convolutional Siamese network can solve these problems. By learning the similarity measurement function, the similarity between the template and the target search area is evaluated, and the target area is found according to the similarity. It adopts offline pre-training and does not update online for tracking, which has a faster tracking speed. According to this study, (1) considering the accuracy and speed, the target tracking algorithm based on correlation filtering performs well. A sample adaptive update model is introduced to eliminate unreliable samples, which effectively enhances the reliability of training samples. With simultaneous changes in illumination and scale, fast motion and in-plane rotation IPR can still be maintained. (2) Determined by calculating the Hessian matrix, in the Struck function, Bike3 parameter adjustment can achieve fast tracking, and Boat5 ensures that the system stability is maintained in the presence of interference factors. The position of the highest scoring point in the fine similarity score map of the same size as the search image is obtained by bicubic interpolation as the target position. (3) The parallax discontinuity caused by the object boundary cannot be directly processed as a smooth continuous parallax. The MeanShift vector obtained by calculating the target template feature and the feature to be searched can increase the accuracy by 53.1, reduce the robustness by 31.8, and reduce the error by 28.6 in the SiamVGG algorithm.
- 9 August 2022
- Published by Hindawi Limited in Computational Intelligence and Neuroscience
- Vol. 2022, 1-9
Open AccessAntiocclusion Visual Tracking Algorithm Combining Fully Convolutional Siamese Network and Correlation Filtering
Machine learning only uses single-channel grayscale features to model the target, and the filter solution process is relatively simple. When the target has a large change relative to the initial frame, the tracking effect is poor. When there is the same kind of target interference in the target search area, the tracking results will be poor. The tracking algorithm based on the fully convolutional Siamese network can solve these problems. By learning the similarity measurement function, the similarity between the template and the target search area is evaluated, and the target area is found according to the similarity. It adopts offline pre-training and does not update online for tracking, which has a faster tracking speed. According to this study, (1) considering the accuracy and speed, the target tracking algorithm based on correlation filtering performs well. A sample adaptive update model is introduced to eliminate unreliable samples, which effectively enhances the reliability of training samples. With simultaneous changes in illumination and scale, fast motion and in-plane rotation IPR can still be maintained. (2) Determined by calculating the Hessian matrix, in the Struck function, Bike3 parameter adjustment can achieve fast tracking, and Boat5 ensures that the system stability is maintained in the presence of interference factors. The position of the highest scoring point in the fine similarity score map of the same size as the search image is obtained by bicubic interpolation as the target position. (3) The parallax discontinuity caused by the object boundary cannot be directly processed as a smooth continuous parallax. The MeanShift vector obtained by calculating the target template feature and the feature to be searched can increase the accuracy by 53.1, reduce the robustness by 31.8, and reduce the error by 28.6 in the SiamVGG algorithm.
- Open Access
- 10 April 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (8) , 3816
Design and Analysis on Decoupling Techniques for MIMO Wireless Systems in 5G Applications
Multiple-input multiple-output (MIMO) wireless system is a hot research topic in 5th generation mobile communication technology (5G), which can increase the channel capacity of the antenna system to meet new communication demands without changing the bandwidth and transmission power. However, adding the number of antenna elements in a limited space size can lead to mutual coupling effects and impair the communication quality. Therefore, it is significant to design a compact MIMO wireless system using decoupling techniques. Several studies on the reduction of mutual coupling effects have been proposed. However, a concrete overview of the features and resemblances of these decoupling techniques is lacking. In this review, we provide a brief description of the research background on the mutual coupling effect of MIMO. Then, various decoupling techniques worthy of reference are classified and outlined. We further summarize the additional impacts due to the existence of different decoupling structures, and the possible usability and defects of these techniques are revealed clearly in this paper. Finally, a future outlook on the development direction of decoupling techniques for MIMO wireless systems is also concluded and discussed.
- 10 April 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (8) , 3816
Open AccessDesign and Analysis on Decoupling Techniques for MIMO Wireless Systems in 5G Applications
Multiple-input multiple-output (MIMO) wireless system is a hot research topic in 5th generation mobile communication technology (5G), which can increase the channel capacity of the antenna system to meet new communication demands without changing the bandwidth and transmission power. However, adding the number of antenna elements in a limited space size can lead to mutual coupling effects and impair the communication quality. Therefore, it is significant to design a compact MIMO wireless system using decoupling techniques. Several studies on the reduction of mutual coupling effects have been proposed. However, a concrete overview of the features and resemblances of these decoupling techniques is lacking. In this review, we provide a brief description of the research background on the mutual coupling effect of MIMO. Then, various decoupling techniques worthy of reference are classified and outlined. We further summarize the additional impacts due to the existence of different decoupling structures, and the possible usability and defects of these techniques are revealed clearly in this paper. Finally, a future outlook on the development direction of decoupling techniques for MIMO wireless systems is also concluded and discussed.