Liqun Niu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Liqun Niu has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Qi Zhang
State Key Laboratory for Manufacturing Systems Engineering, School of Mechanical Engineering, Xi’an Jiaotong University, Xi’an 710049, China
4 shared publications Zhenglong Liang
Lanzhou University of Technology
4 shared publicationsXuming Wang
Lanzhou Lanshi Super Alloy New Material Co., Ltd, Lanzhou, Gansu, China
3 shared publicationsBin Han
School of Mechanical Engineering, Xi’an Jiaotong University, Xi’an, China
2 shared publicationsBingzheng Wang
Lanzhou Lanshi Super Alloy New Material Co., Ltd
2 shared publications- Bingguo Zhu
School of Mechanical & Electronical Engineering, Lanzhou University of Technology, Lanzhou 730050, China
1 shared publication
Latest Publications
- 9 October 2026
- Published by SAGE Publications in Ironmaking & Steelmaking: Processes, Products and Applications
Predictive modeling and engineering validation of ladle draining in bottom pouring
In bottom pouring, ladle draining directly affects mold filling stability, solidification behavior, and ingot quality. To describe the draining process under the combined effects of a continuously decreasing liquid level and changes in slide-gate opening, a predictive mathematical model was developed. The model incorporates the geometric characteristics of the ladle and the relationship between slide-gate opening and effective flow area. An equivalent discharge coefficient was introduced to account for engineering factors such as friction loss and vortex flow. Validation using plant data showed that the model can reasonably predict the variation in molten steel weight over time and reflect the stagewise draining characteristics caused by opening adjustment. For the two validation samples obtained under otherwise comparable plant conditions, the average actual pouring time was 660 s, whereas the average predicted pouring time was 748 s, with an average relative deviation of 13.3%. The model provides a quantitative basis for ladle draining analysis, pouring control, and process parameter optimization in bottom pouring.
- 9 October 2026
- Published by SAGE Publications in Ironmaking & Steelmaking: Processes, Products and Applications
Predictive modeling and engineering validation of ladle draining in bottom pouring
In bottom pouring, ladle draining directly affects mold filling stability, solidification behavior, and ingot quality. To describe the draining process under the combined effects of a continuously decreasing liquid level and changes in slide-gate opening, a predictive mathematical model was developed. The model incorporates the geometric characteristics of the ladle and the relationship between slide-gate opening and effective flow area. An equivalent discharge coefficient was introduced to account for engineering factors such as friction loss and vortex flow. Validation using plant data showed that the model can reasonably predict the variation in molten steel weight over time and reflect the stagewise draining characteristics caused by opening adjustment. For the two validation samples obtained under otherwise comparable plant conditions, the average actual pouring time was 660 s, whereas the average predicted pouring time was 748 s, with an average relative deviation of 13.3%. The model provides a quantitative basis for ladle draining analysis, pouring control, and process parameter optimization in bottom pouring.
- Open Access
- 3 February 2026
- Published by Springer Nature in Research Square
An exponential intensity mapping method for grayscale drift suppression in high-temperature forging images
High-temperature forging images often suffer from non-stationary grayscale drift caused by the formation and spallation of oxide scale. This drift degrades the robustness of fixed-threshold Canny edge detection and similarity-based region growing segmentation. To address this issue, an exponential intensity mapping preprocessing method is proposed that suppresses grayscale drift by selectively enhancing the high-intensity forging region while attenuating the low-intensity background, thereby increasing foreground-background separability. The mapping parameters are calibrated on representative production images using a two-point anchoring strategy: stable foreground and background intensity anchors are estimated from quantiles, and the gain and offset are solved analytically under a fixed enhancement strength. Experiments on 79 manually annotated images show that the median region-growing coverage improves from 4.26×10−4 to 0.9438, with the 90th percentile reaching 0.9912. For contour extraction, the band-limited Boundary F1 of Canny increases from 0.7117 to 0.7740. These results demonstrate that the proposed preprocessing effectively compensates for oxide-scale-induced grayscale drift and improves the stability of contour extraction and segmentation without modifying downstream algorithms or adding hardware.
- 3 February 2026
- Published by Springer Nature in Research Square
Open AccessAn exponential intensity mapping method for grayscale drift suppression in high-temperature forging images
High-temperature forging images often suffer from non-stationary grayscale drift caused by the formation and spallation of oxide scale. This drift degrades the robustness of fixed-threshold Canny edge detection and similarity-based region growing segmentation. To address this issue, an exponential intensity mapping preprocessing method is proposed that suppresses grayscale drift by selectively enhancing the high-intensity forging region while attenuating the low-intensity background, thereby increasing foreground-background separability. The mapping parameters are calibrated on representative production images using a two-point anchoring strategy: stable foreground and background intensity anchors are estimated from quantiles, and the gain and offset are solved analytically under a fixed enhancement strength. Experiments on 79 manually annotated images show that the median region-growing coverage improves from 4.26×10−4 to 0.9438, with the 90th percentile reaching 0.9912. For contour extraction, the band-limited Boundary F1 of Canny increases from 0.7117 to 0.7740. These results demonstrate that the proposed preprocessing effectively compensates for oxide-scale-induced grayscale drift and improves the stability of contour extraction and segmentation without modifying downstream algorithms or adding hardware.
- 14 November 2025
- Published by Springer Nature in Journal of Materials Science
- Vol. 60 (47) , 24490-24507
Hot deformation behavior and isothermal die forging characteristics of novel Al–Zn–Mg–Cu–Er–Zr alloy
- 14 November 2025
- Published by Springer Nature in Journal of Materials Science
- Vol. 60 (47) , 24490-24507
Hot deformation behavior and isothermal die forging characteristics of novel Al–Zn–Mg–Cu–Er–Zr alloy
- 9 September 2025
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 35 (5) , 4427-4440
A Grain Growth Model for GH625 Alloy with Wide Temperature Range
- 9 September 2025
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 35 (5) , 4427-4440
A Grain Growth Model for GH625 Alloy with Wide Temperature Range
- Open Access
A Porosity Closure Model Under Hot Isostatic Pressing of an IN718 Alloy Manufactured by Powder Bed Fusion
The low productivity and high cost of additive manufacturing techniques, such as powder bed fusion (PBF), limits its wide application in industry. A combined approach of hot isostatic pressing (HIP) and PBF was an effective means to solve this limitation. Nevertheless, there is currently a lack of a porosity closure model to design and optimize the HIP process parameters of PBF-manufactured components. The porosity closure condition of the PBF-manufactured component is deduced based on the additivity of logarithmic strain and the plastic equation of volume compressible material, and then a porosity closure model considering temperature and pressure is established and verified by molecular dynamics simulation. Subsequently, a HIP diagram of the PBF-manufactured IN718 is constructed. Four different initial relative densities of 0.956, 0.970, 0.984, and 0.996 of IN718 components are introduced by increasing the scanning speed of PBF. HIP post-treatment experiments of different relative density components are performed. The accuracy of the HIP diagram is verified by the relative density test and microstructure observation.
Open AccessA Porosity Closure Model Under Hot Isostatic Pressing of an IN718 Alloy Manufactured by Powder Bed Fusion
The low productivity and high cost of additive manufacturing techniques, such as powder bed fusion (PBF), limits its wide application in industry. A combined approach of hot isostatic pressing (HIP) and PBF was an effective means to solve this limitation. Nevertheless, there is currently a lack of a porosity closure model to design and optimize the HIP process parameters of PBF-manufactured components. The porosity closure condition of the PBF-manufactured component is deduced based on the additivity of logarithmic strain and the plastic equation of volume compressible material, and then a porosity closure model considering temperature and pressure is established and verified by molecular dynamics simulation. Subsequently, a HIP diagram of the PBF-manufactured IN718 is constructed. Four different initial relative densities of 0.956, 0.970, 0.984, and 0.996 of IN718 components are introduced by increasing the scanning speed of PBF. HIP post-treatment experiments of different relative density components are performed. The accuracy of the HIP diagram is verified by the relative density test and microstructure observation.
- 10 November 2022
- Published by Springer Nature in International Journal of Material Forming
- Vol. 16 (1) , 1-12
Simulation and experiment research on integrated casting and forging process of automobile control arm
- 10 November 2022
- Published by Springer Nature in International Journal of Material Forming
- Vol. 16 (1) , 1-12
Simulation and experiment research on integrated casting and forging process of automobile control arm
- Open Access
Modelling Dynamic Recrystallization of A356 Aluminum Alloy during Hot Deformation
The flow stress and dynamic recrystallization behavior of A356 aluminum alloy was studied, with a strain rate ranging from 0.001 s−1 to 1 s−1 and temperature ranging from 300 to 500 °C. Both the true stress–strain curves and microstructure examination of A356 aluminum alloy indicated that dynamic recrystallization occurred during the isothermal compression. A physical dynamic recrystallization model based on the Arrhenius equation was developed, and this model can accurately predict the dynamic recrystallization fraction of A356 aluminum alloy during the isothermal compression. Finally, this model was implemented in FEM software Forge, and the microstructure evolution was simulated well.
Open AccessModelling Dynamic Recrystallization of A356 Aluminum Alloy during Hot Deformation
The flow stress and dynamic recrystallization behavior of A356 aluminum alloy was studied, with a strain rate ranging from 0.001 s−1 to 1 s−1 and temperature ranging from 300 to 500 °C. Both the true stress–strain curves and microstructure examination of A356 aluminum alloy indicated that dynamic recrystallization occurred during the isothermal compression. A physical dynamic recrystallization model based on the Arrhenius equation was developed, and this model can accurately predict the dynamic recrystallization fraction of A356 aluminum alloy during the isothermal compression. Finally, this model was implemented in FEM software Forge, and the microstructure evolution was simulated well.
- Open Access
Hot Deformation Behavior of the 25CrMo4 Steel Using a Modified Arrhenius Model
25CrMo4 steel is widely used in the manufacturing of high-speed train axles due to its excellent mechanical properties. The purpose of this study is to develop an accurate modified constitutive model to describe the hot deformation behavior of the steel. Isothermal compression experiments were performed at different strain rates (0.01, 0.1, 0.5, and 1 s−1) and different temperatures (950, 1000, 1050, and 1100 °C) using a Gleeble-3800 thermal simulator. The microstructure after hot deformation was observed by the electron backscatter diffraction (EBSD), and the effects of temperature and strain rate were analyzed. The results showed that the coupling effect of temperature and strain rate on the dislocation density led to the change in the shape of the true stress–strain curve and that dynamic recovery (DRV) and dynamic recrystallization (DRX) caused the macroscopic softening phenomenon, with DRX being the main mechanism. Based on the true stress–strain curves, the strain-compensated Arrhenius constitutive model was calibrated. To improve prediction ability, a modified Arrhenius constitutive model was proposed, in which the temperature and strain rate coupling correction functions were incorporated. The original, modified Arrhenius models were evaluated according to the absolute relative error (ARE), the average absolute relative error (AARE), and the correlation coefficient (R2). Compared with the original model, the modified Arrhenius model has a higher prediction accuracy, with the ARE value mostly below 4%, the AARE value of 1.91%, and the R2 value of 0.9958.
Open AccessHot Deformation Behavior of the 25CrMo4 Steel Using a Modified Arrhenius Model
25CrMo4 steel is widely used in the manufacturing of high-speed train axles due to its excellent mechanical properties. The purpose of this study is to develop an accurate modified constitutive model to describe the hot deformation behavior of the steel. Isothermal compression experiments were performed at different strain rates (0.01, 0.1, 0.5, and 1 s−1) and different temperatures (950, 1000, 1050, and 1100 °C) using a Gleeble-3800 thermal simulator. The microstructure after hot deformation was observed by the electron backscatter diffraction (EBSD), and the effects of temperature and strain rate were analyzed. The results showed that the coupling effect of temperature and strain rate on the dislocation density led to the change in the shape of the true stress–strain curve and that dynamic recovery (DRV) and dynamic recrystallization (DRX) caused the macroscopic softening phenomenon, with DRX being the main mechanism. Based on the true stress–strain curves, the strain-compensated Arrhenius constitutive model was calibrated. To improve prediction ability, a modified Arrhenius constitutive model was proposed, in which the temperature and strain rate coupling correction functions were incorporated. The original, modified Arrhenius models were evaluated according to the absolute relative error (ARE), the average absolute relative error (AARE), and the correlation coefficient (R2). Compared with the original model, the modified Arrhenius model has a higher prediction accuracy, with the ARE value mostly below 4%, the AARE value of 1.91%, and the R2 value of 0.9958.
- Open Access
- 23 January 2022
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 119 (11-12) , 7075-7088
Material characteristics evaluation for DC04-welded tube hydroforming
- 23 January 2022
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 119 (11-12) , 7075-7088
Open AccessMaterial characteristics evaluation for DC04-welded tube hydroforming