Atiq Ur Rehman
Atiq Ur Rehman has a total of 70 co-authors. Here are the top co-authors by number of shared publications:
- Rizwan Ul Hassan
Department of Chemical and Biological Engineering, Gachon University, Seongnam, Republic of Korea
4 shared publications Mukhtar Ahmad
Department of Physics, COMSATS University Islamabad Lahore Campus, Lahore, Pakistan
3 shared publicationsRasmiah S. Almufarij
Department of Chemistry, College of Sciences Princess Nourah Bint Abdulrahman University Riyadh Saudi Arabia
3 shared publicationsZahra Batool
Department of Physics, RIPHAH International University, Lahore Campus, Lahore, Pakistan
3 shared publicationsDoniyor Jumanazarov
Urgench State University, Urgench, Uzbekistan
2 shared publicationsGhulam Abbas Ashraf
Low Dimensional Materials Research Center, Khazar University, Baku, Azerbaijan
2 shared publications
Latest Publications
- 9 November 2026
- Published by Wiley in International Journal of Quantum Chemistry
- Vol. 126 (22)
Strain Induced Optoelectronic, Thermal, and Photocatalytic Activity of the Double Perovskite Oxide Sr 2 InOsO 6 With Os‐5d Transition Metal Oxides for Spintronic Devices: A GGA and GGA + mBJ First‐Principles Comparative Analysis
The increasing global energy demand and the inherent nature of conventional electronic devices and power conversion systems point to the need for the development of advanced energy materials with a clear focus on sustainability. In this work we examine the structural, electronic, optical, thermal and photocatalytic properties of double perovskite oxide Sr 2 InOsO 6 strongly correlated Os‐5d electrons using the GGA, GGA+mBJ, GGA+U, GGA+U+mBJ correlation method with and without spin orbital coupling (SOC) and applying strain engineering these are implemented within DFT based WIEN2K code. GGA without SOC show metallic or semiconducting behavior underestimate band gap 0.24–0 eV with biaxial strain −1%, 5%. GGA+mBJ show semiconductor behavior band gap 2.31–1.38 eV with biaxial strain 1%, −5%. Exchange interactions in the Os‐5d orbitals, indicating intrinsic magnetic ordering in Sr 2 InOsO 6 . Additionally optical and transport properties including dielectric function, refractive index, absorption coefficient, extinction coefficient, reflectivity, electrical conductivity, Seebeck coefficient, power factor, specific heat capacity, thermal conductivity have been evaluated. Observing the photocatalytic properties CB −5.27 eV which is below the H + /H 2 potential −4.44 eV, Sr 2 InOsO 6 is suitable for OER photocatalyst. These results highlight Sr 2 InOsO 6 as a viable option for advanced optoelectronics, and sustainable OER Z‐scheme photocatalytic systems.
- 9 November 2026
- Published by Wiley in International Journal of Quantum Chemistry
- Vol. 126 (22)
Strain Induced Optoelectronic, Thermal, and Photocatalytic Activity of the Double Perovskite Oxide Sr 2 InOsO 6 With Os‐5d Transition Metal Oxides for Spintronic Devices: A GGA and GGA + mBJ First‐Principles Comparative Analysis
The increasing global energy demand and the inherent nature of conventional electronic devices and power conversion systems point to the need for the development of advanced energy materials with a clear focus on sustainability. In this work we examine the structural, electronic, optical, thermal and photocatalytic properties of double perovskite oxide Sr 2 InOsO 6 strongly correlated Os‐5d electrons using the GGA, GGA+mBJ, GGA+U, GGA+U+mBJ correlation method with and without spin orbital coupling (SOC) and applying strain engineering these are implemented within DFT based WIEN2K code. GGA without SOC show metallic or semiconducting behavior underestimate band gap 0.24–0 eV with biaxial strain −1%, 5%. GGA+mBJ show semiconductor behavior band gap 2.31–1.38 eV with biaxial strain 1%, −5%. Exchange interactions in the Os‐5d orbitals, indicating intrinsic magnetic ordering in Sr 2 InOsO 6 . Additionally optical and transport properties including dielectric function, refractive index, absorption coefficient, extinction coefficient, reflectivity, electrical conductivity, Seebeck coefficient, power factor, specific heat capacity, thermal conductivity have been evaluated. Observing the photocatalytic properties CB −5.27 eV which is below the H + /H 2 potential −4.44 eV, Sr 2 InOsO 6 is suitable for OER photocatalyst. These results highlight Sr 2 InOsO 6 as a viable option for advanced optoelectronics, and sustainable OER Z‐scheme photocatalytic systems.
- 7 April 2026
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 55 (6) , 5285-5298
Hydrothermally Synthesized Calcium Multi-ferrite/Zinc Oxide Composite as High-Power Density Electrode Materials
- 7 April 2026
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 55 (6) , 5285-5298
Hydrothermally Synthesized Calcium Multi-ferrite/Zinc Oxide Composite as High-Power Density Electrode Materials
- 27 November 2025
- Published by Springer Nature in Journal of Electroceramics
- Vol. 54 (2) , 1-17
Structure–performance correlation in NiS-CNT hybrid electrodes for advanced electrochemical energy storage
- 27 November 2025
- Published by Springer Nature in Journal of Electroceramics
- Vol. 54 (2) , 1-17
Structure–performance correlation in NiS-CNT hybrid electrodes for advanced electrochemical energy storage
- 22 November 2025
- Published by Springer Nature in Journal of Molecular Modeling
- Vol. 31 (12) , 342
First-principles study of lutetium-based double hydride perovskites (Cs₂CaLuH₆, Cs₂SrLuH₆, Cs₂BaLuH₆) as promising materials for hydrogen energy fuel cells: a DFT study
Context The double hydride Cs2XLuH6 (X = Ca, Sr, Ba) perovskites are explored to determine the scope of these materials in hydrogen fuel cells and related applications. The DFT-based physical properties like thermoelectric, optoelectronic, vibrational, mechanical, and thermodynamic properties are calculated by applying hybrid complex HSE06 functional. The vibrational and thermodynamic stability of these materials are verified by positive (real) modes of phonons in the dispersion curves. The electronic properties illustrate the metallic behavior of these materials that make these materials favorable for hydrogen storage applications. The mechanical properties illustrate the compatibility, reliability, stability, and easy transportation of these materials for hydrogen storage applications. The peak value of Seebeck coefficient is listed as \(4.82\times {10}^{-5} V/K\) for Cs2CaLuH6. The highest value of gravimetric ratio for hydrogen energy storage is found to be 4.07 wt% for Cs2BaLuH6. The highest calculated tolerance factors is 0.92 for Cs2BaLuH6. All these novel and significant properties confirmed Cs2BaLuH6 double hydride perovskites as the potential candidates for future energy applications like hydrogen fuel cell. Method In the present article, optoelectronic and other physical properties of the materials under consideration are calculated by applying first principles DFT based in the framework of CASTEP simulation code. The electronic properties have been calculated using the HSE06. Graphical Abstract- 22 November 2025
- Published by Springer Nature in Journal of Molecular Modeling
- Vol. 31 (12) , 342
First-principles study of lutetium-based double hydride perovskites (Cs₂CaLuH₆, Cs₂SrLuH₆, Cs₂BaLuH₆) as promising materials for hydrogen energy fuel cells: a DFT study
Context The double hydride Cs2XLuH6 (X = Ca, Sr, Ba) perovskites are explored to determine the scope of these materials in hydrogen fuel cells and related applications. The DFT-based physical properties like thermoelectric, optoelectronic, vibrational, mechanical, and thermodynamic properties are calculated by applying hybrid complex HSE06 functional. The vibrational and thermodynamic stability of these materials are verified by positive (real) modes of phonons in the dispersion curves. The electronic properties illustrate the metallic behavior of these materials that make these materials favorable for hydrogen storage applications. The mechanical properties illustrate the compatibility, reliability, stability, and easy transportation of these materials for hydrogen storage applications. The peak value of Seebeck coefficient is listed as \(4.82\times {10}^{-5} V/K\) for Cs2CaLuH6. The highest value of gravimetric ratio for hydrogen energy storage is found to be 4.07 wt% for Cs2BaLuH6. The highest calculated tolerance factors is 0.92 for Cs2BaLuH6. All these novel and significant properties confirmed Cs2BaLuH6 double hydride perovskites as the potential candidates for future energy applications like hydrogen fuel cell. Method In the present article, optoelectronic and other physical properties of the materials under consideration are calculated by applying first principles DFT based in the framework of CASTEP simulation code. The electronic properties have been calculated using the HSE06. Graphical Abstract- 30 May 2025
- Published by Springer Nature in Journal of Inorganic and Organometallic Polymers and Materials
- Vol. 35 (11) , 9444-9455
The Ab-Initio Investigation of Structural, Electronic, Mechanical, Dynamical and Thermodynamic Properties of Double Halide Cs2SrTaCl6, Cs2SrTaBr6, and Cs2BaTaBr6 Perovskites: A Dispersion Corrected DFT Study
- 30 May 2025
- Published by Springer Nature in Journal of Inorganic and Organometallic Polymers and Materials
- Vol. 35 (11) , 9444-9455
The Ab-Initio Investigation of Structural, Electronic, Mechanical, Dynamical and Thermodynamic Properties of Double Halide Cs2SrTaCl6, Cs2SrTaBr6, and Cs2BaTaBr6 Perovskites: A Dispersion Corrected DFT Study
- 10 May 2025
- Published by Springer Nature in Journal of Inorganic and Organometallic Polymers and Materials
- Vol. 35 (10) , 8613-8626
Synergistic Effect of Conducting Polymer PANI on Electrochemical Performance of Ni Ferrites for Asymmetric Supercapacitors
- 10 May 2025
- Published by Springer Nature in Journal of Inorganic and Organometallic Polymers and Materials
- Vol. 35 (10) , 8613-8626
Synergistic Effect of Conducting Polymer PANI on Electrochemical Performance of Ni Ferrites for Asymmetric Supercapacitors
- Open Access
- 2 July 2024
- Published by MDPI AG in Magnetochemistry
- Vol. 10 (7) , 48
Structural, Morphological and Ferroelectric Properties of Sr-Cd Co-Doped Nickel Ferrite for Energy Storage Devices
Ferroelectric materials, renowned for their capacity to demonstrate spontaneous electric polarization reversible through an external electric field, are essential in numerous technological applications owing to their distinctive characteristics. For this, a series of spinel Sr-Cd co-doped nickel ferrite nanomaterials Cd0.5−xSrxNi0.5Fe2O4 (x = 0.0, 0.1, 0.2 and 0.3) were prepared through the standard sol-gel auto combustion method The XRD patterns showed that the prepared samples have a cubic spinel structure. The crystallite sizes of the samples vary from 29 to 40 nm. The morphology of prepared samples showed uniformly distributed spheres. Magnetic properties showed the soft magnetic nature of the prepared ferrites. The ferroelectric study revealed that Sr-Cd substituted ferrites exhibited the elliptical nature of ferroelectric loops at normal room temperature. The maximum polarization has been achieved at x = 0.3. The understanding of current and voltage (I–V) showed a slowly decreasing tendency of leakage current on both sides symmetrically against the increasing Sr content. The conductivity of the prepared spinel increases as a function of higher Sr doping. The real part of dielectric constant increases with increasing frequency. The materials show large elliptical loops indicating high asymmetric ferroelectric energy storage capability.
- 2 July 2024
- Published by MDPI AG in Magnetochemistry
- Vol. 10 (7) , 48
Open AccessStructural, Morphological and Ferroelectric Properties of Sr-Cd Co-Doped Nickel Ferrite for Energy Storage Devices
Ferroelectric materials, renowned for their capacity to demonstrate spontaneous electric polarization reversible through an external electric field, are essential in numerous technological applications owing to their distinctive characteristics. For this, a series of spinel Sr-Cd co-doped nickel ferrite nanomaterials Cd0.5−xSrxNi0.5Fe2O4 (x = 0.0, 0.1, 0.2 and 0.3) were prepared through the standard sol-gel auto combustion method The XRD patterns showed that the prepared samples have a cubic spinel structure. The crystallite sizes of the samples vary from 29 to 40 nm. The morphology of prepared samples showed uniformly distributed spheres. Magnetic properties showed the soft magnetic nature of the prepared ferrites. The ferroelectric study revealed that Sr-Cd substituted ferrites exhibited the elliptical nature of ferroelectric loops at normal room temperature. The maximum polarization has been achieved at x = 0.3. The understanding of current and voltage (I–V) showed a slowly decreasing tendency of leakage current on both sides symmetrically against the increasing Sr content. The conductivity of the prepared spinel increases as a function of higher Sr doping. The real part of dielectric constant increases with increasing frequency. The materials show large elliptical loops indicating high asymmetric ferroelectric energy storage capability.
- 14 March 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (4) , 045935
Mechanical and thermal response of XFe2O4 (X = Zn, Ag and Co) spinel ferrites via IR-spectroscopy and first-principles calculations
The lack of comprehensive literature on the all-important aspect of the elasticity of spinel ferrites led to the hydrothermal synthesis of different (Co, Zn, Ag) spinel ferrites. IR spectroscopy revealed the characteristic absorption bands of metal-oxygen in all three compositions. The shifting of tetrahedral and octahedral bending vibrations towards higher frequencies owes to changes in inter-atomic and inter-ionic distances. Elastic parameters, wave velocities, and Debye temperature have been calculated using IR spectroscopy data. Elastic parameters have been higher for Co ferrites than Zn and Ag ferrites. The Poisson ratio seems to be consistent for different spinel ferrites. Shear wave velocity has been found to be higher than longitudinal wave velocity because perpendicular particle vibrations take higher energy than parallel vibrations. Wave velocities have been found to be higher in Ag ferrites than in the other two compositions. Debye temperature follows the same trend as elastic parameters. Additionally, we have confirmed the mechanical stability of the Co, Zn, and Ag ferrites using the first-principles calculations in the density functional theory (DFT) approach framework. Interestingly, the Co/Zn/Ag ferrites exhibit semiconducting nature with a band gap of 3.96/3.66/0.71 ev. Our study could pave the way for next-generation spintronic devices.
- 14 March 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (4) , 045935
Mechanical and thermal response of XFe2O4 (X = Zn, Ag and Co) spinel ferrites via IR-spectroscopy and first-principles calculations
The lack of comprehensive literature on the all-important aspect of the elasticity of spinel ferrites led to the hydrothermal synthesis of different (Co, Zn, Ag) spinel ferrites. IR spectroscopy revealed the characteristic absorption bands of metal-oxygen in all three compositions. The shifting of tetrahedral and octahedral bending vibrations towards higher frequencies owes to changes in inter-atomic and inter-ionic distances. Elastic parameters, wave velocities, and Debye temperature have been calculated using IR spectroscopy data. Elastic parameters have been higher for Co ferrites than Zn and Ag ferrites. The Poisson ratio seems to be consistent for different spinel ferrites. Shear wave velocity has been found to be higher than longitudinal wave velocity because perpendicular particle vibrations take higher energy than parallel vibrations. Wave velocities have been found to be higher in Ag ferrites than in the other two compositions. Debye temperature follows the same trend as elastic parameters. Additionally, we have confirmed the mechanical stability of the Co, Zn, and Ag ferrites using the first-principles calculations in the density functional theory (DFT) approach framework. Interestingly, the Co/Zn/Ag ferrites exhibit semiconducting nature with a band gap of 3.96/3.66/0.71 ev. Our study could pave the way for next-generation spintronic devices.
- 25 October 2023
- Published by IOP Publishing in Physica Scripta
- Vol. 98 (11) , 115037
Effect of modified gravity on the Hawking evaporation of charged AdS black holes
We study the impact of rainbow and Einstein bumblebee modified theories of gravity on the Hawking evaporation process of the black holes. After evaluating the basic thermodynamical quantities, we find out impact parameter b = (angular momentum )/(energy of the emitted particles), which control the emission of the particles and the photon orbit of the black hole in modified theories of gravity. We utilize the well-known Stefan-Boltzmann law to obtain the relationship of black hole mass M against its lifetime t. The numerical results of black hole mass versus lifetime t show that initially the mass of black hole in modified gravity decreases rapidly and later evaporation process becomes slower when temperature reduces to zero. The black hole requires huge time to fully evaporate which is consistent result with 3rd law of thermodynamics for black holes. We observe that increasing values of AdS length l increases evaporation time and increasing value of rainbow parameter η results in slowing down the evaporation process. Moreover, we analyze that uncharged black holes evaporate quickly as compared to charged black hole and black hole in higher dimensions required huge time to fully evaporate as compared to black hole in small dimensions.
- 25 October 2023
- Published by IOP Publishing in Physica Scripta
- Vol. 98 (11) , 115037
Effect of modified gravity on the Hawking evaporation of charged AdS black holes
We study the impact of rainbow and Einstein bumblebee modified theories of gravity on the Hawking evaporation process of the black holes. After evaluating the basic thermodynamical quantities, we find out impact parameter b = (angular momentum )/(energy of the emitted particles), which control the emission of the particles and the photon orbit of the black hole in modified theories of gravity. We utilize the well-known Stefan-Boltzmann law to obtain the relationship of black hole mass M against its lifetime t. The numerical results of black hole mass versus lifetime t show that initially the mass of black hole in modified gravity decreases rapidly and later evaporation process becomes slower when temperature reduces to zero. The black hole requires huge time to fully evaporate which is consistent result with 3rd law of thermodynamics for black holes. We observe that increasing values of AdS length l increases evaporation time and increasing value of rainbow parameter η results in slowing down the evaporation process. Moreover, we analyze that uncharged black holes evaporate quickly as compared to charged black hole and black hole in higher dimensions required huge time to fully evaporate as compared to black hole in small dimensions.