Jie-Er Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Jie-Er Zhang has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Jian-Xin Chen
Nantong University
7 shared publications - Wen-Wen Yang
School of Information Science and Technology, Nantong University, Nan Tong, China
7 shared publications - Jun-Yao Yang
School of Information Science and Technology, Nantong University, Nantong, China
2 shared publications - Yichun Shen
Jiangsu Zhongtian Technology Company Ltd., Nantong, China
2 shared publications - Gu Liu
School of Information Science and Technology, Nantong University, Nantong, China
1 shared publication Qin-Fang Zhang
School of Materials Science and Engineering, Yancheng Institute of Technology, Yancheng, China
1 shared publication
Latest Publications
- 27 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (2) , 721-725
A 4 × 4 Substrate-Integrated HOM Dielectric Resonator Antenna Array With Gain Enhancement and Multiple Sidelobe Suppression
In this letter, a 4×4 substrate-integrated dielectric resonator antenna (SIDRA) array operating in the Ku-band is proposed with enhanced gain and suppressed sidelobes, targeting satellite communication applications. The gain improvement is achieved through excitation of higher-order modes (HOMs) of dielectric resonator (DR) and feeding slot, while multiple strategies are employed for sidelobe reduction. In the E-plane, element spacing is meticulously designed based on element's beamwidth to achieve low sidelobes. In the H-plane, which uses a series-fed structure, sidelobe suppression is simultaneously realized via a beamwidth adjustment scheme by controlling the distance between the dual-slot structure along with radiation null enhancement enabled by substrate integration. With these strategies, sidelobes are suppressed from -15.1 dB to -19 dB in the E-plane and from -10.7 dB to -21.9 dB in the H-plane. According to the simulated and measured results, the HOM SIDRA array achieves a bandwidth of 13.5%, with gains ranging from 20.3 to 23 dBi.
- 27 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (2) , 721-725
A 4 × 4 Substrate-Integrated HOM Dielectric Resonator Antenna Array With Gain Enhancement and Multiple Sidelobe Suppression
In this letter, a 4×4 substrate-integrated dielectric resonator antenna (SIDRA) array operating in the Ku-band is proposed with enhanced gain and suppressed sidelobes, targeting satellite communication applications. The gain improvement is achieved through excitation of higher-order modes (HOMs) of dielectric resonator (DR) and feeding slot, while multiple strategies are employed for sidelobe reduction. In the E-plane, element spacing is meticulously designed based on element's beamwidth to achieve low sidelobes. In the H-plane, which uses a series-fed structure, sidelobe suppression is simultaneously realized via a beamwidth adjustment scheme by controlling the distance between the dual-slot structure along with radiation null enhancement enabled by substrate integration. With these strategies, sidelobes are suppressed from -15.1 dB to -19 dB in the E-plane and from -10.7 dB to -21.9 dB in the H-plane. According to the simulated and measured results, the HOM SIDRA array achieves a bandwidth of 13.5%, with gains ranging from 20.3 to 23 dBi.
- 31 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (11) , 9607-9612
Low-Profile Dual-Band Dual-Polarized Coplanar Shared-Aperture Antenna Using Perforated Metasurface for 5G (4.9, 26 GHz) Mobile Terminals
The shared-aperture antenna is considered an attractive high-integration solution to support the cooperative work of sub-6 GHz and millimeter-wave (mmW) frequency bands. Current share-aperture designs, however, face challenges in simultaneously realizing dual polarization, low-profile, and mmW beam-scanning arrays. In this communication, to deal with this issue, a dual-polarized coplanar shared-aperture antenna integrating sub-6 GHz metasurface (MTS) and mmW magneto-electric (ME) dipole for 5G (4.9, 26 GHz) wireless terminals is proposed. By leveraging the sub-wavelength characteristics of MTS unit cells, each cell integrates an embedded ME-dipole element. Meanwhile, the MTS unit cells are perforated for the miniaturization of the sub-6 GHz antenna while accommodating the 4 × 4 mmW ME-dipole array. Therefore, both the sub-6 GHz MTS and the mmW ME-dipole share the same aperture and profile, resulting in a very compact size of 0.46 × 0.46 × 0.028 λL3 (λL is the wavelength in free space at 4.9 GHz). The open-loop resonator (OLR) structure is introduced to the metasurface for decoupling between the MTS cell and the ME-dipole in the mmW band. For validation, an antenna prototype is fabricated and tested.
- 31 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (11) , 9607-9612
Low-Profile Dual-Band Dual-Polarized Coplanar Shared-Aperture Antenna Using Perforated Metasurface for 5G (4.9, 26 GHz) Mobile Terminals
The shared-aperture antenna is considered an attractive high-integration solution to support the cooperative work of sub-6 GHz and millimeter-wave (mmW) frequency bands. Current share-aperture designs, however, face challenges in simultaneously realizing dual polarization, low-profile, and mmW beam-scanning arrays. In this communication, to deal with this issue, a dual-polarized coplanar shared-aperture antenna integrating sub-6 GHz metasurface (MTS) and mmW magneto-electric (ME) dipole for 5G (4.9, 26 GHz) wireless terminals is proposed. By leveraging the sub-wavelength characteristics of MTS unit cells, each cell integrates an embedded ME-dipole element. Meanwhile, the MTS unit cells are perforated for the miniaturization of the sub-6 GHz antenna while accommodating the 4 × 4 mmW ME-dipole array. Therefore, both the sub-6 GHz MTS and the mmW ME-dipole share the same aperture and profile, resulting in a very compact size of 0.46 × 0.46 × 0.028 λL3 (λL is the wavelength in free space at 4.9 GHz). The open-loop resonator (OLR) structure is introduced to the metasurface for decoupling between the MTS cell and the ME-dipole in the mmW band. For validation, an antenna prototype is fabricated and tested.
- 16 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (11) , 9535-9540
Hyper-High-Order Modes Dielectric Resonator Antenna and Array With Extended Bandwidth and Stable High Gain
In this communication, the hyper-high-order modes (HHOMs) of the dielectric resonator (DR) is investigated for enhancing the gain of DR antenna (DRA). Benefitting from the flexible 3-D structure of the DRA, the HHOMs can be constructed in either planar/vertical or both, and they are equivalent to a set of magnetic dipoles in a 3-D distribution. Through theoretical analysis of the DRA TEmnp modes, where m, n and p represent the wave numbers in x-, y- and z-axis, it is found that when the sum (m+n+p) of equivalent magnetic dipoles is the same, the corresponding TE modes have close gain by optimizing the 3-D parameters. Based on this, the two TE223 and TE421 modes are chosen for designing the proposed DRA. To expand the bandwidth and achieve the stable in-band gain, the higher-order mode slot is used to excite the DRA, introducing additional resonances. The proposed antenna element achieves a gain range of 12.4-13.6 dBi. A 1×4 array is designed, fabricated, and measured. The HHOM not only contribute to a high gain, but also ensures sidelobe suppression even with a large interelement spacing due to the narrow beamwidth of the antenna element. The simulated and measured results show that the antenna array can achieve gains with the range of 17.4 to 19.2 dBi and 16.8 to 18.1 dBi, respectively. Owing to its high directivity, the proposed design presents a highly valuable solution for satellite communication in the Ku-band and thus possesses great application potential.
- 16 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (11) , 9535-9540
Hyper-High-Order Modes Dielectric Resonator Antenna and Array With Extended Bandwidth and Stable High Gain
In this communication, the hyper-high-order modes (HHOMs) of the dielectric resonator (DR) is investigated for enhancing the gain of DR antenna (DRA). Benefitting from the flexible 3-D structure of the DRA, the HHOMs can be constructed in either planar/vertical or both, and they are equivalent to a set of magnetic dipoles in a 3-D distribution. Through theoretical analysis of the DRA TEmnp modes, where m, n and p represent the wave numbers in x-, y- and z-axis, it is found that when the sum (m+n+p) of equivalent magnetic dipoles is the same, the corresponding TE modes have close gain by optimizing the 3-D parameters. Based on this, the two TE223 and TE421 modes are chosen for designing the proposed DRA. To expand the bandwidth and achieve the stable in-band gain, the higher-order mode slot is used to excite the DRA, introducing additional resonances. The proposed antenna element achieves a gain range of 12.4-13.6 dBi. A 1×4 array is designed, fabricated, and measured. The HHOM not only contribute to a high gain, but also ensures sidelobe suppression even with a large interelement spacing due to the narrow beamwidth of the antenna element. The simulated and measured results show that the antenna array can achieve gains with the range of 17.4 to 19.2 dBi and 16.8 to 18.1 dBi, respectively. Owing to its high directivity, the proposed design presents a highly valuable solution for satellite communication in the Ku-band and thus possesses great application potential.
- 13 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 24 (3) , 776-780
A Tri-Frequency Shared-Aperture Antenna for Cooperative Work of V2X and Millimeter-Wave Bands
The microwave (MW)/millimeter-wave (MMW) shared aperture technique is a promising approach to support different frequency bands within limited space. In this paper, a 1×4 beam-scanning linear antenna array operating at the MMW (28/39 GHz) band and a V2X (5.9 GHz) patch antenna are integrated to share the same aperture. Not only are the entire MMW bands covered, but also the mutually enhanced characteristic between the MW and MMW bands is achieved with the slot-loaded patch. The MW patch nested outside of the MMW radiators can enhance the gain and extend the beam-scanning angles of the MMW antenna array. Furthermore, the hollowed space reserved for MMW antenna can improve the radiation pattern of the MW patch TM21 mode. The proposed tri-band antenna was fabricated and measured. Measured results show that the MMW antenna can cover the bandwidths of 24.4-29.3 GHz/36.7-41.4 GHz, with the peak gains of 11 dBi/11.3 dBi at 28/39 GHz frequency bands, while the proposed MW antenna achieves a bandwidth of ∼170 MHz with a peak gain of 8.03 dBi.
- 13 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 24 (3) , 776-780
A Tri-Frequency Shared-Aperture Antenna for Cooperative Work of V2X and Millimeter-Wave Bands
The microwave (MW)/millimeter-wave (MMW) shared aperture technique is a promising approach to support different frequency bands within limited space. In this paper, a 1×4 beam-scanning linear antenna array operating at the MMW (28/39 GHz) band and a V2X (5.9 GHz) patch antenna are integrated to share the same aperture. Not only are the entire MMW bands covered, but also the mutually enhanced characteristic between the MW and MMW bands is achieved with the slot-loaded patch. The MW patch nested outside of the MMW radiators can enhance the gain and extend the beam-scanning angles of the MMW antenna array. Furthermore, the hollowed space reserved for MMW antenna can improve the radiation pattern of the MW patch TM21 mode. The proposed tri-band antenna was fabricated and measured. Measured results show that the MMW antenna can cover the bandwidths of 24.4-29.3 GHz/36.7-41.4 GHz, with the peak gains of 11 dBi/11.3 dBi at 28/39 GHz frequency bands, while the proposed MW antenna achieves a bandwidth of ∼170 MHz with a peak gain of 8.03 dBi.
- Open Access
- 27 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- Vol. 4, 982-989
Compact and Broadband Substrate Integrated Dielectric Resonator Antenna Suitable for 5G Millimeter-Wave Communications
To date, few broadband DRAs can cover n257, n258, n260, and n261 bands with a small physical footprint (e.g., < 0.4λ0×0.4λ0×0.15λ0, where λ0 is the free-space wavelength at 28GHz). This article proposes a compact and broadband substrate-integrated dielectric resonator antenna (SIDRA) suitable for 5G millimeterwave band applications. Four operating modes from three resonators, including TE111 and TE131 modes from the DR, slot mode from the H-shaped feeding slot, and patch mode from the inserted ring patch, are excited to achieve a bandwidth of 61.9% (24-45.5 GHz) with a compact size of 0.37λ0×0.37λ0×0.125λ0. The proposed DRA can be extended to an array with ~0.5λ0 element interval to obtain wide-angle beam scanning capability. A 1×4 SIDRA array was simulated, achieving beam-scanning area of ±45∘ and ±32∘ at the frequencies of 28 / 39 GHz. Further, the DRA array was fabricated and tested. It offers a measured 10-dB bandwidth (|S11|. -10 dB) of 60.4% (23.5-43.7 GHz), in which the gain varies between 10.1 to 12.5 dBi.
- 27 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- Vol. 4, 982-989
Open AccessCompact and Broadband Substrate Integrated Dielectric Resonator Antenna Suitable for 5G Millimeter-Wave Communications
To date, few broadband DRAs can cover n257, n258, n260, and n261 bands with a small physical footprint (e.g., < 0.4λ0×0.4λ0×0.15λ0, where λ0 is the free-space wavelength at 28GHz). This article proposes a compact and broadband substrate-integrated dielectric resonator antenna (SIDRA) suitable for 5G millimeterwave band applications. Four operating modes from three resonators, including TE111 and TE131 modes from the DR, slot mode from the H-shaped feeding slot, and patch mode from the inserted ring patch, are excited to achieve a bandwidth of 61.9% (24-45.5 GHz) with a compact size of 0.37λ0×0.37λ0×0.125λ0. The proposed DRA can be extended to an array with ~0.5λ0 element interval to obtain wide-angle beam scanning capability. A 1×4 SIDRA array was simulated, achieving beam-scanning area of ±45∘ and ±32∘ at the frequencies of 28 / 39 GHz. Further, the DRA array was fabricated and tested. It offers a measured 10-dB bandwidth (|S11|. -10 dB) of 60.4% (23.5-43.7 GHz), in which the gain varies between 10.1 to 12.5 dBi.
- Open Access
- 4 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- Vol. 3, 391-397
Compact and Low-Profile Linear-/Circular-Polarization Dielectric Resonator Antennas With Extended Bandwidths
The dielectric resonator antenna (DRA) with wide bandwidth, compact size and low profile is considered as an attractive candidate for 5G wireless communications. However, most of the reported DRAs either have bulky volumes or have limited bandwidths. In this paper, a kind of compact and low-profile DRA with extended bandwidth is proposed. By observing the E-field distribution differences between the two target modes and modifying the dielectric characteristics (such as material and dimension) of the designated region where the E-field is very weak for fundamental TE 111 mode but quite strong for high-order TE 131 mode, the frequency of TE 131 mode can be significantly affected and shifted down to merge with that of TE 111 mode which is less affected. As a result, extended operating bandwidth can be obtained. This technique also benefits from not having to enlarge the planar size of the high permittivity DR, therefore making the antenna compact enough for 5G beam-scanning and low profile applications. For demonstration, linear- and circular- polarization antenna prototypes were designed and measured. The LP antenna has a −10 dB impedance bandwidth of 17.3% and a peak gain of 7.1 dBi while the CP antenna achieves a 3-dB axial ratio (AR) bandwidth of 12% and a peak gain of 6.6 dBic. Both the antennas have compact volumes of no larger than $0.35{\lambda } _{0} \times 0.35{\lambda } _{0} \times 0.11{\lambda } _{0}$ . Based on the LP and CP antenna elements, two $1\times5$ antenna arrays with the capability of beam scanning are designed and simulated. Wide scanning angles of ±45° and ±40° can be obtained for the LP and CP arrays, respectively.
- 4 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- Vol. 3, 391-397
Open AccessCompact and Low-Profile Linear-/Circular-Polarization Dielectric Resonator Antennas With Extended Bandwidths
The dielectric resonator antenna (DRA) with wide bandwidth, compact size and low profile is considered as an attractive candidate for 5G wireless communications. However, most of the reported DRAs either have bulky volumes or have limited bandwidths. In this paper, a kind of compact and low-profile DRA with extended bandwidth is proposed. By observing the E-field distribution differences between the two target modes and modifying the dielectric characteristics (such as material and dimension) of the designated region where the E-field is very weak for fundamental TE 111 mode but quite strong for high-order TE 131 mode, the frequency of TE 131 mode can be significantly affected and shifted down to merge with that of TE 111 mode which is less affected. As a result, extended operating bandwidth can be obtained. This technique also benefits from not having to enlarge the planar size of the high permittivity DR, therefore making the antenna compact enough for 5G beam-scanning and low profile applications. For demonstration, linear- and circular- polarization antenna prototypes were designed and measured. The LP antenna has a −10 dB impedance bandwidth of 17.3% and a peak gain of 7.1 dBi while the CP antenna achieves a 3-dB axial ratio (AR) bandwidth of 12% and a peak gain of 6.6 dBic. Both the antennas have compact volumes of no larger than $0.35{\lambda } _{0} \times 0.35{\lambda } _{0} \times 0.11{\lambda } _{0}$ . Based on the LP and CP antenna elements, two $1\times5$ antenna arrays with the capability of beam scanning are designed and simulated. Wide scanning angles of ±45° and ±40° can be obtained for the LP and CP arrays, respectively.