Norbert Linz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Norbert Linz has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Alfred Vogel
Institute of Biomedical Optics University of Luebeck Peter-Monnik Weg 4 23562 Luebeck Germany
7 shared publications - Xiao-Xuan Liang
Univ. zu Lübeck (Germany)
5 shared publications - Sebastian Freidank
Univ. zu Lübeck (Germany)
4 shared publications Sebastian Freidank
University of Luebeck
2 shared publications- Alfred Leitenstorfer
University of Konstanz
1 shared publication Alfred Vogel
Institute of Biomedical Optics, University of Luebeck, Luebeck, Germany
1 shared publication
Latest Publications
- Open Access
- 31 July 2025
- Published by IOP Publishing in Reports on Progress in Physics
- Vol. 88 (8) , 088501
Laser-induced plasma formation and cavitation in water: from nanoeffects to extreme states of matter
We present an in-depth analysis of the energy dependence of optical breakdown in water by tightly focused laser pulses, from plasma formation to shock waves and cavitation. Laser pulses of fs to ns durations and UV to IR wavelengths are aberration-free focused through microscope objectives. Photography captures luminescent plasmas with submicrometer resolution, and bubble threshold and size are determined via probe beam scattering. The energy dependence of mechanical effects is quantified through the maximum bubble radius R max. We find three key scenarios depicting the interaction between multiphoton and avalanche ionization, recombination, and thermal ionization from nanoeffects near threshold to extreme energy densities. They include a previously unknown scenario that emerges with single-longitudinal-mode UV ns pulses from compact lasers. It enables cost-effective creation of nanoeffects, as demonstrated on corneal tissue and glass. High-resolution color photography revealed new insights in the spatiotemporal dynamics of plasma formation, with an interplay of breakdown waves, string formation by local instabilities of avalanche ionization, and radiative energy transport. Plasma volume data from photographs together with absorption measurements show that the average energy density of luminescent fs and ns plasmas is similar, ranging between 10 and 40 kJ cm−3. However, small hot regions with up to 400 kJ cm−3 are formed in ns breakdown. From the hot regions, energy is spread out via x-ray bremsstrahlung, forming a luminescent halo. Well above threshold, R max scales with E 1/3 across all scenarios, with 15%–20% conversion of laser energy into bubble energy. With increasing plasma energy density, an ever-larger energy fraction is converted into shock wave energy (75% at 40 kJ cm−3). We discuss guidelines for parameter selection in laser surgery and material processing in bulk media as well as for laser ablation and breakdown spectroscopy in liquids. Finally, we suggest roadmaps for future experimental and modeling work, and for broadening applications.
- 31 July 2025
- Published by IOP Publishing in Reports on Progress in Physics
- Vol. 88 (8) , 088501
Open AccessLaser-induced plasma formation and cavitation in water: from nanoeffects to extreme states of matter
We present an in-depth analysis of the energy dependence of optical breakdown in water by tightly focused laser pulses, from plasma formation to shock waves and cavitation. Laser pulses of fs to ns durations and UV to IR wavelengths are aberration-free focused through microscope objectives. Photography captures luminescent plasmas with submicrometer resolution, and bubble threshold and size are determined via probe beam scattering. The energy dependence of mechanical effects is quantified through the maximum bubble radius R max. We find three key scenarios depicting the interaction between multiphoton and avalanche ionization, recombination, and thermal ionization from nanoeffects near threshold to extreme energy densities. They include a previously unknown scenario that emerges with single-longitudinal-mode UV ns pulses from compact lasers. It enables cost-effective creation of nanoeffects, as demonstrated on corneal tissue and glass. High-resolution color photography revealed new insights in the spatiotemporal dynamics of plasma formation, with an interplay of breakdown waves, string formation by local instabilities of avalanche ionization, and radiative energy transport. Plasma volume data from photographs together with absorption measurements show that the average energy density of luminescent fs and ns plasmas is similar, ranging between 10 and 40 kJ cm−3. However, small hot regions with up to 400 kJ cm−3 are formed in ns breakdown. From the hot regions, energy is spread out via x-ray bremsstrahlung, forming a luminescent halo. Well above threshold, R max scales with E 1/3 across all scenarios, with 15%–20% conversion of laser energy into bubble energy. With increasing plasma energy density, an ever-larger energy fraction is converted into shock wave energy (75% at 40 kJ cm−3). We discuss guidelines for parameter selection in laser surgery and material processing in bulk media as well as for laser ablation and breakdown spectroscopy in liquids. Finally, we suggest roadmaps for future experimental and modeling work, and for broadening applications.
- Open Access
- 12 June 2023
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 120 (25)
Dissection of DNA damage and repair pathways in live cells by femtosecond laser microirradiation and free-electron modeling
Understanding and predicting the outcome of the interaction of light with DNA has a significant impact on the study of DNA repair and radiotherapy. We report on a combination of femtosecond pulsed laser microirradiation at different wavelengths, quantitative imaging, and numerical modeling that yields a comprehensive picture of photon-mediated and free-electron-mediated DNA damage pathways in live cells. Laser irradiation was performed under highly standardized conditions at four wavelengths between 515 nm and 1,030 nm, enabling to study two-photon photochemical and free-electron-mediated DNA damage in situ. We quantitatively assessed cyclobutane pyrimidine dimer (CPD) and γH2AX-specific immunofluorescence signals to calibrate the damage threshold dose at these wavelengths and performed a comparative analysis of the recruitment of DNA repair factors xeroderma pigmentosum complementation group C (XPC) and Nijmegen breakage syndrome 1 (Nbs1). Our results show that two-photon-induced photochemical CPD generation dominates at 515 nm, while electron-mediated damage dominates at wavelengths ≥620 nm. The recruitment analysis revealed a cross talk between nucleotide excision and homologous recombination DNA repair pathways at 515 nm. Numerical simulations predicted electron densities and electron energy spectra, which govern the yield functions of a variety of direct electron-mediated DNA damage pathways and of indirect damage by • OH radicals resulting from laser and electron interactions with water. Combining these data with information on free electron–DNA interactions gained in artificial systems, we provide a conceptual framework for the interpretation of the wavelength dependence of laser-induced DNA damage that may guide the selection of irradiation parameters in studies and applications that require the selective induction of DNA lesions.
- 12 June 2023
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 120 (25)
Open AccessDissection of DNA damage and repair pathways in live cells by femtosecond laser microirradiation and free-electron modeling
Understanding and predicting the outcome of the interaction of light with DNA has a significant impact on the study of DNA repair and radiotherapy. We report on a combination of femtosecond pulsed laser microirradiation at different wavelengths, quantitative imaging, and numerical modeling that yields a comprehensive picture of photon-mediated and free-electron-mediated DNA damage pathways in live cells. Laser irradiation was performed under highly standardized conditions at four wavelengths between 515 nm and 1,030 nm, enabling to study two-photon photochemical and free-electron-mediated DNA damage in situ. We quantitatively assessed cyclobutane pyrimidine dimer (CPD) and γH2AX-specific immunofluorescence signals to calibrate the damage threshold dose at these wavelengths and performed a comparative analysis of the recruitment of DNA repair factors xeroderma pigmentosum complementation group C (XPC) and Nijmegen breakage syndrome 1 (Nbs1). Our results show that two-photon-induced photochemical CPD generation dominates at 515 nm, while electron-mediated damage dominates at wavelengths ≥620 nm. The recruitment analysis revealed a cross talk between nucleotide excision and homologous recombination DNA repair pathways at 515 nm. Numerical simulations predicted electron densities and electron energy spectra, which govern the yield functions of a variety of direct electron-mediated DNA damage pathways and of indirect damage by • OH radicals resulting from laser and electron interactions with water. Combining these data with information on free electron–DNA interactions gained in artificial systems, we provide a conceptual framework for the interpretation of the wavelength dependence of laser-induced DNA damage that may guide the selection of irradiation parameters in studies and applications that require the selective induction of DNA lesions.
- 7 April 2023
- Published by Springer Nature
- p. 1217-1245
Laser Micro- and Nanostructuring for Refractive Eye Surgery
- 7 April 2023
- Published by Springer Nature
- p. 1217-1245
Laser Micro- and Nanostructuring for Refractive Eye Surgery
- 26 April 2022
- Published by Optica Publishing Group in Biomedical Optics Express
- Vol. 13 (5) , 3056-3079
Mechanisms of corneal intrastromal laser dissection for refractive surgery: ultra-high-speed photographic investigation at up to 50 million frames per second
Every year, more than a million refractive eye surgeries using femtosecond lasers are performed but the intrastromal cutting process remains an area of development. We investigated the mechanisms of laser dissection in cornea by ultra-high-speed photography. We found that the intrastromal bubble forms multiple lobes along the elongated laser plasma and the overlying lobes expand along the corneal lamellae. Videography demonstrated that the cutting process relies on crack propagation in the stroma along the bubble lobes with the crack originating from the pre-existing bubble layer. These insights are important for further improvement of the cutting mechanisms in refractive surgery.
- 26 April 2022
- Published by Optica Publishing Group in Biomedical Optics Express
- Vol. 13 (5) , 3056-3079
Mechanisms of corneal intrastromal laser dissection for refractive surgery: ultra-high-speed photographic investigation at up to 50 million frames per second
Every year, more than a million refractive eye surgeries using femtosecond lasers are performed but the intrastromal cutting process remains an area of development. We investigated the mechanisms of laser dissection in cornea by ultra-high-speed photography. We found that the intrastromal bubble forms multiple lobes along the elongated laser plasma and the overlying lobes expand along the corneal lamellae. Videography demonstrated that the cutting process relies on crack propagation in the stroma along the bubble lobes with the crack originating from the pre-existing bubble layer. These insights are important for further improvement of the cutting mechanisms in refractive surgery.
- Top Cited PapersOpen Access
- 12 April 2022
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 940, A5
Comprehensive analysis of spherical bubble oscillations and shock wave emission in laser-induced cavitation
The dynamics of spherical laser-induced cavitation bubbles in water is investigated by plasma photography, time-resolved shadowgraphs and sensitive single-shot probe beam scattering that portrays the transition from initial nonlinear to late linear oscillations. The frequency of late oscillations yields the bubble's gas content. Numerical simulations with an extended Gilmore model using plasma size as input and oscillation times as fit parameter provide insights into experimentally not accessible bubble parameters and shock wave emission. Model extensions include a term covering the initial shock-driven acceleration of the bubble wall, an automated method determining shock front position and pressure decay and a complete energy balance for the partitioning of absorbed laser energy into vaporization, bubble and shock wave energy and dissipation through viscosity and condensation. These tools are used for analysing a scattering signal covering 102 oscillation cycles from a bubble with 36 μm maximum radius produced by a plasma with 1550 K average temperature. Predicted bubble wall velocities during expansion agree well with experimental data. Upon first collapse, most energy was stored in the compressed liquid around the bubble and radiated away acoustically. The collapsed bubble contained more vapour than gas and had a pressure of 13.5 GPa. The decay of the rebound shock wave pressure with radius r was initially $\mathrm{\ \propto }{r^{ - 1.8}}$ , and energy dissipation at the shock front heated the liquid near the bubble wall to temperatures above the superheat limit. The shock-induced temperature rise reduces damping during late bubble oscillations. Damping in first collapse increases significantly for small bubbles with less than 10 μm radius.- 12 April 2022
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 940, A5
Top Cited PapersOpen AccessComprehensive analysis of spherical bubble oscillations and shock wave emission in laser-induced cavitation
The dynamics of spherical laser-induced cavitation bubbles in water is investigated by plasma photography, time-resolved shadowgraphs and sensitive single-shot probe beam scattering that portrays the transition from initial nonlinear to late linear oscillations. The frequency of late oscillations yields the bubble's gas content. Numerical simulations with an extended Gilmore model using plasma size as input and oscillation times as fit parameter provide insights into experimentally not accessible bubble parameters and shock wave emission. Model extensions include a term covering the initial shock-driven acceleration of the bubble wall, an automated method determining shock front position and pressure decay and a complete energy balance for the partitioning of absorbed laser energy into vaporization, bubble and shock wave energy and dissipation through viscosity and condensation. These tools are used for analysing a scattering signal covering 102 oscillation cycles from a bubble with 36 μm maximum radius produced by a plasma with 1550 K average temperature. Predicted bubble wall velocities during expansion agree well with experimental data. Upon first collapse, most energy was stored in the compressed liquid around the bubble and radiated away acoustically. The collapsed bubble contained more vapour than gas and had a pressure of 13.5 GPa. The decay of the rebound shock wave pressure with radius r was initially $\mathrm{\ \propto }{r^{ - 1.8}}$ , and energy dissipation at the shock front heated the liquid near the bubble wall to temperatures above the superheat limit. The shock-induced temperature rise reduces damping during late bubble oscillations. Damping in first collapse increases significantly for small bubbles with less than 10 μm radius. - 5 March 2021
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11676, 1167613-35
Ultrafast speckle-free time-resolved photography for the investigation of pulsed laser ablation in liquids
Pulsed laser ablation in liquids (LAL) is a growing field for the generation of metallic nanoparticles, but a comprehensive picture of the fundamental mechanisms is still missing. The process is always associated with rapid material ejection, shock waves and cavitation. Time-resolved photography with speckle-free illumination at exposure times below 200 ps can “freeze” these events and provide diffraction-limited resolution. We present a novel light source fulfilling these demands based on a SBS compressed Q-switched laser pulse pumping a dye cell and illustrate it’s utility through photography of LAL events on a gold target.
- 5 March 2021
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11676, 1167613-35
Ultrafast speckle-free time-resolved photography for the investigation of pulsed laser ablation in liquids
Pulsed laser ablation in liquids (LAL) is a growing field for the generation of metallic nanoparticles, but a comprehensive picture of the fundamental mechanisms is still missing. The process is always associated with rapid material ejection, shock waves and cavitation. Time-resolved photography with speckle-free illumination at exposure times below 200 ps can “freeze” these events and provide diffraction-limited resolution. We present a novel light source fulfilling these demands based on a SBS compressed Q-switched laser pulse pumping a dye cell and illustrate it’s utility through photography of LAL events on a gold target.
- 5 March 2021
- Published by SPIE-Intl Soc Optical Eng
- p. 1
Free-electron and thermally mediated pathways of photodamage in nonlinear microscopy
SPIE Digital Library Proceedings
- 5 March 2021
- Published by SPIE-Intl Soc Optical Eng
- p. 1
Free-electron and thermally mediated pathways of photodamage in nonlinear microscopy
SPIE Digital Library Proceedings
- Open Access
- 1 September 2020
- Published by Association for Research in Vision and Ophthalmology (ARVO) in Translational Vision Science & Technology
- Vol. 9 (10) , 22
Optical Vortex Beam for Gentle and Ultraprecise Intrastromal Corneal Dissection in Refractive Surgery
Purpose: We introduce a novel focus shaping concept for intrastromal corneal dissection that facilitates cleavage along corneal lamellae, and we analyze laser–tissue interactions governing cutting effectiveness and mechanical side effects. Methods: Focus shaping was achieved by a spiral phase plate that converts an incident Gaussian beam into a Laguerre–Gaussian beam with a helical phase. Such vortex beams have zero intensity at their center, are propagation invariant, and possess a ring focus equal in length to the Gaussian focus but with a larger diameter. Cutting precision and the required absorbed energy for flap dissection were compared for Gaussian and vortex beams on ex vivo porcine corneal specimens at pulse durations between 480 fs and 9 ps. Cutting quality and bubble formation were characterized by scanning electron microscopy and macro photography. Results: With the vortex beam, the cuts were much smoother. Bubble formation was markedly reduced because cutting can be performed close to the bubble threshold, whereas with the Gaussian beam energies well above threshold are needed. Although the incident energy at the flap dissection threshold was slightly larger for the vortex beam, the absorbed energy was much smaller and contributed more effectively to cutting. This reduced plasma-induced pressure more than sevenfold. Conclusions: The vortex beam approach for corneal dissection is a simple, versatile, and cost-effective way of improving the precision of refractive surgery while reducing bubble formation and pressure-related mechanical side effects. Translational Relevance: Phase plates for propagation invariant vortex beams are easily implemented in the beam path of next-generation clinical devices.
- 1 September 2020
- Published by Association for Research in Vision and Ophthalmology (ARVO) in Translational Vision Science & Technology
- Vol. 9 (10) , 22
Open AccessOptical Vortex Beam for Gentle and Ultraprecise Intrastromal Corneal Dissection in Refractive Surgery
Purpose: We introduce a novel focus shaping concept for intrastromal corneal dissection that facilitates cleavage along corneal lamellae, and we analyze laser–tissue interactions governing cutting effectiveness and mechanical side effects. Methods: Focus shaping was achieved by a spiral phase plate that converts an incident Gaussian beam into a Laguerre–Gaussian beam with a helical phase. Such vortex beams have zero intensity at their center, are propagation invariant, and possess a ring focus equal in length to the Gaussian focus but with a larger diameter. Cutting precision and the required absorbed energy for flap dissection were compared for Gaussian and vortex beams on ex vivo porcine corneal specimens at pulse durations between 480 fs and 9 ps. Cutting quality and bubble formation were characterized by scanning electron microscopy and macro photography. Results: With the vortex beam, the cuts were much smoother. Bubble formation was markedly reduced because cutting can be performed close to the bubble threshold, whereas with the Gaussian beam energies well above threshold are needed. Although the incident energy at the flap dissection threshold was slightly larger for the vortex beam, the absorbed energy was much smaller and contributed more effectively to cutting. This reduced plasma-induced pressure more than sevenfold. Conclusions: The vortex beam approach for corneal dissection is a simple, versatile, and cost-effective way of improving the precision of refractive surgery while reducing bubble formation and pressure-related mechanical side effects. Translational Relevance: Phase plates for propagation invariant vortex beams are easily implemented in the beam path of next-generation clinical devices.