Maria Spanou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Maria Spanou has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Demetris Nicolaides
Frederick University
3 shared publications - Konstantina Oikonomopoulou
Department of Civil and Environmental Engineering, University of Cyprus, 75 Kallipoleos Av., P.O. Box 20537, Nicosia 1678, Cyprus
3 shared publications - Michael Frixos Petrou
Department of Civil and Environmental Engineering, University of Cyprus, Nicosia, Cyprus
2 shared publications - Pericles Savva
Latomia Pharmakas, 23 Themistokli Dervi Av., S.TA.D.Y.L. Building, P.O. Box 23504, Nicosia 1066, Cyprus
2 shared publications - Sokrates Ioannou
Department of Civil Engineering, Abu Dhabi Men’s Campus Higher Colleges of Technology, Abu Dhabi 25026, United Arab Emirates
2 shared publications - Alexandros Michaelides
RTD TALOS Ltd., Nicosia 2404, Cyprus
1 shared publication
Latest Publications
- Open Access
- 1 December 2025
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1558 (1)
Valorization of Waste Diabase Mud from Aggregate Washing for the Development of Value-Added Building Materials
Geopolymerization has emerged as a promising technology for producing sustainable and environmentally friendly construction materials by utilizing various industrial byproducts and waste materials. This study investigates the utilization of the waste diabase mud generated during aggregate washing in Cypriot quarries as a key raw material for the development of geopolymer building materials. Research has focused on the influence of critical alkali activation parameters, such as sodium hydroxide (NaOH) concentration, sodium silicate (Na₂SiO₃) to sodium hydroxide ratio, and curing temperature and time, on the mechanical properties of the resulting geopolymers. Findings show that optimal compressive strength and durability are achieved under controlled curing conditions, when using sodium hydroxide concentrations between 8 M and 10 M. Further enhancement of the geopolymer matrix was explored through the incorporation of ground granulated blast furnace slag and metakaolin, which led to improved mechanical properties and increased sustainability. This work underscores the environmental benefits of reusing the waste diabase mud in the production of construction and building materials, contributing to industrial waste reduction and lowering carbon emissions compared to conventional Portland cement-products. The results support the broader implementation of geopolymer technology in sustainable construction practices.
- 1 December 2025
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1558 (1)
Open AccessValorization of Waste Diabase Mud from Aggregate Washing for the Development of Value-Added Building Materials
Geopolymerization has emerged as a promising technology for producing sustainable and environmentally friendly construction materials by utilizing various industrial byproducts and waste materials. This study investigates the utilization of the waste diabase mud generated during aggregate washing in Cypriot quarries as a key raw material for the development of geopolymer building materials. Research has focused on the influence of critical alkali activation parameters, such as sodium hydroxide (NaOH) concentration, sodium silicate (Na₂SiO₃) to sodium hydroxide ratio, and curing temperature and time, on the mechanical properties of the resulting geopolymers. Findings show that optimal compressive strength and durability are achieved under controlled curing conditions, when using sodium hydroxide concentrations between 8 M and 10 M. Further enhancement of the geopolymer matrix was explored through the incorporation of ground granulated blast furnace slag and metakaolin, which led to improved mechanical properties and increased sustainability. This work underscores the environmental benefits of reusing the waste diabase mud in the production of construction and building materials, contributing to industrial waste reduction and lowering carbon emissions compared to conventional Portland cement-products. The results support the broader implementation of geopolymer technology in sustainable construction practices.
- Open Access
Study on the Design and Development of Advanced Inorganic Polymers for Thermal Energy Storage (TES) Systems
Thermal Energy Storage (TES) technologies improve solar power dispatchability by addressing the important challenge of energy intermittency. Sensible heat energy storage technology using materials based on Ordinary Portland Cement (OPC) is the simplest and most economical. However, the operation of these materials is limited to temperatures below 400 °C due to the structural degradation of OPC at this temperature. This paper investigates the design and development of inorganic polymers based on Construction and Demolition Waste (CDW) as a sustainable, low-cost, and environmentally friendly alternative to OPC-based materials for high-temperature sensible TES applications. Based on the ternary systems Na2O-SiO2-Al2O3 and K2O-SiO2-Al2O3, representative compositions of CDW-based inorganic polymers were theoretically designed and evaluated using the thermochemical software FactSage 7.0. The experimental verification of the theoretically designed inorganic polymers confirmed that they can withstand temperatures higher than 500 and up to 700 °C. The optimized materials developed compressive strength around 20 MPa, which was improved with temperatures up to 500 °C and then decreased. Moreover, they presented thermal capacities from 600 to 1090 J kg−1 °C −1, thermal diffusivity in the range of 4.7–5.6 × 10−7 m2 s−1, and thermal conductivity from 0.6 to 1 W m−1 °C−1. These properties render the developed inorganic polymers significant candidates for TES applications.
Open AccessStudy on the Design and Development of Advanced Inorganic Polymers for Thermal Energy Storage (TES) Systems
Thermal Energy Storage (TES) technologies improve solar power dispatchability by addressing the important challenge of energy intermittency. Sensible heat energy storage technology using materials based on Ordinary Portland Cement (OPC) is the simplest and most economical. However, the operation of these materials is limited to temperatures below 400 °C due to the structural degradation of OPC at this temperature. This paper investigates the design and development of inorganic polymers based on Construction and Demolition Waste (CDW) as a sustainable, low-cost, and environmentally friendly alternative to OPC-based materials for high-temperature sensible TES applications. Based on the ternary systems Na2O-SiO2-Al2O3 and K2O-SiO2-Al2O3, representative compositions of CDW-based inorganic polymers were theoretically designed and evaluated using the thermochemical software FactSage 7.0. The experimental verification of the theoretically designed inorganic polymers confirmed that they can withstand temperatures higher than 500 and up to 700 °C. The optimized materials developed compressive strength around 20 MPa, which was improved with temperatures up to 500 °C and then decreased. Moreover, they presented thermal capacities from 600 to 1090 J kg−1 °C −1, thermal diffusivity in the range of 4.7–5.6 × 10−7 m2 s−1, and thermal conductivity from 0.6 to 1 W m−1 °C−1. These properties render the developed inorganic polymers significant candidates for TES applications.
- Open Access
Investigation of the Geopolymerization Potential of a Waste Silica-Rich Diabase Mud
Diabase mud (DM) is a silica-rich residue yielding from aggregate crushing and washing operations in quarries. This work focuses on identifying the geopolymerization potential of a diabase mud through characterization of its mineralogical composition, investigation of its reactivity, and assessment of the early compressive strengths of alkali activated mixtures formulated based on the mud’s dissolution results. The findings suggest that considerably low amounts of Al and Si metals were dissolved following the dissolution tests conducted on DM, however, the incorporation of small quantities of CEM I, gypsum, and metakaolin (MK) moderately at a Na2SiO3:NaOH ratio of 50:50 and with a molarity of NaOH of 4 M enhanced the geopolymerization compared to low L/S ratio mixtures cured at different conditions. When M was increasing, the high L/S ratio mixtures exhibited fluctuations in strengths, especially beyond a 10 M NaOH molarity. Maximum strengths of mixtures at equivalent molarity of 10 were achieved when the Na2SiO3:NaOH ratio reached 30:70, regardless of the ambient conditions and the presence of CEM I. The curing conditions, the ratio of Na2SO3:NaOH, and the presence of CEM I in the DM-based mixtures did not appear to significantly affect the mixture when NaOH concentration was between 2 M and 4 M; at higher molarities, however, these enhanced the strengths of the geopolymerized DM.
Open AccessInvestigation of the Geopolymerization Potential of a Waste Silica-Rich Diabase Mud
Diabase mud (DM) is a silica-rich residue yielding from aggregate crushing and washing operations in quarries. This work focuses on identifying the geopolymerization potential of a diabase mud through characterization of its mineralogical composition, investigation of its reactivity, and assessment of the early compressive strengths of alkali activated mixtures formulated based on the mud’s dissolution results. The findings suggest that considerably low amounts of Al and Si metals were dissolved following the dissolution tests conducted on DM, however, the incorporation of small quantities of CEM I, gypsum, and metakaolin (MK) moderately at a Na2SiO3:NaOH ratio of 50:50 and with a molarity of NaOH of 4 M enhanced the geopolymerization compared to low L/S ratio mixtures cured at different conditions. When M was increasing, the high L/S ratio mixtures exhibited fluctuations in strengths, especially beyond a 10 M NaOH molarity. Maximum strengths of mixtures at equivalent molarity of 10 were achieved when the Na2SiO3:NaOH ratio reached 30:70, regardless of the ambient conditions and the presence of CEM I. The curing conditions, the ratio of Na2SO3:NaOH, and the presence of CEM I in the DM-based mixtures did not appear to significantly affect the mixture when NaOH concentration was between 2 M and 4 M; at higher molarities, however, these enhanced the strengths of the geopolymerized DM.
- Open Access
Effect of Mechanically Treated Recycled Aggregates on the Long Term Mechanical Properties and Durability of Concrete
The objective of this research was to study the effect of an optimal mechanical treatment method to reduce the mortar adhered on recycled aggregates (RCA) on the long-term mechanical properties and durability of concretes containing RCA at different replacement levels. It was found that concretes incorporating treated RCA exhibited sharper and more significant increase on 90- and 365-day compressive strengths than any other investigated mixture. The same mixtures also benefitted from a ‘shrinkage-controlling’ effect, where strains and mass losses were reduced by almost 15% and 10%, respectively, compared to the reference concrete. While sulfate resistance and carbonation resistance are predominantly defined by the hydration products available within the cement paste and not to a large extent by the aggregate type and quality, the incorporation of either treated or untreated RCA in concrete did not appear to expose RACs to significant durability threats.
Open AccessEffect of Mechanically Treated Recycled Aggregates on the Long Term Mechanical Properties and Durability of Concrete
The objective of this research was to study the effect of an optimal mechanical treatment method to reduce the mortar adhered on recycled aggregates (RCA) on the long-term mechanical properties and durability of concretes containing RCA at different replacement levels. It was found that concretes incorporating treated RCA exhibited sharper and more significant increase on 90- and 365-day compressive strengths than any other investigated mixture. The same mixtures also benefitted from a ‘shrinkage-controlling’ effect, where strains and mass losses were reduced by almost 15% and 10%, respectively, compared to the reference concrete. While sulfate resistance and carbonation resistance are predominantly defined by the hydration products available within the cement paste and not to a large extent by the aggregate type and quality, the incorporation of either treated or untreated RCA in concrete did not appear to expose RACs to significant durability threats.