Xiaoguang Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Xiaoguang Wang has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
Qi Lin
School of Aerospace Engineering, Xiamen University, Xiamen, China
5 shared publications- Xu Liu
School of Aerospace Engineering, Xiamen University 1 , Xiamen 361102
3 shared publications - Zhilong Chen
School of Aerospace Engineering, Xiamen University 1 , Xiamen 361102
3 shared publications Chulun Shen
Xiamen University, Xiamen 361102, People’s Republic of China
2 shared publications- Qi Lin
School of Aerospace Engineering, Xiamen University 1 , Xiamen 361102
2 shared publications Wenzhao Dong
2 shared publications
Latest Publications
- Open Access
- 14 August 2026
- Published by Springer Nature in Advances in Aerodynamics
- Vol. 8 (1) , 24
Simulation of aircraft unstable motions and unsteady aerodynamic testing with cable-driven parallel suspension system
This paper presents the development and experimental validation of a novel cable-driven parallel suspension mechanism (CDPSM) for investigating unstable, high-angle-of-attack aerodynamics in low-speed wind tunnel. Designed to overcome the limitations of conventional testing in simulating post-stall flight dynamics, the six-degree-of-freedom CDPSM enables precise execution of highly nonlinear motions, specifically amplitude-frequency sweep maneuvers. The system achieves this through a geometric mapping between aircraft pose commands and cable lengths, governed by a terminal sliding mode controller that integrates an extended state observer for high-fidelity motion control. A series of unsteady aerodynamic tests, incorporating coupled frequency-amplitude variations, were conducted with forces measured via an internal six-component balance. The results confirm the CDPSM’s capability to accurately simulate prescribed unstable motions and capture the ensuing aerodynamic responses. Critically, the measured forces revealed significantly more complex hysteresis loops and variation patterns than those obtainable from traditional sinusoidal motion tests, highlighting the unique capabilities of the proposed system for investigating advanced post-stall flight dynamics.
- 14 August 2026
- Published by Springer Nature in Advances in Aerodynamics
- Vol. 8 (1) , 24
Open AccessSimulation of aircraft unstable motions and unsteady aerodynamic testing with cable-driven parallel suspension system
This paper presents the development and experimental validation of a novel cable-driven parallel suspension mechanism (CDPSM) for investigating unstable, high-angle-of-attack aerodynamics in low-speed wind tunnel. Designed to overcome the limitations of conventional testing in simulating post-stall flight dynamics, the six-degree-of-freedom CDPSM enables precise execution of highly nonlinear motions, specifically amplitude-frequency sweep maneuvers. The system achieves this through a geometric mapping between aircraft pose commands and cable lengths, governed by a terminal sliding mode controller that integrates an extended state observer for high-fidelity motion control. A series of unsteady aerodynamic tests, incorporating coupled frequency-amplitude variations, were conducted with forces measured via an internal six-component balance. The results confirm the CDPSM’s capability to accurately simulate prescribed unstable motions and capture the ensuing aerodynamic responses. Critically, the measured forces revealed significantly more complex hysteresis loops and variation patterns than those obtainable from traditional sinusoidal motion tests, highlighting the unique capabilities of the proposed system for investigating advanced post-stall flight dynamics.
- 1 July 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (7)
A symbolic-regression-based turbulence modeling method with structural consistency constraints
A novel explicit turbulence modeling framework is developed for high-Reynolds-number airfoil stall flows dominated by adverse pressure gradients (APG). The proposed framework integrates weighted proper orthogonal decomposition (wPOD) with a cross-condition structural consistency constraint. High-fidelity turbulence model correction fields are first obtained under multiple flow conditions through a field inversion procedure. An APG-wPOD is then applied to extract dominant low-dimensional structures shared across different conditions, effectively suppressing data noise in the inversion results. Within the resulting reduced modal space, an adaptive sampling strategy driven by the energy distribution of the dominant modes is employed to identify representative samples associated with stall onset and flow separation dynamics. Based on these samples, an explicit analytic correction model is constructed using symbolic regression. In addition, a cross-condition structural consistency constraint is imposed to ensure that the derived model preserves a stable and physically meaningful functional form across different flow conditions. Numerical results obtained for multiple operating conditions and different airfoil geometries demonstrate that the proposed method significantly improves prediction accuracy for high-Reynolds-number airfoil stall flows, while maintaining the predictive capability of the baseline turbulence model for attached-flow regimes. The framework also exhibits favorable numerical stability and strong cross-condition generalization performance.
- 1 July 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (7)
A symbolic-regression-based turbulence modeling method with structural consistency constraints
A novel explicit turbulence modeling framework is developed for high-Reynolds-number airfoil stall flows dominated by adverse pressure gradients (APG). The proposed framework integrates weighted proper orthogonal decomposition (wPOD) with a cross-condition structural consistency constraint. High-fidelity turbulence model correction fields are first obtained under multiple flow conditions through a field inversion procedure. An APG-wPOD is then applied to extract dominant low-dimensional structures shared across different conditions, effectively suppressing data noise in the inversion results. Within the resulting reduced modal space, an adaptive sampling strategy driven by the energy distribution of the dominant modes is employed to identify representative samples associated with stall onset and flow separation dynamics. Based on these samples, an explicit analytic correction model is constructed using symbolic regression. In addition, a cross-condition structural consistency constraint is imposed to ensure that the derived model preserves a stable and physically meaningful functional form across different flow conditions. Numerical results obtained for multiple operating conditions and different airfoil geometries demonstrate that the proposed method significantly improves prediction accuracy for high-Reynolds-number airfoil stall flows, while maintaining the predictive capability of the baseline turbulence model for attached-flow regimes. The framework also exhibits favorable numerical stability and strong cross-condition generalization performance.
- 18 June 2026
- Published by Elsevier in Ocean Engineering
- Vol. 363
Feature-fusion-based prediction of impact loads during high-speed water entry of vehicles
- 18 June 2026
- Published by Elsevier in Ocean Engineering
- Vol. 363
Feature-fusion-based prediction of impact loads during high-speed water entry of vehicles
- 1 June 2026
- Published by Pleiades Publishing Ltd in Fluid Dynamics
- Vol. 61 (3) , 56
Shock Response Spectrum Characteristics of Transient Fluid-Structure Interaction for High-Speed Water Entry Vehicle
The high-speed water entry of trans-media vehicles involves complex fluid-structure interactions; the strong nonlinearity of impact loads and structural dynamic responses poses core challenges for accurately characterizing impact environments and revealing shock response spectrum characteristics in the flight vehicle safety design. This paper utilizes the arbitrary Lagrangian–Eulerian (ALE) method to develop a high-fidelity predictive numerical model for simulating high-speed water entry impacts. The impact pressure, the cavitation evolution, and variations in the axial/normal forces are systematically analyzed by simulating the impact process. The acceleration time histories at critical measurement point are also extracted, and its shock response spectrum (SRS) is developed to characterize the frequency-domain attributes of the shock environment. Then, the effects of various water-entry velocities and angles are studied. The results show that the vehicle undergoes extreme transient loads during initial water entry, with the wetting pressure playing a critical role in multi-directional loading. Further analysis of the shock response spectrum reveals that the axial impact load (peak: 1.46 × 105 N) demonstrates a peak amplification factor of 1.409 at approximately 400 Hz, while a local monitoring point’s axial acceleration (peak: 762 g) exhibits a significantly higher amplification factor of 5.47 at around 30 kHz. Additionally, the increased speed and angle markedly alter the time-domain response characteristics, yet negligibly affect the peak amplification factor in the shock response spectrum. Instead, the primary effect is a shift in the peak frequency toward higher frequencies. These findings provide important insights for the structural design and protection of water-entry vehicles, highlighting the need to consider not only extreme load-induced damage but also resonance failure caused by specific frequency components.
- 1 June 2026
- Published by Pleiades Publishing Ltd in Fluid Dynamics
- Vol. 61 (3) , 56
Shock Response Spectrum Characteristics of Transient Fluid-Structure Interaction for High-Speed Water Entry Vehicle
The high-speed water entry of trans-media vehicles involves complex fluid-structure interactions; the strong nonlinearity of impact loads and structural dynamic responses poses core challenges for accurately characterizing impact environments and revealing shock response spectrum characteristics in the flight vehicle safety design. This paper utilizes the arbitrary Lagrangian–Eulerian (ALE) method to develop a high-fidelity predictive numerical model for simulating high-speed water entry impacts. The impact pressure, the cavitation evolution, and variations in the axial/normal forces are systematically analyzed by simulating the impact process. The acceleration time histories at critical measurement point are also extracted, and its shock response spectrum (SRS) is developed to characterize the frequency-domain attributes of the shock environment. Then, the effects of various water-entry velocities and angles are studied. The results show that the vehicle undergoes extreme transient loads during initial water entry, with the wetting pressure playing a critical role in multi-directional loading. Further analysis of the shock response spectrum reveals that the axial impact load (peak: 1.46 × 105 N) demonstrates a peak amplification factor of 1.409 at approximately 400 Hz, while a local monitoring point’s axial acceleration (peak: 762 g) exhibits a significantly higher amplification factor of 5.47 at around 30 kHz. Additionally, the increased speed and angle markedly alter the time-domain response characteristics, yet negligibly affect the peak amplification factor in the shock response spectrum. Instead, the primary effect is a shift in the peak frequency toward higher frequencies. These findings provide important insights for the structural design and protection of water-entry vehicles, highlighting the need to consider not only extreme load-induced damage but also resonance failure caused by specific frequency components.
- Open Access
- 12 January 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (2) , 782
Kinematic Solving and Stable Workspace Analysis of a Spatial Under-Constrained Cable-Driven Parallel Mechanism
This study systematically investigates the kinematic characteristics and static stability of a spatial under-constrained four-cable-driven parallel mechanism, specifically designed for supporting aircraft models in wind tunnel tests. Addressing the inherent strong coupling between kinematics and statics in such systems, an integrated solution framework is proposed. Firstly, a hybrid intelligent algorithm integrating genetic algorithm, chaos optimization, and particle swarm optimization is introduced to efficiently solve the direct and inverse geometric-statics problems, ensuring the identification of physically feasible equilibrium configurations under constraints such as cable tension limits and mechanical interference. Subsequently, a stability evaluation method based on the eigenvalue analysis of the system’s total stiffness matrix is employed, establishing a criterion (minimum eigenvalue λmin > 0) to identify statically stable equilibrium points. Finally, the static feasible workspace and the static stable workspace are systematically analyzed and quantified, providing practical operational limits for mechanism design and trajectory planning. The effectiveness of the proposed solution framework is validated through numerical computations, simulations, and experimental tests, demonstrating its superiority over benchmark methods. This study provides theoretical support for the design, analysis, and control of under-constrained four-cable-driven parallel mechanisms.
- 12 January 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (2) , 782
Open AccessKinematic Solving and Stable Workspace Analysis of a Spatial Under-Constrained Cable-Driven Parallel Mechanism
This study systematically investigates the kinematic characteristics and static stability of a spatial under-constrained four-cable-driven parallel mechanism, specifically designed for supporting aircraft models in wind tunnel tests. Addressing the inherent strong coupling between kinematics and statics in such systems, an integrated solution framework is proposed. Firstly, a hybrid intelligent algorithm integrating genetic algorithm, chaos optimization, and particle swarm optimization is introduced to efficiently solve the direct and inverse geometric-statics problems, ensuring the identification of physically feasible equilibrium configurations under constraints such as cable tension limits and mechanical interference. Subsequently, a stability evaluation method based on the eigenvalue analysis of the system’s total stiffness matrix is employed, establishing a criterion (minimum eigenvalue λmin > 0) to identify statically stable equilibrium points. Finally, the static feasible workspace and the static stable workspace are systematically analyzed and quantified, providing practical operational limits for mechanism design and trajectory planning. The effectiveness of the proposed solution framework is validated through numerical computations, simulations, and experimental tests, demonstrating its superiority over benchmark methods. This study provides theoretical support for the design, analysis, and control of under-constrained four-cable-driven parallel mechanisms.
- 1 December 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (12)
Multiphase fluid–structure interaction and shock response of a segmented vehicle during high-speed oblique water entry
The high-speed oblique water entry of a segmented vehicle presents a complex multiphase fluid–structure interaction (FSI) problem, characterized by the evolution of the vapor–liquid cavity and the transient impact loads transmission. This study constructs a high-fidelity numerical model that integrates a multiphase flow solver with a FSI solver to investigate the underlying fluid physics and shock response during initial water entry for a segmented vehicle connected by bolts. The effects of key parameters such as entry velocity and angle on the spatiotemporal evolution of cavity, impact loads transmission, and shock response spectrum (SRS) are systematically investigated. Results show that multiphase FSI during cavity evolution notably amplifies high-frequency fluctuations in acceleration and induces asymmetry stress wave propagation. Segments with longer propagation distances exhibit higher peak axial forces, while connection interfaces experience negative normal contact forces and lateral contact moments. SRS analysis reveals resonant amplification peaks at 600 and 1500 Hz across the segments, with amplitudes reaching 100 g, and higher peaks at the monitoring points. Stress concentration and wave asymmetry generate elevated local stresses at connections and bolts, necessitating protective measures targeting segment-specific load peaks, critical frequency bands, and interface/bolt reinforcement. This study provides an effective multiphase FSI simulation framework and insights into the flow and shock characteristics of a segmented vehicle during high-speed water entry.
- 1 December 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (12)
Multiphase fluid–structure interaction and shock response of a segmented vehicle during high-speed oblique water entry
The high-speed oblique water entry of a segmented vehicle presents a complex multiphase fluid–structure interaction (FSI) problem, characterized by the evolution of the vapor–liquid cavity and the transient impact loads transmission. This study constructs a high-fidelity numerical model that integrates a multiphase flow solver with a FSI solver to investigate the underlying fluid physics and shock response during initial water entry for a segmented vehicle connected by bolts. The effects of key parameters such as entry velocity and angle on the spatiotemporal evolution of cavity, impact loads transmission, and shock response spectrum (SRS) are systematically investigated. Results show that multiphase FSI during cavity evolution notably amplifies high-frequency fluctuations in acceleration and induces asymmetry stress wave propagation. Segments with longer propagation distances exhibit higher peak axial forces, while connection interfaces experience negative normal contact forces and lateral contact moments. SRS analysis reveals resonant amplification peaks at 600 and 1500 Hz across the segments, with amplitudes reaching 100 g, and higher peaks at the monitoring points. Stress concentration and wave asymmetry generate elevated local stresses at connections and bolts, necessitating protective measures targeting segment-specific load peaks, critical frequency bands, and interface/bolt reinforcement. This study provides an effective multiphase FSI simulation framework and insights into the flow and shock characteristics of a segmented vehicle during high-speed water entry.
- 25 September 2024
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
- Vol. 239 (2) , 167-179
Complex motion design and control of aircraft model suspended with cable-driven parallel robot at high AoAs
Modern advanced fighters are characterized by the post-stall maneuverability with multi-degree-of-freedom (M-DOF) at high angles of attack (AoAs), which is generally difficult to simulate with the traditional sting suspension method in wind tunnel due to its limited M-DOF capability and dynamics. This paper studies the complex motion control of an aircraft model suspended with a novel cable-driven parallel robot (CDPR) to reappear some typical agile maneuvers with high AOAs and large amplitudes. The tasks include modeling the unsteady aerodynamics, designing the desired motion command, and developing the robust control law. Firstly, the kinematic and dynamic equations of CDPR are given, and the state-space representation of aerodynamic forces and moments for unsteady aircraft motion is established. Subsequently, an angular motion involving rolling around the velocity vector is proposed, and a typical M-DOF motion trajectory is also designed. To deal with modeling uncertainties and external disturbances, a robust feedback controller is constructed by integrating the computed-torque control law with extended state observer (ESO), and its stability is analyzed using the Lyapunov function. ADAMS simulations and numerical investigations conducted on the CDPR validate the effectiveness of the proposed methods and controller.
- 25 September 2024
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
- Vol. 239 (2) , 167-179
Complex motion design and control of aircraft model suspended with cable-driven parallel robot at high AoAs
Modern advanced fighters are characterized by the post-stall maneuverability with multi-degree-of-freedom (M-DOF) at high angles of attack (AoAs), which is generally difficult to simulate with the traditional sting suspension method in wind tunnel due to its limited M-DOF capability and dynamics. This paper studies the complex motion control of an aircraft model suspended with a novel cable-driven parallel robot (CDPR) to reappear some typical agile maneuvers with high AOAs and large amplitudes. The tasks include modeling the unsteady aerodynamics, designing the desired motion command, and developing the robust control law. Firstly, the kinematic and dynamic equations of CDPR are given, and the state-space representation of aerodynamic forces and moments for unsteady aircraft motion is established. Subsequently, an angular motion involving rolling around the velocity vector is proposed, and a typical M-DOF motion trajectory is also designed. To deal with modeling uncertainties and external disturbances, a robust feedback controller is constructed by integrating the computed-torque control law with extended state observer (ESO), and its stability is analyzed using the Lyapunov function. ADAMS simulations and numerical investigations conducted on the CDPR validate the effectiveness of the proposed methods and controller.
- Open Access
A Weighted Feature Fusion Model for Unsteady Aerodynamic Modeling at High Angles of Attack
Unsteady aerodynamic prediction at high angles of attack is of great importance to the design and development of advanced fighters. In this paper, a weighted feature fusion model (WFFM) that combines the state-space model and neural networks is proposed to build an unsteady aerodynamic model for the precise simulation and control of post-stall maneuvers. In the proposed model, the influences of the physical model on neural networks are considered and adjusted by introducing a standardization layer and a new weighting method. A long short-term memory (LSTM) network is used to fuse two mappings: one from flight states to aerodynamic loads, and the other from low-fidelity data to high-fidelity data. Data from wind tunnel oscillation experiments at high angles of attack using a new kind of wire-driven parallel robot and the traditional tail support are used for verifying the proposed aerodynamic model. The output of the WFFM is also compared with predictions from other models, such as the state-space model, single LSTM model, and feature fusion model not including a feature weighting layer. Results demonstrate improved accuracy of the proposed model in the interpolation and extrapolation tests. Furthermore, the WFFM is applied to the flight simulation of F-16 with different control inputs. Compared with conventional models, the WFFM shows improved accuracy and better generalization capability.
Open AccessA Weighted Feature Fusion Model for Unsteady Aerodynamic Modeling at High Angles of Attack
Unsteady aerodynamic prediction at high angles of attack is of great importance to the design and development of advanced fighters. In this paper, a weighted feature fusion model (WFFM) that combines the state-space model and neural networks is proposed to build an unsteady aerodynamic model for the precise simulation and control of post-stall maneuvers. In the proposed model, the influences of the physical model on neural networks are considered and adjusted by introducing a standardization layer and a new weighting method. A long short-term memory (LSTM) network is used to fuse two mappings: one from flight states to aerodynamic loads, and the other from low-fidelity data to high-fidelity data. Data from wind tunnel oscillation experiments at high angles of attack using a new kind of wire-driven parallel robot and the traditional tail support are used for verifying the proposed aerodynamic model. The output of the WFFM is also compared with predictions from other models, such as the state-space model, single LSTM model, and feature fusion model not including a feature weighting layer. Results demonstrate improved accuracy of the proposed model in the interpolation and extrapolation tests. Furthermore, the WFFM is applied to the flight simulation of F-16 with different control inputs. Compared with conventional models, the WFFM shows improved accuracy and better generalization capability.
- 21 May 2023
- Published by American Institute of Aeronautics and Astronautics (AIAA) in Journal of Aircraft
- Vol. 60 (6) , 1-7
Optimal Design and Verifications of Cable-Suspension Mechanism for High-Angle-of-Attack Unsteady Tests
- 21 May 2023
- Published by American Institute of Aeronautics and Astronautics (AIAA) in Journal of Aircraft
- Vol. 60 (6) , 1-7
Optimal Design and Verifications of Cable-Suspension Mechanism for High-Angle-of-Attack Unsteady Tests