Xue Liu

The liquefaction of hydrogen is considered to be a crucial process in the large-scale utilization of hydrogen energy. In hydrogen liquefaction, hydrogen turbo-expander is a key refrigerating machine for high liquefaction efficiency. Performance of the turbo-expander is directly affected by the hydrogen gas bearings. To obtain a deep understanding of the performance characteristics of hydrogen gas bearings, the static and dynamic characteristics of herringbone grooved journal bearings under hydrogen and other lubricating gases were numerically calculated and compared. The bearing load capacity and critical mass of hydrogen gas bearings were slightly lower than those of helium-, air- and nitrogen-lubricated bearings. To improve the performance of the hydrogen gas bearings used in high-speed turbo-machinery, the influence of working conditions was analyzed. It is found that the load capacity of hydrogen gas bearings can be improved by increasing the ambient pressure, reducing the gas film clearance, and raising the bearing eccentricity ratio. Meanwhile, the critical mass increases, and the bearing dynamic stability is enhanced.

Frost usually grows on the cooling surface of heat transfer equipment, which often operates under different working pressures. In such conditions, one of the fundamental influencing factors of frosting, the diffusion coefficient of water vapor around the cooling surface, is different from that in the normal atmosphere pressure. In order to investigate the pressure effect on frosting, a test rig for frosting visualization is designed. The role of working pressure around the cooling surface on the frost crystal morphologies and frost layer characteristics is evaluated under different air parameters and temperatures of cooling surface. The vertical growth and lateral distribution of frost crystals are strongly related to working pressure around the cooling surface. More frost crystal morphologies and faster growth rate of frost layer are presented at a lower pressure. The frost thickness, frost accumulation and density reduce with higher pressure. The dimensionless correlation of frost thickness is proposed considering working pressure around the cooling surface, humid air parameters, and temperature of cooling surface.