Jaime Gui
Research Subjects
Research Interests
Jaime Gui has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Jaume Anguera
Universitat Ramon Llull
2 shared publications - Aurora Andújar
R&D Department, Ignion, 08190 Barcelona, Spain
1 shared publication - Aurora Andújar
R&D Department, Ignion, 08190 Barcelona, Spain
1 shared publication - Jaap Groot
R&D Department, Ignion, 08190 Barcelona, Spain
1 shared publication - Joan Lluis Pijoan
Universitat Ramon Llull
1 shared publication - José Luis Leiva
R&D Department, Ignion, 08190 Barcelona, Spain
1 shared publication
Latest Publications
- Open Access
Linearly Polarized Antenna Boosters versus Circularly Polarized Microstrip Patch Antennas for GPS Reception in IoT Devices
GPS has become an attractive feature for geolocalization enabling asset tracking IoT devices. GPS satellite antennas radiate RHCP (right-hand circularly polarized) electromagnetic waves; thus, the typical antenna at the receiver is also RHCP. However, when the orientation of the receiving device is random, linear polarization antennas operate better in terms of TTFF (time to first fix). Through field measurements (urban and field) and considering different positions of the device in a vehicle, an RHCP microstrip patch antenna and a linear non-resonant antenna element called an antenna booster were compared. TTFF averaged for several positions was 7 s better for the linearly polarized antenna booster than for the microstrip RHCP patch antenna. The results demonstrate that the behavior of the linear polarization antenna booster technology is more robust in terms of TTFF to the arbitrary position of the IoT device while keeping a small size and simplicity.sdf
Open AccessLinearly Polarized Antenna Boosters versus Circularly Polarized Microstrip Patch Antennas for GPS Reception in IoT Devices
GPS has become an attractive feature for geolocalization enabling asset tracking IoT devices. GPS satellite antennas radiate RHCP (right-hand circularly polarized) electromagnetic waves; thus, the typical antenna at the receiver is also RHCP. However, when the orientation of the receiving device is random, linear polarization antennas operate better in terms of TTFF (time to first fix). Through field measurements (urban and field) and considering different positions of the device in a vehicle, an RHCP microstrip patch antenna and a linear non-resonant antenna element called an antenna booster were compared. TTFF averaged for several positions was 7 s better for the linearly polarized antenna booster than for the microstrip RHCP patch antenna. The results demonstrate that the behavior of the linear polarization antenna booster technology is more robust in terms of TTFF to the arbitrary position of the IoT device while keeping a small size and simplicity.sdf
- Open Access
- 17 April 2022
- Published by MDPI AG in Electronics
- Vol. 11 (8) , 1267
On the Reuse of a Matching Network for IoT Devices Operating at 900 MHz Embedding Antenna Boosters
The Internet of Things (IoT) is evolving rapidly, enabling more new applications than ever before. Some radio systems in the IoT space used to connect things with things operate at the 863–928 MHz frequency band (e.g., LoRa, ISM). IoT wireless devices at 900 MHz need an efficient antenna to send data into the cloud, and ensure range and long battery life. Moreover, the antenna should be easy to use across different device sizes. In this regard, antenna booster technology is proposed, which relies on a tiny element called an antenna booster, able to excite radiation currents on the ground plane of the IoT device. The antenna booster in this paper is only 12 mm × 3 mm × 2.4 mm (height), representing only ~λ/30 at 863 MHz. Such an antenna booster is reactive across the 863–928 MHz frequency range and, thus, a matching network is needed. The paper first proposes a matching network on a 120 mm × 60 mm ground plane. Afterward, an analysis is carried out to find the set of different ground plane sizes where the same matching network as the one used for the 120 mm × 60 mm ground plane can be reused, ensuring an S11 < −6 dB. The goal is to find a map representing a cluster of ground planes where the same antenna system can be used (the same antenna booster and the same matching network) to simplify the design of IoT devices embedding antenna boosters. The analysis is addressed using MoM (Method of Moments) electromagnetic software (IE3D) and validated through measurements. Results indicate that a broad set of device sizes can reuse the same matching network with the same antenna booster, thus, simplifying and accelerating the design of IoT devices since no adjustment is needed on the antenna system.
- 17 April 2022
- Published by MDPI AG in Electronics
- Vol. 11 (8) , 1267
Open AccessOn the Reuse of a Matching Network for IoT Devices Operating at 900 MHz Embedding Antenna Boosters
The Internet of Things (IoT) is evolving rapidly, enabling more new applications than ever before. Some radio systems in the IoT space used to connect things with things operate at the 863–928 MHz frequency band (e.g., LoRa, ISM). IoT wireless devices at 900 MHz need an efficient antenna to send data into the cloud, and ensure range and long battery life. Moreover, the antenna should be easy to use across different device sizes. In this regard, antenna booster technology is proposed, which relies on a tiny element called an antenna booster, able to excite radiation currents on the ground plane of the IoT device. The antenna booster in this paper is only 12 mm × 3 mm × 2.4 mm (height), representing only ~λ/30 at 863 MHz. Such an antenna booster is reactive across the 863–928 MHz frequency range and, thus, a matching network is needed. The paper first proposes a matching network on a 120 mm × 60 mm ground plane. Afterward, an analysis is carried out to find the set of different ground plane sizes where the same matching network as the one used for the 120 mm × 60 mm ground plane can be reused, ensuring an S11 < −6 dB. The goal is to find a map representing a cluster of ground planes where the same antenna system can be used (the same antenna booster and the same matching network) to simplify the design of IoT devices embedding antenna boosters. The analysis is addressed using MoM (Method of Moments) electromagnetic software (IE3D) and validated through measurements. Results indicate that a broad set of device sizes can reuse the same matching network with the same antenna booster, thus, simplifying and accelerating the design of IoT devices since no adjustment is needed on the antenna system.