Jiayue Zhou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Jiayue Zhou has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Xi Xiao
Tsinghua University
5 shared publications - Xuanrui Huang
Department of Electrical Engineering, Tsinghua University, Beijing, China
3 shared publications - Zechuan Lin
Maynooth University
3 shared publications - Kemeng Chen
Tsinghua University
2 shared publications Xi Xiao
2 shared publications- Zhe Song
School of Mechanical and Electrical Engineering, China University of Mining and Technology-Beijing, Beijing 100083, China
2 shared publications
Latest Publications
- 23 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 72 (12) , 12544-12555
Eccentricity Diagnosis of Electric Machines Using Harmonic Ratio-Based Indices From Resolvers
Timely diagnosis of rotor eccentricity is essential for the safe, stable, and high-performance operation of electric machines. This article introduces novel indices for eccentricity detection, based on the output voltage signals of variable-reluctance resolver. The method utilizes the amplitude ratio between the dominant harmonics under healthy conditions and the additional dominant harmonics introduced under eccentric conditions as the diagnostic index. These indices exhibit a direct proportionality to the eccentricity level and account for various excitation modes, pole configurations, and eccentricity types. The proposed method is noninvasive, highly accurate, and suitable for both offline and real-time online applications. Through analytical modeling, finite element analysis, and experimental validation, the effectiveness of the approach for real-time eccentricity monitoring is demonstrated.
- 23 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 72 (12) , 12544-12555
Eccentricity Diagnosis of Electric Machines Using Harmonic Ratio-Based Indices From Resolvers
Timely diagnosis of rotor eccentricity is essential for the safe, stable, and high-performance operation of electric machines. This article introduces novel indices for eccentricity detection, based on the output voltage signals of variable-reluctance resolver. The method utilizes the amplitude ratio between the dominant harmonics under healthy conditions and the additional dominant harmonics introduced under eccentric conditions as the diagnostic index. These indices exhibit a direct proportionality to the eccentricity level and account for various excitation modes, pole configurations, and eccentricity types. The proposed method is noninvasive, highly accurate, and suitable for both offline and real-time online applications. Through analytical modeling, finite element analysis, and experimental validation, the effectiveness of the approach for real-time eccentricity monitoring is demonstrated.
- 21 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 72 (3) , 2392-2401
Prediction and Analysis of PWM-Induced Current Ripple of PMSM at Low Switching-to-Fundamental Frequency Ratios
This article addresses the challenge of current ripple in permanent magnet synchronous machines (PMSMs), predominantly caused by the pulse width modulation (PWM) effect of voltage source inverter. This phenomenon is especially prominent at low switching-to-fundamental frequency ratios (SFFRs), leading to significant noises and decreased efficiency. This article proposes a flux-linkage-based discrete method to accurately and fastly predict PWM-induced current ripple in PMSMs. Ripple patterns and various influencing factors are studied in-depth based on the proposed method. Experimental studies to validate the proposed prediction method are presented, confirming its effectiveness, especially in scenarios where traditional methods fall short due to low SFFRs.
- 21 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 72 (3) , 2392-2401
Prediction and Analysis of PWM-Induced Current Ripple of PMSM at Low Switching-to-Fundamental Frequency Ratios
This article addresses the challenge of current ripple in permanent magnet synchronous machines (PMSMs), predominantly caused by the pulse width modulation (PWM) effect of voltage source inverter. This phenomenon is especially prominent at low switching-to-fundamental frequency ratios (SFFRs), leading to significant noises and decreased efficiency. This article proposes a flux-linkage-based discrete method to accurately and fastly predict PWM-induced current ripple in PMSMs. Ripple patterns and various influencing factors are studied in-depth based on the proposed method. Experimental studies to validate the proposed prediction method are presented, confirming its effectiveness, especially in scenarios where traditional methods fall short due to low SFFRs.
- 17 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 72 (2) , 1561-1570
Improving Wave-to-Wire Efficiency of Direct-Drive Wave Energy Converters With Loss-Aware Model Predictive Control and Variable DC Voltage Control
Existing advanced controls for direct-drive wave energy converters (DDWECs) have primarily focused on the maximization of mechanical energy capture, rather than the net electricity generation. In this article, a detailed electrical loss analysis is carried out theoretically and experimentally, and the results indicate that the wave-to-wire (W2W) efficiency will be compromised if electrical losses are neglected in controller design. Accordingly, a novel control strategy is proposed, which consists of a) a loss-aware model predictive control (MPC) that balances between maximization of mechanical energy and efficient mechanic-to-electric conversion and b) a variable dc voltage control that mitigates the switching and pulse-width-modulation (PWM)-induced losses. A full DDWEC testing platform comprising a WEC prototype and a power-electronic converter with an embedded controller is established, and the improvement of power generation, by means of incorporating electrical losses of the entire W2W chain in control, is validated through wave tank testing for the first time. In particular, the electrical losses have a significant impact on the electricity output under irregular waves, while the proposed controller can achieve an electricity output increase of over 150%.
- 17 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 72 (2) , 1561-1570
Improving Wave-to-Wire Efficiency of Direct-Drive Wave Energy Converters With Loss-Aware Model Predictive Control and Variable DC Voltage Control
Existing advanced controls for direct-drive wave energy converters (DDWECs) have primarily focused on the maximization of mechanical energy capture, rather than the net electricity generation. In this article, a detailed electrical loss analysis is carried out theoretically and experimentally, and the results indicate that the wave-to-wire (W2W) efficiency will be compromised if electrical losses are neglected in controller design. Accordingly, a novel control strategy is proposed, which consists of a) a loss-aware model predictive control (MPC) that balances between maximization of mechanical energy and efficient mechanic-to-electric conversion and b) a variable dc voltage control that mitigates the switching and pulse-width-modulation (PWM)-induced losses. A full DDWEC testing platform comprising a WEC prototype and a power-electronic converter with an embedded controller is established, and the improvement of power generation, by means of incorporating electrical losses of the entire W2W chain in control, is validated through wave tank testing for the first time. In particular, the electrical losses have a significant impact on the electricity output under irregular waves, while the proposed controller can achieve an electricity output increase of over 150%.
- 30 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Sustainable Energy
- Vol. 15 (4) , 2209-2218
On Loss-Aware Optimal Control of Wave Energy Converters With Electrical Power Take-Offs
Incorporating the non-ideal power take-off (PTO) efficiency of wave energy converters (WECs) into energy-maximizing control is crucial for achieving optimal electrical power generation. The majority of previous loss-aware controllers are based on a simplified power-coefficient (PC) model or only consider the copper loss, which remain insufficient to describe a real electrical PTO. In this article, a high-fidelity loss model, encompassing different loss components of the PTO (a generator and a power converter), is developed, and a number of loss-aware model predictive control (MPC) options are derived and compared in a realistic case study. The results highlight the importance of using an appropriate loss model, rather than a PC model, both for power evaluation and for control, and it is shown that a quadratic loss model employed in MPC is effective in approximating the true loss function, so that near-optimal power production can be achieved with fast computation.
- 30 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Sustainable Energy
- Vol. 15 (4) , 2209-2218
On Loss-Aware Optimal Control of Wave Energy Converters With Electrical Power Take-Offs
Incorporating the non-ideal power take-off (PTO) efficiency of wave energy converters (WECs) into energy-maximizing control is crucial for achieving optimal electrical power generation. The majority of previous loss-aware controllers are based on a simplified power-coefficient (PC) model or only consider the copper loss, which remain insufficient to describe a real electrical PTO. In this article, a high-fidelity loss model, encompassing different loss components of the PTO (a generator and a power converter), is developed, and a number of loss-aware model predictive control (MPC) options are derived and compared in a realistic case study. The results highlight the importance of using an appropriate loss model, rather than a PC model, both for power evaluation and for control, and it is shown that a quadratic loss model employed in MPC is effective in approximating the true loss function, so that near-optimal power production can be achieved with fast computation.
- 17 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (5) , 4958-4962
A Hybrid-Excited Resolver for High-Speed Operation
Accurate rotor position detection is essential for high-speed machine control systems, yet stable rotor position sensors for operations exceeding 30 krpm are lacking. While resolvers are renowned for their structure robustness in high-speed applications, the necessity for high-frequency enveloping during decoding leads to significant measurement errors as speeds increase, thereby restricting their applications in high-speed scenarios. This letter introduces a novel hybrid-excited resolver scheme designed to generate easily decodable signals for high-speed applications. The scheme employs conventional high-frequency voltage excitation at low speeds, and shifts to adjustable direct current excitation beyond a critical speed threshold, during which the resolver produces orthogonal output signals in the form of back-EMF with a consistent amplitude. By eliminating the need for high-frequency signal enveloping, this method enables the resolver to operate at ultra-high speeds without requiring complex structural modifications. Both simulations and experiments corroborate the effectiveness of this approach, validating its potential for practical applications.
- 17 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (5) , 4958-4962
A Hybrid-Excited Resolver for High-Speed Operation
Accurate rotor position detection is essential for high-speed machine control systems, yet stable rotor position sensors for operations exceeding 30 krpm are lacking. While resolvers are renowned for their structure robustness in high-speed applications, the necessity for high-frequency enveloping during decoding leads to significant measurement errors as speeds increase, thereby restricting their applications in high-speed scenarios. This letter introduces a novel hybrid-excited resolver scheme designed to generate easily decodable signals for high-speed applications. The scheme employs conventional high-frequency voltage excitation at low speeds, and shifts to adjustable direct current excitation beyond a critical speed threshold, during which the resolver produces orthogonal output signals in the form of back-EMF with a consistent amplitude. By eliminating the need for high-frequency signal enveloping, this method enables the resolver to operate at ultra-high speeds without requiring complex structural modifications. Both simulations and experiments corroborate the effectiveness of this approach, validating its potential for practical applications.
- Open Access
- 26 April 2023
- Published by Elsevier in Energy Reports
- Vol. 9, 199-206
Combined methods for torque variation reduction of high-speed FSPM
- 26 April 2023
- Published by Elsevier in Energy Reports
- Vol. 9, 199-206
Open AccessCombined methods for torque variation reduction of high-speed FSPM