GMGang Meng

Gang Meng

*This is an algorithmically generated author record based on publicly available information.

Gang Meng has a total of 13 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    The Influence of Overlying High-Speed Rail Dynamic Loads on the Stability of Shield Tunnel Faces During Excavation

    by Yongkang Pang, Hang Lin, Ping Cao, Gang Meng

    This study investigates the stability of multilayer shield tunnels beneath high-speed railway bases, with a particular focus on the influence of dynamic loads induced by high-speed rail vibrations and shield thrust. A self-designed scale test apparatus was employed to simulate the effects of these dynamic loads on tunnel soil stability, face integrity, formation stress, deformation, and settlement. The experimental setup was specifically designed to accurately replicate the deformation characteristics of the tunnel face and surrounding strata under the combined influence of shield tunneling and high-speed rail loads. The reliability of the experimental results was validated through comparison with numerical simulations performed using FLAC3D software. The study underscores the effectiveness of integrating physical model tests with numerical simulations to predict the failure characteristics and ultimate support forces of tunnel faces under dynamic loading conditions. The findings provide novel insights into the deformation and failure mechanisms of tunnel faces during shield excavation, particularly under the influence of high-speed rail loads. This research establishes a robust methodological framework for assessing tunnel face stability and offers valuable guidance for the design and construction of shield tunnels in analogous geological and operational contexts.


  • Open Access

    An Initial Damage Model of Rock Materials under Uniaxial Compression Considering Loading Rates

    by Gang Meng, Zhizhen Liu, Ping Cao, Ziyang Zhang, Zhi Fan, Hang Lin, Huijuan Deng

    Existing rock material damage models always ignore the initial damage characteristics of rock materials, and the actual rock materials have initial damage characteristics. To consider the rock’s initial damage characteristics, a series of compression tests for yellow sandstone was carried out. First, the acoustic emission characteristics and damage model of yellow sandstone, considering the loading rates, were analyzed. Second, an initial damage model, which can better describe the initial damage characteristics of yellow sandstone materials, is presented. The research results show that the strength and elastic modulus of yellow sandstone depends on the loading rate, and increases as the loading rate increases.


  • Open Access

    Numerical Analysis of Ground Settlement Patterns Resulting from Tunnel Excavation in Composite Strata

    by Huijuan Deng, Ping Cao, Yinzhu Liu, Zhizhen Liu, Gang Meng, Zhi Fan, Weiping Xie

    Cross-river twin tunnels are prone to deformation and uneven settlement of the surrounding soil due to the complexity of the strata crossed, which has a negative impact on the tunnel structure. A numerical calculation model was established using the COMSOL Multiphysics to study the effects of twin tunnel excavation in composite strata on the ground settlement and the ground settlement pattern. The results indicated that after the construction of the twin tunnels is completed, the ground settlement above the first tunnel is slightly larger than the ground settlement above the second tunnel. The further the spacing between the two tunnels before and after excavation, the smaller the amount of ground settlement and the impact on the surrounding soil. The ground settlement value increases with the increase in burial depth, and the ground settlement curve gradually changes from a W-shaped curve to a V-shaped curve. As the distance between the two tunnels increases, the maximum settlement value of the settlement curve gradually decreases, and the ground lateral settlement curve changes from V-shaped to W-shaped. The higher the water level on the riverbed side, the greater the settlement value of the ground.


  • Open Access

    Mechanical Behaviour of Anchored Rock Containing Weak Interlayer under Uniaxial Compression: Laboratory Test and Coupled DEM–FEM Simulation

    by Xinyang Luo, Ping Cao, Taoying Liu, Qingxiong Zhao, Gang Meng, Zhi Fan, Weiping Xie

    The reason for instability in a rock mass with a weak interlayer is not only the sliding failure of the rock interlayer structural plane but also the tip crack propagation caused by the stress concentration at the tip of the interlayer. In this study, a uniaxial compression test of an anchored rock mass with a weak interlayer was carried out to determine the influence of the anchorage on the failure pattern and the strength of samples with different interlayer dip angles. In addition, the coupled DEM–FEM numerical simulation method was used to study the internal stress evolution of the sample and the stress distribution of the anchor under the anchorage effect. The results showed that the anchorage effect on reinforcement and strength enhancement was greatest for the sample with an interlayer dip angle of 30°. Under the anchorage effect, crack initiation was limited and there was more shear failure in the samples. The reinforcement range of the anchorage effect for anchors with restrained ends was larger than for anchors with free ends. When the rock–anchor interface was unbonded, the effect of the free-ends anchor reflected the residual friction, but the restrained-ends anchor still worked by limiting the lateral expansion of the rocks. The stress values and deformation of the anchors decreased gradually with an increase in dip angle.