Nafees Ali
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Nafees Ali has a total of 51 co-authors. Here are the top co-authors by number of shared publications:
- Aqsa Anees
Institute of International Rivers and Eco-security, Yunnan University, Kunming, China
3 shared publications - Jian Chen
State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences, Wuhan, China
3 shared publications - Muhammad Afaq Hussain
School of Computer Science, China University of Geosciences, Wuhan 430074, China
3 shared publications - Umar Ashraf
Institute for Ecological Research and Pollution Control of Plateau Lakes, School of Ecology and Environmental Science, Yunnan University, Kunming, China
3 shared publications - Wakeel Hussain
China University of Geosciences
3 shared publications - Xiaodong Fu
State Key Laboratory of Geomechanics and Geotechnical Engineering Safety, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences, Wuhan 430071, China
3 shared publications
Latest Publications
- Open Access
- 17 October 2025
- Published by MDPI AG in Remote Sensing
- Vol. 17 (20) , 3464
Hybrid Machine Learning and SBAS-InSAR Integration for Landslide Susceptibility Mapping Along the Balakot–Naran Route, Pakistan
Natural hazards such as landslides are among the most harmful and recurring hazards to infrastructure, communities, and the environment around the world. In Pakistan, the Balakot Valley is prone to severe landslides, especially along the Balakot–Naran route, which is a major economic and tourist route. This route requires accurate landslide susceptibility mapping (LSM) to mitigate landslide risk. However, existing approaches mainly rely on statistical methods, which do not sufficiently address the complexity of spatial patterns and characteristics between landslide conditioning factors (LCFs) and their prevalence. In this study, small baseline subset interferometric synthetic aperture radar (SBAS-InSAR) measurements of slope deformation (Vslope) were employed to update the landslide inventory. Following this update, an LSM was generated to examine the causal variables that are associated with landslide occurrences. Several machine learning (ML) classifiers, which include Adaptive Boosting (AdaBoost), Light Gradient Boosting (LightGBM), Extreme Gradient Boosting (XGBoost), and a hybrid (ADA + LGBM + XGB), are utilized for mapping landslide susceptibility. A total of 14 LCFs were considered, with 70% of the dataset being trained and 30% tested. To evaluate the significance of these variables, Recursive Feature Elimination (RFE) and the Shapley Additive Explanations (SHAP) were used. Results indicate that the hybrid model exhibits superior efficiency in the area under the curve (AUC) (88.00%), precision (84.69%), accuracy (84.52%), F1-score (84.69%), and recall (84.70%). The hybrid classifier, when combined with InSAR predictions, generates an improved LSM for the route. In conclusion, the improved LSM can effectively identify areas that are prone to landslides along the Balakot–Naran route.
- 17 October 2025
- Published by MDPI AG in Remote Sensing
- Vol. 17 (20) , 3464
Open AccessHybrid Machine Learning and SBAS-InSAR Integration for Landslide Susceptibility Mapping Along the Balakot–Naran Route, Pakistan
Natural hazards such as landslides are among the most harmful and recurring hazards to infrastructure, communities, and the environment around the world. In Pakistan, the Balakot Valley is prone to severe landslides, especially along the Balakot–Naran route, which is a major economic and tourist route. This route requires accurate landslide susceptibility mapping (LSM) to mitigate landslide risk. However, existing approaches mainly rely on statistical methods, which do not sufficiently address the complexity of spatial patterns and characteristics between landslide conditioning factors (LCFs) and their prevalence. In this study, small baseline subset interferometric synthetic aperture radar (SBAS-InSAR) measurements of slope deformation (Vslope) were employed to update the landslide inventory. Following this update, an LSM was generated to examine the causal variables that are associated with landslide occurrences. Several machine learning (ML) classifiers, which include Adaptive Boosting (AdaBoost), Light Gradient Boosting (LightGBM), Extreme Gradient Boosting (XGBoost), and a hybrid (ADA + LGBM + XGB), are utilized for mapping landslide susceptibility. A total of 14 LCFs were considered, with 70% of the dataset being trained and 30% tested. To evaluate the significance of these variables, Recursive Feature Elimination (RFE) and the Shapley Additive Explanations (SHAP) were used. Results indicate that the hybrid model exhibits superior efficiency in the area under the curve (AUC) (88.00%), precision (84.69%), accuracy (84.52%), F1-score (84.69%), and recall (84.70%). The hybrid classifier, when combined with InSAR predictions, generates an improved LSM for the route. In conclusion, the improved LSM can effectively identify areas that are prone to landslides along the Balakot–Naran route.
- 6 May 2025
- Published by Springer Nature in Carbonates and Evaporites
- Vol. 40 (2) , 1-20
Integrating geophysical logs for reservoir assessment of paleocene reservoir, Manzalai gas field, Kohat Basin, Pakistan
- 6 May 2025
- Published by Springer Nature in Carbonates and Evaporites
- Vol. 40 (2) , 1-20
Integrating geophysical logs for reservoir assessment of paleocene reservoir, Manzalai gas field, Kohat Basin, Pakistan
- Open Access
Advancing Reservoir Evaluation: Machine Learning Approaches for Predicting Porosity Curves
Porosity assessment is a vital component for reservoir evaluation in the oil and gas sector, and with technological advancement, reliance on conventional methods has decreased. In this regard, this research aims to reduce reliance on well logging, purposing successive machine learning (ML) techniques for precise porosity measurement. So, this research examines the prediction of the porosity curves in the Sui main and Sui upper limestone reservoir, utilizing ML approaches such as an artificial neural networks (ANN) and fuzzy logic (FL). Thus, the input dataset of this research includes gamma ray (GR), neutron porosity (NPHI), density (RHOB), and sonic (DT) logs amongst five drilled wells located in the Qadirpur gas field. The ANN model was trained using the backpropagation algorithm. For the FL model, ten bins were utilized, and Gaussian-shaped membership functions were chosen for ideal correspondence with the geophysical log dataset. The closeness of fit (C-fit) values for the ANN ranged from 91% to 98%, while the FL model exhibited variability from 90% to 95% throughout the wells. In addition, a similar dataset was used to evaluate multiple linear regression (MLR) for comparative analysis. The ANN and FL models achieved robust performance as compared to MLR, with R2 values of 0.955 (FL) and 0.988 (ANN) compared to 0.94 (MLR). The outcomes indicate that FL and ANN exceed MLR in predicting the porosity curve. Moreover, the significant R2 values and lowest root mean square error (RMSE) values support the potency of these advanced approaches. This research emphasizes the authenticity of FL and ANN in predicting the porosity curve. Thus, these techniques not only enhance natural resource exploitation within the region but also hold broader potential for worldwide applications in reservoir assessment.
Open AccessAdvancing Reservoir Evaluation: Machine Learning Approaches for Predicting Porosity Curves
Porosity assessment is a vital component for reservoir evaluation in the oil and gas sector, and with technological advancement, reliance on conventional methods has decreased. In this regard, this research aims to reduce reliance on well logging, purposing successive machine learning (ML) techniques for precise porosity measurement. So, this research examines the prediction of the porosity curves in the Sui main and Sui upper limestone reservoir, utilizing ML approaches such as an artificial neural networks (ANN) and fuzzy logic (FL). Thus, the input dataset of this research includes gamma ray (GR), neutron porosity (NPHI), density (RHOB), and sonic (DT) logs amongst five drilled wells located in the Qadirpur gas field. The ANN model was trained using the backpropagation algorithm. For the FL model, ten bins were utilized, and Gaussian-shaped membership functions were chosen for ideal correspondence with the geophysical log dataset. The closeness of fit (C-fit) values for the ANN ranged from 91% to 98%, while the FL model exhibited variability from 90% to 95% throughout the wells. In addition, a similar dataset was used to evaluate multiple linear regression (MLR) for comparative analysis. The ANN and FL models achieved robust performance as compared to MLR, with R2 values of 0.955 (FL) and 0.988 (ANN) compared to 0.94 (MLR). The outcomes indicate that FL and ANN exceed MLR in predicting the porosity curve. Moreover, the significant R2 values and lowest root mean square error (RMSE) values support the potency of these advanced approaches. This research emphasizes the authenticity of FL and ANN in predicting the porosity curve. Thus, these techniques not only enhance natural resource exploitation within the region but also hold broader potential for worldwide applications in reservoir assessment.
- Top Cited PapersOpen Access
- 12 March 2024
- Published by MDPI AG in Remote Sensing
- Vol. 16 (6) , 988
Integrating Machine Learning Ensembles for Landslide Susceptibility Mapping in Northern Pakistan
Natural disasters, notably landslides, pose significant threats to communities and infrastructure. Landslide susceptibility mapping (LSM) has been globally deemed as an effective tool to mitigate such threats. In this regard, this study considers the northern region of Pakistan, which is primarily susceptible to landslides amid rugged topography, frequent seismic events, and seasonal rainfall, to carry out LSM. To achieve this goal, this study pioneered the fusion of baseline models (logistic regression (LR), K-nearest neighbors (KNN), and support vector machine (SVM)) with ensembled algorithms (Cascade Generalization (CG), random forest (RF), Light Gradient-Boosting Machine (LightGBM), AdaBoost, Dagging, and XGBoost). With a dataset comprising 228 landslide inventory maps, this study employed a random forest classifier and a correlation-based feature selection (CFS) approach to identify the twelve most significant parameters instigating landslides. The evaluated parameters included slope angle, elevation, aspect, geological features, and proximity to faults, roads, and streams, and slope was revealed as the primary factor influencing landslide distribution, followed by aspect and rainfall with a minute margin. The models, validated with an AUC of 0.784, ACC of 0.912, and K of 0.394 for logistic regression (LR), as well as an AUC of 0.907, ACC of 0.927, and K of 0.620 for XGBoost, highlight the practical effectiveness and potency of LSM. The results revealed the superior performance of LR among the baseline models and XGBoost among the ensembles, which contributed to the development of precise LSM for the study area. LSM may serve as a valuable tool for guiding precise risk-mitigation strategies and policies in geohazard-prone regions at national and global scales.
- 12 March 2024
- Published by MDPI AG in Remote Sensing
- Vol. 16 (6) , 988
Top Cited PapersOpen AccessIntegrating Machine Learning Ensembles for Landslide Susceptibility Mapping in Northern Pakistan
Natural disasters, notably landslides, pose significant threats to communities and infrastructure. Landslide susceptibility mapping (LSM) has been globally deemed as an effective tool to mitigate such threats. In this regard, this study considers the northern region of Pakistan, which is primarily susceptible to landslides amid rugged topography, frequent seismic events, and seasonal rainfall, to carry out LSM. To achieve this goal, this study pioneered the fusion of baseline models (logistic regression (LR), K-nearest neighbors (KNN), and support vector machine (SVM)) with ensembled algorithms (Cascade Generalization (CG), random forest (RF), Light Gradient-Boosting Machine (LightGBM), AdaBoost, Dagging, and XGBoost). With a dataset comprising 228 landslide inventory maps, this study employed a random forest classifier and a correlation-based feature selection (CFS) approach to identify the twelve most significant parameters instigating landslides. The evaluated parameters included slope angle, elevation, aspect, geological features, and proximity to faults, roads, and streams, and slope was revealed as the primary factor influencing landslide distribution, followed by aspect and rainfall with a minute margin. The models, validated with an AUC of 0.784, ACC of 0.912, and K of 0.394 for logistic regression (LR), as well as an AUC of 0.907, ACC of 0.927, and K of 0.620 for XGBoost, highlight the practical effectiveness and potency of LSM. The results revealed the superior performance of LR among the baseline models and XGBoost among the ensembles, which contributed to the development of precise LSM for the study area. LSM may serve as a valuable tool for guiding precise risk-mitigation strategies and policies in geohazard-prone regions at national and global scales.
- Open Access
- 3 August 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (15) , 11956
The Effect of Energy Consumption, Income, and Population Growth on CO2 Emissions: Evidence from NARDL and Machine Learning Models
With population and income growth, the need for energy has increased in developing and emerging economies, which has inevitably led to an increase in carbon dioxide emissions (CO2e). This paper investigates the impact of energy consumption on CO2e influenced by population growth, energy consumption per capita, and income. In particular, this paper investigates whether or not an increase in energy consumption, energy intensity, energy consumption per capita, population growth, and income impacts CO2e in China, India, and the USA. The study applied the non-linear Autoregressive distributed lag (NARDL) and machine learning techniques. We found a significant impact of energy consumption per capita on the CO2 emissions in China, India, and USA. Furthermore, the results revealed that, when income increased, CO2 emissions increased in India, but decreased in the USA. The results confirmed that population growth increases CO2 emissions only in India. The results revealed that a decrease in energy intensity significantly improves the environmental quality in China and India. Finally, we forecasted the CO2e trend from 2017 to 2025. The results revealed an upcoming increase in CO2e levels in China and India. Conversely, the forecasted results demonstrated a downward trend of CO2e emissions in the USA.
- 3 August 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (15) , 11956
Open AccessThe Effect of Energy Consumption, Income, and Population Growth on CO2 Emissions: Evidence from NARDL and Machine Learning Models
With population and income growth, the need for energy has increased in developing and emerging economies, which has inevitably led to an increase in carbon dioxide emissions (CO2e). This paper investigates the impact of energy consumption on CO2e influenced by population growth, energy consumption per capita, and income. In particular, this paper investigates whether or not an increase in energy consumption, energy intensity, energy consumption per capita, population growth, and income impacts CO2e in China, India, and the USA. The study applied the non-linear Autoregressive distributed lag (NARDL) and machine learning techniques. We found a significant impact of energy consumption per capita on the CO2 emissions in China, India, and USA. Furthermore, the results revealed that, when income increased, CO2 emissions increased in India, but decreased in the USA. The results confirmed that population growth increases CO2 emissions only in India. The results revealed that a decrease in energy intensity significantly improves the environmental quality in China and India. Finally, we forecasted the CO2e trend from 2017 to 2025. The results revealed an upcoming increase in CO2e levels in China and India. Conversely, the forecasted results demonstrated a downward trend of CO2e emissions in the USA.
- Open Access
Reservoir Quality Prediction of Gas-Bearing Carbonate Sediments in the Qadirpur Field: Insights from Advanced Machine Learning Approaches of SOM and Cluster Analysis
The detailed reservoir characterization was examined for the Central Indus Basin (CIB), Pakistan, across Qadirpur Field Eocene rock units. Various petrophysical parameters were analyzed with the integration of various cross-plots, complex water saturation, shale volume, effective porosity, total porosity, hydrocarbon saturation, neutron porosity and sonic concepts, gas effects, and lithology. In total, 8–14% of high effective porosity and 45–62% of hydrocarbon saturation are superbly found in the reservoirs of the Eocene. The Sui Upper Limestone is one of the poorest reservoirs among all these reservoirs. However, this reservoir has few intervals of rich hydrocarbons with highly effective porosity values. The shale volume ranges from 30 to 43%. The reservoir is filled with effective and total porosities along with secondary porosities. Fracture–vuggy, chalky, and intracrystalline reservoirs are the main contributors of porosity. The reservoirs produce hydrocarbon without water and gas-emitting carbonates with an irreducible water saturation rate of 38–55%. In order to evaluate lithotypes, including axial changes in reservoir characterization, self-organizing maps, isoparametersetric maps of the petrophysical parameters, and litho-saturation cross-plots were constructed. Estimating the petrophysical parameters of gas wells and understanding reservoir prospects were both feasible with the methods employed in this study, and could be applied in the Central Indus Basin and anywhere else with comparable basins.
Open AccessReservoir Quality Prediction of Gas-Bearing Carbonate Sediments in the Qadirpur Field: Insights from Advanced Machine Learning Approaches of SOM and Cluster Analysis
The detailed reservoir characterization was examined for the Central Indus Basin (CIB), Pakistan, across Qadirpur Field Eocene rock units. Various petrophysical parameters were analyzed with the integration of various cross-plots, complex water saturation, shale volume, effective porosity, total porosity, hydrocarbon saturation, neutron porosity and sonic concepts, gas effects, and lithology. In total, 8–14% of high effective porosity and 45–62% of hydrocarbon saturation are superbly found in the reservoirs of the Eocene. The Sui Upper Limestone is one of the poorest reservoirs among all these reservoirs. However, this reservoir has few intervals of rich hydrocarbons with highly effective porosity values. The shale volume ranges from 30 to 43%. The reservoir is filled with effective and total porosities along with secondary porosities. Fracture–vuggy, chalky, and intracrystalline reservoirs are the main contributors of porosity. The reservoirs produce hydrocarbon without water and gas-emitting carbonates with an irreducible water saturation rate of 38–55%. In order to evaluate lithotypes, including axial changes in reservoir characterization, self-organizing maps, isoparametersetric maps of the petrophysical parameters, and litho-saturation cross-plots were constructed. Estimating the petrophysical parameters of gas wells and understanding reservoir prospects were both feasible with the methods employed in this study, and could be applied in the Central Indus Basin and anywhere else with comparable basins.
- Open Access
- 13 November 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14 (22) , 5732
AQE-Net: A Deep Learning Model for Estimating Air Quality of Karachi City from Mobile Images
Air quality has a significant influence on the environment and health. Instruments that efficiently and inexpensively detect air quality could be extremely valuable in detecting air quality indices. This study presents a robust deep learning model named AQE-Net, for estimating air quality from mobile images. The algorithm extracts features and patterns from scene photographs collected by the camera device and then classifies the images according to air quality index (AQI) levels. Additionally, an air quality dataset (KARACHI-AQI) of high-quality outdoor images was constructed to enable the model’s training and assessment of performance. The sample data were collected from an air quality monitoring station in Karachi City, Pakistan, comprising 1001 hourly datasets, including photographs, PM2.5 levels, and the AQI. This study compares and examines traditional machine learning algorithms, e.g., a support vector machine (SVM), and deep learning models, such as VGG16, InceptionV3, and AQE-Net on the KHI-AQI dataset. The experimental findings demonstrate that, compared to other models, AQE-Net achieved more accurate categorization findings for air quality. AQE-Net achieved 70.1% accuracy, while SVM, VGG16, and InceptionV3 achieved 56.2% and 59.2% accuracy, respectively. In addition, MSE, MAE, and MAPE values were calculated for our model (1.278, 0.542, 0.310), which indicates the remarkable efficacy of our approach. The suggested method shows promise as a fast and accurate way to estimate and classify pollutants from only captured photographs. This flexible and scalable method of assessment has the potential to fill in significant gaps in the air quality data gathered from costly devices around the world.
- 13 November 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14 (22) , 5732
Open AccessAQE-Net: A Deep Learning Model for Estimating Air Quality of Karachi City from Mobile Images
Air quality has a significant influence on the environment and health. Instruments that efficiently and inexpensively detect air quality could be extremely valuable in detecting air quality indices. This study presents a robust deep learning model named AQE-Net, for estimating air quality from mobile images. The algorithm extracts features and patterns from scene photographs collected by the camera device and then classifies the images according to air quality index (AQI) levels. Additionally, an air quality dataset (KARACHI-AQI) of high-quality outdoor images was constructed to enable the model’s training and assessment of performance. The sample data were collected from an air quality monitoring station in Karachi City, Pakistan, comprising 1001 hourly datasets, including photographs, PM2.5 levels, and the AQI. This study compares and examines traditional machine learning algorithms, e.g., a support vector machine (SVM), and deep learning models, such as VGG16, InceptionV3, and AQE-Net on the KHI-AQI dataset. The experimental findings demonstrate that, compared to other models, AQE-Net achieved more accurate categorization findings for air quality. AQE-Net achieved 70.1% accuracy, while SVM, VGG16, and InceptionV3 achieved 56.2% and 59.2% accuracy, respectively. In addition, MSE, MAE, and MAPE values were calculated for our model (1.278, 0.542, 0.310), which indicates the remarkable efficacy of our approach. The suggested method shows promise as a fast and accurate way to estimate and classify pollutants from only captured photographs. This flexible and scalable method of assessment has the potential to fill in significant gaps in the air quality data gathered from costly devices around the world.
- Open Access
- 9 August 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (16) , 9835
Remote Sensing for Surface Coal Mining and Reclamation Monitoring in the Central Salt Range, Punjab, Pakistan
The expansion and exploitation of mining resources are essential for social and economic growth. Remote sensing provides vital tools for surface-mining monitoring operations as well as for reclamation efforts in the central Salt Range of the Indus River Basin, Pakistan. This research demonstrates the applicability of remote sensing techniques to the coal mining monitoring scheme to allow for effective and efficient monitoring and to offset the adverse consequences of coal mining activities. Landsat 8 OLI images from June 2019 and 2020, and a Landsat 7 ETM+ image from June 2002, were used for this study. A three-phase methodology including Normalized Difference Vegetation Index (NDVI) analysis, land cover mapping, and change detection approaches was adopted. Image classification based on Tasseled Cap Transformation and the brightness temperature At-satellite using the K-means algorithm was implemented in a GIS program to identify seven land cover classes within the study area. The results show some level of surface disturbance to the landscape due to the coal mining reclamation activities that had taken place over the 18-year time period. From 2019 to 2020, about 3.622 km2 of coal mines or barren land were converted into bare agricultural land. Over the years, it was also observed that reclamation areas exhibited higher values of NDVI than coal mining areas. The mean NDVI for coal mining areas was 0.252 km2, and for areas of reclamation, it was 0.292 km2 in 2020, while in 2019, the value for coal mining sites was 0.133 km2, and 0.163 km2 for reclamation sites. This trend suggests that coal-mining operations can be monitored using satellite data, and the progress of reclamation efforts can be assessed using satellite NDVI data from the target locations. This study is beneficial to agencies responsible for monitoring land cover changes in a coal mine because it provides a cost-effective, efficient, and robust scientific tool for making mine site allocation decisions and for monitoring the progress of reclamation efforts.
- 9 August 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (16) , 9835
Open AccessRemote Sensing for Surface Coal Mining and Reclamation Monitoring in the Central Salt Range, Punjab, Pakistan
The expansion and exploitation of mining resources are essential for social and economic growth. Remote sensing provides vital tools for surface-mining monitoring operations as well as for reclamation efforts in the central Salt Range of the Indus River Basin, Pakistan. This research demonstrates the applicability of remote sensing techniques to the coal mining monitoring scheme to allow for effective and efficient monitoring and to offset the adverse consequences of coal mining activities. Landsat 8 OLI images from June 2019 and 2020, and a Landsat 7 ETM+ image from June 2002, were used for this study. A three-phase methodology including Normalized Difference Vegetation Index (NDVI) analysis, land cover mapping, and change detection approaches was adopted. Image classification based on Tasseled Cap Transformation and the brightness temperature At-satellite using the K-means algorithm was implemented in a GIS program to identify seven land cover classes within the study area. The results show some level of surface disturbance to the landscape due to the coal mining reclamation activities that had taken place over the 18-year time period. From 2019 to 2020, about 3.622 km2 of coal mines or barren land were converted into bare agricultural land. Over the years, it was also observed that reclamation areas exhibited higher values of NDVI than coal mining areas. The mean NDVI for coal mining areas was 0.252 km2, and for areas of reclamation, it was 0.292 km2 in 2020, while in 2019, the value for coal mining sites was 0.133 km2, and 0.163 km2 for reclamation sites. This trend suggests that coal-mining operations can be monitored using satellite data, and the progress of reclamation efforts can be assessed using satellite NDVI data from the target locations. This study is beneficial to agencies responsible for monitoring land cover changes in a coal mine because it provides a cost-effective, efficient, and robust scientific tool for making mine site allocation decisions and for monitoring the progress of reclamation efforts.
- Open Access
Application of Machine Learning for Lithofacies Prediction and Cluster Analysis Approach to Identify Rock Type
Nowadays, there are significant issues in the classification of lithofacies and the identification of rock types in particular. Zamzama gas field demonstrates the complex nature of lithofacies due to the heterogeneous nature of the reservoir formation, while it is quite challenging to identify the lithofacies. Using our machine learning approach and cluster analysis, we can not only resolve these difficulties, but also minimize their time-consuming aspects and provide an accurate result even when the user is inexperienced. To constrain accurate reservoir models, rock type identification is a critical step in reservoir characterization. Many empirical and statistical methodologies have been established based on the effect of rock type on reservoir performance. Only well-logged data are provided, and no cores are sampled. Given these circumstances, and the fact that traditional methods such as regression are intractable, we have chosen to apply three strategies: (1) using a self-organizing map (SOM) to arrange depth intervals with similar facies into clusters; (2) clustering to split various facies into specific zones; and (3) the cluster analysis technique is used to identify rock type. In the Zamzama gas field, SOM and cluster analysis techniques discovered four group of facies, each of which was internally comparable in petrophysical properties but distinct from the others. Gamma Ray (GR), Effective Porosity(eff), Permeability (Perm) and Water Saturation (Sw) are used to generate these results. The findings and behavior of four facies shows that facies-01 and facies-02 have good characteristics for acting as gas-bearing sediments, whereas facies-03 and facies-04 are non-reservoir sediments. The outcomes of this study stated that facies-01 is an excellent rock-type zone in the reservoir of the Zamzama gas field.
Open AccessApplication of Machine Learning for Lithofacies Prediction and Cluster Analysis Approach to Identify Rock Type
Nowadays, there are significant issues in the classification of lithofacies and the identification of rock types in particular. Zamzama gas field demonstrates the complex nature of lithofacies due to the heterogeneous nature of the reservoir formation, while it is quite challenging to identify the lithofacies. Using our machine learning approach and cluster analysis, we can not only resolve these difficulties, but also minimize their time-consuming aspects and provide an accurate result even when the user is inexperienced. To constrain accurate reservoir models, rock type identification is a critical step in reservoir characterization. Many empirical and statistical methodologies have been established based on the effect of rock type on reservoir performance. Only well-logged data are provided, and no cores are sampled. Given these circumstances, and the fact that traditional methods such as regression are intractable, we have chosen to apply three strategies: (1) using a self-organizing map (SOM) to arrange depth intervals with similar facies into clusters; (2) clustering to split various facies into specific zones; and (3) the cluster analysis technique is used to identify rock type. In the Zamzama gas field, SOM and cluster analysis techniques discovered four group of facies, each of which was internally comparable in petrophysical properties but distinct from the others. Gamma Ray (GR), Effective Porosity(eff), Permeability (Perm) and Water Saturation (Sw) are used to generate these results. The findings and behavior of four facies shows that facies-01 and facies-02 have good characteristics for acting as gas-bearing sediments, whereas facies-03 and facies-04 are non-reservoir sediments. The outcomes of this study stated that facies-01 is an excellent rock-type zone in the reservoir of the Zamzama gas field.
- Open Access
Landslide Susceptibility Mapping Using Machine Learning Algorithm Validated by Persistent Scatterer In-SAR Technique
Landslides are the most catastrophic geological hazard in hilly areas. The present work intends to identify landslide susceptibility along Karakorum Highway (KKH) in Northern Pakistan, using landslide susceptibility mapping (LSM). To compare and predict the connection between causative factors and landslides, the random forest (RF), extreme gradient boosting (XGBoost), k nearest neighbor (KNN) and naive Bayes (NB) models were used in this research. Interferometric synthetic aperture radar persistent scatterer interferometry (PS-InSAR) technology was used to explore the displacement movement of retrieved models. Initially, 332 landslide areas alongside the Karakorum Highway were found to generate the landslide inventory map using various data. The landslides were categorized into two sections for validation and training, of 30% and 70%. For susceptibility mapping, thirteen landslide-condition factors were created. The area under curve (AUC) of the receiver operating characteristic (ROC) curve technique was utilized for accuracy comparison, yielding 83.08, 82.15, 80.31, and 72.92% accuracy for RF, XGBoost, KNN, and NB, respectively. The PS-InSAR technique demonstrated a high deformation velocity along the line of sight (LOS) in model-sensitive areas. The PS-InSAR technique was used to evaluate the slope deformation velocity, which can be used to improve the LSM for the research region. The RF technique yielded superior findings, integrating with the PS-InSAR outcomes to provide the region with a new landslide susceptibility map. The enhanced model will help mitigate landslide catastrophes, and the outcomes may help ensure the roadway’s safe functioning in the study region.
Open AccessLandslide Susceptibility Mapping Using Machine Learning Algorithm Validated by Persistent Scatterer In-SAR Technique
Landslides are the most catastrophic geological hazard in hilly areas. The present work intends to identify landslide susceptibility along Karakorum Highway (KKH) in Northern Pakistan, using landslide susceptibility mapping (LSM). To compare and predict the connection between causative factors and landslides, the random forest (RF), extreme gradient boosting (XGBoost), k nearest neighbor (KNN) and naive Bayes (NB) models were used in this research. Interferometric synthetic aperture radar persistent scatterer interferometry (PS-InSAR) technology was used to explore the displacement movement of retrieved models. Initially, 332 landslide areas alongside the Karakorum Highway were found to generate the landslide inventory map using various data. The landslides were categorized into two sections for validation and training, of 30% and 70%. For susceptibility mapping, thirteen landslide-condition factors were created. The area under curve (AUC) of the receiver operating characteristic (ROC) curve technique was utilized for accuracy comparison, yielding 83.08, 82.15, 80.31, and 72.92% accuracy for RF, XGBoost, KNN, and NB, respectively. The PS-InSAR technique demonstrated a high deformation velocity along the line of sight (LOS) in model-sensitive areas. The PS-InSAR technique was used to evaluate the slope deformation velocity, which can be used to improve the LSM for the research region. The RF technique yielded superior findings, integrating with the PS-InSAR outcomes to provide the region with a new landslide susceptibility map. The enhanced model will help mitigate landslide catastrophes, and the outcomes may help ensure the roadway’s safe functioning in the study region.