LSLateef Oladimeji Sanni

Lateef Oladimeji Sanni

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Lateef Oladimeji Sanni has a total of 220 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Nutritional, techno-functional and pasting properties of orange-fleshed sweet potato, Bambara groundnut and date seed composite flour

    by Tolulope Oresanya, Abdul-Rasaq Adebowale, Adekola Adegoke, Olajide Sobukola, Silifat Sanni, Temitayo Olaleye, Emmanuel Oke, Lateef Sanni

  • Open Access

    Aflatoxin content and heavy metals composition of powdered pepper from selected markets in Kwara state, Nigeria

    by Wasiu Awoyale, Nwineh L. Zorbari, Lateef Oladimeji Sanni

    Aflatoxin and heavy metal concentrations may pose health risks to pepper consumers. No research has been published concerning aflatoxin and heavy metal contamination of powdered pepper in Kwara state, Nigeria, hence the need for this study. Powdered pepper samples from various Kwara state markets (Offa, Oja-Oba, Ganmo, Shao, Elemere, and Malete), were analyzed using standard methods for aflatoxins B1 (AFB1), B2 (AFB2), G1 (AFG1), and G2 (AFG2), and lead, cadmium, copper, and arsenic. A laboratory-prepared sample was used as the control. The samples’ mean AFB1 was 2.86 μg/kg, AFG1 4.34 μg/kg, AFB2 2.03 μg/kg, and AFG2 1.88 μg/kg. In general, the levels of aflatoxin in the powdered pepper samples were found in the order of AFG1 > AFB1 > AFB2 > AFG2. The samples’ aflatoxin concentration is less than the US Food and Drug Administration’s (20 μg/kg) contamination threshold. The FDA’s guideline for lead level in food, which is 0.1 mg/kg, was surpassed by the lead concentration, which varied from 1.84 to 3.45 mg/kg. The range of arsenic concentration was 10.18-22.68 mg/kg, which is higher than the World Health Organization’s recommended limit of 0.0003 mg/kg. The copper concentration met the FDA’s 10-mg/kg threshold, which ranged from 2.66 to 4.42 mg/kg. The study’s findings demonstrate the need for a monitoring and education programme in Kwara state to ensure the public’s safety while consuming powdered pepper.


  • Open Access

    Sweet potato starch-based tapioca grits: influence of moringa seed flour inclusion on the functional, rheological, and sensory qualities of the gruel

    by Wasiu Awoyale, Elizabeth Opoola, Kazeem K. Olatoye, John P. Alimi, Lateef O. Sanni

    This study aimed to evaluate the influence of moringa seed flour (MSF) inclusion on the functional and rheological properties of sweet potato starch (SPS)-based tapioca grits and the sensory acceptability of the gruel. The MSF (2-10%) was properly blended with the SPS (90-98%), using the Central Composite Rotatable Design of the Design-Expert Software. Each blend of the SPS and the MSF, 100%SPS, and cassava starch (CS) were separately toasted at 120 -150oC for 20 min. The grits' functional and pasting properties and the gruel's sensory acceptability were determined using standard methods. The results depict that the MSF inclusion increased the bulk density (80.00 to 83.00%) and oil absorption capacity (70.00 – 81.50%), while the water absorption capacity (518.50 – 108.50%), solubility index (14.00 – 2.00%), and swelling power (13.75-5.58%) decreased. Also, the SPS-MSF tapioca grit’s peak (332.88 – 426.17 RVU), trough (162.04 – 302.71 RVU), final (228.08 – 456.59 RVU), and setback (66.04 – 153.88 RVU) viscosities, peak time (4.34 – 5.90 min) and pasting temperature (57.40 – 82.40oC) increased with MSF inclusion, and the breakdown viscosity (170.84- 52.79 RVU) decreased. Although all the sensory attributes of the SPS-MSF tapioca gruel fall within the likeness range, tapioca gruel produced from 98 g SPS and 10 g MSF blends (7.91) was very much liked compared to the CS tapioca gruel (7.09) in terms of the overall acceptability. Therefore, adding MSF to the SPS-based tapioca grits influences most of the cooked gruel's rheological properties and sensory acceptability.

  • Information Needs of Cassava Farmer-Processors on Cassava Value Addition Technologies in Oyo State, Nigeria

    by Rasak B. Olajide, Lateef. O. Sanni, Godwin Atser, Alfred Dixon, Ibukunoluwa. O. Oladokun

    This study investigated the information needs of cassava farmer-processors on cassava value addition technologies in Oyo State, Nigeria, to ascertain areas of information gap for farmers to maximally exploit the opportunities inherent in the product value addition. Using a multistage sampling procedure, 130 registered cassava farmer-processors were sampled and interviewed. Data were collected on respondents' enterprise characteristics, access to information, perceived benefits and constraints to accessing information and information needs on cassava value addition. Data were analysed using percentage, mean and correlational analysis at p=0.05. Results reveal that respondents had farm size and farming experience of 2.3 ha and 20.1 +/- 13.8 years, respectively, while income was (sic)273,784.6 +/-(sic)458281.3. Though respondents were constrained with low income (70.0%), they reckoned that if they had access to information on value addition, their postharvest loss would be reduced (89.2%). Respondents had information gap on information needs on value addition technologies for producing cassava adhesives (1st), glucose syrups (2nd) and confectionaries (3rd). Farming experience (r = -.236), constraints (r = -.288) and access to sources of information were significantly related to respondents' information needs. It is recommended that information on improved cassava value addition technologies be made available to cassava farmers through relevant sources, especially during emergencies coupled with hands-on training for effective application of information acquired.


  • Open Access

    Enhancing the Shelf-Life of Fresh Cassava Roots: A Field Evaluation of Simple Storage Bags

    by Keith Tomlins, Aditya Parmar, Celestina Ibitayo Omohimi, Lateef Oladimeji Sanni, Adekola Felix Adegoke, Abdul-Rasaq Adesola Adebowale, Ben Bennett

    Postharvest physiological deterioration (PPD) of fresh cassava roots limits their shelf-life to about 48 h. There is a demand for simple, cheap, and logistically feasible solutions for extending the shelf life of fresh cassava roots in industrial processes. In this study, three different types of bag materials were tested, namely woven polypropylene, tarpaulin, and jute as a potential storage solution for cassava roots with different levels of mechanical damage. Microclimate related to temperature, humidity, and carbon di-oxide (CO2) was monitored in order to understand the storage conditions for up to 12 days. The results showed that fresh cassava roots could be stored for 8 days, with minimal PPD and starch loss (2.4%). However, roots with significant mechanical damage in the form of cuts and breakages had a considerably shorter shelf life in the storage bag, compared to whole roots and roots with retained stalk (peduncle) where roots are connected to the main plant. Wetting of the roots and bag material were not significant factors in determining the shelf life and starch loss. Carbon dioxide concentration in the stores was significantly correlated with the starch loss in fresh cassava roots and is proposed as a possible method for continuously and remotely monitoring starch loss in large-scale commercial operations and reducing postharvest losses.


  • Exposure to air pollutants and heat stress among resource-poor women entrepreneurs in small-scale cassava processing

    by Aditya Parmar, Keith Tomlins, Lateef Sanni, Celestina Omohimi, Funmi Thomas, Thierry Tran

    Exposure to air pollutants and heat stress from traditional cooking fires is the leading cause of mortality and morbidity in low- and middle-income countries globally and have an adverse effect on the environment. According to the World Health Organization, 3.8 million people die annually prematurely from illness related to household air pollution. Families living in poverty are at the highest risk, especially women and children. In this study, exposure to particulate matter (PM2.5 and PM10), carbon monoxide (CO) and nitrogen dioxide (NO2) was measured among resource-poor women cassava processors. The test locations were chosen in the peri-urban settlements of Abeokuta in the Ogun State of Nigeria, where household women entrepreneurs roast garri (granulated cassava) for sale in the local market. The measurements were taken for two types of stoves which are generally existing in the study location. First, a rectangular stove (RS) with two operators and, second, a circular stove (CS) with one operator; both stoves used wood as fuel. The emissions were compared with a modern mechanical liquefied petroleum gas burner-based garri roaster (GS). Hours spent per day in front of garri stoves ranged from 6 to 12 h for both stoves, with a frequency of 1 to 3 days of operation per week. It was found that CS operators were spending significantly more time in producing garri, which is due to the low capacity of the CS. The average PM2.5 concentrations for RS and CS were 381 and 273 μg/m3, respectively, estimated to be 21 and 41 μg/m3 on an annual mean level basis. Similarly, for PM10, the mean concentration levels were 1580 and 594 μg/m3 for RS and CS, respectively. The annual mean levels for PM10 were about 89 μg/m3 for both types of stoves. CO exposure during garri processing was up to five times higher than the recommended concentrations with a 4-h mean of 48 and 50 mg/m3 for RS and CS, respectively. NO2 levels were very low, ~ 0 ppm. This investigative research concluded that wood-fired small-scale garri producers in Nigeria are exposed to very unhealthy levels of PM, CO and thermal stress. The concentration levels of both PM and CO were exceeding the global as well as Nigerian ambient air quality standard regulations. Along with air pollution, thermal stress was a significant issue, which is known to exacerbate the negative effect of air pollution on the human body.


  • Open Access

    Safety of Yam-Derived (Dioscorea rotundata) Foodstuffs—Chips, Flakes and Flour: Effect of Processing and Post-Processing Conditions

    by Celestina Omohimi, Clara Piccirillo, Vincenza Ferraro, Mariana C. Roriz, Mobolaji A. Omemu, Sandra M. Dias Santos, Sandrine Da Ressurreição, Louise Abayomi, Abdulraqaz Adebowale, Marta W. Vasconcelos, et al.

    The production of yam-derived (Dioscorea rotundata) foodstuffs is mainly performed by small and medium scale processors that employ old traditional methods. This can lead to differences in quality from processor to processor, and from location to location, with consequent safety concerns. As such, the effects of processing and post-processing phases (i.e., storage, transport, etc.) on the safety of some yam-derived foodstuffs—namely chips, flakes, and flour—has been evaluated, with a focus on bacterial and fungal contamination, aflatoxins, pesticides, and heavy metals (Pb, Ni, Cd and Hg). Yams harvested and processed in Nigeria were screened, being that the country is the largest producer of the tuber, with 70–75% of the world production. Results highlighted no presence of pesticides, however, many samples showed high levels of bacterial and fungal contamination, together with heavy metal concentrations above the recommended safety levels. No trend was observed between the items considered; it was noticed, however, that samples purchased from the markets showed higher contamination levels than those freshly produced, especially regarding bacterial and aflatoxins presence. The processing stage was identified as the most critical, especially drying. Nonetheless, post-processing steps such as storage and handling at the point of sale also contributed for chemical contamination, such as aflatoxin and heavy metals. The results suggested that both the processing and post-processing phases have an impact on the safety of yam chips, flakes, and flour.


  • Open Access

    Evaluation of some quality parameters of cassava starch and soy protein isolate matrices during deep fat frying in soybean oil

    by Adebukola T. Omidiran, Olajide P. Sobukola, Silifat A. Sanni, Lateef O. Sanni, Abdulrasaq A. Adebowale, Adebola O. Shajobi, Peter Kulakow

    Snack industry is recently focused on the production of snacks with minimal oil content and enhanced quality attributes which prompted the need to study the changes in snack matrices produced from cassava starch processed from three varieties of cassava roots (TMS‐950289, TME‐419, and TMS‐30572) and soy protein isolate blends fried in soybean oil. Effect of frying temperature (170–180°C), frying time (2–4 min), soy protein isolate inclusion level (5%–15%) on proximate composition, color changes, expansion, texture, and sensory attributes of the snacks was investigated. Optimization of process variables was carried out based on a factorial design (2 level by 3 factor) in the Design Expert version 6.0.8, and models were generated showing the relationship between the independent variables and the responses. The desired goal for each constraint (processing conditions) was kept within 170–180°C for 2–4 min, while all responses, except chewiness, expansion, yellowness, and protein, were set at minimum. Evaluation of sensory attributes of the optimized sample was carried out to determine its level of desirability. The optimized frying conditions for matrices produced from starches of TMS‐950289 are 170°C/4 min/5% SPI with desirability value of 0.507; from TME‐419 are 180°C/2 min/5% SPI with desirability value of 0.475 while for those from TMS‐30572 are 170°C/4 min/15% SPI with desirability value of 0.459. At higher SPI level, the protein content was high at 170°C. At 4 min frying time for all the varieties, the moisture content reduces. The most desired optimized fried snack produced from starch of TMS‐30572 (containing 15% SPI) had higher crispness and lower oil content than other optimized fried snacks.


  • Optimisation of pre-treatment conditions for plantain (Musa parasidiaca) flour using Box-Behnken design

    by G.J. Fadimu, L.O. Sanni, A.A. Adebowale, S.O. Kareem, O.P. Sobukola, O.E. Kajihausa, P. Abdulsalam-Saghir, B.O. Siwoku, A.O. Akinsanya, M.K. Adenekan

    The demand for plantain flour has increased in recent years due to its health benefits and industrial applications. Information on the optimum processing conditions to produce plantain flour of good quality is scarce. This study investigated the effects of pre-treatment on some quality attributes of unripe plantain flour. Response surface methodology (RSM) based on Box-Behnken design was used to optimise the pre-treatment conditions: blanching temperature (50-70 °C), blanching time (5-10 min) and potassium metabisulphite concentration (PMC) (1-2%). The functional and pasting properties of the plantain flour were determined using standard laboratory procedures. Data collected were subjected to analysis of variance, while RSM based on Box-Behnken design was used for response surface and regression analysis. Result of functional and proximate composition showed that pre-treatment significantly (P2) for the quadratic models developed ranged between 0.64 and 0.99 and these high values indicates a good fit between predicted values and the experimental data points.


  • Open Access

    Shaping, adapting and reserving the right to play

    by Richard Lamboll, Adrienne Martin, Lateef Sanni, Kolawole Adebayo, Andrew Graffham, Ulrich Kleih, Louise Abayomi, Andrew Westby

    Purpose: The purpose of this paper is to explain why the high quality cassava flour (HQCF) value chain in Nigeria has not performed as well as expected. The specific objectives are to: analyse important sources of uncertainty influencing HQCF value chains; explore stakeholders’ strategies to respond to uncertainty; and highlight the implications of different adaptation strategies for equity and the environment in the development of the value chain. Design/methodology/approach: The authors used a conceptual framework based on complex adaptive systems to analyse the slow development of the value chain for HQCF in Nigeria, with a specific focus on how key stakeholders have adapted to uncertainty. The paper is based on information from secondary sources and grey literature. In particular, the authors have drawn heavily on project documents of the Cassava: Adding Value for Africa project (2008 to present), which is funded by the Bill & Melinda Gates Foundation, and on the authors’ experience with this project. Findings: Policy changes; demand and supply of HQCF; availability and price of cassava roots; supply and cost of energy are major sources of uncertainty in the chain. Researchers and government have shaped the chain through technology development and policy initiatives. Farmers adapted by selling cassava to rival chains, while processors adapted by switching to rival cassava products, reducing energy costs and vertical integration. However, with uncertainties in HQCF supply, the milling industry has reserved the right to play. Vertical integration offers millers a potential solution to uncertainty in HQCF supply, but raises questions about social and environmental outcomes in the chain. Research limitations/implications: The use of the framework of complex adaptive systems helped to explain the development of the HQCF value chain in Nigeria. The authors identified sources of uncertainty that have been pivotal in restricting value chain development, including changes in policy environment, the demand for and supply of HQCF, the availability and price of cassava roots, and the availability and cost of energy for flour processing. Value chain actors have responded to these uncertainties in different ways. Analysing these responses in terms of adaptation provides useful insights into why the value chain for HQCF in Nigeria has been so slow to develop. Social implications: Recent developments suggest that the most effective strategy for the milling industry to reduce uncertainty in the HQCF value chain is through vertical integration, producing their own cassava roots and flour. This raises concerns about equity. Until now, it has been assumed that the development of the value chain for HQCF can combine both growth and equity objectives. The validity of this assumption now seems to be open to question. The extent to which these developments of HQCF value chains can combine economic growth, equity and environmental objectives, as set out in the sustainable development goals, is an open question. Originality/value: The originality lies in the analysis of the development of HQCF value chains in Nigeria through the lens of complex adaptive systems, with a particular focus on uncertainty and adaptation. In order to explore adaptation, the authors employ Courtney et al.’s (1997) conceptualization of business strategy under conditions of uncertainty. They argue that organisations can assume three strategic postures in response to uncertainty and three types of actions to implement that strategy. This combination of frameworks provides a fresh means of understanding the importance of uncertainty and different actors’ strategies in the development of value chains in a developing country context.