Adriana Vargas-Nordcbeck
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Adriana Vargas-Nordcbeck has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Anthony Brenes-Calderon
National Center for Asphalt Technology, Auburn University, Auburn, AL 36830, USA
4 shared publications - Fabricio Leiva-Villacorta
Glenn Department of Civil Engineering, Clemson University, Clemson, SC 29634, USA
2 shared publications Anthony Brenes-Calderón
National Center for Asphalt Technology, Auburn University, Auburn, AL
1 shared publication- Benjamin F. Bowers
Department of Civil and Environmental Engineering, Auburn University, Auburn, AL
1 shared publication Buzz Powell
National Center for Asphalt Technology at Auburn University
1 shared publication- Cheryl Seals
Auburn University
1 shared publication
Latest Publications
- 11 September 2026
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
Long-Term Field Performance Evaluation of Chip Seals
The optimal timing and long-term effectiveness of chip seal treatments on newly constructed pavements remain uncertain, particularly for local agency roads. This study was an evaluation of the field performance of chip seals applied at different postconstruction intervals (from immediately to after 4 years) across three local agencies in Minnesota: Cass County, Crow Wing County, and the City of St. Cloud. Performance was monitored from 2015 to 2025 using the International Roughness Index (IRI), manual crack counts, and surface ratings. Linear mixed-effects models were used to assess performance trends. Results show that early application, either immediately after construction or within 1 year, was associated with better surface condition. However, binder type and reclaimed asphalt pavement content in the original pavement mix design exerted greater influence on long-term durability than chip seal timing alone. While chip seals were associated with preservation benefits, baseline material design largely dictated performance outcomes. Cracking data and IRI alone were insufficient for optimizing chip seal treatment schedules. The integration of material, structural, functional, and environmental factors may improve treatment timing decisions and maximize preservation benefits.
- 11 September 2026
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
Long-Term Field Performance Evaluation of Chip Seals
The optimal timing and long-term effectiveness of chip seal treatments on newly constructed pavements remain uncertain, particularly for local agency roads. This study was an evaluation of the field performance of chip seals applied at different postconstruction intervals (from immediately to after 4 years) across three local agencies in Minnesota: Cass County, Crow Wing County, and the City of St. Cloud. Performance was monitored from 2015 to 2025 using the International Roughness Index (IRI), manual crack counts, and surface ratings. Linear mixed-effects models were used to assess performance trends. Results show that early application, either immediately after construction or within 1 year, was associated with better surface condition. However, binder type and reclaimed asphalt pavement content in the original pavement mix design exerted greater influence on long-term durability than chip seal timing alone. While chip seals were associated with preservation benefits, baseline material design largely dictated performance outcomes. Cracking data and IRI alone were insufficient for optimizing chip seal treatment schedules. The integration of material, structural, functional, and environmental factors may improve treatment timing decisions and maximize preservation benefits.
- Open Access
- 11 September 2025
- Published by MDPI AG in Construction Materials
- Vol. 5 (3) , 66
Determining Performance, Economic, and Environmental Benefits of Pavement Preservation Treatments: Results from a Systematic Framework for PMS
This study evaluated the benefits of pavement preservation treatments across two climatic zones using data from the National Center for Asphalt Technology (NCAT) Pavement Preservation Group Study. Longitudinal data analysis was conducted to quantify pavement performance over time. Results indicate that in the freeze zone, treatments significantly improved pavement smoothness, as evidenced by reductions in the progression of the International Roughness Index (IRI), whereas similar trends were not observed in the no-freeze region, highlighting the need for further research to quantify the benefits in these zones. Life cycle cost analysis (LCCA) showed that selected preservation treatments reduced user costs by 54–57% due to lower excess fuel consumption, particularly in high-traffic corridors. These treatments also contributed to reductions in greenhouse gas (GHG) emissions by decreasing fuel use. Despite these findings, comprehensive, high-quality data are needed to fully evaluate the economic and environmental benefits of preservation treatments at the project level and to improve decision-making in pavement management strategies.
- 11 September 2025
- Published by MDPI AG in Construction Materials
- Vol. 5 (3) , 66
Open AccessDetermining Performance, Economic, and Environmental Benefits of Pavement Preservation Treatments: Results from a Systematic Framework for PMS
This study evaluated the benefits of pavement preservation treatments across two climatic zones using data from the National Center for Asphalt Technology (NCAT) Pavement Preservation Group Study. Longitudinal data analysis was conducted to quantify pavement performance over time. Results indicate that in the freeze zone, treatments significantly improved pavement smoothness, as evidenced by reductions in the progression of the International Roughness Index (IRI), whereas similar trends were not observed in the no-freeze region, highlighting the need for further research to quantify the benefits in these zones. Life cycle cost analysis (LCCA) showed that selected preservation treatments reduced user costs by 54–57% due to lower excess fuel consumption, particularly in high-traffic corridors. These treatments also contributed to reductions in greenhouse gas (GHG) emissions by decreasing fuel use. Despite these findings, comprehensive, high-quality data are needed to fully evaluate the economic and environmental benefits of preservation treatments at the project level and to improve decision-making in pavement management strategies.
- 5 March 2025
- Published by Springer Nature
- p. 1-15
Lightweight Deep Convolutional Neural Network for Pavement Crack Recognition with Explainability Analysis
- 5 March 2025
- Published by Springer Nature
- p. 1-15
Lightweight Deep Convolutional Neural Network for Pavement Crack Recognition with Explainability Analysis
- Open Access
- 20 February 2025
- Published by Springer Nature in International Journal of Pavement Research and Technology
- p. 1-13
Field Performance Assessment and Unsupervised Modeling of Thin Asphalt Overlays as Preservation Treatments for Highway Pavements, a Case Study
Thin asphalt overlays are a popular preservation treatment for asphalt and composite pavements due to their ability to address multiple pavement distresses. Their efficiency depends on several components such as traffic, climate, and the pavement condition at the time the treatment is applied. Nevertheless, typical life expectancy for thin overlays ranges between 7 and 12 years. Significant traffic volumes experienced on highway tend to accelerate pavement deterioration. Therefore, this study aimed to evaluate the field performance of thin asphalt overlays through several surface indicators such as rutting, cracking, and roughness. Data from the Pavement Preservation Group Study, a broader research study conducted by the National Center for Asphalt Technology and the Minnesota Department of Transportation’s Road Research Facility was utilized. Specifically, control sections (untreated) and thin overlays placed on highway pavements at two different geographic locations, with distinctive climatic conditions, were studied. A k-means cluster and principal component analysis were performed to group sections with similar performance since various thin overlay configurations and combinations with alternative pavement preservation treatments have arisen. The findings revealed that thin overlays as preservation treatments contribute to maximizing pavement service life, maintaining roughness in good condition (International Roughness Index, IRI below 1.5 m/km even after 6 years), and decreasing its progression by up to 84% compared to untreated sections. These benefits were dependent on the respective pre-treatment condition and treatment configuration. Additionally, climatic conditions in each specific region play a crucial role in determining treatment performance.
- 20 February 2025
- Published by Springer Nature in International Journal of Pavement Research and Technology
- p. 1-13
Open AccessField Performance Assessment and Unsupervised Modeling of Thin Asphalt Overlays as Preservation Treatments for Highway Pavements, a Case Study
Thin asphalt overlays are a popular preservation treatment for asphalt and composite pavements due to their ability to address multiple pavement distresses. Their efficiency depends on several components such as traffic, climate, and the pavement condition at the time the treatment is applied. Nevertheless, typical life expectancy for thin overlays ranges between 7 and 12 years. Significant traffic volumes experienced on highway tend to accelerate pavement deterioration. Therefore, this study aimed to evaluate the field performance of thin asphalt overlays through several surface indicators such as rutting, cracking, and roughness. Data from the Pavement Preservation Group Study, a broader research study conducted by the National Center for Asphalt Technology and the Minnesota Department of Transportation’s Road Research Facility was utilized. Specifically, control sections (untreated) and thin overlays placed on highway pavements at two different geographic locations, with distinctive climatic conditions, were studied. A k-means cluster and principal component analysis were performed to group sections with similar performance since various thin overlay configurations and combinations with alternative pavement preservation treatments have arisen. The findings revealed that thin overlays as preservation treatments contribute to maximizing pavement service life, maintaining roughness in good condition (International Roughness Index, IRI below 1.5 m/km even after 6 years), and decreasing its progression by up to 84% compared to untreated sections. These benefits were dependent on the respective pre-treatment condition and treatment configuration. Additionally, climatic conditions in each specific region play a crucial role in determining treatment performance.
- Open Access
Repeatability and Reproducibility of Pavement Density Profiling Systems
The work conducted in this study was designed to establish achievable testing tolerances for non-destructive pavement density measurements using Density Profiling Systems (DPSs). Nine and six sensors were used to determine the precision of repeatability and reproducibility in the laboratory and the field, respectively. A minimum of six sensors (considered in this study as independent laboratories) were needed to comply with the minimum number of participants required in the current ASTM standard practice (ASTM E691). The methodology included the development of laboratory precision evaluation with a total of nine sensors and two different mixtures (9.5 mm fine-graded mix, 19.0 mm coarse-graded mix) compacted at four density levels (97%, 94%, 91%, and 88% of Gmm). For the field portion of this study, pavement sections built at the National Center for Asphalt Technology (NCAT) Test Track in 2021 served as experimental variables. These sections were built with fine-graded asphalt mixtures and open-graded mixes as wearing courses. Additionally, the pavement sections included three underlying materials: new asphalt (binder layer), milled asphalt surface, and granular base, with thicknesses ranging from 3.8 to 13.9 cm. Density profile testing was conducted at two locations: within the mat (center of the lane) and along the joint. Computed precision statements regarding dielectric values within and between laboratories were about double for field results compared to laboratory results. However, when converted to density, the statements were significantly below the reported statements for Bulk Specific Gravity and Vacuum Sealing in the laboratory and Nuclear and Electromagnetic density gauges in the field.
Open AccessRepeatability and Reproducibility of Pavement Density Profiling Systems
The work conducted in this study was designed to establish achievable testing tolerances for non-destructive pavement density measurements using Density Profiling Systems (DPSs). Nine and six sensors were used to determine the precision of repeatability and reproducibility in the laboratory and the field, respectively. A minimum of six sensors (considered in this study as independent laboratories) were needed to comply with the minimum number of participants required in the current ASTM standard practice (ASTM E691). The methodology included the development of laboratory precision evaluation with a total of nine sensors and two different mixtures (9.5 mm fine-graded mix, 19.0 mm coarse-graded mix) compacted at four density levels (97%, 94%, 91%, and 88% of Gmm). For the field portion of this study, pavement sections built at the National Center for Asphalt Technology (NCAT) Test Track in 2021 served as experimental variables. These sections were built with fine-graded asphalt mixtures and open-graded mixes as wearing courses. Additionally, the pavement sections included three underlying materials: new asphalt (binder layer), milled asphalt surface, and granular base, with thicknesses ranging from 3.8 to 13.9 cm. Density profile testing was conducted at two locations: within the mat (center of the lane) and along the joint. Computed precision statements regarding dielectric values within and between laboratories were about double for field results compared to laboratory results. However, when converted to density, the statements were significantly below the reported statements for Bulk Specific Gravity and Vacuum Sealing in the laboratory and Nuclear and Electromagnetic density gauges in the field.
- 5 August 2023
- Published by Taylor & Francis in International Journal of Pavement Engineering
- Vol. 24 (1)
Use of chip seal treatments to mitigate pavement roughness progression in cold regions
- 5 August 2023
- Published by Taylor & Francis in International Journal of Pavement Engineering
- Vol. 24 (1)
Use of chip seal treatments to mitigate pavement roughness progression in cold regions
- 1 June 2022
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2676 (11) , 545-555
Pavement Recycling in Cold Climates: Laboratory and Field Performance of the MnROAD Cold Recycling and Full Depth Reclamation Experiment
In 2019 a series of test sections were constructed on 70th Street in Albertville/Otsego, MN. The existing roadway was badly deteriorated with an international roughness index value above 300 in./mi, which places it in a “poor” performance category. A combination of treatments including cold in-place recycling (CIR), cold central plant recycling (CCPR), and full depth reclamation (FDR) stabilized with foamed or emulsified asphalt were used to evaluate performance in cold regions. Sections including a typical hot mix asphalt (HMA) mill and fill were also evaluated. All sections contained a 1-in. HMA thinlay as the wearing surface. This paper presents the laboratory testing data for the mixtures, including application of HMA tests not typically applied to CIR, CCPR, and FDR, the field performance to date, and a new approach to connecting laboratory data to field performance.
- 1 June 2022
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2676 (11) , 545-555
Pavement Recycling in Cold Climates: Laboratory and Field Performance of the MnROAD Cold Recycling and Full Depth Reclamation Experiment
In 2019 a series of test sections were constructed on 70th Street in Albertville/Otsego, MN. The existing roadway was badly deteriorated with an international roughness index value above 300 in./mi, which places it in a “poor” performance category. A combination of treatments including cold in-place recycling (CIR), cold central plant recycling (CCPR), and full depth reclamation (FDR) stabilized with foamed or emulsified asphalt were used to evaluate performance in cold regions. Sections including a typical hot mix asphalt (HMA) mill and fill were also evaluated. All sections contained a 1-in. HMA thinlay as the wearing surface. This paper presents the laboratory testing data for the mixtures, including application of HMA tests not typically applied to CIR, CCPR, and FDR, the field performance to date, and a new approach to connecting laboratory data to field performance.
- 12 April 2022
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2676 (9) , 202-215
Effect of Mill and Thin Overlays on Roughness for Pavements in Cold Climate Locations
Mill and thin asphalt overlays are a popular preservation treatment for asphalt and composite pavements owing to their ability to address a variety of distresses. Their effectiveness depends on different factors such as traffic, climate, and condition of the pavement at the time of treatment, with typical treatment lives ranging from 5 to 12 years. In cold regions, performance in relation to roughness is of particular interest, as factors like frost action and thermal cracking tend to accelerate roughness progression. The objective of this study was to evaluate the effect of thin asphalt overlays on pavement roughness in cold climate locations using a set of field performance data from the Pavement Preservation Group Study, a broader research study conducted by the National Center for Asphalt Technology and the Minnesota Department of Transportation’s Road Research Facility. The findings indicated that treatment application resulted in both short- and long-term benefits. Following construction, a performance jump was obtained, which was greater for pavement sections with higher International Roughness Index (IRI) IRIpre values. This can be interpreted as rougher sections benefiting more in the short term than smoother sections, where the IRI is already low. Conversely, pavements with lower roughness at the time of treatment obtained greater life-extending benefits. This is interpreted as smoother pavements obtaining a greater benefit over time, and reinforces the concept of preserving pavements while in good condition to maximize pavement life. The magnitude of the benefits was also dependent on the type of milling machine used.
- 12 April 2022
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2676 (9) , 202-215
Effect of Mill and Thin Overlays on Roughness for Pavements in Cold Climate Locations
Mill and thin asphalt overlays are a popular preservation treatment for asphalt and composite pavements owing to their ability to address a variety of distresses. Their effectiveness depends on different factors such as traffic, climate, and condition of the pavement at the time of treatment, with typical treatment lives ranging from 5 to 12 years. In cold regions, performance in relation to roughness is of particular interest, as factors like frost action and thermal cracking tend to accelerate roughness progression. The objective of this study was to evaluate the effect of thin asphalt overlays on pavement roughness in cold climate locations using a set of field performance data from the Pavement Preservation Group Study, a broader research study conducted by the National Center for Asphalt Technology and the Minnesota Department of Transportation’s Road Research Facility. The findings indicated that treatment application resulted in both short- and long-term benefits. Following construction, a performance jump was obtained, which was greater for pavement sections with higher International Roughness Index (IRI) IRIpre values. This can be interpreted as rougher sections benefiting more in the short term than smoother sections, where the IRI is already low. Conversely, pavements with lower roughness at the time of treatment obtained greater life-extending benefits. This is interpreted as smoother pavements obtaining a greater benefit over time, and reinforces the concept of preserving pavements while in good condition to maximize pavement life. The magnitude of the benefits was also dependent on the type of milling machine used.
- 26 August 2020
- Published by Springer Nature
- p. 348-356
Micro Surfacing Performance Under Accelerated Pavement Testing
- 26 August 2020
- Published by Springer Nature
- p. 348-356
Micro Surfacing Performance Under Accelerated Pavement Testing