Pavel A. Kuznetsov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Pavel A. Kuznetsov has a total of 138 co-authors. Here are the top co-authors by number of shared publications:
- Anton Zhukov
NRC "Kurchatov Institute" – CRISM "Prometey
10 shared publications A. K. Mazeeva
Research Center “Kurchatov Institute,” Central Research Institute of Structural Materials “Prometei
5 shared publicationsE. A. Samodelkin
NRC Kurchatov Institute CRISM Prometei
5 shared publicationsE. I. Khlusova
National Research Centre Kurchatovsky Institute, Central Scientific Research Institute of Structural Materials Prometey, Saint-Petersburg, Russia
5 shared publicationsO. A. Ivanov
Ural Federal UniversityNamed after the First President of Russia B.N. Yeltsin
5 shared publicationsE. A. Stepanova
Ural Federal University
4 shared publications
Latest Publications
- 5 November 2026
- Published by Springer Nature in Metal Science and Heat Treatment
- p. 1-7
Textural Heredity in High-Strength Shipbuilding Steel 09CrNi2MoCu During Repeated γ → α Transformation
- 5 November 2026
- Published by Springer Nature in Metal Science and Heat Treatment
- p. 1-7
Textural Heredity in High-Strength Shipbuilding Steel 09CrNi2MoCu During Repeated γ → α Transformation
- 1 May 2024
- Published by Pleiades Publishing Ltd in Technical Physics
- Vol. 69 (5) , 1287-1295
Development and Study of Magnetic Shields for Neutrino Detector Photomultiplier Tubes under Neutrino-4M Experiment on PIK and SM-3 Reactors
A shielding system on the basis of MAP-1K rolled magnetic material was simulated and made, and is designed to protect photomultiplier tubes integrated in new neutrino detectors under NEUTRINE-4M experiment against Earth’s magnetic field. Shielding coefficient was calculated for an individual cylindrical shield and assembly of 25 shields with the shielding structure axis directed along or across Earth’s horizontal magnetic field. The obtained experimental data was compared with computer simulated data. Features of interaction between the shields in the system were examined. It was demonstrated that there is virtually no Earth’s magnetic field effect on the detector performance when the detector is moved and rotated in the experiment with a new neutrino detector furnished with magnetic shields.
- 1 May 2024
- Published by Pleiades Publishing Ltd in Technical Physics
- Vol. 69 (5) , 1287-1295
Development and Study of Magnetic Shields for Neutrino Detector Photomultiplier Tubes under Neutrino-4M Experiment on PIK and SM-3 Reactors
A shielding system on the basis of MAP-1K rolled magnetic material was simulated and made, and is designed to protect photomultiplier tubes integrated in new neutrino detectors under NEUTRINE-4M experiment against Earth’s magnetic field. Shielding coefficient was calculated for an individual cylindrical shield and assembly of 25 shields with the shielding structure axis directed along or across Earth’s horizontal magnetic field. The obtained experimental data was compared with computer simulated data. Features of interaction between the shields in the system were examined. It was demonstrated that there is virtually no Earth’s magnetic field effect on the detector performance when the detector is moved and rotated in the experiment with a new neutrino detector furnished with magnetic shields.
- Open Access
- 1 January 2024
- Published by Herzen State Pedagogical University of Russia
- Vol. 5 (3) , 111–123
Research of the protective ability of coatings on steel powder against atmospheric corrosion
Storing the main material for additive technologies, i. e. metal powder compositions made from steels and alloys with low corrosion resistance, is a challenge. We studied the protective ability of coatings applied by chemical heat treatment (CHT) to the surface of a steel powder, which has low resistance against atmospheric corrosion. Long-term two-year tests of powder samples with various coating compositions were carried out at natural atmospheric humidity and ambient temperature in the Northwestern Federal District of the Russian Federation. The chemical composition of the samples was evaluated before and after the test. The chemical composition and morphology of the particles were determined by electron microprobe (EMP) using a scanning electron microscope (SEM). It is shown that coatings applied by the CHT method do not create continuous protection and accelerate corrosion processes in comparison with the heat-treated powder of the initial steel. Существует проблема хранения основного материала в условиях применения технологий лазерного синтеза — металлопорошковых композиций сталей и сплавов, которые обладают низкой коррозионной стойкостью. Данное исследование направлено на изучение устойчивости покрытий, нанесенных методом химико-термической обработки (ХТО) на поверхность порошка стали, которая обладает низкой стойкостью к атмосферной коррозии. Проведены длительные испытания порошковых проб с различным составом покрытий в условиях естественной атмосферной влажности и температуры окружающей среды Северо-Западного федерального округа РФ в течение двух лет. Оценивался химический состав образцов до и после испытания. Определение химического состава и морфологии частиц производилось методом рентгеноструктурного микроанализа (РСМА) с использование растрового электронного микроскопа (РЭМ). Показано, что покрытия, нанесенные методом ХТО, не создают сплошной защиты и ускоряют коррозионные процессы по сравнению с термообработанным порошком исходной стали.
- 1 January 2024
- Published by Herzen State Pedagogical University of Russia
- Vol. 5 (3) , 111–123
Open AccessResearch of the protective ability of coatings on steel powder against atmospheric corrosion
Storing the main material for additive technologies, i. e. metal powder compositions made from steels and alloys with low corrosion resistance, is a challenge. We studied the protective ability of coatings applied by chemical heat treatment (CHT) to the surface of a steel powder, which has low resistance against atmospheric corrosion. Long-term two-year tests of powder samples with various coating compositions were carried out at natural atmospheric humidity and ambient temperature in the Northwestern Federal District of the Russian Federation. The chemical composition of the samples was evaluated before and after the test. The chemical composition and morphology of the particles were determined by electron microprobe (EMP) using a scanning electron microscope (SEM). It is shown that coatings applied by the CHT method do not create continuous protection and accelerate corrosion processes in comparison with the heat-treated powder of the initial steel. Существует проблема хранения основного материала в условиях применения технологий лазерного синтеза — металлопорошковых композиций сталей и сплавов, которые обладают низкой коррозионной стойкостью. Данное исследование направлено на изучение устойчивости покрытий, нанесенных методом химико-термической обработки (ХТО) на поверхность порошка стали, которая обладает низкой стойкостью к атмосферной коррозии. Проведены длительные испытания порошковых проб с различным составом покрытий в условиях естественной атмосферной влажности и температуры окружающей среды Северо-Западного федерального округа РФ в течение двух лет. Оценивался химический состав образцов до и после испытания. Определение химического состава и морфологии частиц производилось методом рентгеноструктурного микроанализа (РСМА) с использование растрового электронного микроскопа (РЭМ). Показано, что покрытия, нанесенные методом ХТО, не создают сплошной защиты и ускоряют коррозионные процессы по сравнению с термообработанным порошком исходной стали.
- 1 March 2023
- Published by Springer Nature in Metallurgist
- Vol. 66 (11-12) , 1344-1359
Structure and Properties of New High-Strength Steels Produced by PAO Severstal’ for Arctic Structures
- 1 March 2023
- Published by Springer Nature in Metallurgist
- Vol. 66 (11-12) , 1344-1359
Structure and Properties of New High-Strength Steels Produced by PAO Severstal’ for Arctic Structures
- 1 December 2022
- Published by Pleiades Publishing Ltd in Inorganic Materials: Applied Research
- Vol. 13 (6) , 1459-1468
Development of Thermal Rolling Regimes of Low-Alloy Arc Steel with Quasi-Homogeneous Ferrite-Bainitic Structure
In this work, the kinetics of the growth of austenite grains upon heating, the features of the processes of dynamic and static recrystallization occurring at various temperature-deformation modes of plastic deformation are investigated. Phase transformations have been studied during continuous cooling of hot-deformed austenite in low-alloy Arc steel with a yield point of at least 420 MPa. The studies carried out made it possible to determine the thermal deformation parameters that ensure the formation of a finely dispersed homogeneous ferrite-bainitic structure, on the basis of which technological recommendations for industrial production were developed and sheet products were manufactured. Presented are the structure and properties of sheet metal from shipbuilding Arc steel of strength category of 420 MPa.
- 1 December 2022
- Published by Pleiades Publishing Ltd in Inorganic Materials: Applied Research
- Vol. 13 (6) , 1459-1468
Development of Thermal Rolling Regimes of Low-Alloy Arc Steel with Quasi-Homogeneous Ferrite-Bainitic Structure
In this work, the kinetics of the growth of austenite grains upon heating, the features of the processes of dynamic and static recrystallization occurring at various temperature-deformation modes of plastic deformation are investigated. Phase transformations have been studied during continuous cooling of hot-deformed austenite in low-alloy Arc steel with a yield point of at least 420 MPa. The studies carried out made it possible to determine the thermal deformation parameters that ensure the formation of a finely dispersed homogeneous ferrite-bainitic structure, on the basis of which technological recommendations for industrial production were developed and sheet products were manufactured. Presented are the structure and properties of sheet metal from shipbuilding Arc steel of strength category of 420 MPa.
- 30 September 2021
- Published by Springer Nature in Metallurgist
- Vol. 65 (5-6) , 485-499
Development and Implementation of Technologies for Production of Rolled Steel of New Generation for Shipbuilding at PJSC “MMK”
- 30 September 2021
- Published by Springer Nature in Metallurgist
- Vol. 65 (5-6) , 485-499
Development and Implementation of Technologies for Production of Rolled Steel of New Generation for Shipbuilding at PJSC “MMK”
- 1 November 2019
- Published by Springer Nature in Metallurgist
- Vol. 63 (7-8) , 695-703
Development of an Import-Replacing Technology Aimed at Manufacturing Mandrels Маde of X35CrMoV05KU-UNI 2955 Steel for Tubular Mills
- 1 November 2019
- Published by Springer Nature in Metallurgist
- Vol. 63 (7-8) , 695-703
Development of an Import-Replacing Technology Aimed at Manufacturing Mandrels Маde of X35CrMoV05KU-UNI 2955 Steel for Tubular Mills
- 1 December 2018
- Published by Pleiades Publishing Ltd in Physics of Metals and Metallography
- Vol. 119 (12) , 1154-1161
Conditions for the Formation of a Polymeric Coating and the Magnetic Properties of Cobalt-Based Amorphous Alloys
This paper presents the results of an investigation of the influence of the polymeric coating used in the course of the production of magnetic shields and conditions necessary for its...
- 1 December 2018
- Published by Pleiades Publishing Ltd in Physics of Metals and Metallography
- Vol. 119 (12) , 1154-1161
Conditions for the Formation of a Polymeric Coating and the Magnetic Properties of Cobalt-Based Amorphous Alloys
This paper presents the results of an investigation of the influence of the polymeric coating used in the course of the production of magnetic shields and conditions necessary for its...
- 1 October 2018
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 933, 330-336
Energy Absorbing Properties of the Cellular Structures with Different Wall Thickness, Produced by the Selective Laser Melting
Production of the honeycomb or thin walled structures by the selective laser melting of powder is of a great scientific and practical interest. It’s because that such approach allows producing structures practically of any configuration and thickness, unobtainable or very hard to produce by traditional methods. Using the additive technology, the principal difference from the traditional is that the honeycomb structures can be produced practically of any shape, and the method itself is 100% waste-free, because there is no need in supporting structures. The results of the structure investigation of the honeycomb structures with the wall thickness of 80-170 μm and 44 mm height are presented along with the correlation dependencies between samples mass, wall thickness, activation and compression loads.
- 1 October 2018
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 933, 330-336
Energy Absorbing Properties of the Cellular Structures with Different Wall Thickness, Produced by the Selective Laser Melting
Production of the honeycomb or thin walled structures by the selective laser melting of powder is of a great scientific and practical interest. It’s because that such approach allows producing structures practically of any configuration and thickness, unobtainable or very hard to produce by traditional methods. Using the additive technology, the principal difference from the traditional is that the honeycomb structures can be produced practically of any shape, and the method itself is 100% waste-free, because there is no need in supporting structures. The results of the structure investigation of the honeycomb structures with the wall thickness of 80-170 μm and 44 mm height are presented along with the correlation dependencies between samples mass, wall thickness, activation and compression loads.
- 1 September 2018
- Published by Springer Nature in Metal Science and Heat Treatment
- Vol. 60 (5-6) , 387-392
Effect of the Chemical Composition of Powder Stock on the Strength of Materials After Selective Laser Melting
- 1 September 2018
- Published by Springer Nature in Metal Science and Heat Treatment
- Vol. 60 (5-6) , 387-392
Effect of the Chemical Composition of Powder Stock on the Strength of Materials After Selective Laser Melting