SDSamaresh Das

Samaresh Das

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Samaresh Das has a total of 297 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Dual-Split Charge-Layer Engineering for Enhanced Low-Bias Sensing Performance of InGaAs/InP SAGCM SPADs

    by Smita Srivastava, Vikash Sharma, Prabal Dweep Khanikar, Ankur Gupta, Samaresh Das

  • Advances in Perovskite Field‐Effect Phototransistors: Materials, Interface, and Device Performance

    by Sandeep Kaushik, Shafali Ruhil, Arjun Singh, Samaresh Das, Pawan Kumar

    The creation of phototransistors based on perovskite field‐effect transistors (PFETs) represents an attractive option for the development of better optoelectronic devices due to the capability for solution processing, an adjustable bandgap, and excellent charge transport properties. The incorporation of organic/inorganic perovskite semiconductors into a field‐effect transistor architecture yields highly responsive, low‐noise, and gate‐controllable photodetectors. This review summarizes key areas of development for PFETs, including perovskite material systems, device structures, interface engineering strategies, and performance metrics. A detailed discussion of the mechanisms of carrier photogeneration, transport, trapping, and recombination is also provided, along with a summary of engineering strategies to broaden the spectral response through bandgap tuning and heterostructures. Although significant progress has been made in the development of PFETs, major technical issues associated with the long‐term stability of PFETs, hysteresis, and the scalability of PFETs over large areas continue to pose significant challenges for their practical use. Potential applications for PFETs in photodetection, imaging, sensing, and fully integrated optoelectronic circuit designs are discussed along with general thoughts on the research direction in this area.

  • Self‐Powered FAPbI 3 Perovskite Quantum Dot Photodetector With Fast Response and Wide Linear Dynamic Range

    by Prabal D. Khanikar, Shanshan Ding, Atul Shukla, Taras Plakhotnik, Peng Chen, Samaresh Das, Lianzhou Wang, Shih‐Chun Lo, Ebinazar B. Namdas

    Perovskite quantum dots (PQD) are emerging as promising materials for photodetector technology due to their exceptional optical and electrical properties and ease of solution processability. However, their practical deployability is hindered by their limited linear photocurrent response and slow response speed needed for real‐world applications. In this work, we investigate formamidinium lead triiodide (FAPbI 3 ) PQD‐based photodetectors, focusing on enhancing their performance for practical applications. The ligand‐functionalized FAPbI 3 PQD‐based photodetector showcased excellent performance with a remarkable linear dynamic range (LDR) of 181 dB and a fast response speed of 260 ns. The device exhibits excellent responsivity of 377 mA W −1 and specific detectivity of 2.9 × 10 12 Jones due to uniform and compact film morphology and improved carrier transport. In addition, a −3 dB cut‐off frequency of 128 kHz is achieved, primarily limited by the slow‐decaying tail of the TPC signal. This study demonstrates meaningful progress in perovskite QD photodetector technology, reinforcing their promise for next‐generation optoelectronic systems.


  • CsPbBr3/p-Si membrane heterojunction photodiode: Photodetection characteristics and C-V analysis

    by Akash Kumar Sahu, Shaona Bose, Sudarshan Singh, Baidyanath Roy, Samaresh Das, Samit K. Ray

    We report the fabrication and physical characterization of a self-driven heterojunction photodetector based on an all-inorganic CsPbBr3 thin film interfaced with a lightweight, freestanding p-type single-crystal silicon membrane (p-Si). Different from conventional rigid substrates, this membrane-based architecture leverages the superior carrier mobility and mechanical resilience of monocrystalline silicon for flexible, high-sensitivity optoelectronics. Beyond standard characterization, an Elliott-type quantum well model was employed to resolve the excitonic nature of the CsPbBr3 nanocrystals, revealing a significant exciton binding energy of 340 meV and a quasi-particle bandgap of 2.91 eV. Under zero-bias conditions, the device exhibits a robust broadband response with a peak responsivity of 0.1 A/W and a detectivity of 1.75×1011 Jones. Crucially, the strong built-in potential (Vbi = 0.91 V) facilitates efficient exciton dissociation, overcoming Coulombic attraction even at zero bias to enable high performance self-powered operation. To elucidate the underlying transport physics, we conduct an in-depth study of the frequency-dispersive capacitance-voltage (C-V) characteristics. Our study reveals how interface states and deep-level defects dictate the steady-state photocurrent and transient kinetics (~130 ms). C-V analysis further enabled the quantification of the interface trap density (Dit ~ 1011 eV-1cm-2), confirming significant interfacial defect contributions to the non-ideal device behaviour. By employing a modified depletion approximation (MDA) incorporating the diode ideality factor (ν), we decouple parasitic trap-assisted processes from the intrinsic junction capacitance to resolve a precise Vbi of 0.91 V. This rigorous analytical approach provides critical insights into the non-ideal junction physics governing the performance of self-powered, membrane-based perovskite optoelectronics.

  • Open Access

    Nanoscale cathodoluminescence probing of neutral and charged excitons with tunable photo-capacitance in RIE-thinned WSe2

    by Kajal Sharma, Abir Mukherjee, Biswarup Satpati, Dhiman Mallick, Samaresh Das

    This study presents the thickness-dependent excitonic physics of WSe2 achieved through a precisely controlled reactive ion etching (RIE) process, enabling deterministic thinning from 40 layers down to ten layers on SiO2/Si substrate. This deterministic thickness engineering facilitates a systematic exploration of layer-dependent electronic and optical properties. Detailed Comprehensive characterization confirms the structural integrity, surface uniformity, and stable work-function profile of the etched films. Cathodoluminescence (CL) spectroscopy reveals pronounced band-edge emission features, including neutral and charged excitons, in the ultra-thin regions of the film. Possible transitions from the calculated band structures for varying thin layered WSe2 are estimated by performing density functional theory with correlation of emissions via CL spectroscopy. To evaluate device characteristics, a metal–oxide–semiconductor structure fabricated on the RIE-thinned WSe2 exhibits strong thickness-dependent photo-capacitance, where thicker sections show enhanced photo-response and improved electron inversion even at high frequencies. Low-temperature C–V measurements further highlight robust photoinduced inversion behavior with wide range of probe frequency ∼ 10 kHz to 10 MHz. Overall, this work establishes RIE as a reliable approach for achieving thickness-tailored, high-quality WSe2 suitable for device integration. The combined excitonic physics and tunable photo-capacitance underline its potential for next-generation optoelectronic platforms, including quantum emitters, spin-selective excitonic devices, and quantum photonic architectures.

  • Resonance based Object Sensing System for Soft Robotic Skin in Human Cooperative Robots

    by Vikas Kumar, Shivansh Awasthi, Vikash Sharma, Santosh Parajuli, Samaresh Das, Thomas George Thundat, Ankur Gupta

    This paper presents a resonance-based object sensing system (ROSS) for soft robotic skin applications to enhance human safety in human cooperative robots (HCRs). The proposed system utilizes the single-conductor power transfer (SCPT) methodology, enabling the ROSS coil to be integrated into the soft skin of robotic arm end effectors or fingers while operating with minimal power consumption (-16 to -56 dBm). The ROSS coil provides passive voltage gain due to its high quality factor (Q > 550). During human interaction with the soft skin of ROSS, it operates at 1.4 MHz and functions at its self-resonant frequency (SRF) in the radio-frequency (RF) band. The DC output from the passive RF-DC converter circuit remains sufficiently high after conversion losses and can be directly interfaced with a microcontroller unit (MCU) for real-time testing of the ROSS. The ROSS responds by varying its DC output voltage depending on the type of object in contact, including insulating and conducting materials, as well as humans. It also differentiates the nature of interaction, such as gentle human touch and higher applied force (≥21 N) exerted by the human hand on the soft skin of the ROSS. This design shows potential to enhance both safety and selectivity when integrated into the soft skin of robotic arm end effectors or fingers for future industrial HCR applications.

  • Crossover From Three‐Dimensional to Two‐Dimensional Superconducting Regime in VN Thin Films

    by Anish Mahavir Bhargav, Prasanta Kumar Muduli, Swati Kumari, Rajeev Sharma, Divya Prakash, Jai Tawale, Dinesh Dixit, Rajib Kumar Rakshit, Manju Singh, J. C. Biswas, et al.

    Advancing superconducting quantum technology necessitates the development of novel superconducting materials. Transition metal nitrides (TMNs) stand ou as promising superconductors due to their inherent stability, particularly against oxidation, and their relatively high superconducting critical temperatures (). While TMNs like NbN, TiN, and NbTiN have been extensively investigated for superconducting applications, vanadium nitride (VN) remains comparatively underexplored. Here, we address this knowledge gap by examining the evolution of superconductivity in VN thin films as their thickness is systematically reduced, focusing on the transition from a 3D to a 2D regime. We report the successful growth of high‐quality VN thin films with thicknesses ranging from 7.5 to 50 nm on single‐crystalline MgO (001) substrates. All VN thin films exhibited a sharp normal‐to‐superconducting transition, with critical temperatures ranging from 5.4 to 9.5 K. The monotonic decrease in and the broadening of the superconducting transition observed in thinner VN films is attributed to an increased level of disorder, as supported by structural and resistivity measurements. To investigate the superconducting behavior in detail, we performed resistivity measurements under isothermal and isomagnetic conditions with the magnetic field applied perpendicular to the film plane. Our analysis of the temperature‐dependent upper critical fields, using the Ginzburg–Landau (G–L) model and Werthamer‐Helfand‐Hohenberg (WHH) models, strongly supports the transition to quasi‐2D superconductivity in the 7.5 nm VN film. Furthermore, we conclude that orbital pair breaking is the primary factor limiting the upper critical field in VN films thicker than 7.5 nm under an out‐of‐plane magnetic field, while spin‐paramagnetic pair breaking may become significant in the 7.5 nm VN film below 1 K. Additionally, the current–voltage characteristics showed signatures of a Berezinski‐Kosterlitz‐Thouless (BKT) transition, providing further evidence for quasi‐2D superconductivity in VN thin films with thicknesses below 7.5 nm. This study provides crucial insights into the superconducting properties of VN thin films as their thickness approaches the ultrathin limit and will serve as a valuable guide for the fabrication of VN thin film‐based quantum devices.

  • Open Access

    Optical sensing performance and electrostatic reliability of silicon nanowire reconfigurable phototransistors

    by Vikash Sharma, Nitish Kumar, Ankur Gupta, Samaresh Das

    This work presents, for the first time, a rigorous investigation of the optical sensing performance and design of silicon nanowire (Si-NW) reconfigurable phototransistors (RPTs) over a broadband wavelength range spanning the ultraviolet (UV), visible, and near-infrared (NIR) regions. To study the design of these RPT devices, a well-calibrated simulation framework is developed under both dark and illuminated conditions to evaluate and compare the electronic, transfer, transient, and optical characteristics for p-type and n-type operations. The baseline device exhibits a peak responsivity of 180 mA/W and a photosensitivity of 5 × 104 within the UV and visible spectral ranges. The impact of temperature on optical sensing performance was also investigated, demonstrating excellent thermal stability and reliable sensing capability under harsh environmental conditions. The reliability of optical sensing performance and electrostatic behavior is further evaluated by adjusting the gate overlap positions of the control and program gates on the nanowire channel, while keeping the original physical process parameters. The influence of control and program gate positions is analyzed through energy band diagrams, carrier density profiles, responsivity, and dark current characteristics. Optimal gate placements are identified to enhance photo-absorption without adversely affecting the dark-state transfer characteristics or the physical baseline device dimensions. With optimized control and program gate positions, a peak responsivity of 315 mA/W is achieved, representing an enhancement of ∼1.8× while maintaining reliable electrostatic behavior of the RPT devices. This single device demonstrates reliable operation in both polarities (n-type and p-type), enabling simplified integration into silicon photonic platforms and reducing the need for separate complementary detector structures. Thus, this study establishes a promising foundation for integrating Si-NW RPT into advanced CMOS-compatible on-chip photonic platforms targeting UV, visible, and NIR wavelength detection.


  • On-Chip Prediction of Combination Drug Efficacy Using a Magnetofluidic Platform with Integrated Capacitive Sensors

    by Vinit Kumar Yadav, Preetha Ganguly, Samaresh Das, Prashant Mishra, Dhiman Mallick

    Automated and rapid combination drug screening using lab-on-a-chip platforms could benefit significantly from real-time trials for effective dose identification and optimization without human involvement, while decreasing the tedious pipetting procedures and measuring errors. Most reported platforms focus on individual drug testing using a significantly high number of volume-based compartments, complicating dose detection and imposing the handling of large samples. Meanwhile, probing the efficacy of combination drugs remains largely at its inception. To address such challenges efficiently, we propose a compact magnetically regulated microfluidic (MRM) platform with integrated interdigitated electrode-based capacitive sensors. The device design comprises 3 inlets, each paired with a staircase-configured patterned magnet that directs flow into 5 dispersion microchannels per inlet─yielding a total of 15 microchannels independently routed to 5 outlet wells. Such an inlet-to-outlet architecture mimics a multiplex-demultiplex configuration, with isolated dispersion microchannels that prevent cross-contamination prior to collection at the outlet wells. It is experimentally demonstrated that clinically relevant concentrations (10-485 μg mL-1) of different magnetically coated drug combinations can be sorted rapidly within the five wells of the designed device, and the delivered doses are quantified using the integrated sensor interface. Such unique concentration variation is attributed to the localized magnetic field-induced deflection of the magnetically tagged drugs in the predefined microchannel regions of the device, controlled by tuning the flow rate in the range of 0.9-2 μL min-1. Human breast cancer cells (MCF-7) are cultured in these specifically designed wells to probe the efficacy of exposure to several drug combinations, including Curcumin, Paclitaxel, and Quercetin. Using the developed platform, we identified the most efficacious drug combinations, including the appropriate concentration and ratio that cytotoxically affected these cells. Also, the collected data sets are used in an OLS (Ordinary Least Squares) regression model to predict the drug efficacy in test samples, which allows for the reduction of iterative on-chip experiments while reducing cost and conserving precious reagents.