Yong Sang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yong Sang has a total of 64 co-authors. Here are the top co-authors by number of shared publications:
Fuhai Duan
School of Mechanical Engineering, State Key Laboratory of High-Performance Precision Manufacturing, Dalian University of Technology, Dalian, China
12 shared publicationsJianlong Zhao
Dalian University of Technology, School of Mechanical Engineering, Dalian, China
10 shared publicationsWeiqi Sun
School of Mechanical Engineering, Dalian University of Technology, Dalian, China
6 shared publicationsLianjie Liao
State Key Laboratory of High-Performance Precision Manufacturing, Dalian University of Technology , Dalian, Liaoning 116024
5 shared publicationsLuming Jiang
State Key Laboratory of High-Performance Precision Manufacturing, Dalian University of Technology, Dalian, China
5 shared publications- Lianjie Liao
State Key Laboratory of High-performance Precision Manufacturing, Dalian University of Technology, 116023 Dalian, People’s Republic of China
4 shared publications
Latest Publications
- 1 November 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (11)
Multimodal acoustic impedance and piston loading in a locally excited hydraulic-cylinder cavity
Localized high-frequency inlet excitation in large hydraulic cylinders can generate multidimensional pressure fields that depart from the cross-sectionally uniform behavior assumed in lumped-compliance and one-dimensional water-hammer models. This study develops a closed-form hydroacoustic formulation for multimodal propagation and piston-coupled loading in a finite, rigid-walled cylindrical cavity. The pressure field is expanded in axisymmetric Bessel modes, with modal amplitudes determined from a localized incident volumetric source, complex inlet-end reflection, and a moving rigid piston. The formulation yields the pressure field, source-induced blocked force, acoustic dynamic stiffness, and incident-source-to-piston-velocity transfer function. Axisymmetric finite-element benchmarks show close numerical agreement: at the representative benchmark condition, the fully reflecting case gives full-field and piston-face amplitude errors of 0.4866% and 0.005 74%, respectively, while the median piston-face L2 error over 34 frequency-resolved and position-resolved cases is 0.005 28%. The results distinguish radial cutoff, finite-cavity acoustic resonance, and coupled piston-response resonance. Reflection magnitude governs resonant amplification, reflection phase shifts resonance locations, and piston position modifies modal phase accumulation and acoustic loading. Higher-order modes remain important for local pressure nonuniformity despite their vanishing net-force contribution on an ideal full-face piston, while below-cutoff evanescent components remain influential over finite distances. Sensitivity analyses show that effective sound speed and piston mass mainly shift characteristic frequencies, source localization controls higher-order modal content, and acoustic loss and mechanical damping primarily regulate resonance amplitude and bandwidth. These results provide a physically interpretable framework that links inlet, cavity, and mechanical parameters to multimodal pressure redistribution and the piston-coupled response.
- 1 November 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (11)
Multimodal acoustic impedance and piston loading in a locally excited hydraulic-cylinder cavity
Localized high-frequency inlet excitation in large hydraulic cylinders can generate multidimensional pressure fields that depart from the cross-sectionally uniform behavior assumed in lumped-compliance and one-dimensional water-hammer models. This study develops a closed-form hydroacoustic formulation for multimodal propagation and piston-coupled loading in a finite, rigid-walled cylindrical cavity. The pressure field is expanded in axisymmetric Bessel modes, with modal amplitudes determined from a localized incident volumetric source, complex inlet-end reflection, and a moving rigid piston. The formulation yields the pressure field, source-induced blocked force, acoustic dynamic stiffness, and incident-source-to-piston-velocity transfer function. Axisymmetric finite-element benchmarks show close numerical agreement: at the representative benchmark condition, the fully reflecting case gives full-field and piston-face amplitude errors of 0.4866% and 0.005 74%, respectively, while the median piston-face L2 error over 34 frequency-resolved and position-resolved cases is 0.005 28%. The results distinguish radial cutoff, finite-cavity acoustic resonance, and coupled piston-response resonance. Reflection magnitude governs resonant amplification, reflection phase shifts resonance locations, and piston position modifies modal phase accumulation and acoustic loading. Higher-order modes remain important for local pressure nonuniformity despite their vanishing net-force contribution on an ideal full-face piston, while below-cutoff evanescent components remain influential over finite distances. Sensitivity analyses show that effective sound speed and piston mass mainly shift characteristic frequencies, source localization controls higher-order modal content, and acoustic loss and mechanical damping primarily regulate resonance amplitude and bandwidth. These results provide a physically interpretable framework that links inlet, cavity, and mechanical parameters to multimodal pressure redistribution and the piston-coupled response.
- 4 August 2026
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 35 (41) , 42854-42865
Aging Life Prediction of Multi-Size Rubber O-Rings Based on Compression Stress Relaxation
- 4 August 2026
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 35 (41) , 42854-42865
Aging Life Prediction of Multi-Size Rubber O-Rings Based on Compression Stress Relaxation
- 13 June 2026
- Published by Springer Nature in Journal of Vibration Engineering & Technologies
- Vol. 14 (6)
A Regularization-Based Motion Reconstruction Method for Rank-Deficient Shaking Tables
- 13 June 2026
- Published by Springer Nature in Journal of Vibration Engineering & Technologies
- Vol. 14 (6)
A Regularization-Based Motion Reconstruction Method for Rank-Deficient Shaking Tables
- 21 May 2026
- Published by SAGE Publications in Transactions of the Institute of Measurement and Control
Adaptive compensation control for ultra-large-inertia shaking tables based on motion-trend deviation
Ultra-large-inertia shaking table systems exhibit strong nonlinear disturbances, low damping, and extremely large equivalent mass, which significantly degrade control accuracy. To address these issues, this paper proposes an adaptive compensation control method based on generalized motion-trend deviation. First, a dual-channel state prediction method is developed by adaptively fusing a dynamics model channel for physical consistency with an online data-driven channel for localized nonlinearities via a dynamic confidence mechanism. Second, an online compensation controller using a Radial Basis Function neural network is designed to mitigate residual errors based on this deviation, which quantifies the dynamic mismatch between the inertial reference trajectory and the actual system response. Simulation and experimental results demonstrate that the proposed method effectively suppresses waveform distortion induced by friction and backlash. Compared with conventional controllers, the framework achieves a 33% reduction in maximum tracking error. The proposed strategy isolates nominal inertial dynamics from dissipative forces, providing a robust and proactive compensation structure for ultra-large shaking tables, although its application to multi-axis decoupling remains a subject for future research.
- 21 May 2026
- Published by SAGE Publications in Transactions of the Institute of Measurement and Control
Adaptive compensation control for ultra-large-inertia shaking tables based on motion-trend deviation
Ultra-large-inertia shaking table systems exhibit strong nonlinear disturbances, low damping, and extremely large equivalent mass, which significantly degrade control accuracy. To address these issues, this paper proposes an adaptive compensation control method based on generalized motion-trend deviation. First, a dual-channel state prediction method is developed by adaptively fusing a dynamics model channel for physical consistency with an online data-driven channel for localized nonlinearities via a dynamic confidence mechanism. Second, an online compensation controller using a Radial Basis Function neural network is designed to mitigate residual errors based on this deviation, which quantifies the dynamic mismatch between the inertial reference trajectory and the actual system response. Simulation and experimental results demonstrate that the proposed method effectively suppresses waveform distortion induced by friction and backlash. Compared with conventional controllers, the framework achieves a 33% reduction in maximum tracking error. The proposed strategy isolates nominal inertial dynamics from dissipative forces, providing a robust and proactive compensation structure for ultra-large shaking tables, although its application to multi-axis decoupling remains a subject for future research.
- 6 February 2026
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 37 (5) , 056202
A novel internal force decoupling control algorithm under varying eccentric loads in vertically redundant shaking tables
Large-scale vertically redundant shaking tables are critical for indoor structural testing, yet internal forces within the system have long been regarded as redundant. However, decoupling internal forces becomes highly complex and challenging as the position and weight of the load/specimen vary. In this study, the spherical hinge is modeled as a spring–damper system, and a general force coupling model—incorporating mechanical, geometric, and deformation coupling—is proposed by considering the load’s position and mass. A novel descending internal force (DIF) algorithm based on the matrix form of the force coupling model is then proposed, and its effectiveness is validated by simulation. Finally, validation experiments with varying eccentric loads were conducted on a scaled model, an electric shaking table. The results show that the maximum error of the proposed coupling model is within 3.2%. The DIF algorithm can significantly reduce internal forces, from [141.0, −142.6, 145.6, −144.5 ] T N to [−1.9, 1.5, 1.6, −0.4] T N. The proposed method achieves decoupling of internal forces in vertically redundant mechanisms under varying eccentric loads, enjoying the advantages of high accuracy, high efficiency, and rapid response.
- 6 February 2026
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 37 (5) , 056202
A novel internal force decoupling control algorithm under varying eccentric loads in vertically redundant shaking tables
Large-scale vertically redundant shaking tables are critical for indoor structural testing, yet internal forces within the system have long been regarded as redundant. However, decoupling internal forces becomes highly complex and challenging as the position and weight of the load/specimen vary. In this study, the spherical hinge is modeled as a spring–damper system, and a general force coupling model—incorporating mechanical, geometric, and deformation coupling—is proposed by considering the load’s position and mass. A novel descending internal force (DIF) algorithm based on the matrix form of the force coupling model is then proposed, and its effectiveness is validated by simulation. Finally, validation experiments with varying eccentric loads were conducted on a scaled model, an electric shaking table. The results show that the maximum error of the proposed coupling model is within 3.2%. The DIF algorithm can significantly reduce internal forces, from [141.0, −142.6, 145.6, −144.5 ] T N to [−1.9, 1.5, 1.6, −0.4] T N. The proposed method achieves decoupling of internal forces in vertically redundant mechanisms under varying eccentric loads, enjoying the advantages of high accuracy, high efficiency, and rapid response.
- 10 September 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 239 (22) , 9073-9087
An inverse model control method based on signal filtering and BP neural network to improve performance of electric servo cylinder system
The electric servo cylinder (ESC) serves as the actuator for the vibration tables and load simulators. However, nonlinear factors inherent to the ESC system, including friction and clearance, consistently constrain the performance of the system and introduce errors in experimental results. To improve the high frequency response performance of this system under the influence of nonlinear factors, a real-time inverse model control method is designed in this paper. Firstly, the least squares method (LSM) is introduced to adaptively merge the wavelet filtered signal with the original signal, and the discrete wavelet transform is utilized to zero high-frequency detail components to eliminate noise in order to increase signal accuracy. Besides, an adaptive variable step size inverse model control law based on BP neural networks (WLSM-VSS-BPLC) is developed due to the nonlinearity and uncertainty present in the ESC system model. A BP neural network is used by the controller to identify the inverse model in real-time. Meanwhile, an adaptive variable step size strategy is proposed to achieve rapid identification of the inverse model. In conclusion, theoretical analysis and experimental results demonstrate that the WLSM filter effectively reduces noise across diverse types of noise signals. And the WLSM-VSS-BPLC controller enhances both the tracking accuracy and cut-off frequency of the ESC system.
- 10 September 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 239 (22) , 9073-9087
An inverse model control method based on signal filtering and BP neural network to improve performance of electric servo cylinder system
The electric servo cylinder (ESC) serves as the actuator for the vibration tables and load simulators. However, nonlinear factors inherent to the ESC system, including friction and clearance, consistently constrain the performance of the system and introduce errors in experimental results. To improve the high frequency response performance of this system under the influence of nonlinear factors, a real-time inverse model control method is designed in this paper. Firstly, the least squares method (LSM) is introduced to adaptively merge the wavelet filtered signal with the original signal, and the discrete wavelet transform is utilized to zero high-frequency detail components to eliminate noise in order to increase signal accuracy. Besides, an adaptive variable step size inverse model control law based on BP neural networks (WLSM-VSS-BPLC) is developed due to the nonlinearity and uncertainty present in the ESC system model. A BP neural network is used by the controller to identify the inverse model in real-time. Meanwhile, an adaptive variable step size strategy is proposed to achieve rapid identification of the inverse model. In conclusion, theoretical analysis and experimental results demonstrate that the WLSM filter effectively reduces noise across diverse types of noise signals. And the WLSM-VSS-BPLC controller enhances both the tracking accuracy and cut-off frequency of the ESC system.
- 2 September 2025
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 47 (11) , 1-17
Nonlinear mathematical modeling and hierarchical decoupling control for extremely large inertia multi-axis shaking table
- 2 September 2025
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 47 (11) , 1-17
Nonlinear mathematical modeling and hierarchical decoupling control for extremely large inertia multi-axis shaking table
- 26 January 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol. 239 (14) , 7013-7027
A variable speed-displacement control with virtual load sensing structure for energy conservation of positive flow excavator
In this paper, a variable speed-displacement control with virtual load sensing structure is proposed to reduce the energy loss caused by the difference between supply and demand while ensuring that the engine is at its optimal economic operating point. The virtual load sensing structure is implemented by the controller to distribute the output of the positive flow pumps to adjust the operating point of the engine and maintain the original maneuverability of the excavator. The energy-saving control parameters of the positive flow excavator are determined based on the experiment and the mathematical models are built to analyze the energy coupling between critical components. The simulation and the experimental results show that the proposed control strategy can maximize the energy efficiency without adding any energy storage devices, which reduces the energy consumption by 4.8%–12.19% under different load pressure conditions for the XCMG XE215 type positive flow excavator.
- 26 January 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol. 239 (14) , 7013-7027
A variable speed-displacement control with virtual load sensing structure for energy conservation of positive flow excavator
In this paper, a variable speed-displacement control with virtual load sensing structure is proposed to reduce the energy loss caused by the difference between supply and demand while ensuring that the engine is at its optimal economic operating point. The virtual load sensing structure is implemented by the controller to distribute the output of the positive flow pumps to adjust the operating point of the engine and maintain the original maneuverability of the excavator. The energy-saving control parameters of the positive flow excavator are determined based on the experiment and the mathematical models are built to analyze the energy coupling between critical components. The simulation and the experimental results show that the proposed control strategy can maximize the energy efficiency without adding any energy storage devices, which reduces the energy consumption by 4.8%–12.19% under different load pressure conditions for the XCMG XE215 type positive flow excavator.
- 21 October 2024
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 239 (3) , 643-658
Research on position tracking control of electro-hydraulic actuator system combining feedforward inverse model controller and exponential functional link network adaptive controller
The electro-hydraulic actuator system plays a crucial role in indoor high-frequency simulation experiments. Many components of the system exhibit unavoidable nonlinear characteristics, which reduce its dynamic position response capability. Additionally, most algorithms are unsuitable for practical high-frequency conditions due to either local instability or high computational complexity. To improve position tracking accuracy under high-frequency control, a novel combined control strategy is proposed, integrating an appropriate feedforward inverse model controller (FFIMC) with an exponential functional link network adaptive controller (EFLNAC). Initially, the system has reached a stable state under the action of the PID controller. Subsequently, the FFIMC estimates both the model and the inverse model of the PID system by applying the AIC technique developed through the DCT-VSSNLMS adaptive algorithm, which extends the system’s bandwidth. Following this, the EFLNAC, as the outermost loop, acquires the inverse model of the FFIMC system and updates internal parameters in real-time, thereby enhancing the system’s resistance to nonlinear disturbances. Finally, the combined controller is validated through simulations and experiments under various working conditions. The results show a significant increase in the PID system’s bandwidth and demonstrate that the tracking error of the signal is maintained within 0.079 mm. Therefore, the combined controller proves to be an effective solution for high-precision, high-frequency displacement tracking, offering the advantages of low computational complexity, high accuracy, and strong effectiveness.
- 21 October 2024
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 239 (3) , 643-658
Research on position tracking control of electro-hydraulic actuator system combining feedforward inverse model controller and exponential functional link network adaptive controller
The electro-hydraulic actuator system plays a crucial role in indoor high-frequency simulation experiments. Many components of the system exhibit unavoidable nonlinear characteristics, which reduce its dynamic position response capability. Additionally, most algorithms are unsuitable for practical high-frequency conditions due to either local instability or high computational complexity. To improve position tracking accuracy under high-frequency control, a novel combined control strategy is proposed, integrating an appropriate feedforward inverse model controller (FFIMC) with an exponential functional link network adaptive controller (EFLNAC). Initially, the system has reached a stable state under the action of the PID controller. Subsequently, the FFIMC estimates both the model and the inverse model of the PID system by applying the AIC technique developed through the DCT-VSSNLMS adaptive algorithm, which extends the system’s bandwidth. Following this, the EFLNAC, as the outermost loop, acquires the inverse model of the FFIMC system and updates internal parameters in real-time, thereby enhancing the system’s resistance to nonlinear disturbances. Finally, the combined controller is validated through simulations and experiments under various working conditions. The results show a significant increase in the PID system’s bandwidth and demonstrate that the tracking error of the signal is maintained within 0.079 mm. Therefore, the combined controller proves to be an effective solution for high-precision, high-frequency displacement tracking, offering the advantages of low computational complexity, high accuracy, and strong effectiveness.
- 1 October 2024
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 95 (10)
Development and testing of a novel vibratory compaction instrument considering its natural frequency
This study aims to develop a novel vibratory compaction instrument designed for the preparation of large triaxial soil specimens, offering an efficient alternative to the traditional manual specimen preparation process. However, when the motor frequency closely aligns with the natural frequency of the structure, severe resonance phenomena may occur. This paper employed finite element modal analysis, experimental modal analysis, and operational modal analysis techniques to conduct a multi-objective optimization of the structure, aiming to improve the dynamic characteristics. First, the natural frequency and mode shapes of the vibratory compaction instrument were determined via finite element technology. Subsequently, the optimization of this instrument was conducted by integrating the Kriging surrogate model with the Non-dominated Sorting Genetic Algorithm II (NSGA-II). Finally, the steel column underwent a modal test using impulse stimulation to ascertain its natural frequency, and the stochastic subspace identification (SSI) approach was employed to conduct an operational modal analysis of the vibratory compaction instrument to determine its modal characteristics. The experimental findings corroborated the conclusions obtained from the finite element analysis, validating the precision of the finite element modal analysis and the rationality of the optimized structure. The research results are of significant importance for improving the preparation efficiency of large triaxial specimen, contributing to advancements in soil mechanics testing.
- 1 October 2024
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 95 (10)
Development and testing of a novel vibratory compaction instrument considering its natural frequency
This study aims to develop a novel vibratory compaction instrument designed for the preparation of large triaxial soil specimens, offering an efficient alternative to the traditional manual specimen preparation process. However, when the motor frequency closely aligns with the natural frequency of the structure, severe resonance phenomena may occur. This paper employed finite element modal analysis, experimental modal analysis, and operational modal analysis techniques to conduct a multi-objective optimization of the structure, aiming to improve the dynamic characteristics. First, the natural frequency and mode shapes of the vibratory compaction instrument were determined via finite element technology. Subsequently, the optimization of this instrument was conducted by integrating the Kriging surrogate model with the Non-dominated Sorting Genetic Algorithm II (NSGA-II). Finally, the steel column underwent a modal test using impulse stimulation to ascertain its natural frequency, and the stochastic subspace identification (SSI) approach was employed to conduct an operational modal analysis of the vibratory compaction instrument to determine its modal characteristics. The experimental findings corroborated the conclusions obtained from the finite element analysis, validating the precision of the finite element modal analysis and the rationality of the optimized structure. The research results are of significant importance for improving the preparation efficiency of large triaxial specimen, contributing to advancements in soil mechanics testing.