Otto Todor-Boer has a total of 30 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Recent Strategies for Mitigating Degradation Mechanisms in Organic Solar Cells

    by Otto Todor-Boer, Rodolfo Llanos Lizcano, Cecilia Roman, Ioan Botiz

    Organic solar cells (OSCs) are attractive photovoltaic technologies due to their mechanical flexibility, low weight, and compatibility with low-cost solution processing. Power conversion efficiencies above 20% have recently been achieved, largely through the development of non-fullerene acceptors and improved control of bulk-heterojunction morphology. However, insufficient operational lifetime continues to limit commercialization. Performance losses arise from interconnected photoinduced, thermal, morphological, interfacial, environmental, and mechanical processes that are accelerated under realistic operating conditions involving light, heat, oxygen, and moisture. This review examines the principal mechanisms responsible for these changes, with particular attention to photo-oxidation, thermally driven morphological evolution, and interfacial chemical reactions. Stability trends in donor:fullerene, donor:non-fullerene, and all-polymer systems are compared to establish relationships between material composition, microstructure, and device durability. Recent mitigation strategies are then assessed, including molecular design of more stable materials, processing routes that suppress unfavorable morphological evolution, interface and device engineering, and advanced encapsulation. The review is organized around a mechanism-to-mitigation framework that connects molecular, morphological, and interfacial degradation processes with their photovoltaic consequences and the corresponding stabilization strategies across fullerene, non-fullerene, and all-polymer systems. Recent advances demonstrate that appropriately stabilized NFA-based systems can retain ≥85–90% of their initial efficiency for hundreds to thousands of hours under thermal stress, while optimized interfaces have enabled operational lifetimes exceeding several thousand hours under accelerated aging. Remaining challenges include standardized stability protocols, reliable lifetime prediction, and scalable architectures that retain performance under prolonged operation. Such a combined materials-morphology-interface perspective provides a framework for translating high OSC efficiencies into longer and more predictable device lifetimes.

  • Open Access

    Processing-Dependent Morphology and Photoluminescence Quenching in Donor–Acceptor PBDTTTPD:PNDI(2HD)2T Thin Films

    by Otto Todor-Boer, Bogdan-Ionuț Ștefan, Levente Máthé, Tudor Blaga, Ioan Botiz

    In this study, we investigate the impact of processing strategies on the nanoscale morphology and photophysical behavior of donor–acceptor thin films composed of the polymeric donor PBDTTTPD and the n-type acceptor PNDI(2HD)2T. The blend morphology and interfacial characteristics were systematically tuned using three distinct fabrication techniques: spin-coating, convective self-assembly, and space-confined solvent vapor annealing. Atomic force microscopy and photoluminescence spectroscopy were employed to elucidate structure–property correlations relevant to all-polymer optoelectronic systems. Films processed via convective self-assembly exhibited nanoscale features with extensive donor–acceptor intermixing, leading to the most efficient photoluminescence quenching of nearly 85%, indicative of enhanced exciton dissociation and charge transfer. In contrast, as-cast films displayed moderately mixed morphologies with approximately 81% quenching, serving as a reference state. The solvent vapor annealing method induced pronounced phase segregation and the formation of larger domains, resulting in reduced photoluminescence quenching efficiency of about 52%. These findings demonstrate that the nanoscale morphology, and consequently the photophysical response, of PBDTTTPD:PNDI(2HD)2T blends can be precisely tailored through processing, providing valuable design guidelines for all-polymer optoelectronic applications such as organic photovoltaics and field-effect transistors.

  • Open Access

    Controlling the morphology of organic donor–Acceptor films for enhanced optoelectronic properties

    by Otto Todor-Boer, Bogdan-Ionuț Ștefan, Levente Máthé, Cerasel Vărăticeanu, Ioan Botiz


  • Open Access

    An Evaluation of Mercury Accumulation Dynamics in Tree Leaves Growing in a Contaminated Area as Part of the Ecosystem Services: A Case Study of Turda, Romania

    by Marin Senila, Cerasel Varaticeanu, Simona Costiug, Otto Todor-Boer

    Mercury (Hg) poses a significant threat to human health and ecosystems, garnering increased attention in environmental studies. This paper evaluates the dynamics of Hg accumulation in various common tree leaves, specifically white poplar, linden, and cherry plum, throughout their growing season. The findings offer valuable insights into air quality and the ability of urban vegetation to mitigate mercury pollution in urban areas. A case study was conducted in Turda, a town in northwestern Romania, where a former chlor-alkali plant operated throughout the last century. Although the plant ceased its electrolysis activities over 25 years ago, the surrounding soil remains contaminated with mercury (Hg) due to the significant amounts released during its operation. The results indicated that the Hg concentration varied between 2.4 and 7.3 mg kg−1 dry weight (dw), exceeding the intervention threshold for soil of 2.0 mg kg−1. Additionally, the Hg content in the leaf samples consistently increased over time, influenced by leaf age and tree species. The Hg content increased in the following order: cherry plum < white poplar < linden. On average, white poplar leaves accumulated 72 ng Hg g−1 dw, linden leaves 128 ng Hg g−1 dw, and cherry plum leaves 47 ng Hg g−1 dw during the six-month monitored period from April to September. The results obtained can be used to evaluate the potential of different tree species for mitigating atmospheric Hg contamination and to elaborate on the suitable management of fallen leaves in the autumn.


  • Open Access

    Visualization of Single Polymer Chains with Atomic Force Microscopy: A Review

    by Maria Pop, Otto Todor-Boer, Ioan Botiz

    Single-chain atomic force microscopy has emerged as a powerful and highly specialized technique, enabling the direct observation and analysis of various isolated polymer chains at the nano and micro scales. This work reviews the most relevant experimental cases utilizing this technique, aiming to shine light on the understanding of the physical appearance of freshly synthesized polymer chains, reveal unique chain conformations and related transitions, decipher the processes of polymer crystallization and self-assembly, study the mechanisms of polymer adsorption and desorption, observe the formation of single-chain nanoparticles, and explore many other related phenomena.


  • Open Access

    Large Enhancement of Photoluminescence Obtained in Thin Polyfluorene Films of Optimized Microstructure

    by Otto Todor-Boer, Cosmin Farcău, Ioan Botiz

    There is a clearly demonstrated relationship between the microstructure, processing and resulting optoelectronic properties of conjugated polymers. Here, we exploited this relationship by exposing polyfluorene thin films to various solvent vapors via confined-solvent vapor annealing to optimize their microstructure, with the final goal being to enhance their emission properties. Our results have demonstrated enlargements in photoluminescence intensity of up to 270%, 258% and 240% when thin films of polyfluorenes of average molecular weights of 105,491 g/mol, 63,114 g/mol and 14,000 g/mol, respectively, experienced increases in their β-phase fractions upon processing.


  • Open Access

    Processing of Thin Films Based on Cellulose Nanocrystals and Biodegradable Polymers by Space-Confined Solvent Vapor Annealing and Morphological Characteristics

    by Lacrimioara Senila, Ioan Botiz, Cecilia Roman, Dorina Simedru, Monica Dan, Irina Kacso, Marin Senila, Otto Todor-Boer

    L-poly(lactic acid), poly(3-hydroxybutyrate), and poly-hydroxybutyrate-co-hydroxyvalerate are biodegradable polymers that can be obtained from renewable biomass sources. The aim of this study was to develop three types of environmentally friendly film biocomposites of altered microstructure by combining each of the above-mentioned polymers with cellulose nanocrystal fillers and further processing the resulting materials via space-confined solvent vapor annealing. Cellulose was previously obtained from renewable biomass and further converted to cellulose nanocrystals by hydrolysis with the lactic acid. The solutions of biodegradable polymers were spin-coated onto solid substrates before and after the addition of cellulose nanocrystals. The obtained thin film composites were further processed via space-confined solvent vapor annealing to eventually favor their crystallization and, thus, to alter the final microstructure. Indeed, atomic force microscopy studies have revealed that the presence of cellulose nanocrystals within a biodegradable polymer matrix promoted the formation of large crystalline structures exhibiting fractal-, spherulitic- or needle-like morphologies.


  • Open Access

    Generation of Hybrid Lead Halide CH3NH3PbI3-xClx Perovskite Crystals via Convective Self-Assembly

    by Ioan Petrovai, Otto Todor-Boer, Adriana Vulpoi, Leontin David, Ioan Botiz

    In this study, we have employed a film deposition technique based on convective forces acting at the triple air–solution–substrate contact line to tune the rate of solvent evaporation and, thus, to exert control over the morphology of the resulting mixed lead halide perovskite CH3NH3PbI3-xClx films. By varying the speed of film deposition while processing at two different temperatures, perovskite crystals of various shapes and dimensions were generated upon the crystallization of the initial perovskite precursor ink. More precisely, longer than half a millimeter 3D needle-like perovskite crystals exhibiting sharp edges co-existing with large cross-like 3D perovskite crystals could only be obtained upon the slow deposition of films at a low sample processing temperature of 17 °C, i.e., under conditions of low solvent evaporation rate. On the contrary, the utilization of higher film deposition speeds and/or processing temperatures led to smaller 3D needle-like or quasi-2D rectangular perovskite crystals that often appeared interconnected and coalesced. Moreover, as it was revealed by the photoluminescence measurements, the emission intensity of perovskite crystals was larger and dominated by a shorter wavelength peak, as compared to the uncrystallized material that emitted much less light, but at a longer wavelength.


  • Open Access

    Crystallization of Poly(ethylene oxide)-Based Triblock Copolymers in Films Swollen-Rich in Solvent Vapors

    by Iulia Babutan, Otto Todor-Boer, Leonard Ionut Atanase, Adriana Vulpoi, Ioan Botiz

    In this study, we employed a polymer processing method based on solvent vapor annealing in a confined environment to swell-rich thin films of polybutadiene-b-poly(2-vinylpyridine)-b-poly(ethylene oxide) triblock copolymers and to promote their crystallization. As revealed by optical and atomic force microscopy, thin films of triblock copolymers containing a rather short crystalline poly(ethylene oxide) block that was massively obstructed by the other two blocks were unable to crystallize following the spin-casting process, and their further swelling in solvent vapors was necessary in order to produce polymeric crystals displaying a dendritic morphology. In comparison, thin films of triblock copolymers containing a much longer poly(ethylene oxide) block that was less obstructed by the other two blocks were shown to crystallize into dendritic structures right after the spin-casting procedure, as well as upon rich swelling in solvent vapors.


  • Open Access

    Self-Assembly of Block Copolymers in Thin Films Swollen-Rich in Solvent Vapors

    by Iulia Babutan, Otto Todor-Boer, Leonard Ionut Atanase, Adriana Vulpoi, Ioan Botiz

    In this study we have employed a polymer processing method based on solvent vapor annealing in order to condense relatively large amounts of solvent vapors onto thin films of block copolymers and thus to promote their self-assembly into ordered nanostructures. As revealed by the atomic force microscopy, a periodic lamellar morphology of poly(2-vinylpyridine)-b-polybutadiene and an ordered morphology comprised of hexagonally-packed structures made of poly(2-vinylpyridine)-b-poly(cyclohexyl methacrylate) were both successfully generated on solid substrates for the first time.