Mauricio De la Cruz-Ávila
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Mauricio De la Cruz-Ávila has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Ignacio Carvajal-Mariscal
IPN (Mexico)
7 shared publications - Jorge E. De León-Ruiz
Centro de Investigación en Materiales Avanzados, S.C., CIMAV, Miguel de Cervantes 120, Complejo Industrial Chihuahua, Chihuahua 31136, Mexico
5 shared publications - Jaime Klapp
Departamento de Física, Instituto Nacional de Investigaciones Nucleares (ININ), Carretera México-Toluca km. 36.5, La Marquesa, Ocoyoacac 52750, Mexico
4 shared publications - Rosanna Bonasia
School of Engineering and Sciences, Tecnologico de Monterrey, Carretera Lago de Guadalupe Km 3.5 Atizapán de Zaragoza Col. Margarita Maza de Juarez, Cd López Mateos 52926, Mexico
4 shared publications - Georgiy Polupan
Instituto Politécnico Nacional
3 shared publications - Eliseo Martinez-Espinosa
Instituto de Ingeniería, Universidad Nacional Autónoma de México
2 shared publications
Latest Publications
- Open Access
Toward a General Analytical Formulation for the Hydrodynamic Behavior of Tesla Valves
Tesla valves are passive hydraulic devices capable of producing directional flow resistance without moving components, making them attractive for applications in microfluidics, thermal systems, and high-reliability hydraulic circuits. Despite extensive experimental and numerical studies, an analytical formulation capable of describing the hydrodynamic behavior of Tesla valves under varying operating and geometric conditions remains limited. In this work, a comprehensive analytical model is developed to describe the pressure losses, flow redistribution, and diodicity behavior of Tesla valves through a physics-based formulation derived from conservation laws, dimensional analysis, and inertial scaling principles. The proposed model incorporates the influence of Reynolds number, flow partition, geometric ratios, branch inclination angle, and number of diode stages within a unified nonlinear framework. A closed structural equation is obtained that relates hydraulic losses and directional asymmetry to the internal geometry of the valve. The formulation reveals the existence of geometric and energetic constraints governing rectification efficiency, including bounds associated with stage number, channel scaling, and angular momentum exchange. The results show that Tesla valve performance emerges from a delicate balance between inertial amplification and dissipative mechanisms, providing an analytical framework for the design and optimization of Tesla-type hydraulic systems across multiple scales.
Open AccessToward a General Analytical Formulation for the Hydrodynamic Behavior of Tesla Valves
Tesla valves are passive hydraulic devices capable of producing directional flow resistance without moving components, making them attractive for applications in microfluidics, thermal systems, and high-reliability hydraulic circuits. Despite extensive experimental and numerical studies, an analytical formulation capable of describing the hydrodynamic behavior of Tesla valves under varying operating and geometric conditions remains limited. In this work, a comprehensive analytical model is developed to describe the pressure losses, flow redistribution, and diodicity behavior of Tesla valves through a physics-based formulation derived from conservation laws, dimensional analysis, and inertial scaling principles. The proposed model incorporates the influence of Reynolds number, flow partition, geometric ratios, branch inclination angle, and number of diode stages within a unified nonlinear framework. A closed structural equation is obtained that relates hydraulic losses and directional asymmetry to the internal geometry of the valve. The formulation reveals the existence of geometric and energetic constraints governing rectification efficiency, including bounds associated with stage number, channel scaling, and angular momentum exchange. The results show that Tesla valve performance emerges from a delicate balance between inertial amplification and dissipative mechanisms, providing an analytical framework for the design and optimization of Tesla-type hydraulic systems across multiple scales.
- Open Access
Enhanced 3D Turbulence Models Sensitivity Assessment Under Real Extreme Conditions: Case Study, Santa Catarina River, Mexico
This study compares enhanced turbulence models in a natural river channel 3D simulation under extreme hydrometeorological conditions. Using ANSYS Fluent 2024 R1 and the Volume of Fluid scheme, five RANS closures were evaluated: realizable k–ε, Renormalization-Group k–ε, Shear Stress Transport k–ω, Generalized k–ω, and Baseline-Explicit Algebraic Reynolds Stress model. A segment of the Santa Catarina River in Monterrey, Mexico, defined the computational domain, which produced high-energy, non-repeatable real-world flow conditions where hydrometric data were not yet available. Empirical validation was conducted using surface velocity estimations obtained through high-resolution video analysis. Systematic bias was minimized through mesh-independent validation (<1% error) and a benchmarked reference closure, ensuring a fair basis for inter-model comparison. All models were realized on a validated polyhedral mesh with consistent boundary conditions, evaluating performance in terms of mean velocity, turbulent viscosity, strain rate, and vorticity. Mean velocity predictions matched the empirical value of 4.43 [m/s]. The Baseline model offered the highest overall fidelity in turbulent viscosity structure (up to 43 [kg/m·s]) and anisotropy representation. Simulation runtimes ranged from 10 to 16 h, reflecting a computational cost that increases with model complexity but justified by improved flow anisotropy representation. Results show that all models yielded similar mean flow predictions within a narrow error margin. However, they differed notably in resolving low-velocity zones, turbulence intensity, and anisotropy within a purely hydrodynamic framework that does not include sediment transport.
Open AccessEnhanced 3D Turbulence Models Sensitivity Assessment Under Real Extreme Conditions: Case Study, Santa Catarina River, Mexico
This study compares enhanced turbulence models in a natural river channel 3D simulation under extreme hydrometeorological conditions. Using ANSYS Fluent 2024 R1 and the Volume of Fluid scheme, five RANS closures were evaluated: realizable k–ε, Renormalization-Group k–ε, Shear Stress Transport k–ω, Generalized k–ω, and Baseline-Explicit Algebraic Reynolds Stress model. A segment of the Santa Catarina River in Monterrey, Mexico, defined the computational domain, which produced high-energy, non-repeatable real-world flow conditions where hydrometric data were not yet available. Empirical validation was conducted using surface velocity estimations obtained through high-resolution video analysis. Systematic bias was minimized through mesh-independent validation (<1% error) and a benchmarked reference closure, ensuring a fair basis for inter-model comparison. All models were realized on a validated polyhedral mesh with consistent boundary conditions, evaluating performance in terms of mean velocity, turbulent viscosity, strain rate, and vorticity. Mean velocity predictions matched the empirical value of 4.43 [m/s]. The Baseline model offered the highest overall fidelity in turbulent viscosity structure (up to 43 [kg/m·s]) and anisotropy representation. Simulation runtimes ranged from 10 to 16 h, reflecting a computational cost that increases with model complexity but justified by improved flow anisotropy representation. Results show that all models yielded similar mean flow predictions within a narrow error margin. However, they differed notably in resolving low-velocity zones, turbulence intensity, and anisotropy within a purely hydrodynamic framework that does not include sediment transport.
- Open Access
- 4 September 2025
- Published by MDPI AG in Preprints.org
Enhanced 3D Turbulence Modeling Sensitivity Assessment for Real-World River Hydraulics Under Extreme Storm Conditions: A Case Study of the Santa Catarina River, Mexico
This study compares enhanced turbulence models in a natural river channel 3D simu-lation under extreme hydrometeorological conditions. Using ANSYS Fluent and the Volume of Fluid scheme, five RANS closures were evaluated: realizable k–ε, Renor-malization-Group k–ε, Shear Stress Transport k–ω, Generalized k–ω, and Base-line-Explicit Algebraic Reynolds Stress model. A Santa Catarina River in Monterrey, Mexico, segment defined the computational domain, which produced high-energy, non-repeatable real-world flow conditions where hydrometric data was not yet available. Empirical validation was conducted using surface velocity estimations obtained through high-resolution video analysis. All models were realized on validated polyhedral mesh with consistent boundary conditions, evaluating performance in terms of mean velocity, turbulent viscosity, strain rate, and vorticity. Mean velocity predictions matched the empirical value of 4.43 [m/s]. The Baseline model offered the highest overall fidelity in turbulent viscosity structure (up to 43 [kg/m·s]) and anisotropy representation. Simulation runtimes ranged from 10 to 16 h, reflecting a computational cost that increases with model complexity but justified by improved flow anisotropy representation. Results show that all models yielded similar mean flow predictions within a narrow error margin, yet differed notably in resolving low-velocity zones, turbulence intensity, and anisotropy, within a purely hydrodynamic framework that does not include sediment transport.
- 4 September 2025
- Published by MDPI AG in Preprints.org
Open AccessEnhanced 3D Turbulence Modeling Sensitivity Assessment for Real-World River Hydraulics Under Extreme Storm Conditions: A Case Study of the Santa Catarina River, Mexico
This study compares enhanced turbulence models in a natural river channel 3D simu-lation under extreme hydrometeorological conditions. Using ANSYS Fluent and the Volume of Fluid scheme, five RANS closures were evaluated: realizable k–ε, Renor-malization-Group k–ε, Shear Stress Transport k–ω, Generalized k–ω, and Base-line-Explicit Algebraic Reynolds Stress model. A Santa Catarina River in Monterrey, Mexico, segment defined the computational domain, which produced high-energy, non-repeatable real-world flow conditions where hydrometric data was not yet available. Empirical validation was conducted using surface velocity estimations obtained through high-resolution video analysis. All models were realized on validated polyhedral mesh with consistent boundary conditions, evaluating performance in terms of mean velocity, turbulent viscosity, strain rate, and vorticity. Mean velocity predictions matched the empirical value of 4.43 [m/s]. The Baseline model offered the highest overall fidelity in turbulent viscosity structure (up to 43 [kg/m·s]) and anisotropy representation. Simulation runtimes ranged from 10 to 16 h, reflecting a computational cost that increases with model complexity but justified by improved flow anisotropy representation. Results show that all models yielded similar mean flow predictions within a narrow error margin, yet differed notably in resolving low-velocity zones, turbulence intensity, and anisotropy, within a purely hydrodynamic framework that does not include sediment transport.
- Open Access
- 18 March 2025
- Published by Copernicus GmbH
Three-Dimensional Numerical Modeling of a River Section under Extreme Discharge Conditions from a Tropical Storm: The Santa Catarina River Case Study, Mexico
In this study, the hydrodynamic behavior of a section of the Santa Catarina River in Nuevo León, Mexico, during Tropical Storm Alberto was investigated. A three-dimensional numerical simulation of river flow was performed using unsteady Reynolds-Averaged Navier-Stokes (RANS) equations coupled with the Volume of Fluid (VOF) method to model the water-air interface. The computational domain was constructed based on the specific area Digital Elevation Model (DEM), accurately capturing the river's morphology, with a structured mesh refined near the riverbed to resolve localized velocity gradients. The simulations focused on high-density water flows induced by extreme precipitation, analyzing key parameters, including velocity distribution, turbulence intensity, and effective viscosity, to evaluate the performance of turbulence models in replicating fluvial dynamics. Validation was achieved using velocity data derived from video footage of the storm, tracked via motion analysis techniques and compared against simulation outputs to ensure accuracy.The comparative study included the Spalart-Allmaras, standard k-ε, realizable k-ε, and standard k-ω turbulence models. A sensitivity analysis and mesh independence verification ensured robust numerical predictions validated against field data obtained from video-derived velocity measurements.Findings reveal distinct model performance under varying turbulence conditions. The realizable k-ε model captured peak effective viscosity (μeff) values of up to 820 kg/m·s at low turbulence intensities, demonstrating its suitability for flows with strong energy gradients and lower dissipation rates. Conversely, the standard k-ω model excelled under high turbulence intensity, effectively resolving dissipation dynamics and exhibiting μeff values between 150–500 kg/m·s. These results highlight the capacity of these models to represent different aspects of riverine hydrodynamics, although neither achieved full optimization across all conditions.Velocity profiles showed significant gradients near the riverbed, where high shear stress and energy dissipation dominated, reinforcing the importance of mesh refinement in capturing localized effects. Turbulence intensity exhibited a sharp decrease in shallow areas and near structural boundaries, directly influencing μeff distributions.While the evaluated turbulence models provided reliable frameworks for simulating complex fluvial flows, further refinements are needed. Incorporating advanced turbulence models, such as Reynolds Stress Models (RSM) or Large Eddy Simulations (LES), could enhance predictions, particularly for cases involving sediment transport and fluid-structure interactions.This study contributes to the development of robust methodologies for river modeling under extreme conditions, with practical implications for flood management, hydraulic structure design, and sediment transport assessments. Future research should explore the performance of these models in simulating freshwater flows, assess their application under varying sediment concentrations, and investigate their capability to account for fluid-structure interactions related to bridge columns and other critical infrastructure.
- 18 March 2025
- Published by Copernicus GmbH
Open AccessThree-Dimensional Numerical Modeling of a River Section under Extreme Discharge Conditions from a Tropical Storm: The Santa Catarina River Case Study, Mexico
In this study, the hydrodynamic behavior of a section of the Santa Catarina River in Nuevo León, Mexico, during Tropical Storm Alberto was investigated. A three-dimensional numerical simulation of river flow was performed using unsteady Reynolds-Averaged Navier-Stokes (RANS) equations coupled with the Volume of Fluid (VOF) method to model the water-air interface. The computational domain was constructed based on the specific area Digital Elevation Model (DEM), accurately capturing the river's morphology, with a structured mesh refined near the riverbed to resolve localized velocity gradients. The simulations focused on high-density water flows induced by extreme precipitation, analyzing key parameters, including velocity distribution, turbulence intensity, and effective viscosity, to evaluate the performance of turbulence models in replicating fluvial dynamics. Validation was achieved using velocity data derived from video footage of the storm, tracked via motion analysis techniques and compared against simulation outputs to ensure accuracy.The comparative study included the Spalart-Allmaras, standard k-ε, realizable k-ε, and standard k-ω turbulence models. A sensitivity analysis and mesh independence verification ensured robust numerical predictions validated against field data obtained from video-derived velocity measurements.Findings reveal distinct model performance under varying turbulence conditions. The realizable k-ε model captured peak effective viscosity (μeff) values of up to 820 kg/m·s at low turbulence intensities, demonstrating its suitability for flows with strong energy gradients and lower dissipation rates. Conversely, the standard k-ω model excelled under high turbulence intensity, effectively resolving dissipation dynamics and exhibiting μeff values between 150–500 kg/m·s. These results highlight the capacity of these models to represent different aspects of riverine hydrodynamics, although neither achieved full optimization across all conditions.Velocity profiles showed significant gradients near the riverbed, where high shear stress and energy dissipation dominated, reinforcing the importance of mesh refinement in capturing localized effects. Turbulence intensity exhibited a sharp decrease in shallow areas and near structural boundaries, directly influencing μeff distributions.While the evaluated turbulence models provided reliable frameworks for simulating complex fluvial flows, further refinements are needed. Incorporating advanced turbulence models, such as Reynolds Stress Models (RSM) or Large Eddy Simulations (LES), could enhance predictions, particularly for cases involving sediment transport and fluid-structure interactions.This study contributes to the development of robust methodologies for river modeling under extreme conditions, with practical implications for flood management, hydraulic structure design, and sediment transport assessments. Future research should explore the performance of these models in simulating freshwater flows, assess their application under varying sediment concentrations, and investigate their capability to account for fluid-structure interactions related to bridge columns and other critical infrastructure.
- Open Access
CFD Turbulence Models Assessment for the Cavitation Phenomenon in a Rectangular Profile Venturi Tube
This study investigates cavitation in a rectangular-profile Venturi tube using numerical simulations and four turbulence models. The unsteady Reynolds-averaged Navier–Stokes technique is employed to simulate vapor cloud formation and compared against experimental data. κ-ε realizable, κ-ε RNG, κ-ω SST, and κ-ω GEKO models are evaluated. The simulation results are analyzed for pressure, turbulence, and vapor cloud formation. Discrepancies in cavitation cloud formation among turbulence models are attributed to turbulence and vapor cloud interactions. RNG and SST models exhibit closer alignment with the experimental data, with RNG showing a superior performance. Key findings include significant vapor cloud shape differences across turbulence models. The RNG model best predicts velocity at the throat exit with an error of 4.145%. Static pressure predictions include an error of 4.47%. The vapor cloud length predictions show variation among models, with the RNG model having a 0.386% error for the minimum length and 4.9845% for the maximum length. The SST model exhibits 4.907% and 13.33% errors for minimum and maximum lengths, respectively. Analysis of the cavitation number reveals agreement with the experimental data and sensitivity to cavitation onset. Different turbulence models yield diverse cloud shapes and detachment points. Weber number contours illustrate the variation in the cavitation cloud behavior under different turbulence models.
Open AccessCFD Turbulence Models Assessment for the Cavitation Phenomenon in a Rectangular Profile Venturi Tube
This study investigates cavitation in a rectangular-profile Venturi tube using numerical simulations and four turbulence models. The unsteady Reynolds-averaged Navier–Stokes technique is employed to simulate vapor cloud formation and compared against experimental data. κ-ε realizable, κ-ε RNG, κ-ω SST, and κ-ω GEKO models are evaluated. The simulation results are analyzed for pressure, turbulence, and vapor cloud formation. Discrepancies in cavitation cloud formation among turbulence models are attributed to turbulence and vapor cloud interactions. RNG and SST models exhibit closer alignment with the experimental data, with RNG showing a superior performance. Key findings include significant vapor cloud shape differences across turbulence models. The RNG model best predicts velocity at the throat exit with an error of 4.145%. Static pressure predictions include an error of 4.47%. The vapor cloud length predictions show variation among models, with the RNG model having a 0.386% error for the minimum length and 4.9845% for the maximum length. The SST model exhibits 4.907% and 13.33% errors for minimum and maximum lengths, respectively. Analysis of the cavitation number reveals agreement with the experimental data and sensitivity to cavitation onset. Different turbulence models yield diverse cloud shapes and detachment points. Weber number contours illustrate the variation in the cavitation cloud behavior under different turbulence models.
- Open Access
Numerical Evaluation of the Flow within a Rhomboid Tessellated Pipe Network with a 3 × 3 Allometric Branch Pattern for the Inlet and Outlet
This study presents a comprehensive assessment of the hydrodynamic performance of a novel pipe network with tessellated geometry and allometric scales. Numerical simulations were used to evaluate flow behaviour and pressure drop. The comparison geometry featured a Parallel Pipe Pattern (PPP), while the proposed design employed a Rhombic Tessellation Pattern (RTP). Steady-state simulations were conducted under identical boundary conditions, examining water mass flows ranging from 0.01 to 0.06 kg/s. The results revealed RTP significant advantages over the PPP. The RTP, integrated with a fractal tree pattern, demonstrated remarkable capabilities in achieving uniform flow distribution and maintaining laminar flow regimes across the mass flow rates. Additionally, exhibited an average reduction in pressure drop of 92% resulting in improved efficiency. The Reynolds number at PPP inlet was 5.4 times higher than in the RTP, explaining the considerably higher pressure drop. At a mass flow rate of 0.06 kg/s, the PPP experienced a pressure drop of up to 3.43 kPa, while the RTP’s pressure drop was only 0.350 kPa, highlighting a remarkable decrease of 91.5%. These findings underscore the RTP superior performance in minimizing pressure drop, making it suitable for accommodating higher mass flow rates, thus highlighting its exceptional engineering potential.
Open AccessNumerical Evaluation of the Flow within a Rhomboid Tessellated Pipe Network with a 3 × 3 Allometric Branch Pattern for the Inlet and Outlet
This study presents a comprehensive assessment of the hydrodynamic performance of a novel pipe network with tessellated geometry and allometric scales. Numerical simulations were used to evaluate flow behaviour and pressure drop. The comparison geometry featured a Parallel Pipe Pattern (PPP), while the proposed design employed a Rhombic Tessellation Pattern (RTP). Steady-state simulations were conducted under identical boundary conditions, examining water mass flows ranging from 0.01 to 0.06 kg/s. The results revealed RTP significant advantages over the PPP. The RTP, integrated with a fractal tree pattern, demonstrated remarkable capabilities in achieving uniform flow distribution and maintaining laminar flow regimes across the mass flow rates. Additionally, exhibited an average reduction in pressure drop of 92% resulting in improved efficiency. The Reynolds number at PPP inlet was 5.4 times higher than in the RTP, explaining the considerably higher pressure drop. At a mass flow rate of 0.06 kg/s, the PPP experienced a pressure drop of up to 3.43 kPa, while the RTP’s pressure drop was only 0.350 kPa, highlighting a remarkable decrease of 91.5%. These findings underscore the RTP superior performance in minimizing pressure drop, making it suitable for accommodating higher mass flow rates, thus highlighting its exceptional engineering potential.
- 18 January 2023
- Published by Taylor & Francis in Combustion Theory and Modelling
- Vol. 27 (3) , 375-390
Flame front reconstruction and volume estimation through computational geometry: a case study on machine vision applied to combustion systems
A computationally-supported experimental procedure to estimate the primary dimensions of diffusion flames, using volume reconstruction from thermal imagery, is presented. The experimental setup uses a 4 × 16.94 mm radial distribution gas-burner, with a 0.8 mm nozzle diameter, a thermal imaging camera and a proprietary image processing algorithm. Flame thermal imagery was captured, using four different fuel loads, 350, 650, 950 and 1200 cc/min, from two different visualisation planes, 0° and 90°. The images were visually and qualitatively processed leaving aside the temperature measurement and favouring instead a non-dimensional temperature gradient, . Corresponding flame front structures were estimated and reconstructed employing computational geometry. The height and diameter magnitudes were measured indirectly through a reference length. The results show that at the flame front structure separates itself from the background noise. Furthermore, when compared against available benchmarks, at and , the resulting flame coincides with the luminous and continuous flame heights, respectively. This approach yields maximum relative error of 36.54% and 18.91% for both compared geometries. When compared to image convolution and spatial density clustering procedures, this approach reduces the maximum error obtained by 47%. Based on this information, the methodology presented is considered suitable for dimensioning diffusion flames, thus, proposed as an estimation tool for the design and manufacturing of gas-fuelled appliances/devices.- 18 January 2023
- Published by Taylor & Francis in Combustion Theory and Modelling
- Vol. 27 (3) , 375-390
Flame front reconstruction and volume estimation through computational geometry: a case study on machine vision applied to combustion systems
A computationally-supported experimental procedure to estimate the primary dimensions of diffusion flames, using volume reconstruction from thermal imagery, is presented. The experimental setup uses a 4 × 16.94 mm radial distribution gas-burner, with a 0.8 mm nozzle diameter, a thermal imaging camera and a proprietary image processing algorithm. Flame thermal imagery was captured, using four different fuel loads, 350, 650, 950 and 1200 cc/min, from two different visualisation planes, 0° and 90°. The images were visually and qualitatively processed leaving aside the temperature measurement and favouring instead a non-dimensional temperature gradient, . Corresponding flame front structures were estimated and reconstructed employing computational geometry. The height and diameter magnitudes were measured indirectly through a reference length. The results show that at the flame front structure separates itself from the background noise. Furthermore, when compared against available benchmarks, at and , the resulting flame coincides with the luminous and continuous flame heights, respectively. This approach yields maximum relative error of 36.54% and 18.91% for both compared geometries. When compared to image convolution and spatial density clustering procedures, this approach reduces the maximum error obtained by 47%. Based on this information, the methodology presented is considered suitable for dimensioning diffusion flames, thus, proposed as an estimation tool for the design and manufacturing of gas-fuelled appliances/devices.- Open Access
Numerical Study of Water-Oil Two-Phase Flow Evolution in a Y-Junction Horizontal Pipeline
The work aims to numerically evaluate different injection configurations for the analysis of a two-phase flow behavior and evolution through a staggered Y-junction pipeline. To minimize agglomeration between inlets, the injection zones have a separation distance, avoiding areas with eddies or swirls owing to strong turbulence. Six input scenarios were examined accordingly with injection system experimental data. Results show significant variations because the main fluid develops a swirl over the pipe center. This is generated immediately after the phases’ supply zone due to the oil-phase because it presents a partial pipe flooding, even in the water injection zone. Moreover, the supply configuration has significant relevance to the main flow development. Accordingly, many flow patterns can be achieved depending on the phases’ confluence coming from the supply system. The interface velocities confirm the transition process and flow pattern development, which are driven by the phases’ velocities describing the early stages of three flow patterns formed during the fluids’ confluence. Finally, a substantial extent of the conjunction process points out that caution must be exercised during the injection supply system selection for this type of junction pipeline to achieve a better, and smooth blend, with either narrow, medium, or wide emulsions.
Open AccessNumerical Study of Water-Oil Two-Phase Flow Evolution in a Y-Junction Horizontal Pipeline
The work aims to numerically evaluate different injection configurations for the analysis of a two-phase flow behavior and evolution through a staggered Y-junction pipeline. To minimize agglomeration between inlets, the injection zones have a separation distance, avoiding areas with eddies or swirls owing to strong turbulence. Six input scenarios were examined accordingly with injection system experimental data. Results show significant variations because the main fluid develops a swirl over the pipe center. This is generated immediately after the phases’ supply zone due to the oil-phase because it presents a partial pipe flooding, even in the water injection zone. Moreover, the supply configuration has significant relevance to the main flow development. Accordingly, many flow patterns can be achieved depending on the phases’ confluence coming from the supply system. The interface velocities confirm the transition process and flow pattern development, which are driven by the phases’ velocities describing the early stages of three flow patterns formed during the fluids’ confluence. Finally, a substantial extent of the conjunction process points out that caution must be exercised during the injection supply system selection for this type of junction pipeline to achieve a better, and smooth blend, with either narrow, medium, or wide emulsions.
- 25 April 2022
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 33 (7) , 075406
Image convolution-based experimental technique for flame front detection and dimension estimation: a case study on laminar-to-transition jet diffusion flame height measurement
A computationally-supported experimental technique is presented, to measure height of luminous flames, using convolution and density-based spatial clustering for image processing. The experimental setup employs a high-definition camera array to capture flame imagery from 0°, 45° and 90° visualization planes. The volumetric fuel flow was ranged from 350 to 1800 cc min −1 and images of the resulting flame structure were captured and measured. Results show that output measurements are affected by both the volumetric fuel flow and the visualization plane. Whilst the former is evidently the most significant factor, the latter was found to be relevant, since several flame features, particularly, flame tilt and flickering, are only perceivable through specific visualization planes; attributed to uneven flame structure due non-homogeneous thermal stress. The experimental technique proposed yields an overall statistical tolerance of 1.29 cm and an expanded uncertainty of 0.609 cm (∼11.5%). From these results, the test is considered successful and the proposed experimental technique is deemed to be on par with the already existing ones. The utilization of spatial density clustering of image gridded data has only been tested for this implementation; being severely constrained by the sample size and density variability of the data. Consequently, care should be exercised. Nonetheless, this approach was found to inherently recognize flame front edge, and mitigate variations of pixel value due change in flame intensity, normalizing image processing, hence, it is proposed as a viable alternative for flame feature/structure visualization and estimation, and further research is encouraged.
- 25 April 2022
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 33 (7) , 075406
Image convolution-based experimental technique for flame front detection and dimension estimation: a case study on laminar-to-transition jet diffusion flame height measurement
A computationally-supported experimental technique is presented, to measure height of luminous flames, using convolution and density-based spatial clustering for image processing. The experimental setup employs a high-definition camera array to capture flame imagery from 0°, 45° and 90° visualization planes. The volumetric fuel flow was ranged from 350 to 1800 cc min −1 and images of the resulting flame structure were captured and measured. Results show that output measurements are affected by both the volumetric fuel flow and the visualization plane. Whilst the former is evidently the most significant factor, the latter was found to be relevant, since several flame features, particularly, flame tilt and flickering, are only perceivable through specific visualization planes; attributed to uneven flame structure due non-homogeneous thermal stress. The experimental technique proposed yields an overall statistical tolerance of 1.29 cm and an expanded uncertainty of 0.609 cm (∼11.5%). From these results, the test is considered successful and the proposed experimental technique is deemed to be on par with the already existing ones. The utilization of spatial density clustering of image gridded data has only been tested for this implementation; being severely constrained by the sample size and density variability of the data. Consequently, care should be exercised. Nonetheless, this approach was found to inherently recognize flame front edge, and mitigate variations of pixel value due change in flame intensity, normalizing image processing, hence, it is proposed as a viable alternative for flame feature/structure visualization and estimation, and further research is encouraged.
- Open Access
Numerical Study of Multiphase Water–Glycerol Emulsification Process in a Y-Junction Horizontal Pipeline
This work aims to analyse different injection configurations for the analysis of the emulsification process in a Y-junction staggered horizontal pipeline. The case study comprises a multiphase analysis between two liquids, one with high and the other with low viscosity. Through numerical simulations, it is intended to explain the behaviour and describe the mechanism that produces the water–glycerol emulsification process with three supply zones for both fluids. According to the phase injection scheme, six input scenarios or combinations were analysed. Through strain rate and shear velocity analyses, it was possible to describe the early stages of the emulsification process before a flow pattern is constituted. The results show significant variations concerning the high viscosity fluid, mainly because it presents a partial pipe flooding, even in the injection zone of the low viscosity fluid. The fluid ratio varies according to the input position of the phases. Additionally, a smooth blending process was observed in some scenarios, due to the fact that the continuous phase gradually directs the main fluid to the pipeline centre. The analysis revealed that supply configuration has a significant relevance on the development of the main fluid flow and a substantial extent on the emulsification process.
Open AccessNumerical Study of Multiphase Water–Glycerol Emulsification Process in a Y-Junction Horizontal Pipeline
This work aims to analyse different injection configurations for the analysis of the emulsification process in a Y-junction staggered horizontal pipeline. The case study comprises a multiphase analysis between two liquids, one with high and the other with low viscosity. Through numerical simulations, it is intended to explain the behaviour and describe the mechanism that produces the water–glycerol emulsification process with three supply zones for both fluids. According to the phase injection scheme, six input scenarios or combinations were analysed. Through strain rate and shear velocity analyses, it was possible to describe the early stages of the emulsification process before a flow pattern is constituted. The results show significant variations concerning the high viscosity fluid, mainly because it presents a partial pipe flooding, even in the injection zone of the low viscosity fluid. The fluid ratio varies according to the input position of the phases. Additionally, a smooth blending process was observed in some scenarios, due to the fact that the continuous phase gradually directs the main fluid to the pipeline centre. The analysis revealed that supply configuration has a significant relevance on the development of the main fluid flow and a substantial extent on the emulsification process.